Engineering Commons^™

Florida Rural Small Business Energy Assistance Collaborative Cumulative Report Ending December 31, 2016, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

The U.S. Department of Agriculture's (USDA) Rural Development initiative reaches out to communities across America with many programs (http://www.rd.usda.gov/programs-services/all-programs). USDA's Rural Energy for America Program (REAP) offers grants and loan guarantees for energy efficiency improvements and renewable energy systems to agriculture operations and qualifying rural small businesses. USDA has awarded the University of Central Florida a grant to provide a limited number of subsidized Energy Audits to eligible businesses in Florida in support of USDA Rural Development (USDA-RD) Grant and Loan programs for rural small businesses. The ultimate goal of the energy audits is to increase participation in REAP. Audits …

Phased Retrofits In Existing Homes In Florida Phase Ii: Shallow Plus Retrofits [Revised], Florida Solar Energy Center, Karen Sutherland

FSEC Energy Research Center®

The U.S. Department of Energy Building America team Partnership for Improved Residential Construction is collaborating with Florida Power & Light Company (FPL) to conduct a phased residential energy-efficiency retrofit program. This research seeks to determine the impacts on annual energy reductions from the installation of advanced residential technologies. Earlier project work involving the application of two levels of retrofit, shallow and deep, found average savings of 9% and 38%, respectively. Whole-house demand reduction among the deep retrofit homes averaged 39% during FPL's peak summer hour. These savings levels approach the Building America program goals of reducing whole-house energy use of …

Stability And Interfacial Viscoelasticity Of Oil-Water Nanoemulsions Stabilized By Soy 2 Lecithin And Tween 20 For The Encapsulation Of Bioactive Carvacrol, Jerome J. Nash, Kendra Erk

School of Materials Engineering Faculty Publications

The rheology of oil-in-water (O/W) droplet interfaces stabilized by food-grade emulsifiers (soy lecithin or Tween 20) under controlled aqueous conditions was investigated to elucidate its contribution in the kinetic stabilization of nanoemulsion-based delivery systems containing carvacrol, a naturally-derived antimicrobial compound. Dilational rheology of surfactant-laden O/W interfaces was measured using axisymmetric drop shape analysis. The kinetic stability of corresponding nanoemulsions (containing mixtures of carvacrol and medium-chain triglyceride (MCT) oil dispersed in water (pH 7)) was characterized using dynamic light scattering. Zwitterionic lecithin molecules adsorbed to the O/W interface for 24 h formed a notably viscoelastic layer, compared to nonionic Tween 20 …

Shear Driven Micro-Fluidic Pump, Nihad E. Daidzic

Aviation Department Publications

United States Patent, Patent Number US 9,528,503 B2, Date of Patent December 27, 2016.

An example includes an apparatus to pump a fluid. The apparatus includes a housing extending along a length defining an elongate interior, an actuator in the housing, conforming to the elongate interior, the actuator including a plurality of lumens, each having a length extending substantially parallel to the elongate interior, each from around 10 to 200 micrometers across and an actuator configured to oscillate the actuator in the actuator houslng along the length of the elongate interior with a rate differential between movement in a first …

Experimental And Numerical Study Of Dysphagia, Yash G. Potdar

Masters Theses

Dysphagia, meaning difficulty in swallowing, is a symptom of disease that occurs in young children and elderly people. It occurs particularly due to two reasons, weak neural network and/or deformities in oral section/s. The Helen DeVos Children’s Hospital’s Intensive Feeding Program takes care of children suffering from Dysphagia. In order to make the swallowing process easier and in some cases safer, thickener is added to the liquids. Depending on the requirement of thickness, the amount of thickener is varied. Although the directions to prepare the mixtures are given by the thickener product company, the required thickness is not achieved when …

The Subject Librarian Newsletter, Nanoscience, Fall 2016, Sandy Avila

Libraries' Newsletters

No abstract provided.

Wave Motion Induced By Turbulent Shear Flows Over Growing Stokes Waves, Shahrdad Sajjadi, Serena Robertson, Rebecca Harvey, Mary Brown

Publications

The recent analytical of multi-layer analyses proposed by Sajjadi et al. (J Eng Math 84:73, 2014) (SHD14 therein) is solved numerically for atmospheric turbulent shear flows blowing over growing (or unsteady) Stokes (bimodal) water waves, of low-to-moderate steepness. For unsteady surface waves, the amplitude a(t)∝ekcita(t)∝ekcit, where kcikci is the wave growth factor, k is the wavenumber, and cici is the complex part of the wave phase speed, and thus, the waves begin to grow as more energy is transferred to them by the wind. This will then display the critical height to a point, where the thickness of the inner …

The Effect Of A Powered Ankle Foot Orthosis On Walking In A Stroke Subject: A Case Study, Ali Pourghasem, Ismail Ebrahimi Takamjani, Mohammad Taghi Karimi, Mohammad Kamali, Mohammad Jannesari, Iman Salafian

Department of Mechanical and Materials Engineering: Faculty Publications

[Purpose] Standing and walking are impaired in stroke patients. Therefore, assisted devices are required to restore their walking abilities. The ankle foot orthosis with an external powered source is a new type of orthosis. The aim of this study was to evaluate the performance of a powered ankle foot orthosis compared with unpowered orthoses in a stroke patient.

[Subjects and Methods] A single stroke subject participated in this study. The subject was fitted with three types of ankle foot orthosis (powered, posterior leg spring, and carbon ankle foot orthoses). He was asked to walk with and without the three types …

Finite Element Simulation And Additive Manufacturing Of Stiffness-Matched Niti Fixation Hardware For Mandibular Reconstruction Surgery, Ahmadreza Jahadakbar, Narges Shayesteh Moghaddam, Amirhesam Amerinatanzi, David Dean, Haluk E. Karaca, Mohammad Elahinia

Mechanical Engineering Faculty Publications

Process parameters and post-processing heat treatment techniques have been developed to produce both shape memory and superelastic NiTi using Additive Manufacturing. By introducing engineered porosity, the stiffness of NiTi can be tuned to the level closely matching cortical bone. Using additively manufactured porous superelastic NiTi, we have proposed the use of patient-specific, stiffness-matched fixation hardware, for mandible skeletal reconstructive surgery. Currently, Ti-6Al-4V is the most commonly used material for skeletal fixation devices. Although this material offers more than sufficient strength for immobilization during the bone healing process, the high stiffness of Ti-6Al-4V implants can cause stress shielding. In this paper, …

Drag And Shape Analysis Of Fiberglass Particles, Cody Williams

Mechanical Engineering ETDs

Settling tests were performed on particles of NUKON fiberglass to relate the drag coefficient of the particles to the Reynolds number of the particles. A new method was developed to measure fiberglass particles. The projected area, projected perimeter, and average height of the particles are measured using this method. The measurements are used to calculate the measured drag coefficient and measured Reynolds number for the particles. Data collected was compared to previous studies that focused on the settling of sand grains. A predictive correlation that was developed for sand grains was applied towards the particles of fiberglass. Tests were run …

A Visual Velocity Impedance Controller, Victor Nevarez

Mechanical Engineering ETDs

Successful object insertion systems allow the object to translate and rotate to accommodate contact forces. Compliant controllers are used in robotics to provide this accommodation. The impedance compliant controller is one of the more researched and well known compliant controllers used for assembly. The velocity filtered visual impedance controller is introduced as a compliant controller to improve upon the impedance controller. The velocity filtered impedance controller introduces a filter of the velocity impedance and a gain from the stiffness. The velocity impedance controller was found to be more stable over larger ranges of stiffness values than the position based impedance …

Design Of A Modified Stewart Platform Manipulator For Misalignment Correction, Adekunle Ayoko

Master of Technology Management Plan II Graduate Projects

This thesis work is about the design of a modified Stewart platform manipulator for misalignment correction. The common version of the Stewart platform uses six actuators. The traditional Stewart platform of this kind has a moving top plate and a fixed base plate. However, in this research, the modified design of the traditional Stewart platform is studied. It is designed to be an easy connect-disconnect platform that can wrap around different structures with different cross sections and symmetrically designed. It is able to adjust position easily by using four identical but independent linear actuators populated evenly in two parts fastened …

Numerical Computation Of Transient Response Of 2d Wedge Impact, Naresh Kumar Koyyapu

University of New Orleans Theses and Dissertations

The diverse applications of advanced marine craft ascribed to their high speed and technological advancements has led to the use of stronger and lighter metals in such crafts. High speed, in effect also increases slamming loads as higher speed increases frequency of wave encounter while operating in waves. The present study is limited to wedge impact models. Fundamentally, the study is thus about two-dimensional (2D) wedge impact in water. In an attempt to predict the structural response to impact hydrodynamic force, a beam element based finite element (FE) computer program is written and the results of the code are presented …

Experimental Methods And Practices For The Study Of Toroidal Inflated, Braided Fabric Members, Daniel J. Whitney

Electronic Theses and Dissertations

Inflatable structures have become a very important area of interest for many differing applications where lightweight packable structures are required. NASA is developing Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology that takes advantage of stacked, inflated fabric tori to form a decelerating spacecraft nose cone. The tori consist of a bladder, braided fabric shell, and reinforcing in the form of integral cords or externally bonded straps. The focus of this thesis is on the development of methods for the structural testing of inflated fabric tori and developing an enhanced understanding of their behavior. This is essential for providing insight into the …

The Mars Desert Research Station - Erau Crew 160 Expedition, Lycourgos Manolopoulos, Ashley Hollis-Bussey, Hiroki Sugimoto, Cassandra Vella, John Herman, Marc Carofano

Student Works

The Mars Desert Research Station (MDRS) is a research program which is owned and operated by the Mars Society. The MDRS is located in Hanksville, Utah which hosts simulations that are typically two weeks long for professional scientists and engineers as well as college students of all levels, in training for human operations specifically on Mars. This space analog facility is in isolation, allowing for rigorous field studies regarding research that represents a true mission as if the crew members are conducting a real expedition on Mars. Participants are assigned specific roles and tasks that are typically aligned with their …

Active Management Assistant System For Embry-Riddle Ecocar 3 Hybrid Supervisory Control System, Matthew Nelson, Blair Cutting, Michael J. Aleardi

Student Works

The Embry-Riddle EcoCAR 3 team is developing a prototype hybrid Chevrolet Camaro utilizing a customized vehicle powertrain controller. This controller is serving to ensure system safety, vehicle operation, and consumer drivability while also incorporating advanced driving aids to achieve both the desired performance levels one expects from a Camaro as well as vehicle efficiency. This vehicle must reach the team set vehicle technical specifications of a 4.9 second 0 to 60 time while maintaining a 53 miles per gallon gasoline equivalence rating.

In order to reach the efficiency goal, the team is developing an Active Management Assistance System utilizing computer …

Fuzzy Attitude Control Of Solar Sail, Joshua Baculi

Mechanical Engineering Master's Theses

This study presents various fuzzy type controllers for a solar sail. First, a Twin Parallel Distributed Compensator (TPDC) is built for a Takagi-Sugeno fuzzy model of the solarsail. The T-S fuzzy model is constructed by linearizing the existing nonlinear equations fo motion of the solar sail. The T-S fuzzy model is used to solve a set of linear matrix inequalities to derive state feedback controller gains. The TPDC controls the solar sail using a combination of reaction wheels and roll stabilizer bars for attitude control and trim masses for disturbance rejection. The TPDC tracks and stabilizes the solar sail to …

Energy-Climate-Manufacturing Nexus: New Insights From The Regional And Global Supply Chains Of Manufacturing Industries, Murat Kucukvar, Bunyamin Canseva, Gokhan Egilmez, Nuri C. Onat, Hamidreza Samadi

Mechanical and Industrial Engineering Faculty Publications

The main objectives of this research are to improve our understanding of energy-climate-manufacturing nexus within the context of regional and global manufacturing supply chains as well as show the significance of full coverage of entire supply chain tiers in order to prevent significant underestimations, which might lead to invalid policy conclusions. With this motivation, a multi region input–output (MRIO) sustainability assessment model is developed by using the World Input–Output Database, which is a dynamic MRIO framework on the world’s 40 largest economies covering 1440 economic sectors. The method presented in this study is the first environmentally-extended MRIO model that harmonizes …

An Algorithm For Calculating The Inverse Jacobian Of Multirobot Systems In A Cluster Space Formulation, Christopher Jude Waight

Mechanical Engineering Master's Theses

Multirobot systems have characteristics such as high formation re-configurability that allow them to perform dynamic tasks that require real time formation control. These tasks include gradient sensing, object manipulation, and advanced field exploration. In such instances, the Cluster Space Control approach is attractive as it is both intuitive and allows for full degree of freedom control. Cluster Space Control achieves this by redefining a collection of robots as a single geometric entity called a cluster. To implement, it requires knowing the inverse Jacobian of the robotic system for use in the main control loop. Historically, the inverse Jacobian has been …

Gaskinetic Modeling On Dilute Gaseous Plume Impingement Flows, Chunpei Cai

Michigan Tech Publications

This paper briefly reviews recent work on gaseous plume impingement flows. As the major part of this paper, also included are new comprehensive studies on high-speed, collisionless, gaseous, circular jet impinging on a three-dimensional, inclined, diffuse or specular flat plate. Gaskinetic theories are adopted to study the problems, and several crucial geometry-location and velocity-direction relations are used. The final complete results include impingement surface properties such as pressure, shear stress, and heat flux. From these surface properties, averaged coefficients of pressure, friction, heat flux, moment over the entire flat plate, and the distance from the moment center to the flat …

Design And Frequency Characterization Of Dual-Piezoresponsive Foam Sensors, Cory Nelson Newton

Theses and Dissertations

Multifunctional "self-sensing" materials at the frontiers of current research are generally designed to gather only a single type of information (such as quasi-static strain data). This project introduces a new sensor that is both multifunctional and dual-response, indicating its ability to not only perform in mechanical and sensing functions but also in its ability to sense multiple types of response. The proposed new class of sensing materials, comprised of nanocomposite polymer foams, exhibits measurable piezoresistive and quasi-piezoelectric phenomena in the form of change in resistance and voltage generation in response to deformation, respectively. An initial sampling of the envelope of …

Predictive Modeling Of A Buoyancy-Operated Cooling Tower Under Unsaturated Conditions: Adjoint Sensitivity Model And Optimal Best-Estimate Results With Reduced Predicted Uncertainties, Federico Di Rocco, Dan Gabriel Cacuci

Faculty Publications

Nuclear and other large-scale energy-producing plants must include systems that guarantee the safe discharge of residual heat from the industrial process into the atmosphere. This function is usually performed by one or several cooling towers. The amount of heat released by a cooling tower into the external environment can be quantified by using a numerical simulation model of the physical processes occurring in the respective tower, augmented by experimentally measured data that accounts for external conditions such as outlet air temperature, outlet water temperature, and outlet air relative humidity. The model’s responses of interest depend on many model parameters including …

College Of Engineering Senior Design Competition Fall 2016, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge. The senior design competition helps focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects on …

Attitude Determination Control Testing System (Helmholtz Cage And Air Bearing), Nicolas Theoret

Honors Theses

The WALI team at Western Michigan University requested a test environment to validate their CubeSat’s de-tumbling control system and hardware. The test environment required a Helmholtz cage and spherical air bearing. The Helmholtz cage provides an adjustable magnetic field to simulate low earth orbit; the spherical air bearing simulates the friction free environment the CubeSat will experience in space. In conjunction, the two components create an adjustable system that simulates a satellite in low earth orbit.

Energy Optimization And Fuel Economy Investigation Of A Series Hybrid Electric Vehicle Integrated With Diesel/Rcci Engines, Ali Solouk, Mahdi Shahbakhti

Michigan Tech Publications

Among different types of low temperature combustion (LTC) regimes, eactively controlled compression ignition (RCCI) has received a lot of attention as a promising advanced combustion engine technology with high indicated thermal efficiency and low nitrogen oxides ( NOx" role="presentation" style="box-sizing: border-box; max-height: none; display: inline; line-height: normal; word-spacing: normal; overflow-wrap: normal; white-space: nowrap; float: none; direction: ltr; max-width: none; min-width: 0px; min-height: 0px; border: 0px; padding: 0px; margin: 0px; position: relative;">NOx ) and particulate matter (PM) emissions. In this study, an RCCI engine for the purpose of fuel economy investigation is incorporated in series hybrid electric vehicle (SHEV) architecture, …

Expression And The Functional Study Of Fusion Proteins Α-Amylase And Hemolysin- Αas An Application In Biofilm Polysaccharide Degradation, Gede Yuda Sugiarta, Anggoro Wiseso, Siska Yuliana Sari, Etri Dian Kamila, Vanessa Geraldine, Diana Christina, Muhammad Hanifi, Dwiantari Satyapertiwi, Robby Hertanto, Budiman Bela, Masafumi Yohda, Muhamad Sahlan

Makara Journal of Technology

Biofilm is an aggregate of consortium bacteria that adhere to each other on a surface. It is usually protected by the exopolysaccharide layer. Various invasive medical procedures, such as catheterization, endotracheal tube installation, and contact lens utilization, are vulnerable to biofilm infection. The National Institute of Health (NIH) estimates 65% of all microbial infections are caused by biofilm. Periplasmic α-amylase (MalS) is an enzyme that hydrolyzes α-1, 4- glicosidic bond in glycogen, starch, and others related polysaccharides in periplasmic space. Another protein called hemolysin-α (HlyA) is a secretion signal protein on C terminal of particular peptide in gram negative bacteria. …

Thermoeconomic Optimization Of Cascade Refrigeration System Using Mixed Carbon Dioxide And Hydrocarbons At Low Temperature Circuit, Nasruddin Nasruddin, Arnas Arnas, Ahmad Faqih, Niccolo Giannetti

Makara Journal of Technology

Many applications and industrial processes require very low cooling temperature, such as cold storage in the biomedical field, requiring temperature below -80 °C. However, single-cycle refrigeration systems can only achieve the effective cooling temperature of -40 °C and, also, the performance of the cycle will decrease drastically for cooling temperatures lower than -35°C. Currently, most of cascade refrigeration systems use refrigerants that have ozone depletion potential (ODP) and global warming potential (GWP), therefore, in this study, a cascade system is simulated using a mixture of environmentally friendly refrigerants, namely, carbon dioxide and a hydrocarbon (propane, ethane or ethylene) as the …

Effect Of Milling On The Densification Of Sic-Basedcomposites From Polysilazane, Alfian Noviyanto, Toshiyuki Nishimura

Makara Journal of Technology

High density SiC-based composites from polysilazane were fabricated by high energy milling and hot pressing. After cross-linking at 200 °C, the polysilazane was pyrolysed at 1000 °C in N2 for 2 h to form amorphous Si-C-N-O followed by high energy milling for 1 h. Milled amorphous Si-C-N-O was sintered in hot pressing at 1600 and 1700 °C for 1 h in vacuum under the applied pressure of 50 MPa. Although no sintering additives were used, dense SiC-based composites were obtained with this method. Sintered density was 3.04 g/cm3, while only 2.57 g/cm3 for amorphous Si-C-N-O without milling. It is suggested …

Design Of The Human Assembly Strategy In A Self-Optimizing Assembly Cell: A Case Study Of Indonesians, Novie Susanto, Ratna Purwaningsih, Kharisma Panca Kurniawati

Makara Journal of Technology

This paper presents a continuing study of the human cognitive aspect application in the technical systems. The last studies design a human-centered design based on the German culture. The result shows a significant difference of human performance between Germans and Indonesians. Therefore, this study examines the human cognitive model based on Indonesian culture to investigate whether the different cognitive model based on the culture aspect can improve the human performance. The study was conducted on 60 people classified by age, young (16-34 years old) and old (older than 34 years old). Participants render predictions on an assembly activity for two …

Thermal And -Γ –Ray Irradiation Effects On The Ionic Conductivity Of (Licl)X(Montmorillonite)1-X, Safei Purnama, Aziz Khan Jahja, Takeshi Sakuma

Makara Journal of Technology

Compositesof montmorillonite (MMT) - lithium salts have been prepared using a simple process of powders mixing followed by heating. The powders resulting from this method are expected to beionic conductors with a high ionic conductivity characteristics. This characteristics is also further improved by employing gamma-ray irradiation technique at specified irradiation doses. The best results were obtained for the (LiCl)0.5(MMT)0.5 composite with a room temperature ionic conductivity of 2.192 mS/cm, which then increases to ~5 mS/cm after gamma irradiation at a dose of 400 kGy. This value is equivalent to the value of the ionic conductivity of current commercial rechargeable lithium …