Engineering Commons^™

A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, And Material Testing For Component Remanufacturing, Xinchang Zhang, Wenyuan Cui, Wei Li, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Metallic components can gain defects such as dents, cracks, wear, heat checks, deformation, etc., that need to be repaired before reinserting into service for extending the lifespan of these parts. In this study, a hybrid process was developed to integrate reverse engineering, pre-repair processing, additive manufacturing, and material testing for the purpose of part remanufacturing. Worn components with varied defects were scanned using a 3D scanner to recreate the three-dimensional models. Pre-repair processing methods which include pre-repair machining and heat-treatment were introduced. Strategies for pre-repair machining of defects including surface impact damage, surface superficial damage and cracking were presented. Pre-repair …

Generation Of Nondiffracting Vector Beams With Ring-Shaped Plasmonic Metasurfaces, Yuchao Zhang, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Nondiffracting Bessel, Mathieu, and Weber vector beams are generated by using ring-shaped plasmonic geometric metasurfaces. The nondiffracting vector beam is produced by the superposition of two off-axis right-handed and left-handed circularly polarized nondiffracting scalar beams described by the Whittaker integral, which are simultaneously generated by a single metasurface with the ring-shaped phase profile. The polarization states of the generated nondiffracting vector beams are analyzed by the Stokes parameters and the orbital angular momentum states are measured by the beam interference. In addition, the selfhealing properties of nondiffracting vector beams are further demonstrated, showing that not only the beam profiles but …

Analysis Of Geometric Accuracy And Thickness Reduction In Multistage Incremental Sheet Forming Using Digital Image Correlation, Mercedes M. Gonzalez, Nathan A. Lutes, Joseph D. Fischer, Mitchell R. Woodside, Douglas A. Bristow, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Incremental Sheet Forming (ISF) is a freeform manufacturing method whereby a 3D geometry is created by progressively deforming a metal sheet with a single point tool following a defined trajectory. The thickness distribution of a formed part is a major consideration of the process and is believed to be improved by forming the geometry in multiple stages. This paper describes a series of experiments in which truncated cone geometries were formed using two multistage methods and compared to the same geometry formed using the traditional single stage method. The geometric accuracy and thickness distributions, including 3D thickness distribution plots, of …

Data-Driven Integral Reinforcement Learning For Continuous-Time Non-Zero-Sum Games, Yongliang Yang, Liming Wang, Hamidreza Modares, Dawei Ding, Yixin Yin, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This paper develops an integral value iteration (VI) method to efficiently find online the Nash equilibrium solution of two-player non-zero-sum (NZS) differential games for linear systems with partially unknown dynamics. To guarantee the closed-loop stability about the Nash equilibrium, the explicit upper bound for the discounted factor is given. To show the efficacy of the presented online model-free solution, the integral VI method is compared with the model-based off-line policy iteration method. Moreover, the theoretical analysis of the integral VI algorithm in terms of three aspects, i.e., positive definiteness properties of the updated cost functions, the stability of the closed-loop …

Novel And Efficient Parasitic Decoupling Network For Closely Coupled Antennas, Min Li, Lijun Jiang, Kwan Lawrence Yeung

Electrical and Computer Engineering Faculty Research & Creative Works

A novel and efficient parasitic decoupling network (PDN) is proposed for closely coupled antennas in this paper, which provides a new perspective and approach to design DNs based on the parasitic decoupling concept. The PDN is composed of sections of transmission lines (TLs) and reactive components, allowing additional power-traveling paths. With the TL lengths and reactive component reactance being precisely determined, the traveling power from one antenna to another could cancel out the undesired power wave induced by mutual coupling, resulting in the high port isolation. The decoupling theory is rigorously derived with the design procedure of the PDN systematically …

Source Reconstruction Method Based On Machine Learning Algorithms, He Ming Yao, Lijun Jiang, Wei E.I. Sha

Electrical and Computer Engineering Faculty Research & Creative Works

This paper proposes a new source reconstruction method (SRM) based on deep learning. The conventional SRM usually requires oversampled measurements data to ensure higher accuracy. Thus, conventional SRM numerical system is usually highly singular. A deep convolutional neural network (ConvNet) is proposed to reconstruct the equivalent sources of the target to overcome difficulty. The deep ConvNet allows us to employ less data samples. Besides, the ill-conditioned numerical system can be effectively avoided. Numerical examples are presented to demonstrate the feasibility and accuracy of the proposed method. Its performance is also compared with the traditional neural network and interpolation method. Moreover, …

Global Engineering And Language Attitudes In The U.S.: A Quandary, Jorge Porcel

Arts, Languages and Philosophy Faculty Research & Creative Works

No abstract provided.

Analysis Of The Topological Photonic Crystals Using Finite-Difference Supercell Approach, Menglin L.N. Chen, Li (Lijun) Jun Jiang, Zhihao Lan, Wei E.I. Sha

Electrical and Computer Engineering Faculty Research & Creative Works

Topological photonic systems have been explored extensively due to the robust electromagnetic states they support. In this work, we propose a finite-difference supercell approach to analyze the topological property of photonic crystal (PC) structures. Meanwhile, the pseudospin polarized edge states at the interface of two PC structures with different topologies are studied. The direction of the energy flow is found to be determined by the helicity of the pseudospin polarization.

Effect Of Slm Build Parameters On The Compressive Properties Of 304l Stainless Steel, Okanmisope Fashanu, Mario F. Buchely, Myranda Spratt, Joseph William Newkirk, K. Chandrashekhara, Heath Misak, Michael Walker

Materials Science and Engineering Faculty Research & Creative Works

Selective laser melting (SLM) is well suited for the efficient manufacturing of complex structures because of its manufacturing methodology. The optimized process parameters for each alloy has been a cause for debate in recent years. In this study, the hatch angle and build orientation were investigated. 304L stainless steel samples were manufactured using three hatch angles (0◦, 67◦, and 105◦) in three build orientations (x-, y-, and z-direction) and tested in compression. Analysis of variance and Tukey's test were used to evaluate the obtained results. Results showed that the measured compressive yield strength and plastic flow stress varied when the …

Follow-Up And Kinetic Model Selection Of Dinitro Pentamethylene Tetramine (Dpt), Hany A. Elazab, M. M. Seleet, Said M.A. Hassanein, M. A. Radwan, M. A. Sadek

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Synthetic route of Cyclotetramethylene Tetramine is implemented through the reaction of hexamine and nitrating mixture that is formed as a result of a reaction between ammonium nitrate and fuming nitric acid. The reaction medium includes acetic acid, acetic anhydride and p-formaldehyde. This synthetic pathway is relatively long and both of hexamine dinitrate and Dinitro Pentamethylene Tetramine (DPT) are considered as the two main intermediate compounds. The former compound (hexamine dinitrate) was prepared, purified, and then characterized. Conversion of hexamine dinitrate into DPT has been followed up experimentally at different temperatures. Various factors including temperature and time has been investigated. …

Uav/Satellite Multiscale Data Fusion For Crop Monitoring And Early Stress Detection, V. Sagan, M. Maimaitijiang, P. Sidike, M. Maimaitiyiming, H. Erkbol, S. Hartling, K. T. Peterson, J. Peterson, Joel Gerard Burken, F. Fritschi

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Early stress detection is critical for proactive field management and terminal yield prediction, and can aid policy making for improved food security in the context of climate change and population growth. Field surveys for crop monitoring are destructive, labor-intensive, time-consuming and not ideal for large-scale spatial and temporal monitoring. Recent technological advances in Unmanned Aerial Vehicle (UAV) and high-resolution satellite imaging with frequent revisit time have proliferated the applications of this emerging new technology in precision agriculture to address food security challenges from regional to global scales. In this paper, we present a concept of UAV and satellite virtual constellation …

Monitoring Of Cure State Through The Use Of Microwaves, David Judd, Frank Gramling, Reza Zoughi, Mohammad Tayeb Ahmad Ghasr

Electrical and Computer Engineering Faculty Research & Creative Works

A method of manufacturing a tire is provided that includes curing the tire (10) in a curing press (12) and applying microwave energy at a given frequency band into the tire. The interaction between the microwave energy and the tire is monitored to obtain a complex reflection coefficient. A root-mean-squared error is calculated using the measured complex reflection coefficient and a reference reflection coefficient. The reference reflection coefficient is from a fully cured tire made from the same material as the tire. Continuous monitoring of the interaction takes place to obtain the complex reflection coefficient along …

Controlling Structures Of Battery Electrodes, Jonghyun Park, Jie Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Manufacturing an electrode by forming an electrode structure on a grounded conductive substrate and applying a voltage across the electrode structure to generate an electric field through the electrode structure to arrange the dipolar particles within the electrode structure.

Advanced Removal Of 4-Nitrophenol By Emerging And Intensifying Technology Of Emulsion Liquid Membrane With Magnetic Nanoparticles, Qusay Al-Obaidi, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

4-nitrophenol is one of the phenolic compounds found in industrial wastes that needs to be removed from treated wastewater. Emulsion liquid membrane (ELM) has been introduced as a developing technology for advanced wastewater and water treatment. This emerging technology of treatment can be intensified by strategically adding nanoparticles to organic membrane phase (O). To facilitate the industrial implementation of ELM with nanoparticles, we used magnetic iron nanoparticles added to the organic phase (O) in order to recover them by a magnet for reuse. This also assists in de-emulsification step. The results show that with the use of 1% (W/W) of …

Calculation And Tabulation Of Efficiencies For Tungsten Foil Positron Moderators, R. Alsulami, M. Albarqi, S. Jaradat, Shoaib Usman, Joseph T. Graham

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Monte Carlo radiation transport simulations were used to calculate the positron stopping profiles in tungsten positron moderator foils. Stopping profiles were numerically integrated with efficiency kernels derived from Green's function solutions of the 3D diffusion equation to determine the moderation efficiency in both the backscattering and transmission geometries. Stopping profiles and efficiencies were calculated for positron energies from 10 keV to 10 MeV and incident angles from 0° to 75°. The resulting efficiencies agreed with other calculated and measured values in the literature, especially when similar values of the positron diffusion length and surface emission branching ratio were used. Large …

Vision Sensor Based Action Recognition For Improving Efficiency And Quality Under The Environment Of Industry 4.0, Zipeng Wang, Ruwen Qin, Jihong Yan, Chaozhong Guo

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the environment of industry 4.0, human beings are still an important influencing factor of efficiency and quality which are the core of product life cycle management. Hence, monitoring and analyzing humans' actions are essential. This paper proposes a vision sensor based method to evaluate the accuracy of operators' actions. Each action of operators is recognized in real time by a Convolutional Neural Network (CNN) based classification model in which hierarchical clustering is introduced to minimize the effects of action uncertainty. Warnings are triggered when incorrect actions occur in real time and applications of action analysis of workers on a …

Investigation Of Microwave-Assisted Synthesis Of Palladium Nanoparticles Supported On Fe3o4 As Efficient Recyclable Magnetic Catalysts For Suzuki-Miyaura Cross-Coupling, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this research, a facile and reproducible approach was implemented for the synthesis of palladium nanoparticles supported on Fe₃O₄ with remarkable activity as an ideal catalyst for Suzuki-Miyaura cross-coupling. Magnetite supported Pd nanoparticles reveal high activity in Suzuki-Miyaura coupling reactions since they could be recycled up to seven times with the same high catalytic activity. This adopted method of catalyst synthesis has many advantages, including reproducibility and the reliability of the adopted synthetic method. The produced catalyst has unique magnetic properties to facilitate catalyst recovery from the reaction mixture by using a strong magnet as an external …

Fast Yield Estimation Of Multi-Band Patch Antennas By Pc-Kriging, Xiaosong Du, Leifur Leifsson, Slawomir Koziel

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The PC-Kriging metamodeling method is proposed for yield estimation of multi-band patch antennas. PC-Kriging is a combination of polynomial chaos expansion (PCE) and Kriging metamodeling, where PCE is used as a trend function for the Kriging interpolation metamodel. The method is demonstrated on the Ishigami analytical function and a dual-band patch antenna. The PC-Kriging is shown to reach the prescribed accuracy limit with significantly fewer training points than both PCE and Kriging. This translates into considerable computational savings of yield estimation over alternative metamodel-based procedures and direct EM-driven Monte Carlo simulation. The saving are obtained without compromising evaluation reliability.

Mechanical Properties Of Heusler Alloys, Wesley Everhart, Joseph William Newkirk

Materials Science and Engineering Faculty Research & Creative Works

Heusler alloys have been a significant topic of research due to their unique electronic structure, which exhibits half-metallicity, and a wide variety of properties such as magneto-calorics, thermoelectrics, and magnetic shape memory effects. As the maturity of these materials grows and commercial applications become more near-term, the mechanical properties of these materials become an important factor to both their processing as well as their final use. Very few studies have experimentally investigated mechanical properties, but those that exist are reviewed within the context of their magnetic performance and application space with specific focus on elastic properties, hardness and strength, and …

Modeling And Experimental Determination Of Physical Properties Of Ge X Ga Y Se 1-X-Y Chalcogenide Glasses Ii: Optical And Thermal Properties, Jason Lonergan, Charmayne Lonergan, John Mccloy, Kathleen A. Richardson

Materials Science and Engineering Faculty Research & Creative Works

This study systematically analyzed the correlation between topological structure and chemical ordering on the optical and thermal properties of synthesized material in the glass forming region of the Ge_xGa_ySe_1-x-y ternary. A series of ten compositions from 5 to 30 mol% Ge and 5 to 15 mol% Ga were examined within the ternary, showing broadband infrared properties with transmission from 1 to 25 μm. Topological constraint theory applied to compositions examined exhibited sharp inflection at the average coordination number of = 2.67 defined as the chemical threshold where the glass network consists of tetrahedral Ge(Ga)Se_{2 …}

A 2d/Q-2d Subdomain Finite Element Method For Irregular Power/Ground Plate-Pair Analysis With Waveport Excitation, Ping Li, Li (Lijun) Jun Jiang, Yao Jiang Zhang, Shuai Xu, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

The field distribution of a power/ground plane can be fully characterized by TMzmn modes, where the electric fields have both azimuthal and longitudinal components and the magnetic fields have only the azimuthal component. Thus, if the magnetic fields are defined to be the unknowns in the finite element method (FEM) used for the analysis of the power/ground plane structure, the analysis becomes a quasi-two dimensional (Q-2D) problem. Since the high-order modes are evanescent, they are tightly confined to the near region of the vias guarded by anti-pads; while in the regions sufficiently far from the anti-pads, only the fundamental mode …

In Situ Nmr Parameter Monitoring Systems And Methods For Measuring Ph And Temperature, Ming Huang, Lingyu Chi, Rex E. Gerald Ii, Jie Huang, Annalise R. Pfaff, Klaus Woelk

Electrical and Computer Engineering Faculty Research & Creative Works

Devices and methods are provided for measuring temperatures and pHs of a sample in situ using NMR spectroscopy, and for sealing one or more ends of a capillary tube after a reference material has been added to the capillary tube, which is used in an in situ NMR temperature measurement device. A method for measuring a pH of a sample in situ using NMR spectroscopy includes providing an in situ NMR pH measurement device. This device includes a sample housing member configured to house a target sample, at least one pH sensor configured to exhibit an NMR spectral change due …

The Decoupling Methods For Increasing The Isolation Between Two Antennas, Min Li, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presented the parasitic structure decoupling method and other related approaches to increase the isolation between two closely coupled antennas. The design parameters of the resultant decoupling structures based on the proposed methods can be precisely derived instead of fitted to achieve high antenna isolations. A two-element monopole array is employed as a benchmark to demonstrate the effectiveness of the proposed methods. The simulation results show that good impedance matching and high port isolation could be achieved simultaneously based on the proposed methods.

A Review Of Field Oil-Production Response Of Injection-Well Gel Treatments, Munqith Aldhaheri, Mingzhen Wei, Na Zhang, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As life-span extenders, bulk gels have been widely applied to rejuvenate oil production from uneconomic producers in mature oil fields by improving the sweep efficiency of improved-oil-recovery (IOR)/enhanced-oil-recovery (EOR) floods. This paper presents a comprehensive review of the responses of injection-well gel treatments implemented between 1985 and 2014. The survey includes 61 field projects compiled from SPE papers and US Department of Energy reports. Seven parameters related to the oil-production response were evaluated according to the reservoir lithology, formation type, and recovery process, using univariate analysis and stacked histograms. The interquartile-range (IQR) method was used to detect the underperforming and …

Program Progress Performance Report #4, Missouri University Of Science And Technology. Inspire - University Transportation Center

Semi-Annual Progress Reports

No abstract provided.

Mass Accommodation At A High-Velocity Water Liquid-Vapor Interface, J. Nie, A. Chandra, Z. Liang, P. Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We Use Molecular Dynamics to Determine the Mass Accommodation Coefficient (MAC) of Water Vapor Molecules Colliding with a Rapidly Moving Liquid-Vapor Interface. This Interface Mimics Those Present in Collapsing Vapor Bubbles that Are Characterized by Large Interfacial Velocities. We Find that at Room Temperature, the MAC is Generally Close to Unity, and Even with Interfaces Moving at 10 Km/s Velocity, It Has a Large Value of 0.79. using a Simplified Atomistic Fluid Model, We Explore the Consequences of Vapor Molecule Interfacial Collision Rules on Pressure, Temperature, and Density of a Vapor Subjected to an Incoming High-Velocity Liquid-Vapor Interface.

Method And Apparatus For Fabricating Ceramic And Metal Components Via Additive Manufacturing With Uniform Layered Radiation Drying, Ming-Chuan Leu, Amir Ghazanfari, Wenbin Li, Greg Hilmas, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A freeform extrusion fabrication process for producing three - dimensional ceramic, metal and functionally gradient composite objects, including the steps of filling a plurality of paste sources with a respective plurality of aqueous paste compositions, operationally connecting respective syringes containing respective aqueous paste compositions to a mix ing chamber, moving a first aqueous paste composition from a first respective paste source into the mixing chamber, moving a second aqueous paste composition from a second respective paste source into the mixing chamber, mixing the first and second aqueous paste compositions to define a first admixture having a first admixture composition, extruding …

Modeling And Experimental Determination Of Physical Properties Of Ge X -Ga Y -Se 1-X-Y Chalcogenide Glasses I: Structure And Mechanical Properties, Jason Lonergan, Charmayne Lonergan, John Mccloy, Kathleen A. Richardson

Materials Science and Engineering Faculty Research & Creative Works

A series of ten Ge_xGa_ySe_1-x-y glasses within the topological constraint regime of = 2.3 to 2.8 were processed for physical property testing to compare measured to calculated property values enabling further understanding of structure-related mechanical property evolution. Average bond energies were calculated for each glass to elucidate structure and property relationships. Raman analysis was performed to correlate the topological constraint theory to experimentally determined structural units. Young's modulus and Vickers hardness, respectively, were shown to increase with increasing coordination number from 14.42 GPa and 911 MPa at = 2.4 to 29.44 GPa and 2295 MPa …

Strength Of Steel-To-Steel Screw Connections -- Update To Provisions, Thomas Stevens, Thomas Sputo, Jennifer Bridge

American Iron and Steel Institute (AISI) Specifications, Standards, Manuals and Research Reports (1946 - present)

The objective of this project is to review the existing provisions of the AISI S100-16 North American Specification for Cold-Formed Steel Structural Members, for screw connections loaded in shear and tension (but not combined actions). A recent study by the Steel Deck Institute (Sputo 2017) revealed possible unconservative results for screw pull-over, particularly in thinner sheets and/or lower ductility.

This study performed a comprehensive analysis of available steel-to-steel screw connection strength test data, totaling 702 shear tests, 143 pull-over tests, and 335 pull-out tests. The tested strength of these connections was compared to the predicted strength from the existing …

Revisiting The Butler-Mokrys Model For The Vapor-Extraction Process, Vijitha Mohan, Partho Neogi, Baojun Bai

Chemical and Biochemical Engineering Faculty Research & Creative Works

The dynamics of a process in which a solvent in the form of a vapor or gas is introduced in a heavy-oil reservoir is considered. The process is called the solvent vapor-extraction process (VAPEX). When the vapor dissolves in the oil, it reduces its viscosity, allowing oil to flow under gravity and be collected at the bottom producer well. The conservation-of-species equation is analyzed to obtain a more-appropriate equation that differentiates between the velocity within the oil and the velocity at the interface, which can be solved to obtain a concentration profile of the solvent in oil. We diverge from …