Engineering Commons^™

Влияние На Окружающую Среду Технологии Непрерывного Литья, Marian Mazur, Marek Bogacki, Robert Oleniacz, Agnieszka Łopata

Robert Oleniacz

This article presents a complex analysis of the impact of the technology of continuous casting of steel (CCS) on the rate of the air pollutant emissions from one of the Polish steel and iron plants. The emission sources occurring in the production process have been identified and their rate has been determined. The implementation of CCS has brought about significant changes in the production cycle of the steel plant and it also has caused an increase of the production effectiveness of steel products. The calculated environment effects have shown a considerable emission decrease of all pollutants in the scale of …

Preliminary Report On December 22, 2003 San Simeon Earthquake, Rakesh K. Goel

Civil and Environmental Engineering

A strong earthquake of magnitude 6.5 ( M_w) struck the Central Coast of California at 11:15:56 AM PST (19:15:56 UTC) on Monday, December 22, 2003. The epicenter (Figure 1) was 11 km (7 mile) NE of San Simeon, at a depth of about 8 km (5 mile). Two people were killed and about 40 buildings collapsed or severely damaged at Paso Robles which is located about 39 km (24 mile) from the epicenter. At least 40 people were reported to be injured in the Paso Robles-Templeton area. This preliminary report presents basic information on the epicenter location, intensity …

Cost Comparison Of Straddle Carrier Direct And Relay Systems In Container Terminals, Wen-Chih Huang, Chin-Yuan Chu

Journal of Marine Science and Technology

The main characteristics of straddle carrier direct system and straddle carrier relay system are stated and factors affecting the economics of this two handling systems are also studied. A cost function model is proposed to make the comparison. It includes land cost, equipment cost, transportation cost between quayside and storage yard, annual throughput, handling efficiency, labor cost and their constituent factors. A "handling cost comparison indicator" (RD) is also submitted to determine the preferred system. For RD > 1 scenario, straddle carrier direct system is preferred, and on the contrary, straddle carrier relay system is preferred, if RD < 1.

A Novel Approach To Determine The Astronomical Vessel Position, Chih-Li Chen, Tien-Pen Hsu, Jiang-Ren Chang

Journal of Marine Science and Technology

In this paper, a novel approach based on the trigonometric equation solving technique is developed to solve the classical problem of celestial navigation. It is shown that this approach, namely, the simultaneous equal-altitude equations method (SEEM), can directly calculate the astronomical vessel position (AVP) without an additional graphical procedure. It is also found that the SEEM is not only simpler than the matrix method but is also more straightforward as compared with the spherical triangle method. In addition, aimed at the drawbacks of the intercept method, an improved approach with the new computation procedure is presented to plot the celestial …

C-Ring Strength Of Advanced Monolithic Ceramics, A. A. Wereszczak, R. J. Caspe, J. J. Swab, S. F. Duffy, E. H. Baker

Civil and Environmental Engineering Faculty Publications

Alumina, silicon carbide, silicon nitride, and zirconia are common candidate ceramics for load-bearing tubular components. To help facilitate design and reliability modeling with each ceramic, Weibull strength distributions were determined with each material using a diametrally compressed c-ring specimen in accordance with ASTM C1323. The investigated silicon nitride and zirconia were found to exhibit higher uncensored characteristic strengths than the alumina and silicon carbide. The occurrence of chamfer-located fracture initiation was problematic, and hindered the ability to generate valid design data in some of these ceramics. Fractography and stress modeling results suggest that some aspects of ASTM C1323 should be …

Identification Of The First Limiting Amino Acid In Cooked Polished White Rice Fed To Weanling Holtzman Rats, Mellova Masrizal, J. B. Lamb

Makara Journal of Technology

Forty-eight male weanling rats (91 g) were utilized to study the nutritional adequacy of cooked polished white rice. Rats were individually housed, and allowed ad libitum access to one of six treatment diets. Treatment diets were 1) polished white rice plus 10% casein and 0.18% methionine, CAS, 2) polished white rice, WHR, 3) polished white rice plus 0.45% lysine, LYS, 4) polished white rice plus0.40% methionine, MET, 5) polished white rice plus 0.30% threonine, THR, 6) polished white rice plus 0.45% lysine, 0.40% methionine, and 0.40% threonine, COM. Rice was cooked prior diet formulation using a 3 to 1 ratio …

Adoption Of Variable Rate Technology, Isti Surjandari, Marvin T. Batte

Makara Journal of Technology

Site Specific Management (SSM), which also variously referred to as Variable Rate Technology (VRT), is an emerging technology that enables producers to make more precise input application decisions based on soil and field characteristics. This study analyzes factors influencing the adoption of VRT for fertilizer application for cash grain production in Ohio. Results show that producer and field characteristics might influence the adoption decision on various SSM components differently. It also provides insight as to the sequence of adoption of SSM component technologies and how this sequence might differ for producers of differing characteristics.

An Economic Analysis Of Variable Rate Technology, Isti Surjandari, Marvin T. Batte, Mario J. Miranda

Makara Journal of Technology

Variable Rate Technology (VRT) offers an opportunity to improve production efficiency by allowing input applications to fluctuate in response to spatial variations in soil characteristics and nutrient levels. Society may also benefit from reduced negative externalities, such as surface and groundwater contamination, from input applications. Using a dynamic spatial model, this study examines how the interaction among variability, spatial autocorrelation, and mean level of soil fertility affects optimal sampling density and the economic gains from VRT. VRT was found to be profitable under selected conditions, and the optimal grid size will vary with these conditions. In the case where variability …

Alum And Pacl Coagulation, Winarni Winarni

Makara Journal of Technology

Alum and PACl Coagulation. Coagulation occurs by interaction of aluminum hydrolysis products with the contaminant such as colloidal particles. It is necessary to consider the different aluminum species that may present during specific conditions, since the mechanism of turbidity removal is dependent upon them. PACl consists of preformed aluminum hydrolysis products, which are stable below pH 6 and less sensitive than in situ hydrolysis product, alum. The benefits of PACl relative to alum have been investigated as a function of pH and Al dosages. Specific conditions and aluminum species that exist during the certain mechanisms of coagulation are discussed. Results …

Study On Electrochromic Effect Of Polyaniline Film, Lienda Handojo, Junus Simangunsong

Makara Journal of Technology

Study on Electrochromic Effect of Polyaniline Film. The light transmission factor of an electrochromic film changes reversibly with the application of an electrical voltage. Thereby the transparent film becomes reversibly opaque so that it may be used to control light transmission. In this paper the results of a study on polyaniline film as an electrochromic active material is reported. Polyaniline looks yellow transparent in the reduced state and turns to green-blue at its oxidized state. The electrochromic device considered in this paper was fabricated in planar configuration of ITO glass − polyaniline film − electrolyte − ITO glass which involved …

Application Of Tabu Search Algorithm In Job Shop Scheduling, Betrianis Betrianis, Putu Teguh Aryawan

Makara Journal of Technology

Application of Tabu Search Algorithm in Job Shop Scheduling. Tabu Search is one of local search methods which is used to solve the combinatorial optimization problem. This method aimed is to make the searching process of the best solution in a complex combinatorial optimization problem(np hard), ex : job shop scheduling problem, became more effective, in a less computational time but with no guarantee to optimum solution.In this paper, tabu search is used to solve the job shop scheduling problem consists of 3 (three) cases, which is ordering package of September, October and November with objective of minimizing makespan (Cmax). …

Role Of K3-Xhxpw12o40 As A Catalyst In Selective Catalysis Of Methylamine Synthesis From Ammonia And Methanol, Mohammad Nasikin

Makara Journal of Technology

Role of K3-xHxPW12O40 as a Catalyst in Selective Catalysis of Methylamine Synthesis from Ammonia and Methanol. Synthesize of methylamine from methanol and ammonia was studied in this research work using a partially potassium heteropoly salt (K3-xHxPW12O40 abbreviated as KPW) as a catalyst. KPW was prepared from heteropoly salt and potassium carbonate by using ion exchange method. The reaction was conducted at 600 ~ 800K and at the atmospheric pressure. Reactor used was a continue flow reactor with W/F=0,1~0,9g-kat.mnt./cc.Concentration of reactants and products were analyzed by gas chromathography while catalyst structure was observed by XRD (X-ray diffraction). Isothermal adsorption method was …

The Selection Of Materials For Roller Chains From The Perspective Of Manufacturing Process, Rahmat Saptono

Makara Journal of Technology

The selection of materials for an engineering component is not only requested by its design function and shape, but also the sequence through which it is manufactured. The manufacturing operation of roller chains involves drawing and trimming processes aimed at producing semi-finished chain drives component with a well-standardized dimension. In addition to final combination of properties required by design constraints, the ability of materials to be formed into a desired shape and geometry without failure is also critical. The objective of materials selection should therefore involve additional attributes that are not typically accommodated by the standard procedure of materials selection. …

Transportation Shortest Path Search Area Model, Hui Wang

Doctoral Dissertations

Although many studies on shortest-path algorithms have been conducted in the past, few of them have considered the time and effort required to obtain and update the weight property of the network arcs. For transportation-related problems – due to the size and complexity of the network – preparing, updating, and transmitting the network database on which the shortest-path algorithms perform can be a challenge.

This study designed a Transportation Shortest Path Search Area (TSPSA) model to enhance the database preparation and updating step before any shortest-path search algorithm can start processing. Taking advantage of the characteristics of the transportation networks, …

Bs News

Building Services Engineering

No abstract provided.

Comparison Of Microbial Cell Densities And Treatment Performance In Nitrifying Activated Sludge Reactors, Janalyn Rae Brown

Masters Theses

A thorough understanding of microbial dynamics in activated sludge treatment is currently unrealized due, in part, to quantitative techniques that rely on culture-dependent methods. The bias inherent with cultivation techniques may result in isolates that do not necessarily represent those dominant in the system evaluated. In situ analysis of microorganisms functioning in wastewater reactors will provide a greater understanding of how particular groups of organisms, such as nitrifiers, are impacted by system fluctuations. This information is vital for improved process design and control. The overall goal of this research was to investigate the use of the real-time polymerase chain reaction …

The Effects Of Temperature And Solids Retention Time On Activated Sludge Treatment Performance, Jack Mcclendon Carley

Masters Theses

A bench-scale treatment system with external clarifier was used to determine the effects of solids retention time (SRT) and temperature on treatment performance while simulating the full scale activated sludge process. Four bench-scale reactors, operating at SRTs of 20, 10, 5 and 2 days, were fed settled municipal wastewater collected after primary clarification from the Kuwahee wastewater treatment plant in Knoxville, TN. Three operational temperatures were investigated during this study, 22oC, 12oC and 7oC. The order and duration of operation at each temperature was first 22oC for 61 days, next 7oC for 47 days and lastly 12oC for 105 days. …

Innovative Contracting Prequalification/Selecion Model Using Analytical Hierarchy Process (Ahp), Saad J. Zidan

Masters Theses

Design-Build, Cost-Plus-Time, and warranty are the three innovative contracting methods that the Federal Highway Administration (FHWA) decided to fund. FHWA allowed the usage of these methods in federally funded projects if this will result in reducing time, improving quality, and saving tax payers' money. Prequalification is recognized as the best way of assuring that contractors do have the required qualifications to deliver projects successfully. Prequalification is even more critical when low-bid selection method is used with any of the innovative contracting, since incompetent contractors may get awarded for low-bids that are not based on valid assumptions.

This study presents a …

Color Management Of Desktop Input Devices: Quantitative Analysis Of Profile Quality, Xiaoying Rong

Masters Theses

This thesis investigates the color management principle and input device profiling. The input devices discussed in this thesis are flatbed scanners.

In this thesis, the human visual system, CIE L*a*b* color space, ICC profiles are reviewed, and the evaluation of profile quality is discussed. Grayscale and standard color targets of three primary suppliers are used to create profiles for a scanner. The quantitative analyses of the quality of different profiles, created by two primary commercial profiling software, are conducted according to the Delta-E of the CIE L*a*b* color space. Finally, the relationship of different color targets and profiles for desktop …

Deceleration Lanes Of Left-Turn Bays Of Four-Lane Expressways, Karen Schurr, Patrick T. Mccoy, Geza Pesti, Anthonny Egelhoff, Rebecca Burdick

Nebraska Department of Transportation: Research Reports

No abstract provided.

Fiscal Year 2003 Fhwa-536 Report For The Kentucky Transportation Cabinet, Steven Douglas Kreis

Kentucky Transportation Center Research Report

The Federal Highway Administration (FHWA) requires state transportation agencies to submit a biennial report on local highway finances. The purpose of these reports is to provide FHWA with the data it needs to capture the financing of highway activities at the local level. Based on this information, it can identify trends in revenue, expenditures, investments, and program development, and in turn make decisions about future investments. The report, FHWA-536, asks agencies to report on four areas of local highway finance: 1) disposition of highway-user revenues; 2) revenues used for roads and streets identified by source and funding type; 3) road …

Implementation Of The Superstructure/Substructure Joint Details, Maher K. Tadros

Nebraska Department of Transportation: Research Reports

No abstract provided.

Spliced I-Grinder Concrete Bridge System, Maher K. Tadros, Charles J. Vranek

Nebraska Department of Transportation: Research Reports

No abstract provided.

Trust, Collaboration, And Financial Return In Conservation/Development Partnerships, New England Environmental Finance Center

Economics and Finance

In early 2002 the New England Environmental Finance Center hosted a series of roundtable discussions among municipal officials, residential developers, land trust representatives, and others about "Innovative Approaches to Land Conservation and Smart Growth". Among our observations was that for many of the over 20 conservation/development partnerships we discussed in the series, creation and maintenance of trust was central to success or failure of various stages of the partnership. This suggested a link between creation of trust and financial return for traditionally opposed project partners.

To further examine this matter, we interviewed 11 round table participants and asked questions about …

Slides: Untitled [British Petroleum], Rusty Riese

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Dr. Rusty Riese, Consulting Geologist, BP American Production Co.

6 slides

Abstract: For companies doing directional drilling, what are the direct and indirect costs and benefits? When is it economical and what factors does industry take into account in making the decision to utilize directional drilling?

Slides: Untitled [Colorado Attorney General's Office], Carol Harmon

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Carol Harmon, Colorado Attorney General's Office

8 slides

Abstract: When does the State require directional drilling? Can landowners require it in Surface Use Agreements? What does Colorado's version of the accommodation doctrine mean for directional drilling?

Slides: Untitled [Western Resource Advocates], Mike Chiropolos

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Mike Chiropolos, Attorney, Western Resource Advocates

10 slides

Abstract: What are the environmental considerations involved with directional drilling? How should the NEPA analysis take this technology into account? When should it be analyzed as an alternative to conventional vertical drilling?

Notes From The Directional Drilling Workshop, University Of Colorado Boulder. Natural Resources Law Center

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

20 pages

"These notes were taken by one of our law students attending the workshop. They are not a verbatim transcript and they were not supplied by, and may not have been reviewed by, the speakers. There may be errors or gaps in the notes and for these we apologize in advance. Where the speaker provided an abstract of their talk, these are included and noted as such."

Slides: Encana, John Moran

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: John Moran, Reservoir Engineer, Encana Oil & Gas

23 slides

Abstract: For companies doing directional drilling, what are the direct and indirect costs and benefits? When is it economical and what factors does industry take into account in making the decision to utilize directional drilling?

Slides: Directional Drilling: The Promise And The Peril, Alfred W. Eustes Iii

Workshop on Directional Drilling in the Rocky Mountain Region (November 13)

Presenter: Dr. Bill Eustes, Ph.D., P.E., Department of Petroleum Engineering, Colorado School of Mines, Golden, CO

63 slides

Abstract: What is it, where can it be done and how does it fit into full field development for oil and gas? This segment will set the foundation and bring everyone up to a basic level of understanding of the technology of directional drilling.