Engineering Commons^™

Applying Best Practices To Florida Local Government Retrofit Programs, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

In some communities, local government and non-profit entities have funds to purchase and renovate distressed, foreclosed homes for resale in the affordable housing market. Numerous opportunities to improve whole house energy efficiency are inherent in these comprehensive renovations. BA-PIRC worked together in a multiyear field study making recommendations in individual homes, meanwhile compiling improvement costs, projected energy savings, practical challenges, and labor force factors surrounding common energy-related renovation measures. The field study, Phase 1 of this research, resulted in a set of best practices appropriate to the current labor pool and market conditions in central Florida to achieve projected annual …

Development And Validation Of An Absorption Sensor For Time-Resolved Measurements Of Co And Co2, Kyle Thurmond

HIM 1990-2015

A sensor was developed for simultaneous measurements of carbon monoxide and carbon dioxide fluctuations in internal combustion engine exhaust gases. This sensor utilizes low-cost and compact LEDs that emit in the 3-5[micro]m wavelength range which are more appropriate for practical applications than the more traditionally used lasers. An affordable, fast response sensor that can measure these gases has broad application that can lead to more efficient, fuel flexible engines and regulations of harmful emissions. LEDs have a more spectrally broad and diverging emission than lasers which presented many design challenges. The optical design software ZEMAX was utilized to overcome these …

Fracture Toughness Of A Hyperelastic Material During Surgical Cutting, Kevin Smith

HIM 1990-2015

Despite being one of the most important organs of vertebrates, the material properties of skin are also one of the most poorly understood. In the field of designing medical devices and surgical tools there are significant advantages to having a model that describes the interaction of forces between a blade tip and skin during surgical cutting. In general, skin can best be described as a composite layer consisting of a viscoelastic dermis with interwoven collagen and elastin fibers beneath a superficial epidermis. The purpose of this research is to study the fracture toughness of porcine skin during practical cutting applications, …

Characterization Of Polyetherimide Under Static, Dynamic, And Multiple Impact Conditions, Bryan Zuanetti

HIM 1990-2015

The application of polymers in robust engineering designs is on the rise due to their excellent mechanical properties such as high fracture toughness, specific strength, durability, as well as, thermal and chemical resistances. Implementation of some advanced polymeric solids is limited due to the lack of available mechanical properties. In order for these materials to endure strenuous engineering designs it is vital to investigate their response in multiple loading rates and conditions. In this thesis, the mechanical response of polyethermide (PEI) is characterized under quasi-static, high strain rate, and multiple impact conditions. Standard tension, torsion, and compression experiments are performed …

Flexible Residential Test Facility: Impact Of Infiltration And Ventilation On Measured Heating Season Energy And Moisture Levels, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Perhaps no residential topic has been discussed as much among building scientists as air infiltration and required mechanical ventilation. Usually, envelope tightening is recommended as an efficiency strategy for retrofitting an existing home. In humid climates, reducing infiltration can reduce summer moisture loads. However, during drier weather when the air conditioner is not running, lower infiltration can lead to potential condensation. Even though severe cold weather is rare in the Deep South, the prevalence of single-pane windows can lead to condensation events.

Energy And Economic Optimization To Achieve Near Zero Energy Homes In Europe: Implications Of Inclusion Of Lighting And Appliances, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Achieving annual net zero energy use in homes has been demonstrated as feasible in dozens of monitored projects in the United States.[1] In particular, very low energy use homes in Europe have been proven within the Passivhaus approach.[2] Achieving 'nearly zero energy buildings' (NZEB) has also been established as a vital objective over the next decade within the European Union (EU) (Boermans et al., 2011). However, reaching this result at the lowest possible cost remains a key challenge around the world. Balancing renewable power generation with energy efficiency will be vital in Europe as anticipated by Voss, Musall and Lichtmeß.[4] …

Technical Subtopic 2.1: Modeling Variable Refrigerant Flow Heat Pump And Heat Recovery Equipment In Energyplus, Florida Solar Energy Center, Richard Raustad

FSEC Energy Research Center®

The University of Central Florida/Florida Solar Energy Center, in cooperation with the Electric Power Research Institute and several variable-refrigerant-flow air conditioning (VRF AC) manufacturers, provided a detailed computer model for a VRF AC system in the United States Department of Energy's (U.S. DOE) EnergyPlus' building energy simulation tool. No other simulation tool currently has the capability to accurately model this state-of-the-art VRF heating, ventilating, and air conditioning (HVAC) equipment. Detailed laboratory testing and field demonstrations were performed to measure equipment performance and compare this performance with that predicted by the use of this new model through computer simulation.

This project …

Current Best Practices For High Performance, Deep Energy Retrofits In Florida Affordable Housing, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

In the fall of 2009, researchers at the Florida Solar Energy Center (FSEC) began working with affordable housing entities that were conducting major renovation projects in unoccupied, foreclosed homes. The study was funded by the Florida Energy Systems Consortium and the U.S. Department of Energy's Building America program. When components and equipment were being replaced because they were worn out, researchers provided savings projections for higher-efficiency choices. Savings were also projected for improvements that were strictly for energy efficiency, such as adding ceiling insulation. The best practices summarized in this document are a mixture of assessment, design, specification, quality assurance, …

Hers Index Scores As An Alternative Compliance Path For The 2015 Iecc, Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

The analysis presented here is an extension of a previous study on HERS Index Scores as they relate to various version of the International Energy Conservation Code (IECC) by the same author. This extension of the previous study is designed to examine the impact of advanced, ultra-high efficiency appliances and high efficiency HVAC systems on HERS Index Scores as they relate to reductions in the HERS Index Scores that may be used as 'tradeoffs' against best practice envelope efficiencies.

A Simplified Approach To Thermomechanical Fatigue And Application To V-Shaped Notches, Thomas Bouchenot

HIM 1990-2015

A vast array of high value parts in land- and air-based turbomachinery are subjected to non-isothermal cycling in the presence of mechanical loading. Crack initiation, growth and eventual failure more significantly reduce life in these components compared to isothermal conditions. More accurate simulation of the stress and strain evolution at critical locations of components, as well as test specimens, can lead to a more accurate prediction of remaining life to a structural integrity specialists. The focus of this thesis is to characterize the effects of thermomechanical fatigue (TMF) on generic turbomachinery alloy. An expression that can be used to estimate …

Microscopic Surface Textures Created By Interfacial Flow Instabilities, Jing Gu

HIM 1990-2015

In nature, microscopic surface textures impact useful function, such as the drag reduction of shark skin (Dean & Bhushan, 2010) and superhydrophobicity of the lotus leaf(Pan, Kota, Mabry, & Tuteja, 2013). In this study, we explore these phenomena by re-creating microscopic surface textures via the method of interfacial flow instability in drying polyvinylidene fluoride (PVDF) acetone solutions. In general, PVDF films can be made using either spin coating or electrospray deposition with various weight concentrations in acetone. In order to study the morphology of the porous structure of PVDF films, wet deposition samples were fabricated by spin coating or near-field …

The Next Step Toward Widespread Residential Deep Energy Retrofits, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

The Building America Partnership for Improved Residential Construction (BA-PIRC) has been working with affordable housing entities to identify cost-effective technical pathways to achieve energy savings levels of 30% and safeguard or enhance indoor air quality (IAQ), durability, and comfort (McIlvaine et al. 2012; Fairey and Parker 2012).

Stormwater Harvesting Using Retention And In-Line Pipes For Treatment Consistent With The New Statewide Stormwater Rule, Martin Wanielista, Mike Hardin, Ikiensinma Gogo-Abite, Manoj Chopra

BMP Trains Research and Publications

Stormwater rules and regulations are evolving. Thus, there is a need for research that supports alternative methods for water quality treatment of runoff water. The information in this report supports the use of filtration media called Biosorption Activated Media (BAM) that improves runoff water quality. Runoff to impaired waters may need additional treatment or reduced volume of discharge to meet a mass discharge limitation. In addition, some nutrients in runoff waters may need to be removed before they percolate to nutrient sensitive areas such as aquifers with discharge to springs or estuaries. Thus, stormwater harvesting or reuse is another best …

A Computed Tomography-Based Model Of The Infant Hip Anatomy For Dynamic Finite Element Analysis Of Hip Dysplasia Biomechanics, Kyle Snethen

HIM 1990-2015

Newborns diagnosed with hip dysplasia face severe consequences when treatments fail. The Pavlik harness presents the most common worldwide treatment for correcting this medical hip abnormality in newborns, but becomes increasingly ineffective as subluxation increases. A dynamic finite element analysis on the hip joint would yield results that could provide insight to physicians as to how the Pavlik harness could be optimized to increase its success rate and develop patient-specific treatment plans. The study completes the first step in such an analysis by generating a three-dimensional model of an infant hip joint directly derived from computed tomography imaging in order …

Implementation And Testing Of A Blackbox And A Whitebox Fuzzer For File Compression Routines, Toby Tobkin

HIM 1990-2015

Fuzz testing is a software testing technique that has risen to prominence over the past two decades. The unifying feature of all fuzz testers (fuzzers) is their ability to somehow automatically produce random test cases for software. Fuzzers can generally be placed in one of two classes: black-box or white-box. Blackbox fuzzers do not derive information from a program's source or binary in order to restrict the domain of their generated input while white-box fuzzers do. A tradeoff involved in the choice between blackbox and whitebox fuzzing is the rate at which inputs can be produced; since blackbox fuzzers need …

Production, Control And Actuation Of Micron-Sized Particles In A Microfluidic T-Junction, James Wilson

HIM 1990-2015

This research is directed towards understanding the mechanisms associated with the manufacture of solid microspheres less than 100 [micrometers], from liquid droplets with nanosuspensions in a microfluidic T-junction, which are heated downstream of the channel. Preliminary material characterization tests on colloidal suspensions of alumina and copper oxide demonstrate promising temperature dependent viscosity results indicating solidification in the temperature range of 40°C-50°C. The solidification mechanism is referred to as Temperature Induced Forming and is described by polymeric bridges formed between nanoparticles in suspension at elevated temperatures, resulting in a solid structure. The polymer network results from the ionization of alumina at …

Numerical Simulation Of Fracture Of A Nano-Paper Coated E-Glass/Polyester Composite With Thermal Damage, Zachary Graham

HIM 1990-2015

Aerospace research for next-generation travel increasingly focuses on the use of advanced composites to reduce weight and cost while retaining strength. One subset of materials with great potential is based on the combination of resin matrix and glass-fiber reinforcement. This research explores the application of a candidate nanopaper coating with a given composite. Prior research applied a set of given heat fluxes to the top surface of the composite for a set of given periods of time, and subsequently performed a 3-point flexural test to determine the elastic modulus for both the coated and uncoated composite for all of the …

Strategically Minded Dynamic Analysis Of Strategic Flight Bat Maneuvers, Marie Kaspryzk

HIM 1990-2015

CATD was not only adequate for analyzing the pursuit of erratically moving prey but also worked well when analyzing the pursuit of prey that remained stationary. It cannot be fully concluded that bats utilize the CATD strategy to successfully capture erratically flying prey. The angle remains relatively constant but does not exhibit a zero change in angle as by definition. The large forces experienced by the bat were seen when the bat began to rotate its body about its pitch axis or when the bat made a large turn. Moments were seen specifically when the bat began to bank into …

Application Of Non-Local Approaches For Predicting The Response Of V-Notch Under Thermomechanical Fatigue Loading, Trung Nguyen

HIM 1990-2015

The topic of this thesis is the construction of a formula to approximate stress-strain responses at notches under thermomechanical fatigue (TMF) loading. The understanding of material behavior of the V-notched component which experiences TMF is important to the mechanical industries where V-notched structures are often utilized. In such applications, it is crucial that the designers be able to predict the material behavior; therefore, the purpose of this research is to examine and to model the precise effects a stress concentration will have on a specimen made of a generic Ni-base superalloy. The effects of non-isothermal loading will be studied, and …

Determining Appropriate Heating And Cooling Thermostat Set Points For Building Energy Simulations For Residential Buildings In North America, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Existing building energy simulation tools have a purported tendency to over-predict heating use and, in some cases, to under-predict cooling use, an outcome often attributed to inappropriate assumptions about thermostat management. As a result, a systematic review was conducted for the purposes of determining typical heating and cooling set points for single-family houses in North America. The preliminary consensus results provide an empirical basis for establishing typical inputs for building energy simulation models, increasing prediction accuracy of heating and cooling loads. The results of this review have been applied as default values in the Lawrence Berkeley National Laboratory's Home Energy …

Commuting In Portland, Oregon: The Advantages Of Living Within A Transit Oriented Development Community Compared To Traditional Suburban Development By Comparing Environmental, Economic And Health Factors, Kyle Simpson

HIM 1990-2015

Transportation is a function that affects nearly all life decisions, but is often not given much thought by the average individual throughout their daily routines. Most of this complacency streams from the mainstream development patterns in the United States that have changed little from the end of World War II. During the immediate post-war years a perfect mix for suburban living came together: the mass production of automobiles, guaranteed mortgages from the federal government through the G.I. Bill, and in 1956 the passage of the National Interstate and Defense Highways Act. These factors, along with the dominate social paradigm that …

Efficient Multifamily Homes In A Hot-Humid Climate By Atlantic Housing Partners, Florida Solar Energy Center, David Chasar

FSEC Energy Research Center®

With assistance from the Florida Solar Energy Center (FSEC) and its Building America Partnership for Improved Residential Construction (BA-PIRC), Atlantic Housing Partners (AHP)has implemented a high performance, systems-engineered package of measures in the new construction multifamily housing sector in the hot-humid climate zone. This report demonstrates how the initiative achieves Building America (BA) goals of 30%-50% energy savings. In addition, the report discusses the role of utility allowance calculations, used as part of the low-income housing tax credit process, to value those energy savings.

Results of energy modeling are presented to demonstrate that the specification package achieves 40% energy savings …

Approaches To 30% Energy Savings At The Community Scale In The Hot-Humid Climate, Florida Solar Energy Center, Stephanie Thomas-Rees

FSEC Energy Research Center®

The Building America Partnership for Improved Residential Construction, formerly the Building America Industrialized Housing Partnership, has worked with several community-scale builders within the hot-humid climate zone to improve performance of production-, or community-scale, housing. Tommy Williams Homes (Gainesville, Florida), LifeStyle Homes (Melbourne, Florida), and Habitat for Humanity (various locations, Florida) have all been continuous partners of the Building America Program. The activities of these partners, described in this report, achieved the Building America goal of 30% whole-house source energy savings using packages adopted at the community scale. For new homes, the reference case is the B10 Benchmark, aligned with 2009 …

Energy Retrofit Field Study And Best Practices In A Hot-Humid Climate, Florida Solar Energy Center, Janet Mcilvaine

FSEC Energy Research Center®

In the U.S. Census Bureau's Southern region, housing starts ranged from 4.6 to 5.9 million per decade from the 1970s through the 2000s, nearly twice as many as any other region across all decades. The potential for energy savings in these homes is vast, perhaps our most available untapped resource for reducing energy needs. This study was conducted in central Florida, which forms part of the Census Bureau's Southern region. It examines efficiency retrofit opportunities, typical renovation practices, and pathways for achieving U.S. Department of Energy (DOE) goals for existing homes in that region.

[Revised] Analysis Of Hers Index Scores For Recent Versions Of The International Energy Conservation Code (Iecc), Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

The EnergyGauge HERS software tool was used to examine the IECC Standard Reference Design (IECC SRD) configuration for one-story 2000 ft2 and two-story 2,400 ft2 single-family homes in sixteen representative U.S. cities. IECC SRD homes were configured for the 2006 IECC, the 2009 IECC and the 2012 IECC. Two additional set of analysis were conducted, both using the 2012 IECC SRD with enhanced equipment: 1) with equipment configured to meet the 2015 National Appliance Energy Conservation Act (NAECA) equipment requirements and 2) with equipment that is on the cusp of significant market penetration with efficiencies greater than the 2015 standard.HERS …

Short-Term Test Results: Transitional Housing Energy Efficiency Retrofit In The Hot-Humid Climate, Florida Solar Energy Center, Karen Sutherland

FSEC Energy Research Center®

This project evaluates the renovation of a 5,800-ft², multiuse facility located in St. Petersburg, on the west coast of central Florida, in the hot-humid climate. An optimal package of retrofit measures was designed to deliver 30%-40% annual energy cost savings for this building with annual utility bills exceeding $16,000 and high base load consumption. Researchers projected energy cost savings for potential retrofit measures based on pre-retrofit findings and disaggregated, weather-normalized utility data. A cost-benefit analysis was conducted for the seven retrofit measures implemented; adding attic insulation and sealing soffits, tinting windows, improving whole-building airtightness, upgrading heating and cooling …

Measured Cooling Performance And Potential For Buried Duct Condensation In A 1991 Central Florida Retrofit Home, Florida Solar Energy Center, David Chasar

FSEC Energy Research Center®

The Florida Solar Energy Center (FSEC) conducted energy performance monitoring of two existing residences in Central Florida that were undergoing various retrofits. These homes were occupied by FSEC researchers and were fully instrumented to yield detailed energy, temperature, and humidity measurements. The data gave feedback about the performance of two levels of retrofit in two types of homes in a hot-humid climate. This report covers a moderate-level retrofit and includes 2 years of pre-retrofit data to characterize the impact of improvements. The other home, covered in a separate report (Parker and Sherwin 2012), is a deep energy retrofit that has …

High Flux Isolated Attosecond Pulse Generation, Yi Wu

Electronic Theses and Dissertations

This thesis outlines the high intensity tabletop attosecond extreme ultraviolet laser source at the Institute for the Frontier of Attosecond Science and Technology Laboratory. First, a unique Ti:Sapphire chirped pulse amplifier laser system that delivers 14 fs pulses with 300 mJ energy at a 10 Hz repetition rate was designed and built. The broadband spectrum extending from 700 nm to 900 nm was obtained by seeding a two stage Ti:Sapphire chirped pulse power amplifier with mJ-level white light pulses from a gas filled hollow core fiber. It is the highest energy level ever achieved by a broadband pulse in a …

Understanding The Capabilities And Limitations Of Advanced Interactive M&S: A Cricothyroidotomy Simulation Case Study, Lillian Campbell-Wynn

Electronic Theses and Dissertations

Simulation for surgical education and training is increasingly perceived as a valuable contribution to traditional teaching methods providing a structured learning experience. Surgical simulations allow surgeons to practice tactics, techniques and procedures numerous times without the cost, limitations and ethical problems of using cadaver-based models. The goal of this research is to advance the use of modeling and simulation in support of emergency medical training. This research explores questions identified through a case study of two different modeling and simulation techniques – virtual reality and mannequins - in the support of combat emergency medical education and training. To reduce the …

Design Optimization Of Llc Topology And Phase Skipping Control Of Three Phase Inverter For Pv Applications, Utsav Somani

Electronic Theses and Dissertations

The world is heading towards an energy crisis and desperate efforts are being made to find an alternative, reliable and clean source of energy. Solar Energy is one of the most clean and reliable source of renewable energy on earth. Conventionally, extraction of solar power for electricity generation was limited to PV farms, however lately Distributed Generation form of Solar Power has emerged in the form of residential and commercial Grid Tied Micro-Inverters. Grid Tied Micro-Inverters are costly when compared to their string type counterparts because one inverter module is required for every single or every two PV panels whereas …