Engineering Commons^™

Numerical Modeling Of Infrared Thermography Techniques Via Ansys, Hayder Abdulnabi Thajeel

Masters Theses

"Several inspection techniques have been developed over years. Recently, infrared thermography (IRT) technology has become a widely accepted as a nondestructive inspection (NDI) technique for different fields and various applications as well. Infrared thermography stands as one of the most an attractive and a successful NDI technique that has ability to detect the object's surface/subsurface defects remotely based on observing and measuring the surface's emitted infrared heat radiation by using an infrared camera. The finite element modeling FEM ANSYS was successfully used for the modelling of several IRT techniques; such as Pulsed Thermography (PT) and Lock-in Thermography (LT) that can …

Firmware And Software For An Integrated Electrophysiology Data Acquisition And Stimulation System, Kyle D. Batzer

Masters Theses

This thesis describes the firmware and software design for a prototype electrophysiology experimentation system. The overall system, built on the work of previous students and developed with fellow graduate student Mr. Donovan Squires, provides eight channels of acquisition and four channel of arbitrary waveform generation for stimulation of biological systems. In order to show the performance of the system, a common electrophysiology experiment was performed on the giant axon of an earthworm and the results were compared to previously validated systems. The developed system is intended to support future work at the Neurobiology Engineering Laboratory at Western Michigan University.

The …

Use Of Polymer Rapid Tools As Functional Injection Mold Tooling, Sean Derrick

Masters Theses

Conventional tool making for injection molded plastics is expensive, time consuming, and generates a great deal of waste. Presently, industry is waiting for what is commonly referred to as Rapid Tooling (RT). The greatest opportunity for RT implementation would be the use of Additively Manufacturing (AM) technology. Specifically, AM techniques which use a high strength polymer resin substrate.

The following research is an initial feasibility study to determine if Polymer Rapid Tools (PRTs) could be used as functional injection mold tooling. The objective of the research was to determine if a PRT could mold a variety of features to a …

The Onset Of Purely Elastic And Thermo-Elastic Instabilities In The Taylor-Couette Flow: Influence Of Gap Ratio And Fluid Thermal Sensitivity, Mohammadreza Ghanbari

Masters Theses

Linear stability analysis of Taylor-Couette flow of dilute polymeric solutions has been performed by using two prototypical constitutive equations for polymeric solutions namely, the Oldroyd-B and the FENE-P models. The hydrodynamic stability characteristics of the flow in presence and absence of thermal effects and in the limit of vanishing fluid inertia have been determined using an eigenvalue analysis. Particular attention has been paid to accurate determination of the instability onset conditions as a function of fluid thermal sensitivity and gap ratio. We observe a reduction in the critical Deborah, Dec for the instability onset as the gap ratio and fluid …

Investigation Of Composite Patch Performance Under Low-Velocity Impact Loading, Geoffrey Roy Goodmiller

Masters Theses

Bonded fiber composite repair on damaged metal structures can be an effective method to restore load carrying capacity or increase damage resistance. Low velocity impacts can cause barely visible damage to the interior structure of laminated composites. Delamination between plies is of particular concern in these composites. Impacts may also create disbonds between the patch and metal substrate. A building-block approach was suggested to model impact damage to composite patches. Composite, adhesive, and metal substrate damage models were separately validated and then combined. Cohesive Zone theory modeled interlaminar composite damage and adhesive damage. Hashin failure criteria with energy dissipation based …

A Compact Ultra Wide-Band Radar System For See-Through-Wall Applications, Stephen G. Magoon

Masters Theses

A compact Ultra wide-band (UWB) radar system for through-wall applications has been developed. Lightweight, portable and low in power consumption, it is configurable for both bistatic and monostatic operation. It uses low cost, off-the-shelf surface mount components, and is ideally suited for ranging, 3d-imaging, and wall characterization. Tests show excellent pulse width generation, resulting in very broadband transmission (0.7 – 5.6 GHz) and good receiver dynamic range, resulting in accurate measurement capabilities.

Prioritizing Stormwater Management: Comparing Integrated Best Management Practices In Urban And Suburban Neighborhoods, Danielle Kathleen Norman

Masters Theses

This thesis demonstrates a comparison of two design proposals that integrate Best Management Practices to address stormwater runoff volumes in urban and suburban neighborhoods. The thesis investigation includes the selection and comparison of two diverse neighborhoods to inform design decisions. It then assesses the environmental, social and economic implications of the design proposal in each neighborhood.

The site selection process is a method that overlays specific criterion such as residential land use, topographic features, and median household income (3) nested scales; the watershed scale, the sub-watershed scale, and the neighborhood scale. For the purposes of this paper, nested scales are …

Automated Fragmentary Bone Matching, Ali Saad Mustafa

Masters Theses

Identification, reconstruction and matching of fragmentary bones are basic tasks required to accomplish quantification and analysis of fragmentary human remains derived from forensic contexts. Appropriate techniques for three-dimensional surface matching have received great attention in computer vision literature, and various methods have been proposed for matching fragmentary meshes; however, many of these methods lack automation, speed and/or suffer from high sensitivity to noise. In addition, reconstruction of fragementary bones along with identification in the presence of reference model to compare with in an automatic scheme have not been addressed. In order to address these issues, we used a multi-stage technique …

Standardized Longitudinal Connection Detail For Decked Precast Prestressed Concrete Girders, Ramzi Muftah Ali Abduallah

Masters Theses

The use of decked precast prestressed concrete girders (DPPCG) is becoming popular in accelerated bridge construction. DPPCGs are assembled and connected on site using grout or concrete longitudinal connections. The durability performance of these connections is a concern. The objective of this research is to document the longitudinal connection behavior with respect to its design parameters, and establish a process for developing a standardized connection detail considering the demands due to live load and temperature gradient (TG) load. In order to demonstrate this process, decked bulb-tee and decked box-beam girders were considered. Finite element models, under various types and levels …

Single-Depot Vehicle Routing Problem For Home Delivery Of Pharmaceutical Products, Kimberly Starr Harms

Masters Theses

Some retail pharmacies offer home delivery services to establish a competitive advantage in the growing healthcare market. The handling of orders for home delivery includes several internal and external processing and transportation activities. In this work, models were developed for use in a pharmacy delivery system to assist personnel in their daily activities. This work includes standard operating procedures for picking, packing and loading of delivery orders and the assignment and routing of vehicles to deliver customer orders. Results from simulated delivery areas identified interesting tradeoffs when comparing densely populated areas to sparsely populated areas. In addition, recommendations for order …

Implementation And Analysis Of A 1.4l Turbo Liquid Cooled Cac And Ac Condenser System, Mitchell Zajac

Masters Theses

This project report serves as a continuation and finalization of an overall experience with the design process including working on the development of system components, working with automotive industry leaders, suppliers and dealing with the aspects of business and production feasibility. The development of a dual level cooling concept to apply Centro Richerche Fiat established components on a Chrysler Group vehicle application was the foundation of the design project completed in December 2012 by Matt Cutler and Mitch Zajac. The development of this system aimed to decrease overall vehicle power consumption, minimize overall system packaging space, and to increase vehicle …

Instrumentation Electronics For An Integrated Electrophysiology Data Acquisition And Stimulation System, Donovan Squires

Masters Theses

The Neurobiology Engineering Laboratory at Western Michigan University has need of an electrophysiology instrumentation system combining generation of multiple arbitrary stimulation waveforms and recording of action potentials on multiple channels. Electronics for an instrumentation system with the capability of generating four unique stimulation waveforms and recording action potentials on eight channels were developed and implemented on a printed circuit board. Collaboration with fellow graduate student, Mr. Kyle Batzer, who developed firmware and software for the instrumentation system as described in his thesis, was essential for successful realization of the instrumentation system. Knowledge gained and reported by previous students working in …

A Privacy-Aware Distributed Storage And Replication Middleware For Heterogeneous Computing Platform, Jilong Liao

Masters Theses

Cloud computing is an emerging research area that has drawn considerable interest in recent years. However, the current infrastructure raises significant concerns about how to protect users' privacy, in part due to that users are storing their data in the cloud vendors' servers. In this paper, we address this challenge by proposing and implementing a novel middleware, called Uno, which separates the storage of physical data and their associated metadata. In our design, users' physical data are stored locally on those devices under a user's full control, while their metadata can be uploaded to the commercial cloud. To ensure the …

An Implantable Low Pressure Biosensor Transponder, Chad Eric Seaver

Masters Theses

The human body’s intracranial pressure (ICP) is a critical element in sustaining healthy blood flow to the brain while allowing adequate volume for brain tissue within the relatively rigid structure of the cranium. Disruptions in the body’s maintenance of intracranial pressure are often caused by hemorrhage, tumors, edema, or excess cerebral spinal fluid resulting in treatments that are estimated to globally cost up to approximately five billion dollars annually. A critical element in the contemporary management of acute head injury, intracranial hemorrhage, stroke, or other conditions resulting in intracranial hypertension, is the real-time monitoring of ICP. Currently such monitoring can …

An Experimental Study Of Hemispherical Vortex Generators For Separation Control Over A Naca-0012, David Joseph Ronald Tucker

Masters Theses

This is a study towards understanding hemispherical vortex generators (VGs) and their effectiveness on delaying flow separation over an airfoil. To be tested was whether these devices could generate a horseshoe vortex structure that effectively entrained higher momentum flow into the boundary layer over the surface of a NACA-0012 wing section. The experimental results are primarily from water tunnel experiments, but the clean configuration NACA-0012 airfoil was investigated by numerical methods in order to ascertain the potential for numerical modeling as a tool to accurately predict flow around the VGs, and as a guide for size and location optimization. At …

Analytical Solutions For A Large-Scale Long-Lived Rotating Layer Of Fluid Heated Underneath, Pouya Jalilian

Masters Theses

In this work, the system of equations for a large- scale long lived rotating layer of fluid with the deformable upper free surface and non-deformable lower free surface heated underneath has been reviewed and derived. The quasi-geostrophic approximation, the beta effect and the method of multi-scale expansions have been employed to and as a result, an equation governing the evolution of large-scale perturbations, has been derived. The effect of each term present in the upper surface deformation equation has been analyzed and the analytical solutions have been obtained by virtue of employing auxiliary Riccati equation method. The soliton solutions obtained …

Fuctional Properties Of Phthalocyanine Dye Based Inks, Yumeizhi Jia

Masters Theses

Currently, inkjet printing techniques are getting more attention. They have the features of non-contact and additive patterning feasibility, compatibility with different substrates (the materials on which the ink is printed), low temperature processing, and low cost (1) (2). They can be used for patterning solution processable polymers or nanoparticle inks on various substrates including conductive materials, paper and glass (3). The need for proper functional inks is increasing every year. The goal of my work was to formulate a phthalocyanine water based ink, which can work as a dielectric ink. In my research, all the materials which were used to …

An On-Chip Transformer-Based Digital Isolator System, Cory Lynn Fandrich

Masters Theses

An on-chip transformer-based digital isolator has been designed, fabricated, and tested. This isolation technique is designed to function between a low voltage microcontroller and a potentially high-voltage power control system. The isolator’s isolation capability is determined by two factors, the RMS blocking voltage strength and common-mode transient immunity. The integrated circuit solution is designed in a high-temperature capable SOI process.

The on-chip transformer size is minimized by utilizing high frequency voltage pulses. A small transformer and overall small chip footprint of the design are favorable for integration into a larger system. The isolator is a two chip solution, an isolated …

Arm Inductance And Sub-Module Capacitance Selection In Modular Multilevel Converter, Yalong Li

Masters Theses

Arm inductor and sub-module (SM) capacitor are two key components in the modular multilevel converter (MMC). Optimizing the selection of arm inductance and sub-module capacitance is thus critical for the converter design. This report aims at developing a selection principle for arm inductance and sub-module capacitance in MMC.

Arm inductors in MMC are used to limit the circulating current which flows within the converter. The switching frequency harmonic is found to be the dominant component in the circulating current when an active circulating current suppressing controller is implemented. The analytical relationship between the arm inductance and switching frequency circulating current …

A Framework To Predict High Risk Roadways For Pedestrians In Tennessee, Zane Hunter Pannell

Masters Theses

Pedestrians and bicyclists are a class of vulnerable road users that are often over-represented in incapacitating injury or fatal crash statistics. Because non-motorized trips are vital to many urban and rural residents for utility or recreation and exercise, it is essential to identify safety deficiencies in our existing transportation infrastructure to address rising injuries and fatalities among this group of road users. As the economy continues to struggle and fuel prices remain high, many cities and rural transportation agencies are seeing large increases in bicycling, walking, and transit ridership. While passenger car fatalities have shown sharp declines in the last …

A Novel Approach To Multiphysics Modeling Of Heat And Mass Transfer In Porous Media, Seth Allen Pemberton

Masters Theses

This thesis aims to investigate conjugate heat and mass transfer in porous media with an emphasis on textiles. Both hygroscopic materials, those that absorb water vapor, and non-hygroscopic materials are examined. A model was developed that utilizes COMSOL’s equation-based partial differential equation (PDE) interface which allows the user to input any equation(s) to be solved. By the use of experimental and numerical data each part of the model, i.e. flow field, gas diffusion, convection and vapor absorption, is verified. The accuracy of the equation-based unsteady flow field is verified by modeling the flow over a circular cylinder and extracting the …

Modeling And Validation Of Heat Transfer Present In A Solar Thermal Collector, Eric Ezekiel Stannard

Masters Theses

A solar absorber panel for a solar water heating system located at the College of Architecture’s New Norris House in Norris, TN was modeled and validated against field data in this work. The purpose of this modeling was to create the foundations of a tool that can be used in collector design and building energy simulations. This tool would take into account the radiometric properties of the collector materials, which are essential for an accurate model. Solar water heaters convert the shortwave energy of the Sun into usable heat for residential and industrial applications and have the potential to greatly …

Spectroscopic, Thermal, And Physical Analysis Of The Raw Materials In Europium Doped Cesium Strontium Iodide Scintillator, Bonnie Dell Blalock

Masters Theses

Scintillators are widely used in homeland security applications that utilize gamma-ray spectroscopy. An ideal scintillator for this purpose should possess a high effective atomic number, high light yield, and good energy resolution. The scintillator CsSrI₃: Eu [cesium strontium iodide: europium], recently developed at the Scintillation Materials Research Center, has excellent properties. Recent efforts have been made to evaluate the basic thermal properties and IR spectra of the compound’s raw materials as part of a project to improve the quality of grown crystals. Fourier transform infrared spectroscopy of high purity anhydrous CsI [cesium iodide], SrI₂ [strontium iodide], and …

A Sige Bicmos Lvds Driver For Space-Borne Applications, Matthew Ian Laurence

Masters Theses

When designing an integrated circuit for use during an interstellar mission, certain precautions must be made. The electronics on any off-earth mission will be exposed to wide temperature swings and harmful radiation due to being outside of the Earth’s protective ionosphere. It is crucial that any data path present be immune to these detrimental effects.

The introduction of galactic radiation can not only cause the onboard electronics to fail due to device degradation and single event latchup but can also lead to background radiation being coupled into the signal path as unwanted noise, degrading the signal to noise ratio. Unwanted …

Characterization Of Heat Transfer Coefficient Uncertainty In Support Of High Temperature Probe Measurement Technology, Marcus S. Conner

Masters Theses

The development of new materials and processes have enabled defense, industrial, and research devices that operate in high temperature environments. Measurement technology must keep up with the demand of these environments.

The objective of this work is to provide a correlation between the heat transfer coefficient (and Nusselt Number) and the flow Reynolds number (and Prandtl number) for a truncated cylindrical probe. The correlation provides reduced uncertainty for materials whose heat transfer coefficient is not well defined. The configuration for the experiment uses the University of Tennessee Space Institute’s (UTSI) blow down air supply system discharging into a duct and …

An Occupant-Based Dynamic Simulation Tool For Predicting Residential Power Demand And Quantifying The Impact Of Residential Demand Response, Brandon Jeffrey Johnson

Masters Theses

With their large impact on the power system and widespread distribution, residential loads provide vast resources that if utilized correctly have the potential to help reduce both electricity cost and demand throughout the day. Previous research in this area has been primarily focused on building more energy efficient homes and improving the efficiencies of appliances and lighting technologies. Far less attention has been given to the ability of residential loads to provide various demand response services. Residential loads with demand response capabilities have the potential to be very useful in both peak shifting and regulation applications, and could be utilized …

Investigation Of The One-Probe And Two-Probe Calibration Integral Equation Methods Using Experimental Data, Abhay Sanjeev Pande

Masters Theses

This work aims to expand the applicability of the recently devised physics-based Calibration Integral Equation Method (CIEM) at the University of Tennessee Knoxville, for solving the Inverse Heat Conduction Problem (IHCP) as applied to a one-dimensional domain. Contrary to conventional schemes of solving the IHCP, the CIEM does not require the knowledge of the thermo-physical properties of the domain, sensor characterization and sensor probe locations. The pertinent information is implicitly accounted for via an experimental run. The experimental run ‘calibrates’ the physics of the domain and is called the ‘calibration run’. The net surface heat flux during a real ‘unknown’ …

An Automated Finite Element Analysis Framework For The Probabilistic Evaluation Of Composite Lamina Properties, Jonathan Phillips Weigand

Masters Theses

This thesis outlines the development of computational modeling tools used to predict the elastic properties of composite lamina from representative volume elements (RVE) using numerical methods. The homogenization approach involves the use of Gauss’s Theorem to simply the average volumetric strain integral into a surface integral containing which is defined by surface displacements and their direction. Simulations of RVEs under specific loading conditions (longitudinal tension or shear and transverse tension or shear) are then performed in the software package ABAQUS to obtain the surface displacements. It was found that obtaining quality meshes and applying periodic boundary conditions for each RVE …

Formulation And Evaluation Of Resistive Inks For Applications In Printed Electronics, Sughosh Satish Bhore

Masters Theses

In the 21^st century, it has been shown that printing methodologies can be used to print electrically functional devices on a variety of substrates. In comparison to conventional electronic manufacturing methods, printing is a more cost effective and less complex process. The requirements for manufacturing Printed Electronics (PE) components are much more demanding than graphic printing applications due to the additional requirement of easy electron flow. This additional requirement increases the need for print uniformity and layer-to-layer registration to a much higher degree. In this work, hybrid UV-curable, water-based, electrical resistive inks were formulated. Inkjet inks were prepared by …

Improved Deinkability Of Lep (Liquid Electrophotography) Digital Prints, Zheng Wei

Masters Theses

Digital printing plays a very important role in the life of modern society. With the development of digital printing technologies, and the increasing market share of digital printing, the amount of digital prints in waste paper is rapidly increasing. Under “green” manufacturing and environmental sustainability, deinking of digital print inks is an urgent problem that needs to be solved. Indigo is a typical series of HP (Hewlett-Packard) digital presses that use a liquid ink named ElectroInk (Liquid Electrophotography or LEP). The particle size of HP ElectroInk is very small, 1-2 microns, which is smaller than dry toners. But, during flotation, …