Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

2011

Technological University Dublin

Discipline
Keyword
Publication
Publication Type
File Type

Articles 1 - 30 of 175

Full-Text Articles in Engineering

Developments In Performance Monitoring Of Concrete Exposed To Extreme Environments., W. J. Mccarter, T. M. Chrisp, G. Starrs, A. Adamson, E. Owens, P. A. M. Basheer, S. V. Nanukuttan, S. Srinivasan, Niall Holmes Dec 2011

Developments In Performance Monitoring Of Concrete Exposed To Extreme Environments., W. J. Mccarter, T. M. Chrisp, G. Starrs, A. Adamson, E. Owens, P. A. M. Basheer, S. V. Nanukuttan, S. Srinivasan, Niall Holmes

Articles

The performance of the surface zone of concrete is acknowledged as a major factor governing the rate of deterioration of reinforced concrete structures because it provides the only barrier to the ingress of water containing dissolved ionic species such as chlorides, which ultimately initiate corrosion of the reinforcement. In situ monitoring of cover-zone concrete is therefore critical in attempting to make realistic predictions as to the in-service performance of the structure. To this end, this paper presents developments in a remote interrogation system to allow for continuous, real-time monitoring of the cover-zone concrete from an office setting. Use is made …


Clinical Coverage Of An Archetype Repository Over Snomed-Ct., Sheng Yu, Damon Berry, Jesus Bisbal Dec 2011

Clinical Coverage Of An Archetype Repository Over Snomed-Ct., Sheng Yu, Damon Berry, Jesus Bisbal

Articles

Clinical archetypes provide a means for health professionals to design what should be communicated as part of an Electronic Health Record (EHR). An ever-growing number of archetype definitions follow this health information modelling approach, and this international archetype resource will eventually cover a large number of clinical concepts. On the other hand, clinical terminology systems that can be referenced by archetypes also have a wide coverage over many types of health-care information.

No existing work measures the clinical content coverage of archetypes using terminology systems as a metric. Archetype authors require guidance to identify under-covered clinical areas that may need …


Nanozeolites Doped Photopolymer Layers With Reduced Shrinkage, Mohesh Moothanchery, Izabela Naydenova, Svetlana Mintova, Vincent Toal Dec 2011

Nanozeolites Doped Photopolymer Layers With Reduced Shrinkage, Mohesh Moothanchery, Izabela Naydenova, Svetlana Mintova, Vincent Toal

Articles

An acrylamide based photopolymer doped with pure silica MFI-type zeolite (silicalite-1) nanoparticles has been characterized for holographic recording purposes. The concentrations of the silicalite-1 nanoparticles in the photopolymer layers were 1, 2.5, 5 and 7.5 wt.%. The inclusion of silicalite-1 nanoparticle in the photopolymer has resulted in an increase of the diffraction efficiency by up to 40%, and decrease of the shrinkage from 1.32% to 0.57%. The best results were obtained in layers doped with 5 wt.% silicalite-1 nanoparticles.


Integration Of Upqc For Power Quality Improvement In Distributed Generation Network – A Review, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon Dec 2011

Integration Of Upqc For Power Quality Improvement In Distributed Generation Network – A Review, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Conference Papers

In this paper a technical review of the integration of a Unified Power Quality Conditioner (UPQC) in a distributed generation network is presented. Although the primary task of UPQC is to minimize grid voltage and load current disturbances along with reactive and harmonic power compensation, additional functionalities such as compensation of voltage interruption and active power transfer to the load and grid have also been identified. Connection methodologies with their advantages and disadvantages are also described. Recent improvements in capacity expansion techniques and future trends for the application of UPQC in distributed modes are also identified.


Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea Dec 2011

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …


Life Cycle Costing Template (Excel), Dermot Kehily Dec 2011

Life Cycle Costing Template (Excel), Dermot Kehily

Reports

No abstract provided.


Light Coupling Between A Singlemode-Multimode-Singlemode (Sms) Fiber Structure And A Long Period Fiber Gating, Qiang Wu, Yuliya Semenova, Youqiao Ma, Pengfei Wang, Tuan Gao, Long Jin, Gerald Farrell Dec 2011

Flood Routing In Natural Channels Using Muskingum Methods, Safa Elbashir Dec 2011

Flood Routing In Natural Channels Using Muskingum Methods, Safa Elbashir

Other resources

The accuracy of flood routing is an important subject for research in hydrology and hydraulics. Accurate information of the flood peak attenuation and the duration of the high water levels obtained by channel routing are of most importance in flood forecasting operations and flood protection works (Subramanya, 2008). This study implements two hydrological methods for channel routing, the basic Muskingum and the constant coefficient Muskingum-Cunge methods on the River Brosna, Co. Offaly in Ireland. Previous researches have reported the simplicity and applicability of these methods on most natural streams within certain limits. These limitations are encountered in the River Brosna …


Physicochemical And Microbiological Quality Of Water From A Pilot Domestic Rainwater Harvesting Facility In Ireland., Sean O'Hogain, Liam Mccarton, Niamh Mcintyre, Jenny Pender, Anna Reid Dec 2011

Physicochemical And Microbiological Quality Of Water From A Pilot Domestic Rainwater Harvesting Facility In Ireland., Sean O'Hogain, Liam Mccarton, Niamh Mcintyre, Jenny Pender, Anna Reid

Articles

DTC Research Group, Dublin Institute of Technology personnel were commissioned in 2005 by the Department of Environment, Heritage and Local Government in Ireland to assess the feasibility of utilising harvested rainwater to replace treated mains water, for non-potable uses. A pilot project was set up. The project involved the design, installation, commissioning and monitoring of rainwater harvesting facilities in a rural housing development. A monitoring program was carried out to examine the physico-chemical and microbiological quality of the harvested rainwater. Harvested rainwater was sampled monthly and tested. Analysis of the harvested rainwater quality showed a consistently high quality of raw …


Going Green, Dermot Kehily Dec 2011

Going Green, Dermot Kehily

Articles

No abstract provided.


Time To Make Renting A Long-Term Housing Choice, Lorcan Sirr Nov 2011

Time To Make Renting A Long-Term Housing Choice, Lorcan Sirr

Media

No abstract provided.


Exploring The Barriers To Independent Study And Learning In First Year Undergraduate Engineering Students?, Robert Martin Morris Nov 2011

Exploring The Barriers To Independent Study And Learning In First Year Undergraduate Engineering Students?, Robert Martin Morris

Conference papers

This mixed method case study was carried out in the Technological University Dublin, Ireland and was conducted with the co-operation of four experienced lecturers of engineering and three groups of first year undergraduate engineering students.

The main aim of the research was to identify factors which represent barriers to the independent study and learning of first year engineering students.

Many first year engineering students do not return to college for the second year of their programmes. Many reasons for this are identified in the research, including the failure of students to pass assessments and exams as a result of the …


Looking After The Best Interests Of Dublin Must Be Top Priority, Lorcan Sirr, Conor Skehan Nov 2011

Looking After The Best Interests Of Dublin Must Be Top Priority, Lorcan Sirr, Conor Skehan

Media

No abstract provided.


Dc Pulsed Atmospheric Pressure Plasma Jet Image Information, Denis P. Dowling, F T. O'Neill, Vladimir Milosavljevic, Victor J. Law Nov 2011

Dc Pulsed Atmospheric Pressure Plasma Jet Image Information, Denis P. Dowling, F T. O'Neill, Vladimir Milosavljevic, Victor J. Law

Articles

This paper presents optical imaging and optical emission spectroscopy (OES) data of an atmospheric-pressure plasma jet. It is shown how the visual information and OES information of the air discharge are related as the blown arc extends from the nozzle (2-4 mm) with a molecular nitrogen rotational temperature on the order of 1700 K and the flowing afterglow beyond this region is dominated by the cooler (300-K) NO-O chemiluminescent reaction that produces NO2 species.


Liquid Crystal Devices For Optical Communications And Sensing Applications, Sunish Mathews Nov 2011

Liquid Crystal Devices For Optical Communications And Sensing Applications, Sunish Mathews

Doctoral

This thesis is focussed on the design and development of liquid crystal based tunable photonic devices for applications in optical communications and optical sensing, with an emphasis on all-fiber device configuration. The infiltration of liquid crystals into photonic crystal fiber provides a suitable common platform to design and fabricate simple and compact all-fiber tunable photonic devices which can be easily integrated with optical fiber networks and sensing systems. Based on the infiltration of liquid crystals – materials with high dielectric anisotropy, into photonic crystal fibers a common platform is developed to address the need for electronically tunable photonic devices with …


A Test Method For Optimal Micro-Screen Drum Filter Selection, Eoin Dolan, Ronan Oliver, Niall Murphy, Michael O'Hehir Nov 2011

A Test Method For Optimal Micro-Screen Drum Filter Selection, Eoin Dolan, Ronan Oliver, Niall Murphy, Michael O'Hehir

Other resources

In order to meet increasing demand for seafood worldwide Recirculation Aquaculture Systems (RAS) are frequently used. These systems are susceptible to contamination by waste matter including faecal material in the water. It is imperative that this material is removed from the system. The maintenance of good water quality is a pre-requisite to the success of the operation. Negligence in this area will adversely affect animal growth rates and also the economic performance of the system.

Micro-screen drum filters are a popular solution for the removal of this material (Cripps, Simon J. and Bergheim, Asbjørn., 2000). These screens are nominally rated …


Bs News November/December Nov 2011

Bs News November/December

Building Services Engineering

No abstract provided.


Technical Note: Friction Factor Diagrams For Pipe Flow, Jim Mcgovern Oct 2011

Technical Note: Friction Factor Diagrams For Pipe Flow, Jim Mcgovern

Articles

This technical note describes diagrams of friction factor for pipe flow that have been prepared using, mainly, the equations that Lewis Moody used to prepare his famous diagram in 1944. The preparation of the new diagrams was prompted by the need for vector graphics versions that could be used for teaching purposes and that could be distributed freely to students and others under a Creative Commons Attribution-Share-Alike license. Using a structure very similar to that of Moody's diagram, variants with the Darcy friction factor and the Fanning friction factor have been prepared. In addition, variants have been prepared that include …


Domestic Application Of Micro Wind Turbines In Ireland: Investigation Of Their Economic Viability, Zhe Li, Fergal Boyle, Anthony Reynolds Oct 2011

Domestic Application Of Micro Wind Turbines In Ireland: Investigation Of Their Economic Viability, Zhe Li, Fergal Boyle, Anthony Reynolds

Articles

Electricity generation from renewable sources of energy will be a key part in the development of future strategies for many countries globally. This renewable electricity generation will be hugely important for Ireland, due to its lack of fossil fuel resources. The extremely good wind resource available provides Ireland with the opportunity of generating vast amount of electricity from wind energy. Large-scale wind electricity generation reached 1264 MW installed capacity by January 2010 in Ireland. However, micro scale wind electricity generation has not been very popular in Ireland to-date. The unclear economics of micro wind turbines, under Irish conditions, is considered …


Numerical Study Of An Ion-Exchanged Glass Waveguide Using Both Two-Dimensional And Three-Dimensional Models, Pengfei Wang, Yuliya Semenova, Jie Zheng, Qiang Wu, Agus Hatta, Gerald Farrell Oct 2011

Numerical Study Of An Ion-Exchanged Glass Waveguide Using Both Two-Dimensional And Three-Dimensional Models, Pengfei Wang, Yuliya Semenova, Jie Zheng, Qiang Wu, Agus Hatta, Gerald Farrell

Articles

A numerical study is carried out to compare the two-dimensional (2-D) case and three-dimensional (3-D) case for the modelling of an ion-exchanged glass waveguide. It is shown that different waveguide widths on the photomask correspond to different ion concentration distributions after an annealing process. A numerical example is presented of two waveguide sections with different widths indicates that due to the abrupt change of the waveguide width, a 3-D theoretical model is required for an accurate prediction of the parameters of ion-exchanged glass waveguides. The good agreement between the modelled and measured results proves that the developed 3-D numerical model …


A Remote Interrogation System For Monitoring Concrete Performance Exposed To Environmental Action, Niall Holmes Oct 2011

A Remote Interrogation System For Monitoring Concrete Performance Exposed To Environmental Action, Niall Holmes

Other resources

The performance of the surface zone of concrete is acknowledged as a major factor governing
the rate of deterioration of reinforced concrete structures as it provides the only barrier to the
ingress of water containing dissolved ionic species such as chlorides which, ultimately,
initiate corrosion of the reinforcement. In-situ monitoring of cover-zone concrete is critical in
attempting to make realistic predictions as to the in-service performance of the structure. To
this end, this paper presents developments in a remote interrogation system to allow
continuous, real-time monitoring of the cover-zone concrete from an office setting. Use is
made of a multi-electrode …


Performance Of Elotex®Copra900 As A Corrosion Inhibitor, Niall Holmes Oct 2011

Performance Of Elotex®Copra900 As A Corrosion Inhibitor, Niall Holmes

Other resources

Corrosion inhibitors as cement additions consist of powders or solutions that are added to concrete when mixed to prevent or delay corrosion. This paper presents an early-age evaluation of a new corrosion inhibitor, namely ELOTEX®COPRA900 following a corrosion and durability study on concrete samples with different cementitious materials.

A comparison of the corrosion inhibition properties of ELOTEX®COPRA900 against a well known and established corrosion inhibitor on the market, namely Calcium Nitrite and a control with no corrosion inhibitor product. Calcium Nitrite works by increasing the threshold of chlorides required for corrosion to begin. ELOTEX®COPRA900 …


Supply Chain And Logistics Technology Investment In Small And Medium-Sized Enterprises, Edward Sweeney Oct 2011

Supply Chain And Logistics Technology Investment In Small And Medium-Sized Enterprises, Edward Sweeney

Practitioner Journals

No abstract provided.


Active Learning For Text Classification, Rong Hu Oct 2011

Active Learning For Text Classification, Rong Hu

Doctoral

Text classification approaches are used extensively to solve real-world challenges. The success or failure of text classification systems hangs on the datasets used to train them, without a good dataset it is impossible to build a quality system. This thesis examines the applicability of active learning in text classification for the rapid and economical creation of labelled training data. Four main contributions are made in this thesis. First, we present two novel selection strategies to choose the most informative examples for manually labelling. One is an approach using an advanced aggregated confidence measurement instead of the direct output of classifiers …


Rational Efficiency Of A Heat Exchanger, Jim Mcgovern, Brian P. Smyth Sep 2011

Rational Efficiency Of A Heat Exchanger, Jim Mcgovern, Brian P. Smyth

Articles

The authors propose a new and unique definition for the rational efficiency of a heat exchanger. This new rational efficiency is defined in terms of its sub-rational efficiencies: a heat transfer rational efficiency and a friction rational efficiency for each of the fluid systems comprising the heat exchanger. The heat transfer rational efficiency is based on the definition of a mean temperature for the heat source and a mean temperature for the heat sink and reflects the exergy supplied and the exergy received, due to heat transfer only. The friction rational efficiency for each fluid system of the heat exchanger …


Investigating Polymer-Tool Steel Interfaces To Predict The Work Of Adhesion For Demoulding Force Optimisation, Kevin Delaney, David Kennedy, Giuliano Bissacco Sep 2011

Investigating Polymer-Tool Steel Interfaces To Predict The Work Of Adhesion For Demoulding Force Optimisation, Kevin Delaney, David Kennedy, Giuliano Bissacco

Conference Papers

Demoulding parts from replication tools is a critical stage of replication processes such as injection moulding and hot embossing. This challenge increases as part size decreases since components and associated replication cores become more fragile and liable to damage. Understanding interfacial characteristics between a polymer and the tool surface is critical to optimise the demoulding of such parts from replication tools. The strength of the polymer-tool interaction is characterised by the adhesion energy and is specific for a particular polymer-tool pair. It’s magnitude depends upon the tool material, the chemical structure of the polymer, the processing conditions and the surface …


Inverted Pendulum Swing Up Controller, David Kennedy, James Conlon Sep 2011

Inverted Pendulum Swing Up Controller, David Kennedy, James Conlon

Conference Papers

The inverted pendulum is a classic control problem. The system is open – loop unstable and continuously wants to reach equilibrium by falling over. The system must be stabilised by means of feedback. The developed inverted pendulum system is shown in Figure 1.

In order to balance the pendulum in the inverted position the pivot must be moved continuously to correct the falling pendulum. This is similar to trying to vertically balance a broom on your hand. This interesting control problem is fundamentally the same as those involved in rocket or missile propulsion. The rocket has to balance on its …


Creating A Uniform Magnetic Field For The Equi-Biaxial Physical Testing Of Magnetorheological Elastomers; Electromagnet Design, Development And Testing., Dave Gorman, Stephen Jerrams, Ray Ekins, Niall Murphy Sep 2011

Creating A Uniform Magnetic Field For The Equi-Biaxial Physical Testing Of Magnetorheological Elastomers; Electromagnet Design, Development And Testing., Dave Gorman, Stephen Jerrams, Ray Ekins, Niall Murphy

Conference Papers

No abstract provided.


Productivity Evaluation Of Self-Adaptive Software Model Driven Architecture, Basel Magableh Sep 2011

Productivity Evaluation Of Self-Adaptive Software Model Driven Architecture, Basel Magableh

Articles

Anticipating context changes using a model-based approach requires a formal procedure for analysing and modelling context-dependent functionality and stable description of the architecture which supports dynamic decision-making and architecture evolution. This article demonstrates the capabilities of the context-oriented component-based application-model-driven architecture (COCA-MDA) to support the development of self- adaptive applications; the authors describe a state-of-the-art case study and evaluate the development effort involved in adopting the COCA-MDA in constructing the application. An intensive analysis of the applica- tion requirements simplified the process of modelling the application’s behavioural model; therefore, instead of modelling several variation models, the developers modelled an extra-functionality …


Analysis Of Converter Connected Synchronous Wind Turbines To Grid Disturbances., Joseph Kearney, Michael Conlon, Eugene Coyle Sep 2011

Analysis Of Converter Connected Synchronous Wind Turbines To Grid Disturbances., Joseph Kearney, Michael Conlon, Eugene Coyle

Conference papers

This paper investigates the performance of synchronous generators to grid voltage unbalance and grid faults. A Model of a synchronous generator with a full converter is implemented in the SimPowerSystems toolbox in Matlab/Simulink. Methods to modify the converter control schemes to improve the synchronous generator systems response to grid voltage unbalance and grid faults are investigated. Grid faults including grid voltage unbalance, and line-to-ground faults are introduced into the model at specific times to analyse the performance of the wind generation system. Improvements in the performance of the synchronous generator WECS to the grid disturbances are illustrated.