Engineering Commons^™

A Generative Statistical Approach For Data Classification In A Biologically Inspired Design Tool, Marvin Manuel Arroyo Rujano

Graduate Theses and Dissertations

The objective of the research this thesis describes is to find a way to classify text-based descriptions of biological adaption to support Biologically Inspired design. Biologically inspired design is a fairly new field with ongoing research. There are different tools to assist designers and biologists in bio-inspired design. Some of the most common are BioTRIZ and AskNature. In recent years, more tools have been proposed to aid and make research in the field easier, for example, the Biologically Inspired Adaptive System Design (BIASD) tool. This tool was designed with the goal of helping designers in early design stages generate more …

Flight Vehicle Design, Andrew Ning

Books

No abstract provided.

Audio To Architecture: House Music As A Form Generator, Polina Timchenko

Architecture Undergraduate Honors Theses

Contemporary music undergoes similar process of creation to that of the design process through computation and variation. House music as a representation of contemporary culture has a layered structure that allows specific characteristics to identify it as house music. Song components can vary and mix in different orders that form new dynamic compositions. I am going to explore the idea that every house music component can be translated into geometry with the use of parametric design techniques.

Origami-Based Design Of Fold States And Stability, Alex Avila

Theses and Dissertations

Origami is a potentially elegant and powerful source of inspiration for many engineering designs. The viable shapes (fold states) of a single device allow it to perform multiple, seemingly contradictory, functions. The fold state is a large factor in the device's performance, but there are challenges in selecting and maintaining those fold states. In this thesis we analyze existing concepts for overcoming these challenges. Those concepts are compared with those that occur in origami-based devices. From this analysis fundamental gaps were identified, specifically, shortcoming in the terminology used to refer to (1) non-flat origami states and (2) sets of facets …

Minutes & Seconds: The Scientists, Patrick Aievoli

Zea E-Books Collection

Minutes & Seconds, is a captivating intelligible read for those who strive to understand where the “what if” moment has gone. Succeeding his other captivating books, Aievoli’s deep introspective lens dials his readers in to awaken the proverbial sleeping giant inside of our consciousness. He designs an insightful exciting romp through the surreal landscape of our society and illustrates how various pioneers have lead us to a crossroads. I’m truly impressed with Aievoli’s perspicacious comprehension of where digital has taken us through the hands of these select individuals. --Sequoyah Wharton

In creating Minutes & Seconds, Aievoli has assembled an interesting …

Design Of Wind Turbine Tower Height And Blade Length: An Optimization Approach, Ryan Wass

Mechanical Engineering Undergraduate Honors Theses

The wind industry is a fast growing market and is quickly becoming competitive with traditional non-renewable energy resources. As with any developing industry, research must continually be redefined as more complex understandings of design variables are learned. Optimization studies are common ways to quickly refine design variable selections. Historical wind turbine data shows that the tower hub height to rotor diameter ratio scales almost linearly. However there is no specific rule that dictates the optimum hub height for a given diameter. This study addresses this question by using an Excel based optimization program to determine the height to diameter ratio …

Evaluation Of Site Variability And Its Application In Design, Abu Hakim Muhammad Hasan Faisal

LSU Master's Theses

Geotechnical characterization has an important role in engineering geology as well as in implementation of any project. There are several variables and uncertainties involved in characterizing a project site. Four different sources of uncertainties represent the characterization of geotechnical variability, which include spatial variability, measurement error, statistical error and model bias. Spatial variability is expressed in terms of the mean, variance, and scale of fluctuation. Several statistical techniques such as the Gauge R & R, which includes X-Bar/R and ANOVA, and the Second Moment can be applied to compute site variability in terms of the coefficient of variations. Measurement error …

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Composite I-beams are popular for high-strength low-weight applications. Learning the macro-mechanics and designing the composite I-beam properly are necessary. In this report, a design overview of the composite I-beam is discussed which is based on classical lamination theory where it includes the homogenization approach, the plane stress assumption and the Kirchhoff hypothesis. Using these assumptions, a method was developed to come up with the effective material properties of a beam. Formulas to calculate maximum deflection and maximum bending stress and shear stress and the stress concentration at the connection of web-flange are discussed which describe ways for designing and manufacturing …

Development Of Iowa Dot Combination Bridge Separation Barrier With Bicycle Railing, Chaz M. Ginger

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

The Iowa Department of Transportation typically builds separation barriers between vehicle and pedestrian/bicycle facilities when sidewalks or trails are present on vehicular bridges. Currently, Iowa DOT employs a combination bridge rail that utilizes a concrete parapet that previously had been successfully evaluated to National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 4 (TL-4) criteria for these situations. While the parapet had been successfully evaluated, the combination bridge rail system as a whole had not been evaluated to any crash test standards. Iowa DOT desired that researchers at Midwest Roadside Safety Facility (MwRSF) design and test a combination bridge …

The Extraordinary Design Of The Bombardier Beetle: A Classic Example Of Biomimetics, Andy C. Mcintosh, Joseph Lawrence

Proceedings of the International Conference on Creationism

The innocuous looking bombardier beetle is one of the most remarkable creatures in the insect world. This tiny insect (1-1.5 cms long) is able to fight off any spider, frog, ant or bird that comes too close, by blasting the attacker with a powerful jet of hot, toxic fluid. Furthermore, the beetle can aim its weapon in any direction (even over its head) with pinpoint accuracy, and can reach distances of up to 20 cm with its spray. The bombardier beetle is rare in Europe but common in Africa, Asia and the warmer parts of the Americas, and in order …

The Investigation Of Silica Removal In Reverse Osmosis Concentrate By Changing Design Parameters, John M. Stomp Iv

Civil Engineering ETDs

Silica at high concentrations can precipitate and polymerize, forming scales on heat exchangers, boilers and turbines in industrial equipment, and on the feed side of the semi-permeable membranes in Reverse Osmosis (RO). Silica scale can cause decreased efficiency, increased treatment costs and, in some cases, irreversible damage. The removal of silica scale is challenging because it requires the handling of dangerous and hazardous chemicals. Therefore, much research has gone into the removal of soluble silica. The purpose of this research was to compare the overall effectiveness of silica removal in RO concentrate water with freshly precipitated Mg(OH)₂ and Fe(OH) …

Design For Maintainability In Developing Communities—A Case Study On The Uros Islands, Thomas Barlow

Undergraduate Honors Theses

Designing products for developing communities has exposed many of the underlying assumptions that engineers from developed nations have during the design process. There has been much written about these underlying assumptions in order to create a better framework for designing for developing communities. One unexplored, yet important area is the universality of common maintainability principles used in developed countries when designing products used in developing communities. Such principles include: simplicity, diagnosability, standardization of parts, modular subassemblies, minimizing assembly and disassembly parts, labeling components, increased life of moving parts, manuals, and simplifying tools needed for repairs [1]–[3]. The purpose of this …

Design And Performance Estimation Of A Low-Reynolds Number Unmanned Aircraft System, Sean Lauderdale King

LSU Master's Theses

The purpose of this thesis is to conceptually design a fixed-wing unmanned aircraft systems (UAS) with a higher flight-time and top stable speed than comparable systems. The vehicle adheres to specifications derived from the client, the market, and the Federal Aviation Administration (FAA). To broadly meet these requirements, the vehicle must fly for a minimum of three hours, return to the original flight path quickly if perturbed, and must be hand-launched. The vehicle designed must also have a large potential center of gravity movement to allow for customization of the planform and client customization.

An iterative design process was used …

Sloped And Mitered Concrete Headwalls, Kean H. Ashurst Jr., Brad W. Rister, Eileen Grady, Jason K. Ward

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) currently uses several pipe culvert end treatments, including standard headwalls, slope and flared headwalls, sloped and parallel headwalls, and safety metal ends. These treatments, however, can pose a safety hazard to motorists and those performing landscaping work (e.g., mowing). Crash statistics from 2012 through 2016 for Kentucky reveal that 49 fatalities and 148 incapacitating injuries occurred in incidents where culverts/headwalls were coded as the first harmful event on the police report. One solution to the safety hazards associated with standard pipe culvert headwalls is to use sloped and mitered concrete headwalls instead. To evaluate the …

Facilities Redesign Of Stockroom At Elcon Precision, David M. Brawner, Tyler O. Mastromattei, Jay Y. Matsumoto

Industrial and Manufacturing Engineering

Elcon Precision is a company based out of San Jose, California specializing in the photochemical processing of materials and brazing of metals and ceramics for a variety of different industries. Three students from the Industrial Engineering Department at California Polytechnic State University, San Luis Obispo were contacted by Elcon Precision to help redesign their stockroom and inventory areas in their San Jose location in order to allow for the future growth of the company. Elcon asked the Cal Poly project team to help increase efficiencies throughout the stockroom by creating an alternative layout that best suited the company's needs. This …

The Design Of A Digital Scheduling Solution For Healing Alternatives, Hailey A. Malin, Krista L. Mcallester, Anne E. Shields

Industrial and Manufacturing Engineering

The focus of this senior project is to assist Healing Alternatives, an acupuncture clinic located in San Luis Obispo, in developing a business management software to fit their needs and boost their overall organization. The approach to finding the right fit for this business included assessing their current system while simultaneously investigating other providers. Once alternatives were found that met all of Healing Alternatives’ initial requirements, trial demos were generated in order to perform user experience testing. The presented final solution, a scheduling software called Acuity Scheduling, was implemented in a three-phase move plan that occurred over the period of …

Circuit Breaker Module, Garvin Yee, Yei Trinh

Electrical Engineering

The circuit breaker module for this design project is a proof of concept that demonstrates the functionality, feasibility, and attainability of a consumer grade power systems analysis device suitable for college laboratory use. The goal of this project was to create the final iteration of a module that has been developed and refined over the course of previous years. The Cal Poly Electrical Engineering Department intends to use this design to produce circuit breaker modules intended for fault analysis. With the current changes made to the previous modules, the current circuit breaker is lighter, safer, and more universally reproducible. The …

Design Of A Robotic Cownose Ray, Mark Marzotto

Honors Theses

Nature often inspires advances in science and technology and a promising example of this is mimicking locomotion of underwater animals. The main ways in which manmade aquatic vehicles propel themselves are water jets and propellers, which are inconsistent with how underwater animals swim. The cownose ray displays very efficient thrust with low frequency strokes by using a combination of oscillations and undulations with its pectoral fins. The goal of this paper is to mechanically replicate the actual fin motion of the cownose ray in order to capture these attractive features. The design will account for both the oscillations by designing …

Corner Sealants For Tactical Shelters, Janine Carlita Nowak

Honors Theses

The demand for a lightweight, easy-assembly tactical shelter is high for those faced with unexpected disasters and global conflicts. This project focuses on designing and prototyping the corner sealant for such a shelter. Two materials were chosen and tested: an in-house thermoplastic polyurethane (TPU) and Texin 950. Thermogravimetric Analysis (TGA) was performed on both of these materials. The in-house TPU showed initial degradation at 282.50 °C and sample degradation at 457.45 °C. Similarly, Texin 950 showed initial degradation at 293.68 °C and sample degradation at 453.26 °C. Differential Scanning Calorimetry (DSC) was then run. The crystallization temperature (Tc) was observed …

Rickshaw For Common Ground, Marcus Dallin Cronin

Undergraduate Honors Capstone Projects

For this project my team and I were asked to design and manufacture a rickshaw, a device which will enable disabled individuals to experience outdoor hiking trails, for a non-profit organization based in Logan, Utah called Common Ground. Common Ground specializes in helping people with disabilities experience the outdoors in ways that would otherwise be impossible. The rickshaw will help Common Ground achieve its goals by providing them with a way to transport people with disabilities on moderately difficult hiking trails (i.e. Wind Caves Trail in Logan Canyon). In the past, Common Ground had use of a rickshaw that had …

Resiliency Vs Reality, Ainsley E. Henderson

Construction Management

This study analyzes the resilient design and construction features desired by Great Northern Services (GNS) for the design and construction of a new housing division in the City of Weed, California. This was compared to what the Cal Poly interdisciplinary student design teams were able to offer, by providing different design options. The study begins by showcasing the Boles fire and the connections that Cal Poly had made to support the City of Weed. The support was made through design and collaboration with Great Northern Services to create affordable housing. The study then discusses the needs that GNS wanted to …

The Setty Family Foundation 2018 Ashrae Applied Engineering Competition, Joshua Heath

Construction Management

The Setty Family Applied Engineering Challenge tasked my project group with designing a temporary shelter specifically for refugees in Eastern Europe to be used by governments, municipalities, and humanitarian agencies that is cost effective, portable, sustainable, and provides all necessary domestic needs. After months of research and design, we have developed the PolyShelter ; an eight-person structure erected to provide comfortability and safety to those in need. PolyShelter is designed to withstand the harshest of climates, provide exceptional insulation, and incorporate a rainwater collection system sufficient enough to support each unit. PolyShelter proves itself to be an economically viable solution …

Multipurpose Glider-Quadcopter Uas, Cody Delarosa, Lucas Richards, Ty Hilton

Senior Design Project For Engineers

The goal for this design was to develop a dual stage UAS that will deliver medical supplies to people in need in remote locations. To accomplish this, a quadcopter was designed to release a glider with the payload therein. A scaled down prototype was produced for analysis purposes. A conceptual model was fully designed that is capable of effectively taking off vertically, accelerating to a desired velocity, releasing the glider, and returning back to the initial takeoff location. The glider was designed to be fully controllable in order to accurately reach the desired location. System aerodynamics and quadcopter propulsion were …

Engineering Education Research, Michael C. Loui, Maura Borrego

School of Engineering Education Faculty Publications

This chapter describes several aspects of engineering education research with an emphasis on how they might relate to computing education research. We briefly summarize the history of engineering education as a scholarly field, and we describe the current structures that support engineering education research: academic departments, scholarly journals, annual conferences, and professional societies. We identify the theories that often inform engineering education research studies, including theories of cognition, motivation, and identity. We explain how quantitative, qualitative, and mixed methods have been used. We summarize the results of an illustrative selection of empirical studies across a broad range of topics, including …

Design And Probabilistic Analysis Of Mid- And High-Rise Wood Buildings Subjected To Earthquake Excitations, Shucheng Yang

Electronic Thesis and Dissertation Repository

Mass timber products, such as the glulam or cross laminated timber (CLT), are less frequently used construction materials at present for mid-rise and high-rise buildings. The feasibility and possible advantages of applying timber materials for constructing mid- and high-rise buildings are under investigation. One of the issues that needs to be addressed for the use of heavy timber materials is the safety of such constructions under seismic excitations. To address this issue, the nonlinear inelastic seismic responses and capacity curves of a wood buildings must be assessed. For this, the 10-, 15- and 20-storey buildings are designed using heavy timber …

Numerical Algorithm For Wing-Structure Design, Jeffrey D. Taylor, Douglas F. Hunsaker, James J. Joo

Mechanical and Aerospace Engineering Student Publications and Presentations

Low-fidelity aerostructural optimization routines have often focused on determining the optimal spanloads for a given wing configuration. Several analytical approaches have been developed that can predict optimal lift distributions on rectangular wings with a specific payload distribution. However, when applied to wings of arbitrary geometry and payload distribution, these approaches fail. Increasing the utility and accuracy of these analytical methods can result in important benefits during later design phases. In this paper, an iterative algorithm is developed that uses numerical integration to predict the distribution of structural weight required to support the bending moments on a wing with arbitrary geometry …

Low-Carbon Building Skills Website, Faculty Of Applied Science And Technology Sheridan College

Books and Websites

Low-carbon building involves designing, constructing, operating, maintaining, and removing buildings in ways that conserve natural resources and reduce Greenhouse Gas (GHG) emissions. To move towards a low-carbon economy, we need tradespeople who are educated in the design, construction maintenance and operation of buildings, who understand the industrial and constructions sectors, and are trained in low-carbon building skills.

Sheridan College’s participation in the Low Carbon Building Skills (LCBS) project involved developing and delivering low-carbon building skills curriculum across relevant disciplines and involving the full building cycle, from design to operations and optimization. The learning modules address what can be done to …

Rc Baja Car Suspension, Tyler Martin

All Undergraduate Projects

This year the Mechanical Engineering Technology Department at CWU is holding an R/C Baja car competition using the same rules as the ASME competition. The designed car must compete in three separate events: the slalom course, drag race, and obstacle course. By not only completing, but also being competitive in each of the events, the car will be deemed a success. Suspension and steering are two essential components of any R/C car, and was the main focus for this report. The suspension must be able to support the car in the event of impacts. In addition, the steering must be …

Senior Project Hauff Tree Pruner, Brian Woolery

All Undergraduate Projects

Neil Hauff, a business owner and entrepreneur from the Yakima valley challenged a team of engineering students from Central Washington University to design a motorized apple tree pruner. This report will discuss the engineering and construction that went into creating the housing of the tree pruner. The housing component needed to be able to protect the moving parts of the pruner, while withstanding the rotational torque produced by the Makita power drill used to drive the pruner. The biggest constraint in designing the housing was to keep the weight of the housing component under 1.5 lbs, while still keeping the …

Designing Novel Grooved Pallets For Industrial Application, Mirza Mohammed Abdullah Baig

ETD Archive

The purpose of this study was to model an improved pallet design which could overcome the drawbacks and failures of the pallets available in the market today. The new modeled pallets were designed to improve the capacity of the individual pallets and thereby increase the efficiency of the material handling process. The new modeled pallets were also designed with the aim to replace the racking system used for storage in the warehouse industry. The study was performed using two finite element analysis software, SOLIDWORKS and ANSYS, as analysis tools to study the behavior of the design under various real world …