Engineering Commons^™

Calculation Of Scalar Isosurface Area And Applications, Kedar Prashant Shete

Masters Theses

The problem of calculating iso-surface statistics in turbulent flows is interesting for a number of reasons, some of them being combustion modeling, entrainment through turbulent/non-turbulent interfaces, calculating mass flux through iso-scalar surfaces and mapping of scalar fields. A fundamental effect of fuid turbulence is to wrinkle scalar iso-surfaces. A review of the literature shows that iso-surface calculations have primarily been done with geometric methods, which have challenges when used to calculate surfaces that have high complexity, such as in turbulent flows. In this thesis, we propose an alternative integral method and test it against analytical solutions. We present a parallelized …

Behavior Of Prestressed Concrete Bridges With Closure Pour Connections And Diaphragms, Gercelino Ramos

Masters Theses

Accelerated Bridge Construction (ABC) has gained substantial popularity in new bridge construction and bridge deck replacement because it offers innovative construction techniques that result in time and cost savings when compared to traditional bridge construction practice. One technology commonly implemented in ABC to effectively execute its projects is the use of prefabricated bridge components (precast/prestressed bridge components). Precast/prestressed bridge components are fabricated offsite or near the site and then connected on-site using small volume closure pour connections. Diaphragms are also commonly used to strengthen the connection between certain prefabricated components used in ABC, such as beam elements. Bridges containing closure …

A Study On Controlling Power Supply Ramp-Up Time In Sram Pufs, Harshavardhan Ramanna

Masters Theses

With growing connectivity in the modern era, the risk of encrypted data stored in hardware being exposed to third-party adversaries is higher than ever. The security of encrypted data depends on the secrecy of the stored key. Conventional methods of storing keys in Non-Volatile Memory have been shown to be susceptible to physical attacks. Physically Unclonable Functions provide a unique alternative to conventional key storage. SRAM PUFs utilize inherent process variation caused during manufacturing to derive secret keys from the power-up values of SRAM memory cells.

This thesis analyzes the effect of supply ramp-up times on the reliability of SRAM …

The Promise Of Vr Headsets: Validation Of A Virtual Reality Headset-Based Driving Simulator For Measuring Drivers’ Hazard Anticipation Performance, Ganesh Pai Mangalore

Masters Theses

The objective of the current study is to evaluate the use of virtual reality (VR) headsets to measure driving performance. This is desirable because they are several orders of magnitude less expensive and, if validated, could greatly extend the powers of simulation. Out of several possible measures of performance that could be considered for evaluating VR headsets, the current study specifically examines drivers’ latent hazard anticipation behavior both because it has been linked to crashes and because it has been shown to be significantly poorer in young drivers compared to their experienced counterparts in traditional driving simulators and in open …

Topology Network Optimization Of Facility Planning And Design Problems, Ravi Ratan Raj Monga

Masters Theses

The research attempts to provide a graphical theory-based approach to solve the facility layout problem. Which has generally been approached using Quadratic Assignment Problem (QAP) in the past, an algebraic method. It is a very complex problem and is part of the NP-Hard optimization class, because of the nonlinear quadratic objective function and (0,1) binary variables. The research is divided into three phases which together provide an optimal facility layout, block plan solution consisting of MHS (material handling solution) projected onto the block plan. In phase one, we solve for the position of departments in a facility based on flow …

On The Fuel Spray Applications Of Multi-Phase Eulerian Cfd Techniques, Gabriel Lev Jacobsohn

Masters Theses

Eulerian-Eulerian Computational Fluid Dynamics (CFD) techniques continue to show promise for characterizing the internal flow and near-field spray for various fuel injection systems. These regions are difficult to observe experimentally, and simulations of such regions are limited by computational expense or reliance on empiricism using other methods. The physics governing spray atomization are first introduced. Impinging jet sprays and Gasoline Direct Injection (GDI) are selected as applications, and modern computational/experimental approaches to their study are reviewed. Two in-house CFD solvers are described and subsequently applied in several case studies. Accurate prediction of the liquid distribution in a like-doublet impinging jet …

Sustainable Travel Incentives Optimization In Multimodal Networks, Hossein Ghafourian

Masters Theses

Tripod, an integrated bi-level transportation management system, is a smartphone application from the potential user’s point of view which would be instantly accessed prior to performing the trip. Since there are constantly several alternatives for any trip, Tripod considers a series and combination of various parameters, including departure time, mode and route, and rewards for each alternative with a number of redeemable points for goods and services called “Tokens”. The framework responsible for computing the optimized number of tokens awarded to the set of available alternatives in order to minimize the system-wide energy consumption under a constrained Token budget, is …

Optical-Fiber-Based Laser-Induced Cavitation For Dynamic Mechanical Characterization Of Soft Materials, Qian Feng

Masters Theses

In the laser-induced cavitation (LIC) technique, a vapor-gas cavity is generated in water, or a soft material by focusing an intense laser pulse into the sample. The high-strain-rate mechanical properties of these samples can be investigated through a real-time size measurement of the expanding cavity bubble. Although this LIC technique has been applied to multiple research fields such as mechanical, biological and medical areas. It is possible to simplify and improve this LIC method by introducing optical-fibers. In this approach, we propose to employ an optical-fiber to deliver the intense laser pulse to an arbitrary position of an optical opaque …

Markov Decision Process Approach To Strategize National Breast Cancer Screening Policy In Data-Limited Settings, Vijeta Deshpande

Masters Theses

Early diagnosis is a promising strategy to reduce premature mortalities and for optimal use of resources. But the absence of mathematical models specific to the data settings in LMIC’s impedes the construction of economic analysis necessary for decision-makers in the development of cancer control programs. This thesis presents a new methodology for parameterizing the natural history model of breast cancer based on data availabilities in low and middle income countries, and formulation of a control optimization problem to find the optimal screening schedule for mammography screening, solved using dynamic programming. As harms and benefits are known to increase with the …

Computational Fluid Dynamics Models Of Electromagnetic Levitation Experiments In Reduced Gravity, Gwendolyn Bracker

Masters Theses

Electromagnetic levitation experiments provide a powerful tool that allows for the study of nucleation, solidification and growth in a containerless processing environment. Containerless processing allows for the study of reactive melts at elevated temperatures without chemical interactions or contamination from a container. Further, by removing the interface between the liquid and its container, this processing technique allows for greater access to the undercooled region for solidification studies. However, in these experiments it is important to understand the magnetohydrodynamic flow within the sample and the effects that this fluid flow has on the experiment.

A recent solidification study found that aluminum-nickel …

Advanced Virtual Reality Headset Based Training To Improve Young Drivers’ Latent Hazard Anticipation Ability, Ravi Agrawal

Masters Theses

Driving safety among young novice driver is one of the largest concern in the transportation domain. Many Paper-based or PC- based training program have been developed over the years to train the young novice driver to improve their driving skills (Hazard Anticipation). This training programs does help young novice driver to improve their situational awareness and so the hazard anticipation skills. But, there is one common problem with most of the currently available training programs. They are not very immersive, because such training program mostly provide plain view of the training scenario’s along with some description about the scenario and …

The Umass Experimental X-Band Radar (Umaxx): An Upgrade Of The Casa Ma-1 To Support Cross-Polarization Measurements, Jezabel Vilardell Sanchez

Masters Theses

Ground-based radars are instruments commonly used to surveil the precipitation climate of the surrounding areas. Weather events are characterized by collecting backscatter data and analyzing computed products such as the Reflectivity Factor, the Doppler Velocity, the Spectrum Width, the Differential Reflectivity, the Co-polar Correlation Coefficient and the Differential Propagation Phase. The ability of the radar to transmit different polarization waves, such as horizontal and vertical polarization, allow for further analysis of the weather given the capability to perform co-polar and cross-polar measurements. The Linear Depolarization Ratio is another computed product based on the difference in power between the co-polarized and …

Electrospinning Nanofibers From Chitosan-Hyaluronic Acid Complex Coacervates, Juanfeng Sun

Masters Theses

Electrospun nanofibers have been used for many applications, but a reliance on organic solvents limits their use in biomedical fields. In this study, we successfully electrospun nanofibers from aqueous chitosan-hyaluronic acid complex coacervates. We studied how solvent’ properties affected the average nanofiber diameter by using pure water as a solvent versus ethanol-water solutions. Experimentally, we investigated the effect of electrospinning apparatus parameters, such as how the applied voltage affected fiber formation and morphology. The smallest average nanofiber diameter was determined to be around 115 ± 30 nm when 3 wt% ethanol coacervate samples were electrospun using the applied voltage of …

A Computational Simulation Model For Predicting Infectious Disease Spread Using The Evolving Contact Network Algorithm, Buyannemekh Munkhbat

Masters Theses

Commonly used simulation models for predicting outbreaks of re-emerging infectious diseases (EIDs) take an individual-level or a population-level approach to modeling contact dynamics. These approaches are a trade-off between the ability to incorporate individual-level dynamics and computational efficiency. Agent-based network models (ABNM) use an individual-level approach by simulating the entire population and its contact structure, which increases the ability of adding detailed individual-level characteristics. However, as this method is computationally expensive, ABNMs use scaled-down versions of the full population, which are unsuitable for low prevalence diseases as the number of infected cases would become negligible during scaling-down. Compartmental models use …

Modeling The Effect Of New Commuter Bus Service On Demand And The Impact On Ghg Emissions: Application To Greater Boston, Christopher Lyman

Masters Theses

The transportation sector is considered one of the major contributors to greenhouse gas (GHG) emissions in metropolitan areas, and any efforts to reduce these emissions requires strategic management of multiple transportation modes. This paper presents a method to identify opportunities to reduce GHG emissions by expanding commuter bus services and incentives to shift commuters from private cars to transit. The approach uses a nested multinomial logit model for mode choice in a region that includes driving alone, carpooling, walking, cycling, and using four possible transit modes (ferry, commuter rail, rapid transit and bus) by walk access or driving access. A …

Improving Resilience Of Communication In Information Dissemination For Time-Critical Applications, Rajvardhan Somraj Deshmukh

Masters Theses

Severe weather impacts life and in this dire condition, people rely on communication, to organize relief and stay in touch with their loved ones. In such situations, cellular network infrastructure\footnote{We refer to cellular network infrastructure as infrastructure for the entirety of this document} might be affected due to power outage, link failures, etc. This urges us to look at Ad-hoc mode of communication, to offload major traffic partially or fully from the infrastructure, depending on the status of it.

We look into threefold approach, ranging from the case where the infrastructure is completely unavailable, to where it has been replaced …

Forecasting The Cost Of Electricity Generated By Offshore Wind Turbines, Timothy Costa

Masters Theses

To impede the progress of climate change, many policy makers are considering avenues to decarbonize electricity production. In addition to decarbonization, policy makers must consider how the cost of electricity will impact various stakeholders, balancing cost and social benefits. Offshore wind farms have the potential to produce affordable, carbon-free electricity, but they are a relatively new technology. The relative juvenescence of offshore wind lends itself to an uncertain future, regarding production costs. In this thesis, we seek to understand cost drivers behind offshore wind electricity by analyzing historic trends in offshore wind levelized cost of electricity (LCOE) through learning curves, …

Energy Efficiency Of Computation In All-Spin Logic: Projections And Fundamental Limits, Zongya Chen

Masters Theses

Built with nanomagnets, a spintronic device called the all-spin logic (ASL) device carries information with only spin currents, resulting in a low power supply--10 mV. This voltage is 100 times smaller than the conventional CMOS devices (usually 0.8~1V). The potential for improved energy efficiency made possible by the low operating voltage of ASL makes it one of the most promising devices among its post-CMOS competitors.

The basic working principles of ASL device are introduced in this thesis and two complementary approaches to studying energy efficiency of computation are applied to a common set of ASL circuits: (1) a circuit simulation …

Analysis Of Adhesive Anchorage Systems Under Extreme In-Service Temperature Conditions, Rachel Wang

Masters Theses

Adhesive anchorage systems have found widespread use in structural applications, including bridge widening, concrete repair and rehabilitation, and barrier retrofitting. Because these applications typically require adhesive anchorage systems to be installed outdoors, the effects of climate conditions and day-to-day temperature fluctuations on adhesive behavior and performance should be considered. The purpose of this thesis is to simulate pullout tests of adhesive anchorage systems for threaded rod and reinforcing bars and to emulate effects under various temperature conditions through the use of finite element analysis. Results from the finite element simulation are then compared to the physical tests conducted at UMass …

Ammonia Production From A Non-Grid Connected Floating Offshore Wind-Farm: A System-Level Techno-Economic Review, Vismay V. Parmar

Masters Theses

According to U.S. Department of Energy, offshore wind energy has the potential to generate 7,200 TWh of energy annually, which is nearly twice the current annual energy consumption in the United States. With technical advances in the offshore wind industry, particularly in the floating platforms, windfarms are pushing further into the ocean. This creates new engineering challenges for transmission of energy from offshore site to onshore. One possible solution is to convert the energy produced into chemical energy of ammonia, which was investigated by Dr. Eric Morgan. In his doctoral dissertation, he assessed the technical requirements and economics of a …

Performance Of Concrete Tunnel Systems Subject To Fault Displacement, Michael Morano

Masters Theses

A Finite Element Analysis (FEA) investigation of concrete tunnel systems traversing seismic faults is carried out to determine how to effectively mitigate the stresses induced in the liner when subject to fault displacement. A parametric study of various fault parameters, both in the damage zone and competent rock, is carried out to determine the site conditions which induce the most stress on the tunnel liner system. Results indicate that friction angle, cohesion, and elastic modulus of fault zones have varying effects on the stresses induced on the liner. The width of damage zone and expected displacements are also investigated and …

Insar Simulations For Swot And Dual Frequency Processing For Topographic Measurements, Gerard Masalias Huguet

Masters Theses

In Earth remote sensing precise characterization of the backscatter coefficient is important to extract valuable information about the observed target. A system that eliminates platform motion during near-nadir airborne observations is presented in this thesis, showing an improvement on the accuracy of measurements for a Ka- band scatterometer previously developed at Microwave Remote Sensing Laboratory (MIRSL). These very same results are used to simulate the reflectivity of such targets as seen from a spaceborne radar and estimate height errors based on mission-specific geometry. Finally, data collected from a dual-frequency airborne interferometer com- prised by the Ka-band system and an S-band …

High Fidelity Modeling Of Cold-Formed Steel Single Lap Shear Screw Fastened Connections, Rita Kalo

Masters Theses

Cold-formed steel connections are commonly fastened using self-tapping self-drilling screws. The behavior of these connections can differ based on the screw manufacturer or the cold-formed steel product used, both of which have a large selection available for use in industry. Because of their popularity and the many possible variations of these connections, researchers have frequently tested screw connections to characterize their behavior. However, repeatedly conducting this type of experiment is time consuming and expensive. Therefore, the purpose of this work was to create finite element models that can successfully predict the behavior of single lap shear screw connections, a common …

The Evacuation Problem In Multi-Story Buildings, Quang Hong Cung

Masters Theses

The pressure from high population density leads to the creation of high-rise structures within urban areas. Consequently, the design of facilities which confront the challenges of emergency evacuation from high-rise buildings become a complex concern. This paper proposes an embedded program which combines a deterministic (GMAFLAD) and stochastic model (M/G/C/C State Dependent Queueing model) into one program, GMAF_MGCC, to solve an evacuation problem. An evacuation problem belongs to Quadratic Assignment Problem (QAP) class which will be formulated as a Quadratic Set Packing model (QSP) including the random flow out of the building and the random pairwise traffic flow among activities. …