Engineering Commons^™

Photobioreactor Design For Improved Energy Efficiency Of Microalgae Production, Alexander Burns

Master's Theses

ABSTRACT

Photobioreactor Design for Improved Energy Efficiency of Microalgae Production

Alexander Burns

The objective of this research was to investigate a new photobioreactor (PBR) design for microalgae production that retains the typical advantages of existing tubular PBRs while reducing power consumption by providing simultaneous culture circulation and gas exchange with airlift alone and no centrifugal recirculating pump. Traditional tubular PBR designs feature a compressed air supply and a centrifugal pump for culture circulation and gas exchange. Circulation and gas exchange in a closed-system PBR is necessary to keep the algae suspended and to provide sufficient mass transfer (mainly for the …

Investigation Of Dairy Wastewater Using Biowish, Ada Mingwah Chan

Master's Theses

Various bacterial products from BiOWiSH^TM Technologies have been tested in dairy wastewater experiments to determine the bacterial mixes’ ability for enhanced degradation of biochemical oxygen demand (BOD), solids, and nitrate concentrations. The dairy wastewater was augmented with various bacterial composition obtained from BiOWiSH^TM. The bacterial mixes experimented were US Aqua, Thai Aqua, BMT, Osprey, Fruit Wash, KLB, LCM1, and MDG. Method development was a crucial process to optimize and test the effects of the BiOWiSH^TM Technologies bacterial mixes.

After 5 experiments, the BOD tests showed that for some of the tests, the redosage of bacteria helped …

Experiment And Simulation Of The Acoustic Signature Of Fatigued-Cracked Gears In A Two-Stage Gearbox, Matthew James Ostiguy

Master's Theses

This thesis focuses on the development of a health monitoring system for gearbox transmissions. This was accomplished by developing and understanding a two-stage gearbox computer model that emulates an actual gearbox test rig. The computer model contains actual gearbox geometry, flexible shafts, bearings, gear contact forces, input motor torque, output brake torque, and realistic gearbox imbalance. The gear contact force of each gear stage and the input bearing translational acceleration were the main outputs compared between a healthy gearbox and damaged gearbox computer model. The damage of focus was a fatigue crack on the input pinion gear. A sideband energy …

Analysis And Optimization Of The Scheffler Solar Concentrator, Simone Alberti

Master's Theses

The Scheffler reflector is a new solar concentrator design which maintains a fixed focus while only having a single axis tracking mechanism. This design makes the construction and operation of high temperature solar concentrators accessible to developing nations. In this project, I wrote computer simulation codes to better understand the dynamics and the effect of deformation or deviations from ideal conditions in order to define necessary manufacturing and operational tolerances. These tools and knowledge drove the prototyping of new reflector concepts by myself and other students on my team. A fiberglass prototype was able to drive the cost of a …

Development Of A Digital Controller For Motor Control Experiments In The Ee472 Lab, Jeffrey David D'Amelio

Master's Theses

A digital motor controller for student lab use is designed, built, and tested. The controller uses an encoder for position measurement, and an H-bridge to drive the electromechanical plant.

A user interface is created to enhance usability of the device. The user interface is able to display key parameters of the control algorithm as well as the state of the system. It is also used to modify the gains and sample rate of the control algorithm.

The design of the system is refined, and 10 units are built for the EE472 Digital Controls Lab. The lab manuals for the first …

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …

Field And Greenhouse Studies Of Phytoremediation With California Native Plants For Soil Contaminated With Petroleum Hydrocarbons, Pahs, Pcbs, Chlorinated Dioxins/Furans, And Heavy Metals, Matthew Robert Poltorak

Master's Theses

Native and naturalized California plant species were screened for their phytoremediation potential for the cleanup of soil contaminated with petroleum hydrocarbons (PHCs), poly-aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), chlorinated dioxins/furans, and heavy metals. This screening was followed by controlled greenhouse experiments to further evaluate the phytoremediation potential of the best candidates. Field specimens and soils used for this study were collected from the former Energy Technology Engineering Center (ETEC) at the Santa Susana Field Laboratory in Southern California that was operated by the Department of Energy (DOE). Soils at this site contain all of the contaminants of interest (COIs). Nine …

Vascular Reactivity In Newly-Formed And Mature Arterialized Collateral Capillaries, Sara K. Hellstrom

Master's Theses

Peripheral arterial occlusive disease (PAOD) is a globally-prevalent cardiovascular disease in which atherosclerotic plaques narrow arterial lumen diameters and restrict blood flow to downstream tissues. The impact of these occlusions can be mitigated by collateral vessels that connect parallel arterial branches and act as natural bypasses to maintain perfusion. In animal models that lack collateral arterioles, capillaries that connect terminal arteriolar segments can arterialize and form functional collaterals following an ischemic event; however, in the early stages of development, vasodilation is impaired. We explored the mechanism of impaired vasodilation in arterialized collateral capillaries (ACCs) and pre-existing collaterals (PECs) by evaluating …

The Effect Of Artery Bifurcation Angles On Fluid Flow And Wall Shear Stress In The Middle Cerebral Artery, Zachary Ramey Jones

Master's Theses

Saccular aneurysms are the abnormal plastic deformation of veins and arteries that can lead to lethal thrombus genesis or internal hemorrhaging. Medication and surgery greatly reduce the mortality rates, but treatment is limited by predicting who will develop aneurysms. A common location for saccular aneurysm genesis is at the main middle cerebral artery (MCA) bifurcation. The main MCA bifurcation is comprised of the M1 MCA segment, parent artery, and two M2 segments, daughter arteries. Studies have found that the lateral angle (LA) ratio of the MCA bifurcation is correlated with aneurysm formation. The LA ratio is defined as the angle …

Protective Effects Of Milk Phospholipids Against Uv-Induced Dna Damage In Human Skin Cells, Lan-Anh Nguyen

Master's Theses

Skin cancer is the most common type of cancer in the US. The American Academy of Dermatology estimated that more than 3.5 million new cases of skin cancer are diagnosed in the US each year and 1 in 5 Americans will likely to develop skin cancer in their life time. Most cases of skin cancer are caused by exposure to ultraviolet (UV) radiation from the sun. Some of the most common sunscreen ingredients are unstable and can form harmful radicals upon exposure to UV radiation. There is a strong clinical need for a more stable and effective sunscreen ingredient such …

Examining Ambiguities In The Automatic Packet Reporting System, Kenneth W. Finnegan

Master's Theses

The Automatic Packet Reporting System (APRS) is an amateur radio packet network that has evolved over the last several decades in tandem with, and then arguably beyond, the lifetime of other VHF/UHF amateur packet networks, to the point where it is one of very few packet networks left on the amateur VHF/UHF bands. This is proving to be problematic due to the loss of institutional knowledge as older amateur radio operators who designed and built APRS and other AX.25-based packet networks abandon the hobby or pass away. The purpose of this document is to collect and curate a sufficient body …

A Pareto-Frontier Analysis Of Performance Trends For Small Regional Coverage Leo Constellation Systems, Christopher Alan Hinds

Master's Theses

As satellites become smaller, cheaper, and quicker to manufacture, constellation systems will be an increasingly attractive means of meeting mission objectives. Optimizing satellite constellation geometries is therefore a topic of considerable interest. As constellation systems become more achievable, providing coverage to specific regions of the Earth will become more common place. Small countries or companies that are currently unable to afford large and expensive constellation systems will now, or in the near future, be able to afford their own constellation systems to meet their individual requirements for small coverage regions.

The focus of this thesis was to optimize constellation geometries …

The Relationship Between Bicycles And Traffic Safety For All Road Users, Jasmine A. Martin

Master's Theses

Over the past twenty years bicycle use as a mode of transportation has grown considerably in the United States. Other studies have examined the individual bicyclist’s risk in proportion to the growth in cycling across cities, a phenomenon referred to as ‘safety in numbers.’ This study expands from that research and examines the effect of cyclists on road safety for all road users.

The study examines the roles of bicycle modal split, a city wide analysis, and bicycle infrastructure, a site based analysis, in road safety outcomes. For the city based analysis, twenty years of crash data in 12 California …

Cold Flow Performance Of A Ramjet Engine, Harrison G. Sykes

Master's Theses

The design process and construction of the initial modular ramjet attachment to the Cal Poly supersonic wind tunnel is presented. The design of a modular inlet, combustor, and nozzle are studied in depth with the intentions of testing in the modular ramjet. The efforts undertaken to characterize the Cal Poly supersonic wind tunnel and the individual component testing of this attachment are also discussed. The data gathered will be used as a base model for future expansion of the ramjet facility and eventual hot fire testing of the initial components. Modularity of the inlet, combustion chamber, and nozzle will allow …

Growth Media And Lipid Determination Comparison Of High Rate Algae Ponds, Eric Alexander Nicolai

Master's Theses

Growth Media and Lipid Determination Comparison

of High Rate Algae Ponds

Eric Alexander Nicolai

The feasibility of algal biofuel production relies on the use of a non-potable water source. Municipal wastewater is nutrient-rich and a cost effective option as a growth media in algae ponds. However, this resource may be too valuable for algal biomass production, as reclaimed wastewater is needed for surface irrigation and groundwater recharge. This thesis compares the performance of 4.2 m² high rate algal raceway ponds (HRAPs) to 33 m² HRAPs grown on primary settled wastewater during a media recycling study and a growth …

Development Of A High Precision Quantum Dot Synthesis Method Utilizing A Microfluidic Reactor And In-Line Fluorescence Flow Cell, William Henry Lafferty

Master's Theses

Quantum dots show great potential for use as spectral converters in solar cells, lighting applications, and biological imaging. These applications require precise control of quantum dot size to maximize performance. The quality, size, and fluorescence of quantum dots depend on parameters that are difficult to control using traditional batch synthesis processes. An alternative, high precision process was developed for the synthesis of cadmium-selenide quantum dots using a microfluidic reactor and fluorescence flow cell. The process required creating separate cadmium and selenium precursors that were then mixed in a nitrogen environment at 17°C. Using an NE-300^® syringe pump, the solution …

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan, David Jonathan Gonzalez Campos

Master's Theses

A Study Of Shock Analysis Using The Finite Element Method Verified With Euler-Bernoulli Beam Theory; Mechanical Effects Due To Pulse Width Variation Of Shock Inputs; And Evaluation Of Shock Response Of A Mixed Flow Fan

David Jonathan González Campos

For many engineers that use finite element analysis or FEA, it is very important to know how to properly model and obtain accurate solutions for complicated loading conditions such as shock loading. Transient acceleration loads, such as shocks, are not as common as static loads. Analyzing these types of problems is less understood, which is the basis for this study. FEA …

Improving And Expanding The Capabilities Of The Poly-Picosatellite Orbital Deployer, David Pignatelli

Master's Theses

The Poly-Picosatellite Orbital Deployer (P-POD) has undergone a series of revisions over the years. The latest revision, described in this Master’s Thesis, incorporates new capabilities like EMI shielding, an inert gas purge system, and an electrical interface to the CubeSats after they are integrated into the P-POD. Additionally, some mass reduction modifications are made to the P-POD, while its overall strength is increased. The P-POD inert gas purge system successfully flew, on a previous revision P-POD. The P-POD components are analyzed to a set of dynamic loads for qualification, and successfully undergoes random vibration qualification testing. The P-POD encounters some …

Effects Of Low Velocity Impact On The Flexural Strength Of Composite Sandwich Structures, Jeffrey Scott Carter

Master's Theses

The use of composite sandwich structures is rapidly increasing in the aerospace industry because of their increased strength-to-weight and stiffness-to-weight characteristics. The effects of low velocity impacts on these structures, however, are the main weakness that hinders further use of them in the industry because the damages from these loadings can often be catastrophic. Impact behavior of composite materials in general is a crucial consideration for a designer but can be difficult to describe theoretically. Because of this, experimental analysis is typically used to attempt to describe the behavior of composite sandwiches under impact loads. Experimental testing can still be …

Control Of A Spacecraft Using Mixed Momentum Exchange Devices, Blake J. Currie

Master's Theses

Hardware configurations, a control law, and a steering law are developed for a mixed hardware spacecraft that uses both control moment gyros and reaction wheels. Replacing one or more gyros in a spacecraft with a reaction wheel has potential for cost savings while still achieving much greater performance than using reaction wheels alone. Several simulated tests are run to compare the performance to a traditional all reaction wheel or all control moment gyro spacecraft, including analysis of failure modes and singular configurations. The mixed system performed similarly to all gyro systems, responding within 6% of the gyro system’s time for …

Hybrid Silicon Mode-Locked Laser With Improved Rf Power By Impedance Matching, Bassem M. Tossoun

Master's Theses

The mode-locked laser diode (MLLD) finds a lot of use in applications such as ultra high-speed data processing and sampling, large-capacity optical fiber communications based on optical time-division multiplexing (OTDM) systems. Integrating mode-locked lasers on silicon makes way for highly integrated silicon based photonic communication devices. The mode-locked laser being used in this thesis was built with Hybrid Silicon technology. This technology, developed by UC Santa Barbara in 2006, introduced the idea of wafer bonding a crystalline III- V layer to a Silicon-on-insulator (SOI) substrate, making integrated lasers in silicon chips possible.

Furthermore, all mode-locked lasers produce phase noise, which …

Vibration Based Planetary Gear Analysis And Damage Detection, Rene Sawatzky

Master's Theses

With this thesis the research at the engineering department is continued, based on previous thesis projects. These projects were considering the possibility of simulation gears with rigid bodies. After researches with different emphasizes on the rigid body simulation, the gained knowledge showed limitations of the rigid body model. Gear failures are very diverse and the actual simulation technique could not represent all necessary failure modes that can occur. That led to this thesis as a research project to find a way to detect and analyze the failure modes that cannot be considered with the current rigid body approach. With the …

Development Of A Silicon Nanowire Mask Using Scanning Probe Microscopy, Ross Gregoriev

Master's Theses

Scanning probe microscopy techniques were used to investigate the desorption of hydrogen passivated silicon to form SiO2 etch masks The application of the etch masks were planned on being used to manufacture silicon nanowires. Low concentration hydrofluoric acid was used to passivate the surface. The surface was selectively depassivated by SPM techniques. Scanning tunneling microscopy (STM) and atomic force microscopy (AFM) were used to create the masks. The STM system used was found to desorb hydrogen from the surface faster than the STM could image and was considered incapable in the configuration investigated. This led to the use of atomic …

Avoided Water Cost Of Electricity Generation For Solar Pv And Wind Technologies In Southern California, Matthew Cohen

Master's Theses

The objective of this thesis is to provide a foundation for evaluating the water costs associated with electricity production to calculate the avoided water cost of energy for solar PV and wind technologies relative to coal, natural gas, nuclear, geothermal, concentrated solar thermal, and biomass. Water consumption is estimated for energy production (fuel extraction and preparation) and electricity generation (power plant operation) using the best available information from published articles. The quantity of water consumed for electricity production is monetized for a Southern California case study based on the water rates of Metropolitan Water District of Southern California (MET), which …

Treatment Of Nitrogen Oxides By Chlorella Vulgaris Algae In Photobioreactors, Steven Shihady

Master's Theses

The effectiveness of algae to treat NO₂and NO in simulated flue gas was tested using Chlorella vulgaris in photobioreactors (PBRs) using NO_xconcentrations between 30 ppm to 780 ppm. NO_xdissolved and reacted in water to form NO₃^-and NO₂^-in the PBR growth medium, providing a nitrogen source that the algae readily assimilated for cell synthesis. Three 20-L photobioreactors were inoculated with a pure culture of C. vulgaris prepared in Bristol growth medium and algae were grown in the PBRs at 25°C and pH of 7.0 in a modified Bristol medium …

Interfacial Interactions Between Carbon Nanoparticles And Conjugated Polymers, Yanqi Luo

Master's Theses

Conjugated polymer based electronics, a type of flexible electronic devices, can be produced from solution by traditional printing and coating processes in a roll-to-roll format such as papers and graphic films. This shows great promise for the emerging energy generation and conversion. The device performance of polymer electronics is largely dependent of crystalline structures and morphology of photoactive layers. However, the solution crystallization kinetics of conjugated polymers in the presence of electron acceptor nanoparticles has not been fully understood yet. In this study, solution crystallization kinetics of poly (3-hexylthiophene) in the presence of carbon nanotubes and graphene oxide has been …

Nerve Fiber Diameter Measurements Using Hematoxylin And Eosin Staining And Brightfield Microscopy To Assess The Novel Method Of Characterizing Peripheral Nerve Fiber Distributions By Group Delay, Jorge Arturo Vazquez

Master's Theses

Peripheral neuropathies are a set of common diseases that affect the peripheral nervous system, causing damage to vital connections between various parts of the body and the brain and spinal cord. Different clinical conditions are known to selectively impact various size nerve fibers, which often makes it difficult to diagnose which peripheral neuropathy a patient might have. The nerve conduction velocity diagnostic test provides clinically useful information in the diagnosis of some peripheral neuropathies. This method is advantageous because it tends to be minimally invasive yet it provides valuable diagnostic information. However, this test does not determine characteristics of peripheral …

Effect Of Adaptive Tabs On Drag Of A Square-Base Bluff Body, Brian W. Barker

Master's Theses

This thesis involves the experimental wind tunnel testing of a 0.127m by 0.127m square-base bluff body to test the effectiveness of trailing edge tabulations to reduce drag in the Cal Poly 0.912m by 1.219 m low-speed wind tunnel. To accomplish this, the boundary layer was first measured on the trailing edge of the model for the three speeds at 10, 20, and 30 m/s, with Re = 8.3e4, 1.6e5 and 2.5e5 respectively, without the tabs. Three different tests were performed to determine the effectiveness of the tabs. These tests included base pressure measurements, total drag force measurements and hotwire velocity …

Stereo Vision System Module For Low-Cost Fpgas For Autonomous Mobile Robots, Connor Citron

Master's Theses

Stereo vision uses two adjacent cameras to create a 3D image of the world. A depth map can be created by comparing the offset of the corresponding pixels from the two cameras. However, for real-time stereo vision, the image data needs to be processed at a reasonable frame rate. Real-time stereo vision allows for mobile robots to more easily navigate terrain and interact with objects by providing both the images from the cameras and the depth of the objects. Fortunately, the image processing can be parallelized in order to increase the processing speed. Field-programmable gate arrays (FPGAs) are highly parallelizable …

Development And Use Of Moisture-Suction Relationships For Geosynthetic Clay Liners, Jacob Law Risken

Master's Theses

A laboratory test program was conducted to determine the moisture-suction relationships of geosynthetic clay liners (GCLs). Moisture-suction relationships were determined by combining suction data from pressure plate tests, contact filter paper tests, and relative humidity tests, then fitting water retention curves (WRCs) to the data. WRCs were determined for wetting processes and drying processes in terms of gravimetric moisture content and volumetric moisture content.

The effects of GCL type, hydration solution, wet-dry cycles, and temperature on the moisture-suction relationships were analyzed. The three GCLs of the test program consisted of configurations of woven and nonwoven geotextiles reinforced with needlepunched fibers. …