Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2019

Materials Science and Engineering

Journal

Institution
Keyword
Publication

Articles 1 - 30 of 119

Full-Text Articles in Engineering

Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan Dec 2019

Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan

Journal of Electrochemistry

The electrochromic behaviors of polyaniline films were investigated by potential step and cyclic voltammetry coupled with UV viscosity photometer. The polyaniline films show colorful changes from pale yellow to green and then to blue. Electrochromic stability, electrochemical behavior, coloring performance, optical properties and surface formations of the produced films were studied in detail. The working electrode was the flexible PANI electrode, and the counter electrode and the reference electrode were a platinum sheet and Ag/AgCl, respectively. The in situ optical transmittance of the PANI film at 650 nm was measured using an ultraviolet-visible-near-infrared spectrophotometer (Shimadzu UV-3101PC) combining with a square …

Go to article

Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong Dec 2019

Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong

Journal of Electrochemistry

P-nitrothiophenol (PNTP) is one of the most common probe molecules studied by surface-enhanced Raman spectroscopy (SERS). The research in electrochemical reduction behavior of PNTP will help understanding the mechanism for the nitrobenzene reduction. In this paper, we used transient electrochemical surface-enhanced Raman spectroscopy (TEC-SERS) to study the SERS of PNTP with cyclic voltammetry and chronoamperometry on gold electrodes. The results show that the TEC-SERS provide a time resolution that equals the transient electrochemical methods, and we concluded that the reaction was so quick that we did not observe the spectral information of intermediate species described in the literatures with a …

Go to article

Quantitative Detection Of Levofloxacin Hydrochloride By Differential Pulse Stripping Voltammetry With Electrodeposited Bismuth Film Electrodes, Zi-Ying Guo, Zuo-Peng Li, Jiang Li, Jian-Guo Zhao, Feng Feng Dec 2019

Quantitative Detection Of Levofloxacin Hydrochloride By Differential Pulse Stripping Voltammetry With Electrodeposited Bismuth Film Electrodes, Zi-Ying Guo, Zuo-Peng Li, Jiang Li, Jian-Guo Zhao, Feng Feng

Journal of Electrochemistry

In this study, differential pulse stripping voltammetry was developed for the quantitative detection of levofloxacin hydrochloride indirectly. Levofloxacin hydrochloride contains organic amine, which can be precipitated upon interaction with Zn(SCN)42-. By means of differential pulse stripping voltammetry, the concentration of Zn2+ can be determined using an in-situ formed bismuth film electrode, which allows determining indirectly the amount of levofloxacine hydrochloride. The linearity equation, I = 1.1401c - 0.5309 with the correlative coefficient R = 0.9979, was presented in the experiment. The results showed that this approach is very sensitive, having a limitation of detection of 3.18 …

Go to article

Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang Dec 2019

Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang

Journal of Electrochemistry

An advance method for preparing polyaniline-coated hollow sulfur material using sublimate material ADD(2,4,6-tri(propan-2-yl)-1,3,5-trioxane) as a template was developed for lithium-sulfur battery. At first, the smashed ADD particles were coated by a sulfur layer through the reaction of Na2S2O3 with diluted HCl. Then polyaniline layer was coated again on the surface of sulfur layer through the reaction of aniline with (NH4)2S2O8. After being dried at 60 oC for 12 h, the ADD in such a composite evaporated totally, and resulted in the formation of polyaniline-coated hollow sulfur …

Go to article

Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan Dec 2019

Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan

Journal of Electrochemistry

Aiming at the on-site and quick safety evaluation of the dissolved trace copper ions (Cu2+) in drinking water source, an electrochemical detection platform was developed on the basis of the square wave anodic stripping voltammetry using the gold nanoparticles (Au NPs) modified glassy carbon electrode, where Au NPs were deposited via electrochemical cyclic voltammetry. The proposed method displayed the limit of detection as low as 1.3 μg·L-1 in the linear range of 2 ~ 50 μg·L-1. The proposed method was applied to the determination of Cu2+ in the midstream of Minjiang River, one of …

Go to article

Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang Dec 2019

Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Large amount of organic saline wastewater is generated from various chemical industries. The contents of organic saline wastewater are more and more complicated as they are created from different types of industries. Directly discharging the organic saline wastewater without pre-treatment can generate severe environmental problem and waste useful resources. It is necessary to use an economical method to treat the organic saline wastewater and recover the salt into useful materials to achieve resource reuse. Bipolar-membrane electrodialysis (BMED) is one of the methods that can remove salt from the wastewater and convert it into certain acid and base with higher value …

Go to article

Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian Dec 2019

Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian

Journal of Electrochemistry

In this paper, we studied the electrochemical behaviors of azopurine on polished gold electrodes with cyclic voltammetry (CV). On the basis of analyzing scan rate and peak current, it was supposed that the redox process belonged to a reversible process controlled by adsorption in 0.2 mol·L-1 PBS (pH = 4.0 ~ 10.0) solutions. The potentials of redox peaks moved more negatively with increasing pH value. This proved that the H+ proton has participcted in the electrochemical reaction. The further data analysis and the calculation of surface adsorption excess demonstrated that the reaction was a two-proton and two-electron process. …

Go to article

Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu Dec 2019

Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu

Journal of Electrochemistry

To study the optimal removal condition, adsorption mechanism and comparative analysis of the three typical cationic pollutants, i.e., Zn(II), anionic pollutant Cr(VI) and molecular pollutant sulfamethoxazole (SMX), using self-made upflowed electro-sorption device for adsorptions of above three pollutants by modified activated carbon fiber were researched. The activated carbon fiber (ACF) was modified by hydrochloric acid. The ACF morphology and structure before and after modification were characterized by SEM, BET and FTIR. The characterization results show that the modified ACF had fewer surface impurities than the modified surface and the gully is more obvious, the specific surface area was increased by …

Go to article

Electrochemical Sensor Based On Magnetic Electrode Modified With Magnetic Molecularly Imprinted Nanoparticles Immobilized Hemoglobin For Determination Of Hydrogen Peroxide, Yang Yuan, Jia-Xin Wang, Yu-Hua Cao Dec 2019

Electrochemical Sensor Based On Magnetic Electrode Modified With Magnetic Molecularly Imprinted Nanoparticles Immobilized Hemoglobin For Determination Of Hydrogen Peroxide, Yang Yuan, Jia-Xin Wang, Yu-Hua Cao

Journal of Electrochemistry

In this work, the surface-imprinted technique was used to prepare magnetic hemoglobin (Hb) imprinted nanoparticles, using Fe3O4@SiO2 NPs as the carrier, Hb as the template molecule, and tetraethyl orthosilicate (TEOS) as the imprinted polymer monomer. The nanoparticles had a core-shell structure, with magnetic Fe3O4 NPs as the core and Hb imprinted polymers as the shell. Therefore, Hb could be concentrated and fixed on the surface of the magnetic imprinted nanoparticles (MMIPs NPs). Furthermore, MMIPs NPs were immobilized with chitosan (CS) on the surface of a magnetic electrode to constitute Hb enzyme-like biosensor …

Go to article

Ionic Liquid Assisted Synthesis Of Porous Carbons From Rice Husk For Supercapacitors, Han-Fang Zhang, Feng Wei, Jian Sun, Meng-Ying Jing, Xiao-Jun He Dec 2019

Ionic Liquid Assisted Synthesis Of Porous Carbons From Rice Husk For Supercapacitors, Han-Fang Zhang, Feng Wei, Jian Sun, Meng-Ying Jing, Xiao-Jun He

Journal of Electrochemistry

It is still a challenge to prepare carbon materials with high specific surface area at low cost from renewable resources. Herein, the authors report an efficient approach to synthesize porous carbons (PCs) from rice husk with ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6)) as a template and an activation agent. The as-made PCs featured the high specific surface area up to 1438 m2·g-1. As electrodes for supercapacitors, PCs showed a high specific capacitance of 256 F·g-1 at 0.05 A·g-1 in 6 mol·L-1 KOH aqueous electrolyte and a good rate performance of 211 F·g …

Go to article

Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao Dec 2019

Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao

Journal of Electrochemistry

In this work, hydrothermal reaction and high temperature were used to grow ZnCo2O4 active materials on Ni foam. The crystal stuctures and surface morphlogies of four samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The electrochemical performances were characterized by cyclic voltammetry (CV)、galvanostatic charge/discharge (GCD) testing and electrochemical impedance spectroscopy (EIS) on an electrochemical station. It can be seen that active materials tended to form denser stuctures with an increasing amount of NH4F in the solution system and four different morphologies of ZnCo2O …

Go to article

Zif-67-Derived Ag/Co-Embedded N-Enriched Mesoporous Carbon For Oxygen Reduction Reaction, Zheng-Ling Di, Jing Zhu, Lei Dai, Wei Meng, Yue-Hua Li, Zhang-Xing He, Ling Wang Dec 2019

Zif-67-Derived Ag/Co-Embedded N-Enriched Mesoporous Carbon For Oxygen Reduction Reaction, Zheng-Ling Di, Jing Zhu, Lei Dai, Wei Meng, Yue-Hua Li, Zhang-Xing He, Ling Wang

Journal of Electrochemistry

Nitrogen-doped porous carbon materials are considered as one of the most promising catalysts for oxygen reduction reaction (ORR). Herein, in order to further improve the activity of the nitrogen-doped porous carbon, Ag/Co bimetal is embedded into nitrogendoped porous carbon to form Ag/Co-embedded nitrogen-doped porous carbon material (AgCo@NC). The AgCo@NC was derived by the wet impregnation of Ag+ into ZIF-67 precursor, followed by chemical reduction and a subsequent pyrolysis process under Ar atmosphere at different temperatures (500 ℃, 600 ℃, 700 ℃). The morphologic characterization shows that the Ag/Co nanoparticles were successfully embedded in the mesoporous carbon framework with abundant nitrogen …

Go to article

Electrochemical Properties Of Sulfur In Different Carbon Support Materials, Bo Zhang, Jia Liu, Xiao-Chen Liu, De-Jun Li Dec 2019

Electrochemical Properties Of Sulfur In Different Carbon Support Materials, Bo Zhang, Jia Liu, Xiao-Chen Liu, De-Jun Li

Journal of Electrochemistry

In order to investigate the effect of carbon structure on electrochemical performance of sulfur/carbon composite in lithium-sulfur battery, in this paper, sublimation sulfur was incorporated into three types of carbon materials, namely, graphene, carbon black and porous carbon. The three sulfur/carbon composites were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray diffraction (XRD) techniques, and their electrochemical performances were also studied. The results showed that the sulfur/porous carbon composite offered an initial discharge capacity of 1623.2 mA·h·g-1 and remained 845 mA·h·g-1 after 100 cycles. Compared with graphene and carbon black, the mesopores and micropores in porous …

Go to article

Effect Of Incorporating Pottery And Bottom Ash As Partial Replacement Of Cement, Bassam A. Tayeh, Doha M. Alsaffar, Lawend K. Askar, Asmahan Issa Jubeh Dec 2019

Effect Of Incorporating Pottery And Bottom Ash As Partial Replacement Of Cement, Bassam A. Tayeh, Doha M. Alsaffar, Lawend K. Askar, Asmahan Issa Jubeh

Karbala International Journal of Modern Science

This study addressed the environmental constraints in cement produc­tion. Ordinary Portland cement (OPC) was replaced with pottery powder (PP, produced by grinding locally available pottery) and bottom ash (BA) at 10%, 20% and 30% of cement mass. Moreover, 4% calcium chloride solution (CaCl2.2H2O) was used as mixing water. Material properties, such as standard consistency, setting time and compressive strength, were measured with different percentages of OPC replacement with PP and BA. Results indicated that the replacement with PP and BA increased the water demand to achieve the standard consistency. These results revealed that the strength evolution …

Go to article

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir Dec 2019

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Go to article

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman Dec 2019

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Go to article

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono Dec 2019

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Go to article

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer Dec 2019

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Go to article

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda Dec 2019

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Go to article

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar Dec 2019

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Go to article

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani Dec 2019

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

Go to article

Piezoceramic-Polymer And Piezoceramic-Cement Composites: A Brief Review, S Inthong, S Eitssayeam, J Tontrakoon, T Tunkasiri Dec 2019

Piezoceramic-Polymer And Piezoceramic-Cement Composites: A Brief Review, S Inthong, S Eitssayeam, J Tontrakoon, T Tunkasiri

Journal of Metals, Materials and Minerals

The physical properties of piezoceramic-polymers and lead-based or lead-free - Portland cement or geopolymer are described as part of this brief review. The connectivities such as 0-3, 1-3, 2-2 and 3-3 were employed to fabricate the composites. Their physical properties such as dielectric, coupling constant, acoustic impedance etc. were measured. The acoustic impedance obtained from the PZT-epoxy resin (0-3/1-3 connectivity) showed quite low. This can be further developed to match with water or human tissue for both hydrophone and medical applications. The properties of the composites containing leadbased or lead-free cement or geopolymer were also revealed. The results prove that …

Go to article

Optical And Luminescence Investigation Of Er3+ Doped In Na2o-Al2o3-P2o5 Glasses For Photonics Material Application, N Chanthima, N Kiwsakunkran, J Kaewkhao, N Sangwaranatee Dec 2019

Optical And Luminescence Investigation Of Er3+ Doped In Na2o-Al2o3-P2o5 Glasses For Photonics Material Application, N Chanthima, N Kiwsakunkran, J Kaewkhao, N Sangwaranatee

Journal of Metals, Materials and Minerals

Optical and photoluminescence properties of Er3+ doped Na2O-Al2O3-P2O5 (NAPEr) glasses were prepared by conventional melt quenching technique at 1200°C. The absorption spectra have 11 peaks corresponded to 4I15/2 ground state to various excited energy levels. The absorption band at 1537 nm shows highest intensity in near-infrared (NIR) region. Also, it can be observed that the intensity of absorption bands increased on increase in concentrations of Er2O3. The Judd-Ofelt (JO) parameters (Ωλ, λ = 2, 4, and 6) are calculated using the absorption bands of the Er2O3 doped glass compositions. McCumber theory has been applied to determine the emission cross-sections (σe) …

Go to article

Evaluating The Grinding Process Of Granites Using The Physico-Mechanical And Mineralogical Properties, S Kahraman, M Ucurum, E Yogurtcuoglu, M Fener Dec 2019

Evaluating The Grinding Process Of Granites Using The Physico-Mechanical And Mineralogical Properties, S Kahraman, M Ucurum, E Yogurtcuoglu, M Fener

Journal of Metals, Materials and Minerals

Granitic rocks are sometimes ground for different purposes. Predicting the mean particle size (d50) is useful for planning and cost estimation of purposes. In order to investigate the possibility of predicting the d50 of ground rock from the physico-mechanical rock properties, six different granites were tested in the laboratory. First, the d50 values were correlated with the corresponding physico-mechanical properties. The simple regression analysis showed that there were no good correlations between the d50 and the physico-mechanical properties. Then, the multiple regression analysis was carried out and strong prediction equations were developed. It was also shown that the dominant parameter …

Go to article

Use Of Steam Explosion As A Green Alternative Method To Prepare Pulp From Pineapple Leaves, S Tanpichai, A Boonmahitthisud, S Witayakran Dec 2019

Use Of Steam Explosion As A Green Alternative Method To Prepare Pulp From Pineapple Leaves, S Tanpichai, A Boonmahitthisud, S Witayakran

Journal of Metals, Materials and Minerals

The use of agricultural wastes as an alternative form of the cellulosic material to wood has gained considerable attention due to the reduction of deforestation. After cultivation, a large number of pineapple leaves are considered as a waste. Here, the potential steam explosion process was used as a green alternative way to prepare pulp from pineapple leaves without any addition of the chemical treatments. The pineapple leaf fibers were defibrillated from fiber bundles due to the rapid depressurization with the steam pressure between 16 and 20 kgf·cm-2. The partly removal of hemicellulose and lignin associated with the increase of the …

Go to article

Corrosion Of Ecaped Magnesium Alloys And Its Background: A Review, G Manjunath Naik, N Sannayellappa, S Selvin Satheesh Kumar Dec 2019

Corrosion Of Ecaped Magnesium Alloys And Its Background: A Review, G Manjunath Naik, N Sannayellappa, S Selvin Satheesh Kumar

Journal of Metals, Materials and Minerals

The aim of this review article is to provide a brief mechanistic overview of magnesium alloys, equal channel angular pressing and corrosion behavior of un-ECAPed and ECAPed Mg alloys. The considerate of the corrosion processes of ECAPed Mg alloys builds upon interpretation of the corrosion of fine-grain magnesium alloys. This provides an understanding of the effect of grain size on corrosion of Mg alloys. This deep understanding is essential as a foundation if we are to produce corrosion-resistant magnesium alloys. Considerable has previously been accomplished, but there is enormous scope for development. This present concise review can provide a foundation …

Go to article

Corrosion Behaviors Of Ship Structural Steel In Simulated Marine Tidal Environment, N Jaiyos, E Viyanit, P Mungsantisuk, K Sirivedin Dec 2019

Corrosion Behaviors Of Ship Structural Steel In Simulated Marine Tidal Environment, N Jaiyos, E Viyanit, P Mungsantisuk, K Sirivedin

Journal of Metals, Materials and Minerals

The tidal zone is severe marine environment for steel structures due to its wet-dry cyclic corrosion pattern. Regarding a specific application for inner ship hull, ship structural steel is always prone to corrosion dealing with three marine environments, including atmospheric, tidal, and immersion zones. Therefore, the current study aimed to investigate corrosion behaviors of two commercial ship structural steels, i.e. alloys A and B, which were exposed to simulated marine tidal environment. The effects of specimen arrangements designated as the isolated short-scale and vertical long-scale specimens were also determined. Based on weight loss determination, it revealed that the corrosion rates …

Go to article

Isothermal Aging Of Al-Ni-Sc Alloy Containing Al3ni Microfibers And Al3sc Nanoprecipitates, C Suwanpreecha, J P. Toinin, P Pandee, D C. Dunand, C Limmaneevichitr Dec 2019

Isothermal Aging Of Al-Ni-Sc Alloy Containing Al3ni Microfibers And Al3sc Nanoprecipitates, C Suwanpreecha, J P. Toinin, P Pandee, D C. Dunand, C Limmaneevichitr

Journal of Metals, Materials and Minerals

Binary Al-Sc alloys have excellent strength at room and elevated temperature up to 300°C due to coherent of Al3Sc nanoprecipitates. Binary Al-Ni alloys are an alternative alloy for high-temperature applications owing to high-thermal stability of Al3Ni microfibers. In this study, the hardness evolution at 300°C for up to 672 h for eutectic ternary Al-6Ni-0.4Sc (wt%) was studied and compared with binary Al-0.4Sc and Al-6Ni alloys. The Al-6Ni alloy maintains a constant hardness after aging at 300°C up to 672 h. Both Al-0.4Sc and Al-6Ni-0.4Sc alloys show strong precipitation strengthening response, with peak hardness reached after about 3 h aging, due …

Go to article

Effect Of Post Weld Heat Treatment Soaking Time On Microstructure And Mechanical Properties Of Tig Welded Grade 91 Steel, K Mithun, K Saraswathamma, D K. Verma Dec 2019

Effect Of Post Weld Heat Treatment Soaking Time On Microstructure And Mechanical Properties Of Tig Welded Grade 91 Steel, K Mithun, K Saraswathamma, D K. Verma

Journal of Metals, Materials and Minerals

Development of new alloy materials is in progress to improve thermal efficiency of supercritical boilers. One of such material is modified 9Cr-1Mo (Grade 91) martensitic alloy steel referred as T/P91. This material is extensively used in high temperature applications such as fabrication of superheater, reheater and economizer sections of a boiler. The present study is made to find the effect of post weld heat treatment (PWHT) soaking time on microstructure and mechanical properties of TIG welded ASTM A213 Grade 91 steel plate. Experiments were conducted for PWHT at 760°C for different soaking time such as 2, 4 and 6 hours …

Go to article

Synthesis And Luminescence Properties Of Camoo4:Sm3+ Phosphors For Orange Photonic Materials, N Luewarasirikul, J Kaewkhao, H Kim Dec 2019

Synthesis And Luminescence Properties Of Camoo4:Sm3+ Phosphors For Orange Photonic Materials, N Luewarasirikul, J Kaewkhao, H Kim

Journal of Metals, Materials and Minerals

The series of CaMoO4 samples with different melting temperature (600, 700, 800 and 900°C) were synthesized in this work to investigate their phase structures by X-ray diffraction (XRD). The XRD result confirmed that the crystalline structures of the phosphors were obtained at 800°C (tetragonal structure with I41/a space group). Then, the series of Ca1-xMoO4:Smx (where x = 0.005, 0.010, 0.015, 0.020, 0.025 and 0.030) were prepared by solid-state reaction method to study their luminescence properties. The absorption spectra, recorded in UV, Vis and NIR regions, showed peaks at 405, 465, 952, 1096, 1252, 1405, 1513, 1573 and 1629 nm. The …

Go to article

Next Last