Engineering Commons^™

Preparative Synthesis Of Dtdp-L-Rhamnose Through Combined Enzymatic Pathways, Young Bok Abraham Kang, Yung-Hun Yang, Kwang-Won Lee, Sun-Gu Lee, Jae Kyung Sohng, Hei Chan Lee, Kwangkyoung Liou, Byung-Gee Kim

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

dTDP-L-rhamnose, an important precursor of O-antigen, was prepared on a large scale from dTMP by executing an one-pot reaction in which six enzymes are involved. Two enzymes, dTDP-4-keto-6-deoxy-D-glucose 3,5-epimerase and dTDP-4-keto-rhamnose reductase, responsible for the conversion of dTDP-4-keto-6-deoxy- D-glucose to dTDP-L-rhamnose, were isolated from their putative sequences in the genome of Mesorhizobium loti, functionally expressed in Escherichia coli, and their enzymatic activities were identified. The two enzymes were combined with an enzymatic process for dTDP-4- keto-6-deoxy-D-glucose involving TMP kinase, acetate kinase, dTDP-glucose synthase, and dTDP-glucose 4,6- dehydratase, which allowed us to achieve a preparative scale synthesis of dTDP-L-rhamnose using dTMP …

Analysis Of Indentation Loading Of Cortical Bone Using Acoustic Emission Techniques, Ashkan Safari, Ger Reilly, Brendan Mccormack

Conference Papers

In this study, we recorded the number of Acoustic emission (AE) hits and related AE energy during indentation fracture of cortical bone using a PAC PCI-2 card and pico sensor. A threshold value of 43dB was used to filter premature trigger due to background noise. Registered AE hits had more than one count (threshold crossing). Amplifier gain was set at 40dB with a (0.1-1) MHz band pass filter. 8mm cubes of cortical bones were indented in the longitudinal direction at constant crosshead speed of 1 mm min-1 using a large 2D, 50˚ wedge indenter. We hypothesised that signals occurring as …

Modification And Evaluation Of Continuous Roll Prediction Model For Front Drive Mowers, Xinyan Wang

Doctoral Dissertations

The recently approved ASAE Standard S547 “Tip-Over Protective Structure (TOPS) for Front Wheel Drive Turf and Landscape Equipment” addressed a continuous roll prediction model for Roll-Over Protective Structure (ROPS) design. The existing model described in this Standard did not take into account the influence of the mower deck on the rollover behavior. In order to evaluate the accuracy of the original model, according to the ASAE S547 requirement, a 4.05 meters long and 3.42 meters wide slope of 35 degrees was constructed at the University of Tennessee. Lateral upset tests for Deere F925 front drive mower with regular and inverted …

Bayer Ag V. Housey Pharmaceuticals: Protection For Biotechnological Research Tools Under Section 271(G) Found Wanting, Matthew Barthalow

The University of New Hampshire Law Review

[Excerpt] "Research tools, a subset of biotechnological inventions protected by process patents, are “tools that scientists use in the laboratory, including cell lines, monoclonal antibodies, reagents, animal models, growth factors, combinatorial chemistry and DNA libraries, clones and cloning tools (such as PCR), methods, laboratory equipment and machines.” Many companies base their business models on the ability to find pharmaceutical products using their proprietary drug discovery research tools. Research tools used for drug discovery ‘include bioinformatic methods for identifying the interaction of certain proteins and their association with disease, methods for confirming protein targets, screening assays to identify molecules active against …

Quantitative Elucidation Of A Distinct Spatial Gradient-Sensing Mechanism In Fibroblasts, Ian C. Schneider, Jason M. Haugh

Ian C. Schneider

Migration of eukaryotic cells toward a chemoattractant often relies on their ability to distinguish receptor-mediated signaling at different subcellular locations, a phenomenon known as spatial sensing. A prominent example that is seen during wound healing is fibroblast migration in platelet-derived growth factor (PDGF) gradients. As in the well-characterized chemotactic cells Dictyostelium discoideum and neutrophils, signaling to the cytoskeleton via the phosphoinositide 3-kinase pathway in fibroblasts is spatially polarized by a PDGF gradient; however, the sensitivity of this process and how it is regulated are unknown. Through a quantitative analysis of mathematical models and live cell total internal reflection fluorescence microscopy …

Characterization Of Gdp-Mannose Pyrophosphorylase From Escherichia Coli O157:H7 Edl933 And Its Broad Substrate Specificity, Yung-Hun Yang, Young Bok (Abraham) Kang, Kwang-Won Lee, Tek-Hyung Lee, Sung-Soo Park, Bum-Yeol Hwang, Byung-Gee Kim

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

GDP-mannose pyrophosphorylase gene (ManC) of Escherichia coli (E. coli) O157 was cloned and expressed as a highly soluble protein in E. coli BL21 (DE3). The enzyme was subsequently purified using hydrophobic and ion exchange chromatographies. ManC showed very broad substrate specificities for four nucleotides and various hexose-1-phosphates, yielding ADP-mannose, CDP-mannose, UDP-mannose, GDP-mannose, GDP-glucose and GDP-2-deoxy-glucose.

Remapping Hand Movements In A Novel Geometrical Environment, Kristine M. Mosier, Robert A. Scheidt, Santiago Acosta, Ferdinando A. Mussa-Ivaldi

Biomedical Engineering Faculty Research and Publications

The issue of how the Euclidean properties of space are represented in the nervous system is a main focus in the study of visual perception, but is equally relevant to motor learning. The goal of our experiments was to investigate how the properties of space guide the remapping of motor coordination. Subjects wore an instrumented data glove that recorded the finger motions. Signals generated by the glove operated a remotely controlled endpoint: a cursor on a computer monitor. The subjects were instructed to execute movements of this endpoint with controlled motions of the fingers. This required inverting a highly redundant …

Ricketts And Steiner Analysis Using Newtom 3g™ Scout Images, James I. Gibson Iii

Loma Linda University Electronic Theses, Dissertations & Projects

NewTom 3G™ scout images have the general appearance of traditional lateral cephalometric radiographs. The purpose of this research was to determine if Ricketts and Steiner analyses could be accomplished on NewTom 3G™ scout images.

This was a retrospective study comparing the use of NewTom 3G™ scans in DICOM (Digital Imaging and Communications in Medicine) format to scout images from 25 consecutive patients of the Loma Linda University School of Dentistry Department of Orthodontics, three of these patients did not meet the inclusion criteria. The DICOM images were used to create controls. The controls and scout images were digitized using QuickCeph™. …

Dynamic Determinants Of Incisal Display, Shawn Paul Pesh

Loma Linda University Electronic Theses, Dissertations & Projects

The principal objective of this study was to use computer aided design (CAD) to better illustrate and quantify the relationship of mandibular arch depth, mandibular arch width, overbite, and overjet in the presence of mandibular dental crowding. To date, there has been no research examining how changes in the mandibular arch limit the orthodontist's ability to control overbite and overjet. Understanding how to effectively manage overbite and overjet are crucial to the clinician's ability to manipulate incisal display. Polyvinyl siloxane impressions of both maxillary and mandibular arches of a Caucasian patient were taken and used to pour dental stone models. …

Genetic Engineering Of Plants Through Manipulation Of Lignin Biosynthesis, Vincent Lee C. Chiang, Chung-Jui Tsai, Wen-Jing Hu

Michigan Tech Patents

The invention pertains to the genetically down regulating a lignin pathway p-coumarate Co-enzyme A ligase (CCL) in trees.

Investigation Of The Electro-Mechanical Properties Of A Carbon Fiber-Sodium Composite Material For The Purpose Of Structural Health Monitoring, Sharon Austin

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science in Industrial Technology by Sharon Austin on November 15, 2005.

Effect Of Blood Flow Patterns On Localized Platelet Adhesion Under Physiologic Flow Conditions Using Two-Dimensional And Three-Dimensional Stent Models - An Experimental And Computational Approach, Nandini Duraiswamy

FIU Electronic Theses and Dissertations

This dissertation presents dynamic flow experiments with fluorescently labeled platelets to allow for spatial observation of wall attachrent in inter-strut spacings, to investigate their relationship to flow patterns. Human blood with fluorescently labeled platelets was circulated through an in vitro system that produced physiologic pulsatile flow in (1) a parallel plate flow chamber that contained two-dimensional (2D) stents that feature completely recirculating flow, partially recirculating flow, and completely reattached flow, and (2) a three-dimensional (3D) cylindrical tube that contained stents of various geometric designs.

Flow detachment and reattachment points exhibited very low platelet deposition. Platelet deposition was very low in …

Manure Use Planning Tools For Nebraska, Charles S. Wortmann, Charles A. Shapiro, Richard K. Koelsch, Richard Deloughery

Department of Biological Systems Engineering: Conference Presentations and White Papers

Three computer programs have been developed to facilitate manure use planning. The Nebraska Manure Value Calculator was developed in Excel to ease the calculation of manure value (www.cnmp.unl.edu) for a specific field giving value to needed nutrients and other expected benefits, and with the option of giving value to manure nutrients used in the more distant future. Nebraska MMPAMUP and MMP-CNMP Document Generators are planning tools for animal feeding operations that work with the Purdue University Manure Management Planner (MMP). Microsoft Word documents are generated which contain some boilerplate text that can be edited, popup lists in Word AutoText to …

Are We Addressing The Cause Of Nutrient Problems?, Richard K. Koelsch

Department of Biological Systems Engineering: Conference Presentations and White Papers

Content:

Manure P vs. Crop Land P Use

One-Way Flow of Nutrients Is Underlying Cause

Future NMP Checklist?

Should an NMP Measure Environmental Performance?

Whole Farm Nutrient Balance

Whole Farm N Balance

Phosphorus Inputs to Livestock Systems

Should An NMP Estimate Ammonia Emissions?

Daily Ammonia Emissions from Livestock (36 km grid)

Ammonia Emissions Regulatory Thresholds

Ammonia Emissions – Swine Finishing Operations

In Vitro And In Vivo Two-Photon Luminescence Imaging Of Single Gold Nanorods, Haifeng Weng, Terry B. Huff, Daniel A. Zweifel, Wei He, Philip S. Low, Alexander Wei, Ji-Xin Cheng

Other Nanotechnology Publications

Gold nanorods excited at 830 nm on a far-field laser-scanning microscope produced strong two-photon luminescence (TPL) intensities, with a cos(4) dependence on the incident polarization. The TPL excitation spectrum can be superimposed onto the longitudinal plasmon band, indicating a plasmon-enhanced two-photon absorption cross section. The TPL signal from a single nanorod is 58 times that of the two-photon fluorescence signal from a single rhodamine molecule. The application of gold nanorods as TPL imaging agents is demonstrated by in vivo imaging of single nanorods flowing in mouse ear blood vessels.

Effect Of Chronic Hyperoxic Exposure On Duroquinone Reduction In Adult Rat Lungs, Said H. Audi, Robert D. Bongard, Gary S. Krenz, David A. Rickaby, Steven Thomas Haworth, Jessica Eisenhauer, David L. Roerig, Marilyn P. Merker

Biomedical Engineering Faculty Research and Publications

NAD(P)H:quinone oxidoreductase 1 (NQO1) plays a dominant role in the reduction of the quinone compound 2,3,5,6-tetramethyl-1,4-benzoquinone (duroquinone, DQ) to durohydroquinone (DQH₂) on passage through the rat lung. Exposure of adult rats to 85% O₂ for ≥7 days stimulates adaptation to the otherwise lethal effects of >95% O₂. The objective of this study was to examine whether exposure of adult rats to hyperoxia affected lung NQO1 activity as measured by the rate of DQ reduction on passage through the lung. We measured DQH₂ appearance in the venous effluent during DQ infusion at different concentrations into …

Engineering Substrate-Mediated Gene Delivery With Self-Assembled Monolayers, Angela K. Pannier, Lonnie D Shea

Department of Biological Systems Engineering: Conference Presentations and White Papers

Gene transfer has many potential applications in basic and applied sciences, including functional genomics, gene therapy, and tissue engineering. Substrate- mediated delivery, also termed solid phase delivery, describes the immobilization of DNA, complexed with nonviral vectors, to a biomaterial or substrate that supports cell adhesion. A critical component to this process is designing the appropriate interactions between the DNA complexes and substrate. The objective of this study was to investigate gene transfer as a function of i) complex formation and deposition conditions and ii) non-specific and specific binding interactions between the complexes and substrate. The volume and time of complex …

A Three-Dimensional Reconstruction Algorithm For An Inverse-Geometry Volumetric Ct System, Taly Gilat Schmidt, Rebecca Fahrig, Norbert J. Pelc

Biomedical Engineering Faculty Research and Publications

An inverse-geometry volumetric computed tomography (IGCT) system has been proposed capable of rapidly acquiring sufficient data to reconstruct a thick volume in one circular scan. The system uses a large-area scanned source opposite a smaller detector. The source and detector have the same extent in the axial, or slice, direction, thus providing sufficient volumetric sampling and avoiding cone-beam artifacts. This paper describes a reconstruction algorithm for the IGCT system. The algorithm first rebins the acquired data into two-dimensional (2D) parallel-ray projections at multiple tilt and azimuthal angles, followed by a 3D filtered backprojection. The rebinning step is performed by gridding …

Where’S The Poop? Environmental Challenges For Large And Small Animal Feeding Operations, Richard K. Koelsch, John Lawrence

Department of Biological Systems Engineering: Conference Presentations and White Papers

Content:

Where’s the Poop?

Status and Trends in Small and Mid-Sized Animal Operations in the U.S.

Numbers of farms, animals, & nutrients

Non-confined animals: Farms and AU

Confined animals: Farms and AU

Confined animals: Manure nutrients

Confined animals: Farms with excess manure

AFO Challenges

Bang-for-the-Buck Programming

Bme Annual Report 2004-2005, Department Of Biomedical Engineering, Florida International University

Biomedical Engineering Department Annual Reports

No abstract provided.

Wavelet Based Feature Extraction And Dimension Reduction For The Classification Of Human Cardiac Electrogram Depolarization Waveforms, Christopher S. De Voir

Dissertations and Theses

An essential task for a pacemaker or implantable defibrillator is the accurate identification of rhythm categories so that the correct electrotherapy can be administered. Because some rhythms cause a rapid dangerous drop in cardiac output, it is necessary to categorize depolarization waveforms on a beat-to-beat basis to accomplish rhythm classification as rapidly as possible. In this thesis, a depolarization waveform classifier based on the Lifting Line Wavelet Transform is described. It overcomes problems in existing rate-based event classifiers; namely, (1) they are insensitive to the conduction path of the heart rhythm and (2) they are not robust to pseudo-events. The …

Bme Stats Fall 2005, Deparment Of Biomedical Engineering, Florida International Univeristy

STATS

No abstract provided.

The Igipi Ontological Framework: Integrating Gene Interactions With Protein Interactions, Bill Andreopoulos, Aijun An, Xiangji Huang

Faculty Publications, Computer Science

No abstract provided.

Optimal Control Theory Applied To A Difference Equation Model Of Cardiopulmonary Resuscitation, Eunok Jung, Charles F. Babbs, Suzanne Lenhart, Vladimir A. Protopoescu

Weldon School of Biomedical Engineering Faculty Publications

Objective: To apply the mathematical techniques of optimal control theory (OCT) to a validated model of the human circulation during cardiopulmonary resuscitation (CPR), so as to discover improved waveforms for chest compression and decompression that maximize the systemic perfusion pressure (SPP). Methods: The human circulatory system is represented by seven difference equations, which describe the pressure changes in systemic vascular compartments caused by chest compression. The forcing term is the intrathoracic pressure generated by the external chest compression, which is taken as the “control” variable for the system. The optimum waveform of this forcing pressure as a function of time, …

A Dose-Response Curve For The Negative Bias Pressure Of An Intrathoracic Pressure Regulator During Cpr, Charles F. Babbs, Demetris Yannopoulos

Weldon School of Biomedical Engineering Faculty Publications

An intrathoracic pressure regulator (ITPR) is a device that can be added to the external end of an endotracheal tube to create controlled negative airway pressure between positive pressure ventilations. The resulting downward bias of the airway pressure baseline promotes increased venous return and enhanced circulation during CPR and also during hypovolemic shock. In the present study we exercised a mathematical model of the human cardiopulmonary system, including airways, lungs, a 4 chambered heart, great vessels, peripheral vascular beds, and the biomechanics of chest compression and recoil, to determine the relationship between systemic perfusion pressure during CPR and the value …

Intravenous Polyethylene Glycol Inhibits The Loss Of Cerebral Cells After Brain Injury, Andrew O. Koob, Bradley S. Duerstock, Charles F. Babbs, Yinlong Sun, Richard B. Borgens

Weldon School of Biomedical Engineering Faculty Publications

We have tested the effectiveness of polyethylene glycol (PEG) to restore the integrity of neuronal membranes after mechanical damage secondary to severe traumatic brain injury (TBI) produced by a standardized head injury model in rats. We provide additional detail on the standardization of this model, particularly the use and storage of foam bedding that serves to both support the animal during the impact procedure and to dampen the acceleration of the brass weight. Further, we employed a dye exclusion technique using ethidium bromide (EB; quantitative evaluation) and horseradish peroxidase (HRP; qualitative evaluation). Both have been successfully used previously to evaluate …

Integration Of Micro Nano And Bio Technologies With Layer -By -Layer Self -Assembly, Dinesh Shankar Kommireddy

Doctoral Dissertations

In the past decade, layer-by-layer (LbL) nanoassembly has been used as a tool for immobilization and surface modification of materials with applications in biology and physical sciences. Often, in such applications, LbL assembly is integrated with various techniques to form functional surface coatings and immobilized matrices. In this work, integration of LbL with microfabrication and microfluidics, and tissue engineering are explored. In an effort to integrate microfabrication with LbL nanoassembly, microchannels were fabricated using soft-lithography and the surface of these channels was used for the immobilization of materials using LbL and laminar flow patterning. Synthesis of poly(dimethyldiallyl ammonium chloride)/poly(styrene sulfonate) …

Application Of Polyelectrolyte Layer-By-Layer Nano-Assembly For Surface Modification, Encapsulation And Controlled Release, Nikhil Anil Pargaonkar

Doctoral Dissertations

In this study, we applied the traditional Electrostatic layer-by-layer (ELBL) assembly procedure to fabricate nanothin films over flat surfaces, and modify particle surfaces to influence the drug particle size, and drug release. The ELBL assembly has previously been applied to fabricate multilayer nano-scale thin films, but its ability to instantaneously influencing particle size is unique. Other unique observations such as influence on drug release as a result of polymer complexation, and thermal changes occurring during layer fabrication are recorded.

The ELBL self-assembly process was applied to produce dexamethasone particles layered with various polyelectrolyte layer combinations. These combinations were further applied …

Axial Stent Strut Angle Influences Wall Shear Stress After Stent Implantation: Analysis Using 3d Computational Fluid Dynamics Models Of Stent Foreshortening, John F. Ladisa, Lars E. Olson, Douglas Anthony Hettrick, David C. Warltier, Judy R. Kersten, Paul S. Pagel

Biomedical Engineering Faculty Research and Publications

Introduction

The success of vascular stents in the restoration of blood flow is limited by restenosis. Recent data generated from computational fluid dynamics (CFD) models suggest that the vascular geometry created by an implanted stent causes local alterations in wall shear stress (WSS) that are associated with neointimal hyperplasia (NH). Foreshortening is a potential limitation of stent design that may affect stent performance and the rate of restenosis. The angle created between axially aligned stent struts and the principal direction of blood flow varies with the degree to which the stent foreshortens after implantation.

Methods

In the current investigation, we …

Validation Of Lower Limb Surrogates As Injury Assessment Tools In Floor Impacts Due To Anti-Vehicular Landmine Explosions, Ana Barbir

Wayne State University Theses

The aim of this study is to assess the ability of lower limb surrogates to predict injury due to floor impact in military vehicles during anti-vehicular (AV) landmine explosions. Most such surrogates have originally been constructed for use in automotive crash applications, where footwell intrusion is the main source of lower limb injury. Land mine explosions, however, create different loading conditions on the lower leg. Comparatively, the peak loads are higher but the durations are shorter and the loading occurs axially through the tibia, instead of the axial loading combined with foot rotation that is often observed in automotive applications. …