Engineering Commons^™

Mechanical Connection For Concrete Structures, George Morcous, Raed Tawadrous

Durham School of Architectural Engineering and Construction: Faculty Publications

A system and method for connecting precast concrete structures includes anchoring a sleeve within a pocket formed in one of the concrete structures , and placing the concrete structures in contact with one another such that the pocket is diposed around a protruding end of a shear connector embedded in the other concrete structure . A bridge is inserted around the protruding end of the shear connector and a fastener is installed onto the protruding end of the shear connector to engage the bridge and urge the bridge in abutting relation with a lip of the sleeve . The pocket …

Numerical And Semi-Analytical Estimation Of Convective Heat Transfer Coefficient For Buildings In An Urban-Like Setting, Anwar Demsis Awol

Electronic Thesis and Dissertation Repository

Urban building arrangements such as packing density, orientation and size are known to influence the microclimate surrounding each building. Studies on the impact of urban microclimatic changes on convective heat transfer coefficient (CHTC) from a stock of buildings, however, have been rare in surveyed literature. The present study focuses on numerical and analytical investigation of CHTC from building-like models with homogeneous set of equal and unequal planar and frontal densities. Consequently, the study discusses the CHTC response in relation to broader changes in the urban surface form. Part of the process involves the development of a simplified one-dimensional semi-analytical CHTC …

Forensic Investigation Of Building Failure – The Harbour Cay Condominium Disaster, John Airis

Publications and Research

When a building suffers collapse, the U.S. Occupational Safety and Health Administration (OSHA) is tasked with conducting an investigation into the cause. Often OSHA will request technical assistance from the National Institute for Standards and Technology to assist in the forensic technical aspects determining a most probable cause. This forensic effort entails many actions. The Harbour Cay Condominium disaster occurred on March 28, 1981 in Cocoa Beach, Florida. It was a total collapse of a five story reinforced concrete structure during the last stage of roof construction, resulting in 11 deaths and 24 injuries. The investigation report revealed structural design …

The Bridge Newsletter Winter 2019, Missouri University Of Science And Technology

The Bridge Newsletter

-Dehghani joins S&T
-Life after death of solar panels
-Civil engineering senior studies in Hong Kong
-Planning for future climate changes in the Artic

Interdisciplinary Studio Pavilion [Isp] 2019, Alex Beaubien

Construction Management

The Interdisciplinary Studio Pavilion 2019 was designed for students within architecture, architectural engineering, and construction management to be placed into eight interdisciplinary teams and design a pavilion that reflected the narrative for the Wine History Project of San Luis Obispo (the “WHP). Its curricula emphasized aesthetics; fabrication methods and techniques; ease of assembly, reassembly and transportability; and function. Deliverables for each team's structure focused on these curricula that required numerous design refinements and construction feasibility studies. This required each team member to contribute their respective knowledge about architecture, structural engineering, and construction to create a pavilion that fulfilled WHP’s goals. …

Interdisciplinary Studio Pavilion [Isp] 2019, Albert J. Gutierrez

Construction Management

Historically Cal Poly’s motto has been ‘Learn by Doing’ and the College of Architecture and Environmental Design (CAED) is one of the leading examples of this. Many students gain valuable hands-on and real-world experience through collaborative projects and assignments. Through this learn by doing philosophy and collaborative learning approach Cal Poly construction management, architecture and architectural engineering students worked together in 8 separate studio teams to design and construct a portable pavilion for the Wine History Project of San Luis Obispo County. Acting as a client they requested that we design a portable pavilion space that will be used to …

Kc 4.3: Rural Landscapes Of The 20th Century, Stefania Landi, Concetta Lenza, Denise Ulivieri

ISCCL Scientific Symposia and Annual General Meetings // Symposiums scientifiques et assemblées générales annuelles de l'ISCCL // Simposios científicos yy las Asambleas Generales Anuales

During the 20^th Century, rural landscapes all over the world underwent rapid transformations as a result of many factors - including new socio-political and economic conditions, new agricultural practices and the mechanization of agriculture - resulting in radical transformations of land uses and in the introduction of new infrastructures and facilities, necessary for the storage and distribution of an ever increasing amount of products. Based on the existing documents and bibliography relevant to the topic (ICOMOS-IFLA, Principles concerning rural landscapes as heritage, 2017; ICOMOS-ISC20C, Madrid-New Delhi Document. Approaches to the conservation of twentieth-century cultural heritage, 2017; Meeus, Wijermans, Vroom, …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Centres Of Excellence And Roadmaps For Digital Transition: Lessons For Ireland’S Construction Industry, Barry Mcauley, Alan Hore, Roger West

Conference papers

Like most sectors in today’s working world, construction businesses are challenged to work in an increasingly digitised world with sophisticated demands from intelligent clients. So much has been written about the inefficiencies of the construction industry, its fragmentation, lack of collaboration, low margins, adversarial pricing, poor productivity, financial fragility, lack of research and development, poor industry image and relatively weak use of digital solutions. The Irish government recognises the importance of digital innovation to address many of the challenges the construction industry faces. With recent high profile reports of escalating spend on signature public sector projects and weak productivity performance …

Bim In Ireland 2019: A Study Of Bim Maturity And Diffusion In Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

In 2017, the BIM Innovation Capability Programme team applied five macro BIM maturity conceptual models to capture the capability of the Irish construction industry and assess its BIM maturity. The results found that while Ireland is mature for modelling processes, it is less developed with regards to collaboration processes and policies. Ireland also ranked poorly when it came to regulatory frameworks, measurements and benchmarks compared to a number of countries which also applied the same conceptual models. At the time, the findings highlighted that Ireland’s diffusion dynamic was middle out, meaning that larger organisations or industry associations were pushing the …

An Investigation Into Current Procurement Strategies That Promote Collaboration Through Early Contractor Involvement With Regards To Their Suitability For Irish Public Work Projects, Barry Mcauley, Frederic Lefebvre

Conference papers

Previous research has established that multi-disciplinary collaboration will benefit a construction project throughout its lifecycle. While Lean Construction, Building Information Modelling (BIM), and Integrated Project Delivery (IPD) can all be viewed as separate processes which add independent value to a project, they are more effective when used in partnership with each other. In order to ensure the high levels of collaboration expected for these processes to work in unison, the early involvement of the Contractor is paramount. Early contractor involvement within the design process can ensure a more focused integrated project team, improvement of both constructability and cost certainty, as …

From Roadmap To Implementation: Lessons For Ireland’S Digital Construction Programme, Barry Mcauley, Alan Hore, Roger West

Conference papers

As part of their Future of Construction initiative in 2018 the World Economic Forum published an action plan to accelerate Building Information Modelling adoption. The WEF report highlighted actions that companies, industry organisations and governments are advised to implement to accelerate BIM adoption and better capitalise on delivering better project outcomes. According the authors of the report BIM is seen as the centrepiece of the construction industry’s digital transformation, however they acknowledged that BIM adoption globally remain slow. Anecdotal experience would suggest that BIM usage in Ireland is also very low and that a similar initiative or an adaptation of …

Quantification Of Heat Flows Through Building Entrance Doors On A Winter Day, Daeho Kang

Publications and Research

The current methods for the prediction of the heat flow through building entrance doors have been used for years while involved with a certain degree of uncertainty. This paper describes an experimental method that accurately quantified such heat flow. The experiment monitored local environmental parameters in a college building on a cold winter day. The results of the experiment demonstrated that the experimental method is viable to accurately estimate the heat flow throughout the entrance doors and the presence of a vestibule moderated heat losses from the conditioned area. The results will be used for validating the existing methods.

Competence Of A Spray Passive Down-Draft Evaporative Cooling (Pdec) System For Space Cooling, Daeho Kang, Richard K. Strand

Publications and Research

A spray PDEC system has been relatively less considered than other passive cooling strategies as one of the viable low-energy solutions in the cooling of buildings while having a great potential in energy savings. This study is intended to evaluate the capability of a spray PDEC system for space cooling. It comprises four simulation scenarios to see the system response and influence of indoor thermal environment when a spray PDEC system is adopted as a primary cooling system in two different climates. The simulation results show that a spray PDEC system causes a substantial variation in the indoor thermal environment …

Prototyping Elliptically Profiled Inverted Pendulum Walls In Cross-Laminated Timber (Clt) For Passive Self-Centering And Seismic Resiliency, Marco Lo Ricco

Theses and Dissertations

Cross-laminated timber (CLT) buildings garnered international attention, nearly a decade ago, for elevating wood construction to new heights on fully panelized assemblies of floors and walls. While highly regarded as a sustainable building material, use of CLT as a structural wall system depends on seismically resilient strategies like controlled rocking. This project prototyped elliptically profiled CLT panels and slotted-pin steel connections, at full-scale, to produce rolling and slip-friction inverted pendulum wall systems of one-story height and inspired by seismic isolation concepts. Digital fabrication realized elliptical profiles along the load-bearing edges of six 5-ply CLT panels and various customized slot shapes …

Daylight Illuminance In Classrooms Adjacent To Covered And Uncovered Courtyards Under The Clear Sky Of Najran City, Saudi Arabia, Abdultawab M. Qahtan

Emirates Journal for Engineering Research

Daylight penetrating the classrooms makes students efficient, improves overall health and increases energy efficiency. In the hot regions, the concept of courtyards in buildings is deeply linked to the architecture as a sustainable solution to daylight indoors without negatively affecting the building cooling loads in the summer. Najran University has existing courtyards in college buildings. Recently, the university covered the courtyards using PVC canvas. This study aims to investigate and compare the daylight illuminance in classrooms adjacent to covered and uncovered courtyards. A case study of four classrooms in the College of Engineering was investigated under the clear sky of …

Northeastern Species In Hybrid Cross Laminated Timber, Hamid Kaboli

Doctoral Dissertations

Known in the building industry throughout the world, Cross Laminated Timber (CLT) is a massive timber building material with outstanding structural, fire, and seismic properties. CLT is a cost-competitive, sustainable construction material is a good candidate as a substitute material for concrete, masonry, and steel, in mid-rise and high-rise buildings. CLT is perpendicular layers of dimensional lumbers usually laminated together and forming a massive structural panel. This dissertation explores the viability of utilizing Massachusetts grown Eastern Hemlock and Eastern White Pine in CLT panels as pure or in conjunction with other high-value wood products. 59% of Massachusetts’ lands are covered …

Developing A Workflow To Integrate Tree Inventory Data Into Urban Energy Models, Farzad Hashemi, Breanna L. Marmur, Ulrike Passe, Janette R. Thompson

Farzad Hashemi

Building energy simulation is of considerable interest and benefit for architects, engineers, and urban planners. Only recently has it become possible to develop integrated energy models for clusters of buildings in urban areas. Simulating energy consumption of the built environment on a relatively large scale (e.g., such as a neighborhood) will be necessary to obtain more reliable results, since building energy parameters are influenced by characteristics of the nearby environment. Therefore, the construction of a 3-D model of urban built areas with detail of the near-building environment should enhance simulation approaches and provide more accurate results. This paper describes the …

Workforce Development Through Online Experiential Learning For Stem Education, Arefeh Mohammadi, Kevin Grosskopf, John Killingsworth

Durham School of Architectural Engineering and Construction: Faculty Publications

The U.S. workforce is increasingly comprised of older adults, women, and minorities who lack basic skills and are unable to acquire these skills through traditional educational and training programs. New approaches are needed to provide effective training to the adult learner and flexible support for nontraditional students who must balance work-life demands with limited educational opportunities. Contextualized teaching and learning (CTL) is a form of experiential learning that blends both basic skills and occupational training together in environments that allow students to relate subject matter to real-world situations. Virtual CTL environments can be created to better engage students, provide immediate …

Development Of A Framework To Support The Effective Adoption Of Bim In The Public Sector: Lessons For Ireland, Shiyao Kuang, Alan Hore, Barry Mcauley, Roger West

Conference papers

Building Information Modelling (BIM) has been formally adopted by many countries with the promise of creating greater economic, social and sustainability benefits. Several authors and institutions have presented alternative BIM policies and tactics which have been adopted by developed countries. However, there is evidence to indicate that BIM adoption theories are not well established and, in particular, the linkage between BIM public sector adoption strategy outcomes and their contribution to achieving Government policy objectives are underdeveloped. This paper will present the outcome of the first phase of a systematic literature review of published studies (including journal papers and noteworthy international …

Analysis Of The System Response Of A Spray Passive Downdraft Evaporative Cooling System, Daeho Kang, Richard K. Strand

Publications and Research

A spray Passive Downdraft Evaporative Cooling (PDEC) system achieves great savings for space cooling and improves indoor environmental quality by supplying a large amount of fresh outdoor air. As previous studies heavily focused on the energy saving capability of a spray PDEC system due to lack of methods for a detailed analysis, the influence of cool humid supply air from a spray PDEC system in a space in buildings has not been comprehensively studied. This study is intended to evaluate the competence of a spray PDEC system as a primary cooling system in typical spaces in a primary school building …

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing water in a grout mix, …

Reduce, Reuse, Reengineer, Neil Ryan Robertson, Anthony James Beers

Architectural Engineering

Our senior project is a research exploration of renewable energy. We recognized there is a major need in the world for the advancement of green power sources. For our project, we wanted to go beyond what we have learned in our Cal Poly architectural engineering classes and to use some of our own creativity to investigate the possibilities of renewable energy from a structural perspective. The guiding question we asked ourselves was, “as architectural engineering students, how could we shift our world to use more renewable energy?” To start our journey off, was the original inspiration from the work of …

Pedestrian Bridge In Tanzania, Maja Sagaser, Karina Rosales

Architectural Engineering

This senior project originated to address the need of the community of Same, Tanzania. There is a deep and wide ravine which floods, making the path many adults and children take to the Majevu Primary School increasingly difficult and dangerous. This report encapsulates all of the steps taken to complete an approved final design for a footbridge to be constructed over this ravine. It includes the project overview, the architectural and structural design process, as well as the important considerations. There are also structural drawings that include plans, elevations, and details.

Steel Test Set-Up For Non-Ductile Concrete Shear Walls, Colin S. Ridgley

Architectural Engineering

The purpose of this project was to provide a robust test set-up for the thesis work being conducted by graduate students, Jerry Luong & Rory de Sevilla. Their research aims to evaluate the feasibility of using fiber-reinforced polymer wraps and splay anchors to retrofit non-ductile concrete shear walls through a series of tests on reinforced concrete walls.

Four key constraints governed the design of the test set-up. First, the wall can be cyclically, laterally loaded to develop data for comparison with theoretical analysis methods. Second, the wall can be axially loaded to simulate interaction effects and prevent a sliding failure …

Automated Generation Of Daily Evacuation Paths In 4d Bim, Kyungki Kim, Yong-Cheol Lee

Durham School of Architectural Engineering and Construction: Faculty Publications

Spatial movements of workers and equipment should be carefully planned according to project plans. In particular, it is crucial for workers’ safety to prepare emergency evacuation paths according to changing construction site configurations and construction progress. However, creating evacuation paths for all crews for each day can be an extremely labor-intensive task if it is done manually. Consequently, in most construction projects, evacuation plans are not provided to managers and crews throughout the entire construction. Even state-of-the-art technologies do not suggest ways to generate evacuation paths according to changing progresses presented in 4-Dimensional Building Information Model (4D BIM). This research …

The Impact Of Trees On Passive Survivability During Extreme Heat Events In Warm And Humid Regions, Ulrike Passe, Janette R. Thompson, Baskar Ganapathysubramanian, Boshun Gao, Breanna L. Marmur

Breanna L. Marmur

Communities are increasingly affected by excessive heat. The likelihood of extreme heat events is predicted to increase in the Midwest region of the United States. By mid-century (2036–2065), one year out of 10 is projected to have a 5-day period that is 13°F warmer than a comparable earlier period (1976–2005). The frequency of high humidity/dew point days (“extra moist tropical air mass days,” MT++ synoptic climate classification system) has also increased significantly during a similar period (1975–2010) and between 2010 and 2014 included 8 of 26 heat events. This impact is exacerbated by the fact that many residences in low-income …

The Timber Buckling Restrained Brace Frame, Jessica Resta

Architectural Engineering

With the increasing awareness on the topic of earthquake resistance, efficient, cost-effective, and environmentally friendly solutions in the structural field are on the rise. The purpose of this report is to investigate the Timber Buckling Restrained Brace (TBRB), a new lateral-resisting element made of steel and lumber, applicable in residential and small commercial units. In addition to the TBRBs’ materials being readily available, the braces are easy to manufacture, reducing overall costs of production and transportation. The brace, made partly of wood, has also a low environmental impact when compared to other lateral force resisting elements like concrete shearwalls or …

Aei Student Design Competition: Value Engineering & Design Build, Vincenzo Paolo Guidi

Construction Management

The Architectural Engineering Institute puts on a yearly student design competition that features interdisciplinary teams from colleges across the country. The project for the competition was the Jack H. Miller Center for Musical and Performing Arts on the Hope College campus in Holland Michigan. The main challenges in the problem statement address acoustics, using mass timber, and add alternative roof top space. Through a collaborative process, our team created a proposal that addressed the challenges and why we were the best fit for the job. I worked with a fellow construction management student, Shannon Wheeler, to produce our portion of …

Building Homes And Hopes In Bangalore, India, Sherry S. Saroufeem

Construction Management

Habitat for Humanity Global Village is an organization that continuously sends volunteers to work on construction projects around the world. My team and I were chosen to go to a village in Bangalore, India, where we dug and poured home foundations for three families in need. Given the opportunity to combine my love for construction and my passion for helping those in need, I was certain that this was the senior project for me. I wanted the capstone of my college educational experience to reflect a hands-on approach, where I had the opportunity to make a difference and see an …