Engineering Commons^™

Electrochemical Preparation And Photocatalytic Performance Of Lanio3/Tio2 Nanotube Arrays, Cheng Gong, Ze-Yang Zhang, Si-Wan Xiang, Lan Sun, Chen-Qing Ye, Chang-Jian Lin

Journal of Electrochemistry

The LaNiO₃/TiO₂ nanotube arrays were prepared by pulse electrodeposition combined with high temperature annealing. The LaNiO₃ nanoparticles modified on the TiO₂ nanotube arrays had small particle size (< 10 nm), uniform distribution and controllable loading. Some LaNiO3 nanoparticles were deposited inside the TiO₂ nanotubes. The UV-visible absorption spectra displayed that the absorption band edge of LaNiO₃/TiO₂ nanotube arrays was obviously red-shifted as compared with that of TiO₂ nanotube arrays, and the visible light absorption was enhanced significantly. The photocatalytic degradation results of rhodamine B (RhB) under visible light showed that the LaNiO₃/TiO₂ nanotube arrays prepared by pulse electrodeposition for 500 cycles had …

Electrochemical Cycling Stability Of Polyaniline Films In Different Color Ranges, Kun Xu, Kai-Ling Zhou, Hao Wang, Jing-Bing Liu, Hui Yan

Journal of Electrochemistry

The electrochromic behaviors of polyaniline films were investigated by potential step and cyclic voltammetry coupled with UV viscosity photometer. The polyaniline films show colorful changes from pale yellow to green and then to blue. Electrochromic stability, electrochemical behavior, coloring performance, optical properties and surface formations of the produced films were studied in detail. The working electrode was the flexible PANI electrode, and the counter electrode and the reference electrode were a platinum sheet and Ag/AgCl, respectively. The in situ optical transmittance of the PANI film at 650 nm was measured using an ultraviolet-visible-near-infrared spectrophotometer (Shimadzu UV-3101PC) combining with a square …

Transient Electrochemical Surface-Enhanced Raman Spectroscopic Study In Electrochemical Reduction Of P-Nitrothiophenol, Yun Ling, Jing Tang, Guo-Kun Liu, Cheng Zong

Journal of Electrochemistry

P-nitrothiophenol (PNTP) is one of the most common probe molecules studied by surface-enhanced Raman spectroscopy (SERS). The research in electrochemical reduction behavior of PNTP will help understanding the mechanism for the nitrobenzene reduction. In this paper, we used transient electrochemical surface-enhanced Raman spectroscopy (TEC-SERS) to study the SERS of PNTP with cyclic voltammetry and chronoamperometry on gold electrodes. The results show that the TEC-SERS provide a time resolution that equals the transient electrochemical methods, and we concluded that the reaction was so quick that we did not observe the spectral information of intermediate species described in the literatures with a …

Quantitative Detection Of Levofloxacin Hydrochloride By Differential Pulse Stripping Voltammetry With Electrodeposited Bismuth Film Electrodes, Zi-Ying Guo, Zuo-Peng Li, Jiang Li, Jian-Guo Zhao, Feng Feng

Journal of Electrochemistry

In this study, differential pulse stripping voltammetry was developed for the quantitative detection of levofloxacin hydrochloride indirectly. Levofloxacin hydrochloride contains organic amine, which can be precipitated upon interaction with Zn(SCN)₄^2-. By means of differential pulse stripping voltammetry, the concentration of Zn²⁺ can be determined using an in-situ formed bismuth film electrode, which allows determining indirectly the amount of levofloxacine hydrochloride. The linearity equation, I = 1.1401c - 0.5309 with the correlative coefficient R = 0.9979, was presented in the experiment. The results showed that this approach is very sensitive, having a limitation of detection of 3.18 …

Polyaniline Coated Hollow Sulfur Prepared Using Sublimate 2,4,6-Tri(Propan-2-Yl)-1,3,5-Trioxane As Template For Sulfur Electrode, Zhang-Feng Li, Xiao-Rui Wang, Wen-Sheng Tian, Jin-Ze Yang, Ping Zhang, Li-Ping Ma, Yang Chen, Xiao-Li Cui, Zhi-Yu Jiang

Journal of Electrochemistry

An advance method for preparing polyaniline-coated hollow sulfur material using sublimate material ADD(2,4,6-tri(propan-2-yl)-1,3,5-trioxane) as a template was developed for lithium-sulfur battery. At first, the smashed ADD particles were coated by a sulfur layer through the reaction of Na₂S₂O₃ with diluted HCl. Then polyaniline layer was coated again on the surface of sulfur layer through the reaction of aniline with (NH₄)₂S₂O₈. After being dried at 60 ^oC for 12 h, the ADD in such a composite evaporated totally, and resulted in the formation of polyaniline-coated hollow sulfur …

Electrochemical Determination Of Trace Copper Ions In Drinking Water Source, Jing-Ji Peng, Hong Zheng, Yi-Song Zou, Guo-Kun Liu, Dong-Xing Yuan

Journal of Electrochemistry

Aiming at the on-site and quick safety evaluation of the dissolved trace copper ions (Cu²⁺) in drinking water source, an electrochemical detection platform was developed on the basis of the square wave anodic stripping voltammetry using the gold nanoparticles (Au NPs) modified glassy carbon electrode, where Au NPs were deposited via electrochemical cyclic voltammetry. The proposed method displayed the limit of detection as low as 1.3 μg·L^-1 in the linear range of 2 ~ 50 μg·L^-1. The proposed method was applied to the determination of Cu²⁺ in the midstream of Minjiang River, one of …

Bipolar-Membrane Electrodialysis Method To Treat Industrial High Saline Perfume Wastewater, Jian Zhang, Dong-Fang Niu, Shuo-Zhen Hu, Xin-Sheng Zhang

Journal of Electrochemistry

Large amount of organic saline wastewater is generated from various chemical industries. The contents of organic saline wastewater are more and more complicated as they are created from different types of industries. Directly discharging the organic saline wastewater without pre-treatment can generate severe environmental problem and waste useful resources. It is necessary to use an economical method to treat the organic saline wastewater and recover the salt into useful materials to achieve resource reuse. Bipolar-membrane electrodialysis (BMED) is one of the methods that can remove salt from the wastewater and convert it into certain acid and base with higher value …

Electrochemical Behaviors Of Azopurine On Gold Electrodes, Ming-Xue Li, Hang Shi, Jia Liu, Meng Zhang, Jian-Zhang Zhou, De-Yin Wu, Zhong-Qun Tian

Journal of Electrochemistry

In this paper, we studied the electrochemical behaviors of azopurine on polished gold electrodes with cyclic voltammetry (CV). On the basis of analyzing scan rate and peak current, it was supposed that the redox process belonged to a reversible process controlled by adsorption in 0.2 mol·L^-1 PBS (pH = 4.0 ~ 10.0) solutions. The potentials of redox peaks moved more negatively with increasing pH value. This proved that the H⁺ proton has participcted in the electrochemical reaction. The further data analysis and the calculation of surface adsorption excess demonstrated that the reaction was a two-proton and two-electron process. …

Study On Electro-Sorption Of Heavy Metals And Sulfamethoxazole On Activated Carbon Fibers, Wen-Jun Zhao, Bing-Xin Jia, Ya-Nan Zhang, Jiu-Nian Guan, Jiao Qu, Ying Lu

Journal of Electrochemistry

To study the optimal removal condition, adsorption mechanism and comparative analysis of the three typical cationic pollutants, i.e., Zn(II), anionic pollutant Cr(VI) and molecular pollutant sulfamethoxazole (SMX), using self-made upflowed electro-sorption device for adsorptions of above three pollutants by modified activated carbon fiber were researched. The activated carbon fiber (ACF) was modified by hydrochloric acid. The ACF morphology and structure before and after modification were characterized by SEM, BET and FTIR. The characterization results show that the modified ACF had fewer surface impurities than the modified surface and the gully is more obvious, the specific surface area was increased by …

Electrochemical Sensor Based On Magnetic Electrode Modified With Magnetic Molecularly Imprinted Nanoparticles Immobilized Hemoglobin For Determination Of Hydrogen Peroxide, Yang Yuan, Jia-Xin Wang, Yu-Hua Cao

Journal of Electrochemistry

In this work, the surface-imprinted technique was used to prepare magnetic hemoglobin (Hb) imprinted nanoparticles, using Fe₃O₄@SiO₂ NPs as the carrier, Hb as the template molecule, and tetraethyl orthosilicate (TEOS) as the imprinted polymer monomer. The nanoparticles had a core-shell structure, with magnetic Fe₃O₄ NPs as the core and Hb imprinted polymers as the shell. Therefore, Hb could be concentrated and fixed on the surface of the magnetic imprinted nanoparticles (MMIPs NPs). Furthermore, MMIPs NPs were immobilized with chitosan (CS) on the surface of a magnetic electrode to constitute Hb enzyme-like biosensor …

Ionic Liquid Assisted Synthesis Of Porous Carbons From Rice Husk For Supercapacitors, Han-Fang Zhang, Feng Wei, Jian Sun, Meng-Ying Jing, Xiao-Jun He

Journal of Electrochemistry

It is still a challenge to prepare carbon materials with high specific surface area at low cost from renewable resources. Herein, the authors report an efficient approach to synthesize porous carbons (PCs) from rice husk with ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF₆)) as a template and an activation agent. The as-made PCs featured the high specific surface area up to 1438 m²·g^-1. As electrodes for supercapacitors, PCs showed a high specific capacitance of 256 F·g^-1 at 0.05 A·g^-1 in 6 mol·L^-1 KOH aqueous electrolyte and a good rate performance of 211 F·g …

An Aptasensor Based On Aunps/Pani/Tnts Nanocomposite For Electrochemical Detection Of Tobramycin, Yong-Ling Nong, Ni-Na Qiao, Ying Liang

Journal of Electrochemistry

A novel well-constructed electrochemical aptamer-based sensor for the detection of tobramycin was presented, using differential pulse voltammetry (DPV) as a detection technique and methylene blue（MB） as an electrochemical indicator. A glassy carbon electrode modified with a nanocomposite of Au nanoparticles/polyaniline/titania nanotubes (AuNPs/PANI/TNTs) was constructed as the electrode scaffold. The nanocomposite was characterized by transmission electron microscopy and X-ray photoelectron spectroscopy in detail. The results of cyclic voltammetry and electrochemical impedance measurements demonstrated that the AuNPs/PANI/TNTs nanocomposites can improve greatly the electron transfer on the interface. For the detection of tobramycin, the DPV results showed a linear relationship between the current …

Morphology Controlled Preparations And Electrochemical Properties Of Znco2O4 Electrode Materials For Supercapacitors, Yue-Shen Zhou, Meng Li, Shuang Wu, Zhao-Lei Li, Yan-Min Gao

Journal of Electrochemistry

In this work, hydrothermal reaction and high temperature were used to grow ZnCo₂O₄ active materials on Ni foam. The crystal stuctures and surface morphlogies of four samples were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The electrochemical performances were characterized by cyclic voltammetry (CV)、galvanostatic charge/discharge (GCD) testing and electrochemical impedance spectroscopy (EIS) on an electrochemical station. It can be seen that active materials tended to form denser stuctures with an increasing amount of NH₄F in the solution system and four different morphologies of ZnCo₂O …

Zif-67-Derived Ag/Co-Embedded N-Enriched Mesoporous Carbon For Oxygen Reduction Reaction, Zheng-Ling Di, Jing Zhu, Lei Dai, Wei Meng, Yue-Hua Li, Zhang-Xing He, Ling Wang

Journal of Electrochemistry

Nitrogen-doped porous carbon materials are considered as one of the most promising catalysts for oxygen reduction reaction (ORR). Herein, in order to further improve the activity of the nitrogen-doped porous carbon, Ag/Co bimetal is embedded into nitrogendoped porous carbon to form Ag/Co-embedded nitrogen-doped porous carbon material (AgCo@NC). The AgCo@NC was derived by the wet impregnation of Ag+ into ZIF-67 precursor, followed by chemical reduction and a subsequent pyrolysis process under Ar atmosphere at different temperatures (500 ℃, 600 ℃, 700 ℃). The morphologic characterization shows that the Ag/Co nanoparticles were successfully embedded in the mesoporous carbon framework with abundant nitrogen …

Electrochemical Properties Of Sulfur In Different Carbon Support Materials, Bo Zhang, Jia Liu, Xiao-Chen Liu, De-Jun Li

Journal of Electrochemistry

In order to investigate the effect of carbon structure on electrochemical performance of sulfur/carbon composite in lithium-sulfur battery, in this paper, sublimation sulfur was incorporated into three types of carbon materials, namely, graphene, carbon black and porous carbon. The three sulfur/carbon composites were characterized by scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET), and X-ray diffraction (XRD) techniques, and their electrochemical performances were also studied. The results showed that the sulfur/porous carbon composite offered an initial discharge capacity of 1623.2 mA·h·g^-1 and remained 845 mA·h·g^-1 after 100 cycles. Compared with graphene and carbon black, the mesopores and micropores in porous …

Evaluation Of The Mechanisms And Effectiveness Of Nano-Hydroxides, Wood And Dairy Manure-Derived Biochars To Remove Fluoride And Heavy Metals From Water, Anna Rose Wallace, Wenjie Sun Dr, Chunming Su Dr

Civil and Environmental Engineering Theses and Dissertations

The development of effective treatment processes for the removal contaminants, such as fluoride and heavy metals, from polluted water have been urgently needed due to serious environmental health and safety concerns. In this dissertation, a variety of materials including various (hydro)oxide nanomaterials, biochars and surface modified biochar were studied to evaluate their effectiveness and mechanism on removing fluoride or mixed heavy metals from water.

In the Chapter 2, this study investigated the adsorptive removal of fluoride from water using various (hydro)oxide nanomaterials, focusing on ferrihydrite, hydroxyapatite (HAP) and brucite, which have the potential to be used as sorbents for surface …

Low Temperature Liquid Metal Batteries For Energy Storage Applications, Cameron A. Lippert, Kunlei Liu, James Landon, Susan A. Odom, Nicolas E. Holubowitch

Center for Applied Energy Research Faculty Patents

The present invention relates to a molten metal battery of liquid bismuth and liquid tin electrodes and a eutectic electrolyte. The electrodes may be coaxial and coplanar. The eutectic electrolyte may be in contact with a surface of each electrode. The eutectic electrolyte may comprise ZnC1₂:KCI.

High-Pressure Studies On The Transition From Red Phosphorus To Black Phosphorus, Heng Xiang

Electronic Thesis and Dissertation Repository

Black phosphorus (BP) is a promising material in many research fields. However, the transition process from amorphous red phosphorus (ARP) is elusive and hence hinders large scale synthesis and applications. This work describes the application of the high-pressure method to study the transition process from ARP to BP.

In this thesis, the following three objectives were achieved: (1) to understand the mechanism of the transition, (2) to facilitate the synthesis of BP by taking the advantage of less pure ARP, (3) to propose new methods of synthesizing BP-based materials, such as the moderately oxidized BP and the black phosphorus/ amorphous …

Instrumentation For Dynamic Nuclear Polarization And Application Of Electron Decoupling For Electron Relaxation Measurement, Nicholas Howard Alaniva

Arts & Sciences Electronic Theses and Dissertations

Dynamic nuclear polarization nuclear magnetic resonance (DNP NMR) exploits internal electron spin and nuclear spin interactions to increase sensitivity and uncover valuable information regarding structure and dynamics of a system. To manipulate these interactions, instrumentation is developed to combine high-power microwave and radiofrequency irradiation with the ability to spin samples at the magic angle (MAS) at temperatures from 90 K to 4.2 K. Electron decoupling uses frequency-modulated microwaves to mitigate the electron-nuclear dipolar interaction, improving signal intensity and resolution in DNP NMR experiments. Electron decoupling is combined with short DNP periods to encode electron spin information in polarized nuclear signal. …

Zirconia-Based Compositions For Use In Passive NoX Adsorber Devices, Deborah Jayne Harris, David Alastair Scapens, John G. Darab, Mark Crocker, Yaying Ji

Chemistry Faculty Patents

A passive NO_x adsorbent includes: palladium, platinum or a mixture thereof and a mixed or composite oxide including the following elements in percentage by weight, expressed in terms of oxide: 10-90% by weight zirconium and 0.1-50% by weight of least one of the following: a transition metal or a lanthanide series element other than Ce.

Although the passive NO_x adsorbent can include Ce in an amount ranging from 0.1 to 20% by weight expressed in terms of oxide, advantages are obtained particularly in the case of low-Ce or a substantially Ce-free passive NO_x adsorbent.

Artificial Bee Colony Algorithm For Solving Fuzzy Multi-Objective Bed Allocation Model, Abdulhakeem Luqman Hasan

Karbala International Journal of Modern Science

With the improvement of the medical services frameworks rivalry, hospitals face more and more challenges. In the interim, allotment of resource has a crucial influence on performing competitive benefits in a hospitals. To choose the suitable beds number is one of the most essential tasks in hospital administration. Anyway, in true condition, bed allotment choice is a multiple-side problem with weakness and haphazardness of the information available. It is so sophisticated. Therefore, the research about bed allotment difficulty is comparatively rare under considering multiple departments, nursing hours, and stochastic information about arrival and service of patients. In this paper, we …

Development Of Forward Osmosis Based Separations: A Novel Approach In Membrane Technology, Yu-Hsuan Chiao

Graduate Theses and Dissertations

Tackling the worldwide severe water shortage, the membrane technology is considered to be the most efficient approach and hence, used widely as a cost-effective sustainable solution. “Forward osmosis (FO)” has been the major attention in recent time. FO uses osmotic pressure as the driving force to draw the water passing the membrane and achieve the desired separation performance. In general, it is considered to be a process with tremendous potential to resolve the present-day water shortage with extremely low energy consumption. However, the challenges of membrane and draw solution regeneration associated with FO processes must be conquered prior to their …

Study Of Amorphous Boron Carbide And Hydrogenated Boron Carbide Materials Using Molecular Dynamics And Hybrid Reverse Monte Carlo, Rajan Khadka

MSU Graduate Theses

We present a computational study of amorphous boron carbide (a-B_xC) models using Molecular Dynamics (MD) studied with Stillinger-Weber (SW) and ReaxFF potential. The atomic structure factor (S(Q)), radial distribution function (RDF) and bond lengths comparison with other experimental and ab initio models shows that a random arrangement of icosahedra (B₁₂, B₁₁C) interconnected by chains (CCC, CBC) are present in a-B_xC. Afterward, Hybrid Reverse Monte Carlo (HRMC) technique is used to recreate a-B_xC structures. The existing SW potential parameters of Boron are optimized for the α-rhombohedral (Icosahedral B_{12 …}

Optimizing Hydrogen Sulfide Removal And Biogas Production Using The Water Wash Method, Brian Leightner

Theses and Dissertations

Biogas forms from decomposing organic material in agricultural digesters, landfills, and wastewater treatment plant digesters. Biogas is mostly composed of methane, and can be used as a carbon-based fuel. Microorganisms that consume organics in these waste streams also produce hydrogen sulfide (H2S) as part of the biogas, in varying trace amounts. H2S is corrosive to engines and pipes for machinery, a human health hazard when inhaled, and an aquatic hazard when dissolved in water. Water washing is an absorption process that dissolves hydrogen sulfide and other water soluble compounds in this process and carries it away from the gas, thereby …

Towards Completely Automated Glycan Synthesis, Matteo Panza

Dissertations

Carbohydrates are ubiquitous both in nature as biologically active compounds and in medicine as pharmaceuticals. Although there has been continued interest in the synthesis of carbohydrates, chemical methods require specialized knowledge and hence remain cumbersome. The need for development of rapid, efficient and operationally simple procedures has come to the fore. This dissertation focuses on the development of a fully automated platform that will enable both experts and non-specialists to perform the synthesis of glycans. Existing automated methods for the synthesis of oligosaccharides are highly sophisticated, operationally complex, and require significant user know-how. By contrast, high performance liquid chromatography (HPLC) …

Novel Silica Filled Deep Eutectic Solvent Based Nanofluids For Energy Transportation, Changhui Liu, Hui Fang, Xinjian Liu, Ben Xu, Zhonghao Rao

Chemistry Faculty Publications and Presentations

Liquid range of nanofluids is a crucial parameter as it intensively determines their application temperature scope. Meanwhile, improved thermal conductivity and stability are of great significances and comprise the main fundamental research topics of nanofluids. In this work, 2- butoxy-3,4-dihydropyran (DP), produced from a convenient one-pot three-component reaction in water, was employed as dual lipophilic brusher and metal nanoparticle anchor. It was found that DP was able to enhance the dispersing ability and thermal conductivity of SiO2 nanoparticle filled deep eutectic solvent (DES) based nanofluids simultaneously. The key to the success of this protocol mainly relies on the electrophilic property …

The Effects Of Temperature On The Yields Of Aliphatic And Aromatic Products From The Supercritical Pyrolysis Of 1-Octene, Elizabeth Anne Hurst

LSU Doctoral Dissertations

Prior to their combustion, fuels for future high-speed aircraft are expected to experience supercritical conditions, leading to the production of polycyclic aromatic hydrocarbons (PAH), precursors to solid carbonaceous deposits, via pyrolytic reactions. These solid deposits can clog fuel-transfer lines, causing unsafe aircraft operation. To prevent the formation of fuel-line deposits, it is critical to understand the reaction pathways that lead to PAH formation in the supercritical fuel pyrolysis environment.

To better understand the role of large 1-alkenes in PAH formation, supercritical pyrolysis experiments with model fuel 1-octene, a representative 1-alkene product from supercritical n-alkane pyrolysis, have been performed. The …

Sustainable Solutions, Fall/Winter 2020, Issue 41

Sustain Magazine

No abstract provided.

Performance Of Concrete Made With A Calcined Clay – Limestone-Portland Cement Exposed To Natural Conditions, Fernando Martirena, Ernesto Díaz, Dayran Rocha, Hamed Maraghechi, Karen Louise Scrivener

International Conference on Durability of Concrete Structures

This work presents the results of an investigation carried out to assess durability of concrete made with a calcined clay- limestone-Portland cement with 47% of clinker, hereafter named LC3, produced during an industrial trial in 2013. LC3 was used to cast concrete blocks and later expose them at a natural location at the northern coast of Cuba. Reference concrete was cast with Cuban Portland cement having 88% of clinker. Throughout three years (2015, 2016, 2017) concrete cores were systematically taken and the specimens were subjected to a testing program that included Formation factor, chloride profiling, surface resistivity, air permeability and …

Chemical Process Development, University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Fact sheet on the Energy & Environmental Research Center’s (EERC’s) chemical process development capabilities, facilities and equipment, and history.