Engineering Commons^™

Experimental And Numerical Study Of Dysphagia, Yash G. Potdar

Masters Theses

Dysphagia, meaning difficulty in swallowing, is a symptom of disease that occurs in young children and elderly people. It occurs particularly due to two reasons, weak neural network and/or deformities in oral section/s. The Helen DeVos Children’s Hospital’s Intensive Feeding Program takes care of children suffering from Dysphagia. In order to make the swallowing process easier and in some cases safer, thickener is added to the liquids. Depending on the requirement of thickness, the amount of thickener is varied. Although the directions to prepare the mixtures are given by the thickener product company, the required thickness is not achieved when …

Design And Realization Of A Nonlinear Vibration Energy Harvester For Cost Effective Additive Manufacturing, Rodrigo Barriuso De Juan

Masters Theses

Environmental energy harvesting has always been an attractive solution to the search for sustainable energy sources. Combined with the miniaturization and power consumption reduction of sensors and portable electronic devices, the possibility of powering using environmental energy, like vibration energy, instead of conventional batteries increases exponentially. Vibrational energy harvesting can be achieved using devices based on different physical phenomena. Electromagnetic based devices seem to be among the most effective when considering the power output levels within low frequency applications. However, these devices have always had inherent challenges including size and manufacturing cost reduction as well as limitations on the range …

Electrostatic Nanosmearing Architecture Of Additive Functional Groups During High Shear Mixing Of Pharmaceutical Blends, Sajan Kumar Chatarla

Masters Theses

The main objective of the research project is to detect and quantify the rate and extent of nanosmearing of hydrophobic functional groups of additives on multiple pharmaceutical particles during high shear mixing of formulations due to electrostatics affecting critical blend properties on the bulk scale. We accomplished this task by systematically detecting the electrostatics during powder flow and its consequence on the nanosmearing distribution of additives during mixing. In the first stage, the electrostatic behavior of particles was correlated to the powder flow. Secondly, its relative influence on nanosmearing of additives during mixing was determined by developing a methodology to …

Modeling, Optimizing And Testing Thermoelectric Generators For Liquid-To-Liquid Low Grade Waste Heat Recovery, Ali Eyddan Hamil

Masters Theses

The use of thermoelectric generators (TEGs) for producing electricity from low grade waste heat is thought to be a great solution in the future to reduce the power generation cost because of their advantages of reliability and environmental friendliness. Therefore, the current project aims to study thermoelectric generators for low grade waste heat recovery. In this work, a single unit cell of liquid to liquid thermoelectric generator attached with heat exchangers (heat sinks) is modeled using an internal flow. Its optimum design is obtained based on heat sink optimization and the optimal design method. An analytical model of four unit …

Improved Methodology For Developing Non-Motorized Safety Perfomance Functions, Keneth Morgan Kwayu

Masters Theses

This study aimed at improving the methodology for developing statewide non-motorized safety performance functions (SPFs). Due to lack of pedestrian and bicyclist counts, the methodology proposed a procedure for developing statewide surrogate non-motorized exposure measures using data that are available at statewide level. Eleven years non-motorized crashes at signalized urban intersections joining Arterial and Collector roads in Michigan were used to test the procedure.

The study also explored the use of Bayesian approach for modeling non-motorized crashes as an alternative to traditional classical count data models. Classical count data models that were considered as potential fit to the data include; …

An Equivalent Plate Model With Orthotropic Material Properties For Adjacent Box-Beam Bridge Superstructure, Timothy Alexander Schnell

Masters Theses

Reflective cracking over the longitudinal joints of adjacent box-beam bridges is a welldocumented and recurrent problem; it is a concern because it leads to poor durability performance. These cracks develop during early stages of bridge construction and have not been eliminate by the design revisions implemented so far.

This study is aimed at developing a rational load demand analysis model for calculating the moment acting at the longitudinal joints in order to determine the impact of post-tensioning on mitigating reflective cracking.

The scope of the study includes calculating moment demand at the shear keys using a rational analysis model based …

Experimental Characterization And Simulation Of Carbon Nanotube Strain Sensing Films, Nagendra Krishna Chaitanya Tummalapalli

Masters Theses

Carbon Nanotubes (CNTs) have excellent mechanical, electrical and electromechanical properties. These properties led to a lot of novel applications. Due to change in electrical properties under mechanical loading, these composites have potential applications in strain sensors, when these are fabricated as films. CNT-based films are commonly fabricated using different physical and chemical techniques based on the property requirements governing those applications. In this work, CNT films were prepared using wet chemical based methods and chemical vapor deposition techniques.

Plasma chemical vapor deposition using microwave power is used in the first method to deposit films on silicon substrates, using Nickel film …

Analytical Study Of Miniature Thermoelectric Device, Mohammed Dhannoon

Masters Theses

Miniature thermoelectric devices (TE) have been regarded as hopeful devices to attain efficient cooling in microprocessors and other small-scale devices. To recognize the performances of miniature thermoelectric coolers, a thermoelectric cooling module is theoretically analyzed. Particular attention is paid to the impact of the thermoelectric element length effect and the substrate material type influence on the cooling performance. The electrical contact resistance and thermal contact are taken into account.

Furthermore, miniature thermoelectric is compared with large thermoelectric, and effective material properties of miniature thermoelectric are studied. The obtained results also demonstrate power density (cooling/heating power per unit area of the …

Safety Benefit Analysis Of Alternative Delineation Practices In Michigan, Brenda C. Burdick

Masters Theses

Among the many aspects of roadway design, one important system is roadway delineation. The main purposes of roadway delineation include regulating, warning, and guiding drivers in a safe manner. Delineation systems have the potential to reduce crashes. This research sought to perform safety benefit analysis of roadway delineation practices in Michigan. Through literature review, several delineation practices, selection criteria, and previously developed crash modification factors were researched. Even though several pavement marking materials have been implemented in Michigan, a safety benefit analysis of various materials had not been performed. Sites were selected, and pavement marking material inventory data were combined …

Development Of Lignin Carbon Fiber And Reinforced Composites, Nathan Kieran Meek

Masters Theses

The aim of this work is to develop lignin carbon fiber for composite applications. This included mechanical testing of single lignin carbon fiber (LCF), interfacial shear strength determination for LCF-resin systems using single fiber fragmentation, x-ray diffraction for the evaluation of microstructural parameters, and finally composite manufacturing and testing. Through these focused areas of analysis, the carbon fiber is thoroughly characterized and composite performance is evaluated. This effort was a collaboration with the Center for Renewable Carbon (CRC) and the Civil and Environmental Engineering Department. LCF produced by the CRC resulted in fibers having tensile strength of 250-800 MPa and …

Preliminary Investigation For The Development Of Surrogate Debris From Nuclear Detonations In Marine-Urban Environments, Adam G. Seybert

Masters Theses

No nuclear weapon has ever been detonated in a United States city. However, this also means the nuclear forensic community has no actual debris from which to develop analytical methods for source attribution, making the development of surrogate nuclear debris a vital undertaking. Moreover, the development of marine-urban debris presents an unusual challenge because unlike soil and urban structures, which remain compositionally consistent, the elemental composition of harbor and port waters fluctuates considerably due to natural phenomenon and human activity. Additionally, marine vessel composition and cargo can vary dramatically. While early US nuclear tests were carried out in shallow-water coastal …

A Neural Network For Collaborative Forecasting, Abdulrahman M. Enani

Masters Theses

As the supply chain activities’ backbone, demand forecasting must be accurate. This paper proposes an artificial neural network forecasting model, which integrates and synchronizes shared information, such as sales or consumption rate among different partners, to improve the forecasting’s accuracy. This information sharing is part of the collaborative planning, forecasting and replenishment (CPFR) model, which is a supply chain model aiming to enhance the supply chain’s efficiency by jointly planning and forecasting between two or more supply chain partners that will be used as the base for production and replenishment activities. The model is validated using a tuna product sales …

A Bayesian Approach To Aerial Localization Of Radioactive Sources, Robert Blake Wilkerson

Masters Theses

Securing nuclear material has become an important area for the safety of the U.S. and other countries. Within nuclear security, there is a potential to use orphaned or stolen radioactive sources to cause harm. As the amount of radioisotopes used by government and commercial businesses increases, the need to secure these sources becomes exponentially more difficult. It is well known that there have been several cases of lost, orphaned or stolen nuclear sources across the globe. There is a need for state-of-the-art radiation search methods to search for these potentially dangerous radioactive sources that could be misplaced. While there are …

Synthesis And Characterization Of Porous Liquids, Yuanyou Gao

Masters Theses

Porous liquids consisting of modified hollow spheres which are fabricated by surface engineering with suitable corona and canopy species is one of interesting porous liquids reported recently. By taking advantage of the liquid-like polymeric matrices as a separation medium and the empty cavities as a gas transport pathway, porous liquids can function as promising candidates for postcombustion gas separation and thermal insulation purposes. Moreover, this synthetic strategy can be applied to other nanostructure-based porous liquids, facilitating production of porous liquids with specific request. In this thesis, a new member of this type of porous liquid with hollow spheres ranging from …

Yield Measurement System For Seed Corn: Improving Dynamic Weight Accuracy And Harvest Area Determination, Fatima Ellyn Murillo

Masters Theses

A prototype weight-based yield mapping system for seed corn production was developed at the University of Tennessee (UTK) and field tested in Iowa. The first chapter of the following study focuses on assessing the accuracy of this yield mapping system which employs a novel yield prediction and analysis software called Yield Analyzer. Yield Analyzer was designed using a rule-based system for producing yield maps with minimal user input by automatically determining acceptable ranges for known dependent variables that contribute to dynamic weight measurement errors.

The second chapter of this thesis covers the development of a non-intrusive, machine vision technique to …

Tracking Of Human Joints Using Twist And Exponential Map, Xiaodong Yang

Masters Theses

Motion tracking system in the home-based environment exhibits attractive advantages for stroke patients. Current methods suffer from incapability of accurately tracking movements with high degree of freedoms. Besides hardly meeting the predefined position during inertial sensor mounting also affects system's performance.

To tackle these challenges, a motion tracking system using twist and exponential map technology is developed in this paper. Firstly, a kinematic model for trunk and upper extremity is designed. Based on this model, twist and exponential map method which updates frames in their initial coordinates instead of transforming coordinates from one frame to another presents high efficiency and …

An Economic Evaluation Of A Biofuel Supply Chain Utilizing Multiple Feedstocks, Huaqi Zhang

Masters Theses

Biomass is considered as one potential feedstock for biofuel production. However, the high cost of biomass-to-biofuel supply chain, attributed to biomass’s low bulk density and resulting harvest, storage, and transportation challenges, has been a major hindrance to the success of biomass-based biofuel industry. In addition, the issue of dry matter losses during storage for a feedstock has affected biomass quantity and quality if the feedstock is stored for several months after a single harvest in a year. One potential way to improve the economics of biomass supply chain is to reduce storage need and enhance the utilization of harvest equipment …

Development Of An Analytical Model For Beams With Two Dimples In Opposing Directions, Mofareh H. Ghazwani

Masters Theses

Structures such as beams and steel plates can produce potentially high levels of unwanted vibrations and noises in the environment. A method of improving the vibration and acoustic characteristics of beams based on introducing dimples on its surfaces will be presented in this study. This method focuses on creating two dimples in the same and opposite direction on beam’s surface where the effect of dimples on the change in beam’s natural frequencies is the problems of interest.

A boundary value model (BVM) is developed for a beam with two dimples and subjected to various boundary conditions using Hamilton’s Variational Principle. …

Optimal Design Of Automotive Exhaust Thermoelectric Generator (Aeteg), Hassan Fagehi

Masters Theses

A consumption of energy continues to increase at an exponential rate, especially in terms of automotive spark ignitions vehicles. About 40% of the applied fuel into a vehicle is lost as waste exhaust to the environment. The desire for improved fuel efficiency by recovering the exhaust waste heat in automobiles has become an important subject. The thermoelectric generator (TEG) has the potential to convert exhaust waste heat into electricity as long as it is improving fuel economy. The remarkable amount of research being conducted on TEGs indicates that this technology will have a bright future in terms of power generation. …

Analytical Modeling And Numerical Simulation Of A Thermoelectric Generator Including Contact Resistances, Shripad Dhoopagunta

Masters Theses

With increasing demand for energy harvesting systems, research has been conducted in different areas in which Thermoelectric Generators (TEG) find their way into the top of many available resources. Out of many energy harvesting systems available, TEGs are comparatively easier to study, to manufacture and also to comprehend while producing enough energy for applications they find use in. They are solid state devices, meaning; they do not have any moving parts and hence makes them durable. Most of the energy that goes out of the automobile as exhaust is reused to power the TEGs. In most of the works that’s …

A General Code To Represent The Mathematical Life Cycle Cost Model Of Bridge, Bajel Mohammed Alshadeedi

Masters Theses

There are many factors that play a role in the overall cost of any bridge. The life cycle cost needs deep knowledge of bridge components to calculate its subcategories costs. The bridge life cycle cost is divided into; agency, user cost, and society costs. The agency cost includes the expected value of the final bridge construction cost, the inspection cost, better value of repainting cost, and replacing asphaltic deck cost. The user cost includes traffic delay cost and vehicle operation cost under different traffic conditions, accident cost, and failure cost. The society cost includes aesthetical and environmental impact. All costs …

Exploring The Influence Of Urban Watershed Characteristics And Antecedent Climate On In-Stream Pollutant Dynamics, Laurel Elizabeth Christian

Masters Theses

Understanding pollutant fate and transport in urban watersheds is a challenging endeavor, as heterogeneity of land use, precipitation patterns, and pollutant loadings add complexity to the system. As a result, many currently utilized water quality models exhibit poor performance. One main challenge in urban system modeling is the lack of quality data sets for model development, calibration, and testing, resulting in the need for high quality data collection. Although recent studies have begun to investigate pollutant transport in urban watersheds to aid these models, these studies have focused primarily on the end-of-pipe as the point of interest (i.e. prior to …

A Mixed Integer Linear Programming Approach For Developing Salary Administration Systems, Taner Cokyasar

Masters Theses

Determining salary increases of executive personnel is a challenging decision process for many companies. Salary administration policies that aid in the determination of salary increases and other compensation benefits have a wide variety of advantages for both a company and its employees. This thesis develops a mathematical programming approach to create a salary administration system that recognizes the importance of performance and potential of employees for future promotions as major components of a salary increase policy for executive personnel. A number of companies all over the world use salary administration systems that integrate work performance and potential for advancement to …

Measurement Of Activity And Stability Of Physical Vapor Deposition (Pvd) Coated Crystal Surfaces, Anuradha Krishnan

Masters Theses

The overall objective of this research work is to investigate the hydrophilic and hydrophobic forces acting on organic crystal planes and understanding the interaction of functional groups with additive molecular nanolayers. Crystals of acetaminophen and lactose were made and the surface forces were tested on Atomic Force Microscope (AFM). Uniformity of crystal surface was confirmed from the AFM study in the first stage. The growth factors of crystal planes as a function of time were studied. Adhesion forces on plain crystals were measured on both two different organic crystals made of acetaminophen and lactose. In the second stage, …

Optimization Methodology For Cvt Ratio Scheduling With Consideration Of Both Engine And Cvt Efficiency, Steven Beuerle

Masters Theses

A transmission ratio schedule is developed to optimize the fuel consumption for an automotive continuously variable transmission (CVT) connected to an internal combustion engine (ICE). Although the optimal operating line (OOL) generated from an engine brake specific fuel consumption (BSFC) map can be used to generate a CVT ratio schedule that yields maximum engine efficiency, it was found that OOL-based CVT ratio scheduling does not necessarily offer the best fuel economy because optimal CVT efficiency does not always correspond to OOL tracking. To develop a CVT ratio schedule that can offer the best fuel economy, a novel ratio-scheduling methodology is …

Analysis Of Transit Accessibility For People With Disabilities, Rostam Khalid Mohammed Ameen Qatra

Masters Theses

The inconvenience of public transit systems and unavailability of bus stops in the United States has resulted in a heavy reliance on the private automobile. One of the main issues in transit services is accessibility, particularly for people with disabilities. This research is intended to compare estimated job accessibility measures by transit in Kalamazoo county for workers with reduced physical mobility and without. Using OpenTripPlanner (OTP) software, General Transit Feed Specification (GTFS), Open Street Map (OSM) and Longitudinal Employer-Housing Dynamics (LODES) data were analyzed to estimate job accessibility for people with mobility constraints. By using the shortest tree path method, …

A Genetic Algorithm Incorporating Design Choice For The Preliminary Design Of Unmanned Aerial Vehicles, Kenneth Michael Mull

Masters Theses

Unmanned Aerial Vehicles (UAVs) are currently at the forefront of aerospace technologies. The design of these aircraft is complex and often performance characteristics are coupled to multiple design attributes. At the early design phase both discrete and continuous design choices are present limiting the feasibility of traditional derivative based optimization techniques. In place of these methods, the design space can be explored using a genetic algorithm that mimics the process of natural selection, providing a capable and reliable base airframe constructed from the required performance metrics. By incorporating a genetic multidisciplinary optimization algorithm early in the conceptual design phase, aircraft …

Development Of Fully Printed And Flexible Strain, Pressure And Electrochemical Sensors, Dinesh Maddipatla

Masters Theses

In recent years, considerable research has been put into the development of printed electronics (PE) as well as the best ways to effectively and efficiently print electronic devices on flexible substrates. This thesis focuses majorly on the design and fabrication of novel flexible sensors using conventional printing processes.

Initially, a flexible printed strain gauge was fabricated successfully on a flexible paper substrate using flexography printing process. Silver (Ag) ink was printed on the paper substrate as metallization layer. The performance of the printed device was investigated by subjecting the strain gauge to a 3-point bend test, with a displacement of …

Effects Of Ultrasonic Transducers On Heat Transfer In Packed Particle Beds, David Patrick Moseley

Masters Theses

The objective of this study was to determine the effects of ultrasonic transducers on heat transfer in a packed particle bed heat exchanger. Although substantial research has been devoted to ultrasound, and the associated improvements in heat transfer, data regarding the effects on packed particle beds is non-existent. This is of particular interest given the potential to improve heat transfer in a wide variety of packed particle bed systems. A 42.9% increase in the heat transfer rate was demonstrated as the result of improved fluid convection throughout the packed particle bed. Secondary effects, including acoustic cavitation, acoustic streaming and local …

Dji S-1000 Spreading Wings Octocopter: Determination Of Rotor Downwash Slipstream Size, Jonathan Lemieux

Masters Theses

The DJI S-1000 Spreading Wings octocopter rotor downwash slipstream area of influence was measured in axial climb conditions and in straight level flight. These data were gathered using a simple apparatus of distributed anemometers and a custom made boom affixed to the drone. Straight level flight tests incurred autopilot oscillations that rendered the data gathering and analysis challenging. The best quality data was acquired during the axial climb flight tests. The axial climbs were conducted in calm winds. It was determined that the axial climbs under these conditions displaced the rotor slipstream 9 ± 2.5 cm to the rear of …