Engineering Commons^™

Pin-Wise Loading Optimization And Lattice–To-Core Coupling For Isotopic Management In Light Water Reactors, Hermilo Hernandez Noyola

Doctoral Dissertations

A generalized software capability has been developed for the pin-wise loading optimization of light water reactor (LWR) fuel lattices with the enhanced flexibility of control variables that characterize heterogeneous or blended target pins loaded with non-standard compositions, such as minor actinides (MAs). Furthermore, this study has developed the software coupling to evaluate the performance of optimized lattices outside their reflective boundary conditions and within the realistic three-dimensional core-wide environment of a LWR.

The illustration of the methodologies and software tools developed helps provide a deeper understanding of the behavior of optimized lattices within a full core environment. The practical applications …

Multivariate Optimization Of Neutron Detectors Through Modeling, Martin Rodney Williamson

Doctoral Dissertations

Due to the eminent shortage of 3He, there exists a significant need to develop a new (or optimize an existing) neutron detection system which would reduce the dependency on the current 3He-based detectors for Domestic Nuclear Detection Office (DNDO) applications. The purpose of this research is to develop a novel methodology for optimizing candidate neutron detector designs using multivariate statistical analysis of Monte Carlo radiation transport code (MCNPX) models. The developed methodology allows the simultaneous optimization of multiple detector parameters with respect to multiple response parameters which measure the overall performance of a candidate neutron detector. This is achieved by …

Environmental Impacts To Stream Acidification And Brook Trout Populations In The Great Smoky Mountains National Park, Keil Jason Neff

Doctoral Dissertations

This research supports development of aquatic resource management strategies to address acid deposition in the Great Smoky Mountain National Park (GRSM) by 1) developing relationships between baseflow and stormflow chemical constituents and examining effects of elevation, area, geology, soil, and vegetation on stream chemistry; 2) evaluating physiological condition in brook trout in relation to changes in stream chemistry during stream acidification episodes, and 3) evaluating brook trout metrics with respect to stream chemistry, basin characteristics, and ecologically relevant hydrologic parameters. (1) Stream chemistry was monitored in eight GRSM streams considering basin area, site elevation, Anakeesta geology, soil, and vegetation. Following …

Durability And Fatigue Behavior Of Cip Concrete Connections For Accelerated Bridge Construction, Peng Zhu

Doctoral Dissertations

Continuous longitudinal and transverse U-bar joint connections between flanges of the decked bulb-Ts (DBTs) or between precast panels for accelerated bridge construction are investigated. The procedure for selecting durable closure pour (CP) materials for the connections is discussed firstly. The accelerated construction is quantified as two categories: overnight cure and 7-day cure of CP materials. Candidate materials are selected first based on literature review as well as tests of compressive strength and flow and workability. Then, performance criteria for selecting durable CP materials for both categories are developed based on durability tests of selected candidate materials. These durability tests include …

Adaptive Voltage Control Methods Using Distributed Energy Resources, Huijuan Li

Doctoral Dissertations

Distributed energy resources (DE) with power electronics interfaces and logic control using local measurements are capable of providing reactive power related to ancillary system services. In particular, local voltage regulation has drawn much attention in regards to power system reliability and voltage stability, especially from past major cascading outages. This dissertation addresses the challenges of controlling the DEs to regulate the local voltage in distribution systems.

First, an adaptive voltage control method has been proposed to dynamically modify the control parameters of a single DE to respond to system changes such that the ideal response can be achieved. Theoretical analysis …

Characterization And Fabrication Of Active Matrix Thin Film Transistors For An Addressable Microfluidic Electrowetting Channel Device, Seyeoul Kwon

Doctoral Dissertations

The characterization and fabrication of active matrix thin film transistors (TFTs) has been studied for an addressable microfluidic electrowetting channel device as application. A new transparent semiconductor material, Amorphous Indium Gallium Zinc Oxide (a-IGZO), is used for TFT, which shows high electrical performance rather than amorphous silicon based TFT; higher mobility and even higher transparency. The purpose of this dissertation is to optimize each TFT process including the optimization of a-IGZO properties to achieve robust device for application. To minimize hysteresis of TFT curves, the gate dielectric is discussed extensively in this dissertation. By optimizing gas ratio of NH3SiH4, it …

Dependence Of Microstructure Evolution, Texture, And Mechanical Behavior Of A Mg Alloy On Thermo-Mechanical Input During Friction Stir Processing, Zhenzhen Yu

Doctoral Dissertations

In this thesis, the relationship among friction stir processing (FSP) parameters, microstructure evolution, texture development, and mechanical hehavior of AZ31B Mg alloy was investigated.

First of all, in order to reveal the correlation among the deformation conditions, dynamic recrystallization (DRX) mechanisms, and microstructure evolution in the Mg alloy, hot compression tests at a wide range of Zener-Hollomon parameter (Z) values were conducted. Through optical microscopic examination, it was found out that above a critical Z value, twinning influences the DRX process resulting in a more effective grain refinement, which is manifested in a significant change in the slope of the …

Thin Film Combinatorial Synthesis Of Advanced Scintillation Materials, Jonathan Daniel Peak

Doctoral Dissertations

The development and application of a combinatorial sputtering thin film technique to screen potential scintillation material systems was investigated. The technique was first benchmarked by exploring the binary lutetium oxide-silicon oxide material system, which successfully identified the luminescence phases of the system, Lu2SiO5 (LSO) and Lu2Si2O7 (LPS). The second application was to optimize the activator concentration in cerium doped LSO. The successfully optimized cerium concentration in the thin film LSO of 0.34 atomic percent was much greater than the standard cerium concentration in single crystal LSO. This lead to an intensive study based on temperature dependent steady-state and lifetime photoluminescence …

Energetics And Kinetics Of Dislocation Initiation In The Stressed Volume At Small Scales, Tianlei Li

Doctoral Dissertations

Instrumented nanoindentation techniques have been widely used in characterizing mechanical behavior of materials in small length scales. For defect-free single crystals under nanoindentation, the onset of elastic-plastic transition is often shown by a sudden displacement burst in the measured load-displacement curve. It is believed to result from the homogeneous dislocation nucleation because the maximum shear stress at the pop-in load approaches the theoretical strength of the material and because statistical measurements agree with a thermally activated process of homogeneous dislocation nucleation. For single crystals with defects, the pop-in is believed to result from the sudden motion of pre-existing dislocations or …

Molecular-Level Modeling Of Proton Transport In Aqueous Systems And Polymer Electrolyte Membranes: A Reactive Molecular Dynamics Study, Myvizhi Esai Selvan

Doctoral Dissertations

Proton exchange membrane (PEM) fuel cells are an eco-friendly power source that has great potential to reduce our oil dependence for our stationary and transportation applications. In order to make PEM fuel cells an economically viable option, further effort is needed to improve proton conduction under wide operating conditions and reduce the cost of production. Design and synthesis of novel membranes that have superior characteristics require a fundamental molecular-level understanding of the relationship between the polymer chemistry, water content and proton conduction. The performance of a fuel cell is influenced by the electrochemical and molecular/proton transport processes that occur at …

Multi-Modular Integral Pressurized Water Reactor Control And Operational Reconfiguration For A Flow Control Loop, Sergio Ricardo Pereira Perillo

Doctoral Dissertations

This dissertation focused on the IRIS design since this will likely be one of the designs of choice for future deployment in the U.S and developing countries. With a net 335 MWe output IRIS novel design falls in the “medium” size category and it is a potential candidate for the so called modular reactors, which may be appropriate for base load electricity generation, especially in regions with smaller electricity grids, but especially well suited for more specialized non-electrical energy applications such as district heating and process steam for desalination. The first objective of this dissertation is to evaluate and quantify …

Halloysite Clay Nanotubes For Controlled Delivery Of Chemically Active Agents, Elshard Abdullayev

Doctoral Dissertations

In this work we explored the capabilities of halloysite nanotubes as capsules for encapsulation and controlled delivery of the chemically and biologically active substances. Halloysite is a two-layered aluminosilicate which has a predominantly hollow tubular structure in the submicron range and is chemically similar to kaolinite [1, 2].

In the first section of this work, we analyzed the structure of the halloysite nanotubes as well as its capability to encapsulate and deliver biologically and chemically active agents, similarities and differences between release characteristics of different agents and how these differences relate with their chemical structure. Models were used to describe …

Classification Of Emg Signals To Control A Prosthetic Hand Using Time-Frequesncy Representations And Support Vector Machines, Juan Manuel Fontana

Doctoral Dissertations

Myoelectric signals (MES) are viable control signals for externally-powered prosthetic devices. They may improve both the functionality and the cosmetic appearance of these devices. Conventional controllers, based on the signal's amplitude features in the control strategy, lack a large number of controllable states because signals from independent muscles are required for each degree of freedom (DoF) of the device. Myoelectric pattern recognition systems can overcome this problem by discriminating different residual muscle movements instead of contraction levels of individual muscles. However, the lack of long-term robustness in these systems and the design of counter-intuitive control/command interfaces have resulted in low …

Surface Morphology Of Platelet Adhesion Influenced By Activators, Inhibitors And Shear Stress, Melanie Groan Watson

Doctoral Dissertations

Platelet activation involves multiple events, one of which is the generation and release of nitric oxide (NO), a platelet aggregation inhibitor. Platelets simultaneously send and receive various agents that promote a positive and negative feedback control system during hemostasis. Although the purpose of platelet-derived NO is not fully understood, NO is known to inhibit platelet recruitment. NO's relatively large diffusion coefficient allows it to diffuse more rapidly than platelet agonists. It may thus be able to inhibit recruitment of platelets near the periphery of a growing thrombus before agonists have substantially accumulated in those regions.

Results from two studies in …

Nonlinear Control Strategy For A Cost Effective Myoelectric Prosthetic Hand, Cristian Federico Pasluosta

Doctoral Dissertations

The loss of a limb tremendously impacts the life of the affected individual. In the past decades, researchers have been developing artificial limbs that may return some of the missing functions and cosmetics. However, the development of dexterous mechanisms capable of mimicking the function of the human hand is a complex venture. Even though myoelectric prostheses have advanced, several issues remain to be solved before an artificial limb may be comparable to its human counterpart. Moreover, the high cost of advanced limbs prevents their widespread use among the low-income population.

This dissertation presents a strategy for the low-level of control …

An Improved Layer-By-Layer Self-Assembly Technique To Generate Biointerfaces For Platelet Adhesion Studies: Dynamic Lbl, Juan Manuel Lopez

Doctoral Dissertations

Layer-by-layer self-assembly (LbL) is a technique that generates engineered nano-scale films, coatings, and particles. These nanoscale films have recently been used in multiple biomedical applications. Concurrently, microfabrication methods and advances in microfluidics are being developed and combined to create "Lab-on-a-Chip" technologies. The potential to perform complex biological assays in vitro as a first-line screening technique before moving on to animal models has made the concept of lab on a chip a valuable research tool.

Prior studies in the Biofluids Laboratory at Louisiana Tech have used layer-by-layer and in vitro biological assays to study thrombogenesis in a controlled, repeatable, engineered environment. …

Management Tool For Assessment Of Alternative Fuel Cycles, Jeffrey R. Preston

Doctoral Dissertations

A new approach to fuel cycle uncertainty analysis and optimization is presented that combines reactor physics information, spent fuel management, and economic forecasting, which may be used to investigate effects of decisions in the design of advanced nuclear fuel cycles. The Matlab-based simulation includes isotopic mass and integral decay heat data produced by reactor physics codes in the SCALE package (SAS2, ORIGEN-ARP, and ORIGEN-S). Reactor physics data for Light Water Reactor (LWR), and metal- and oxide-fueled Liquid Metal-cooled Fast Burner Reactor (LMFBR) designs are stored in databases that the code uses as needed. Detailed models of the once through and …

Boiling Water Reactor Core Simulation With Generalized Isotopic Inventory Tracking For Actinide Management, Jack Douglas Galloway

Doctoral Dissertations

The computational ability to accurately simulate boiling water reactor operation under the full range of standard steady-state operation, along with the capability to fully track the isotopic distribution of any fueled region in any location in the core has been developed. This new three-dimensional node-by-node capability can help designers track, for example, a full suite of minor and major actinides, fission products, and even light elements that result from depletion, decay, or transmutations. This isotopic tracking capability is not restricted to BWRs and can be employed in the modeling of PWRs, CANDUs, and other reactor types that can be modeled …

Study Of Deformation Behavior Of Nanocrystalline Nickel Using Nanoindentation Techniques, Changli Wang

Doctoral Dissertations

Nanocrystalline materials with grain size less than 100 nm have been receiving much attention because of their unparallel properties compared with their microcrystalline counterparts. Because of its high hardness, nanocrystalline nickel has been used for MEMS. Long term thermomechnical properties and deformation mechanism at both ambient and elevated temperatures need to be evaluated which is vital for reliability of its applications as structural material.

In this thesis, nanoindentation creep of nanocrystalline nickel with an as-deposited grain size of 14 nm was characterized at elevated temperatures. The nanoindentation creep rate was observed to scale with temperature and applied load (or stress), …

Scene Segmentation And Object Classification For Place Recognition, Chang Cheng

Doctoral Dissertations

This dissertation tries to solve the place recognition and loop closing problem in a way similar to human visual system. First, a novel image segmentation algorithm is developed. The image segmentation algorithm is based on a Perceptual Organization model, which allows the image segmentation algorithm to ‘perceive’ the special structural relations among the constituent parts of an unknown object and hence to group them together without object-specific knowledge.

Then a new object recognition method is developed. Based on the fairly accurate segmentations generated by the image segmentation algorithm, an informative object description that includes not only the appearance (colors and …

Effects Of 2000-2050 Global Climate Change On Ozone And Particulate Matter Air Quality In The United States Using Models-3/Cmaq System, Yun-Fat Lam

Doctoral Dissertations

The Models-3/Community Multi-scale Air Quality modeling system (CMAQ), coupled with Goddard Institute for Space Studies (GISS) atmospheric General Circulation Model (GCM), fifth Generation Mesoscale Model system (MM5), and Goddard Earth Observing System-CHEMistry (GEOS-Chem), was used to simulate atmospheric concentration of ozone and particulate matter over the continental United States 12-km and 36-km (CONUS) domains at year 2000 and year 2050. In the study, GISS GCM model outputs interfaced with MM5 were utilized to supply the current and future meteorological conditions for CMAQ. The conventional CMAQ profile initial and boundary conditions were replaced by time-varied and layer-varied GEOS-Chem outputs. The future …

Matching Vehicle License Plate Numbers Using License Plate Recognition And Text Mining Techniques, Francisco Moraes Oliveira Neto

Doctoral Dissertations

License plate recognition (LPR) technology has been widely applied in many different transportation applications such as enforcement, vehicle monitoring and access control. In most applications involving enforcement (e.g. cashless toll collection, congestion charging) and access control (e.g. car parking) a plate is recognized at one location (or checkpoint) and compared against a list of authorized vehicles. In this research I dealt with applications where a vehicle is detected at two locations and there is no list of reference for vehicle identification.

There seems to be very little effort in the past to exploit all information generated by LPR systems. In …

Adaptive Performance And Power Management In Distributed Computing Systems, Ming Chen

Doctoral Dissertations

The complexity of distributed computing systems has raised two unprecedented challenges for system management. First, various customers need to be assured by meeting their required service-level agreements such as response time and throughput. Second, system power consumption must be controlled in order to avoid system failures caused by power capacity overload or system overheating due to increasingly high server density. However, most existing work, unfortunately, either relies on open-loop estimations based on off-line profiled system models, or evolves in a more ad hoc fashion, which requires exhaustive iterations of tuning and testing, or oversimplifies the problem by ignoring the coupling …

A High -Temperature, High-Voltage, Fast Response Time Linear Regulator In 0.8um Bcd-On-Soi, Chia Hung Su

Doctoral Dissertations

The sale of hybrid electric vehicles (HEVs) has increased tenfold from the year 2001 to 2009 [1]. With this the demand for high temperature electronics has also increased dramatically making, high temperature electronics for HEV applications desirable in the engine compartment, power train, and brakes where the ambient temperature normally exceeds 150°C. Power converters (i.e. DC-DC converter, DC-AC inverter) inside the HEVs require gate drivers to control the power switches. An integrated gate driver circuit has been realized in 0.8-um BCD-on-SOI process. This gate driver IC needs a step-down voltage regulator to convert the unregulated high input DC voltage (VDDH) …

Laser Textured Calcium Phosphate Bio-Ceramic Coatings On Ti-6al-4v For Improved Wettability And Bone Cell Compatibility, Sameer R. Paital

Doctoral Dissertations

The interaction at the surfaces of load bearing implant biomaterials with tissues and physiological fluids is an area of crucial importance to all kinds of medical technologies. To achieve the best clinical outcome and restore the function of the diseased tissue, several surface engineering strategies have been discussed by scientific community throughout the world. In the current work, we are focusing on one such technique based on laser surface engineering to achieve the appropriate surface morphology and surface chemistry. Here by using a pulsed and continuous wave laser direct melting techniques we synthesize three dimensional textured surfaces of calcium phosphate …

Deformation Study Of Nanocrystalline Ni-Fe Alloy Using Synchrotron Diffraction, Li Li

Doctoral Dissertations

This dissertation addresses two critical issues in the deformation of nc metals and alloys: (1) A stress-induced genuine grain growth after the plastic deformation rather than just a change of the grain shape; (2) A systematically quantitative study of micrsostructural evolution during the plastic deformation.

These two critical issues point to the deformation of nc materials with the average-grain sizes within the range of 10 to 50 nm, which is the most interesting and controversial region in the current time. The current study provides a systematic and detailed microstructural evolution for this region, which is definitely beneficial for the investigation …

Mitigation Of Chloride And Sulfate Based Corrosion In Reinforced Concrete Via Electrokinetic Nanoparticle Treatment, Kunal Kupwade-Patil

Doctoral Dissertations

Concrete is a porous material which is susceptible to the migration of highly deleterious species such as chlorides and sulfates. Various external sources, including sea salt spray, direct seawater wetting, deicing salts and chlorides can contaminate reinforced concrete. Chlorides diffuse into the capillary pores of concrete and come into contact with the reinforcement. When chloride concentration at the reinforcement exceeds a threshold level it breaks down the passive oxide layer, leading to chloride induced corrosion. The application of electrokinetics using positively charged nanoparticles for corrosion protection in reinforced concrete structures is an emerging technology. This technique involves the principle of …

Modeling And Its Numerical Method For Micro-Scaled Diffusion -Reaction Systems In The Neuromuscular Junction, Abdul Khaliq

Doctoral Dissertations

The main subject of this research is the neuromuscular junction (NMJ). The NMJ is a biological structure composed of the interface between a neuron and a muscle cell. Currently, there is not a fully three dimensional model of diffusion-reaction processes occurring in the NMJ. Developing a useful predictive model of this structure will assist in the therapeutic efforts to restore and rehabilitate NMJ function to humans and in developing strategies to prevent damage to the NMJ. This research work developed 1D mass transport and full 3D reaction diffusion models. A new finite difference scheme is presented for solving 1D mass …

In Vivo Non-Invasive Monitoring Of Optically Resonant Metal Nanoparticles Using Multi-Wavelength Photoplethysmography, Gregory J. Michalak

Doctoral Dissertations

Nanotechnology has recently emerged as a powerful modality in many biomedical applications. In particular, several classes of nanoparticles have been employed as cancer therapy and imaging contrast agents. These particles can have architecture of varying complexity, depending on their specific application. These complex architectures are achieved by various chemical techniques usually performed in specific sequences to add complexity and functionality. One such class of nanoparticle, used in tumor treatment and as contrast agents in several optical imaging techniques, is the plasmon resonant metal nanoparticle. The most common metal used for these particles is gold because of its biocompatibility, lack of …

Elimination Of Deck Joints Using A Corrosion Resistant Frp Approach, Ashok Reddy Aleti

Doctoral Dissertations

The research presented herein describes the development of durable link slabs for jointless bridge decks based on using FRP grid for reinforcement. Specifically, the ductility of the FRP material was utilized to accommodate bridge deck deformations imposed by girder deflection, temperature variations, and concrete shrinkage. It would also provide a solution to a number of deterioration problems associated with bridge deck joints.

The design concept of the link slabs was then examined to form the basis of design for FRP grid link slabs. Improved design of FRP grid link slab/concrete deck slab interface was confirmed in the numerical analysis. The …