Engineering Commons^™

Crossover Photonic Switching Network With Cmos/Seed Smart Pixel Device And 2d Optical Fiber Bundle Array, Fengguang Luo, Mingcui Cao, Qiaoyan Hu, Anjun Wan, Jun Xu, Cong Deng, Deming Liu

Electro-Optics and Photonics Faculty Publications

A 16 X 16 Crossover photonic switching network with hybrid integrated CMOS/SEED smart pixel device and 2D optical fiber bundle array I/O access device is reported in this paper. SEEd array devices ar used as light receivers and transmitters, while CMOS devices make efficient logical processing. 4 X 40 2D multilayer optical fiber bundle arrays are fabricated and are used as I/O access devices in the crossover photonic switching network. The center to center spacing between adjacent optical fibers in the same layer of the fiber array is 125micrometers , and the spacing between adjacent layers is 250micrometers . Displacing …

Optoelectronic Switching Network With 2d Optical Fiber Bundle Array I/O Access Device, Fengguang Luo, Mingcui Cao, Qiaoyan Hu, Anjun Wan, Jun Xu, Cong Deng, Yuan-Zhong Xu

Electro-Optics and Photonics Faculty Publications

An optoelectronic switching network with 2-D optical fiber bundle arrays I/O access device is presented in this paper. An optoelectronic recirculating Banyan network based on CMOS/SEED smart pixel device is used in this configuration. Thirty-two X two single-mode fiber bundle array and 32 X 2 multi- mode fiber bundle array are fabricated respectively based on the features of high density, high precision and array permutation of the CMOS/SEED optoelectronic integrated devices. The measuring results show that the center to center spacing between adjacent optical fibers in the same layer of the fiber array is 125 micrometer, and the spacing between …

Guest Editorial: Special Section On Acousto-Optic Devices And Optical Information Processing: Research And Developments, Partha P. Banerjee, Ting-Chung Poon

Electrical and Computer Engineering Faculty Publications

This guest editorial provides an overview of the topical area and an introduction to the articles featured in the special section.

Laser Beam Profile Deformation Effect During Bragg Acousto-Optic Interaction: A Non-Paraxial Approximation, Ray S. Huang, Chen-Wen Tarn, Partha P. Banerjee, Doungchin Cao

Electrical and Computer Engineering Faculty Publications

It is commonly known that the spatial profiles of the diffracted light beams during Bragg acousto-optic interaction are distorted due to the Bragg angle selection mechanism. All the conventional studies on this effect use the paraxial approximation. But this approximation should be amended when the incident angle of the light is large enough that the diffracted light waves do not propagate closely along the optic axis of the acousto-optic diffraction system. By using a spatial Fourier transform approach, we rigorously study the light beam profile deformation effect of the diffracted light during the Bragg acousto-optic interaction beyond the paraxial approximation. …

Examination Of Beam Propagation In Misaligned Holographic Gratings And Comparison With The Acousto-Optic Transfer Function Model For Profiled Beams, Monish Ranjan Chatterjee, David D. Reagan

Electrical and Computer Engineering Faculty Publications

A transfer function formalism developed earlier for the propagation of profiled optical beams through acousto-optic Bragg cells is revisited and applied to a thick holographic grating. The results based on the holographic coupled wave model and the acousto-optic multiple scattering model are shown to be compatible, and equivalent parameters such as the Q and grating strength are defined for the two systems. Results for a Gaussian spatial profile are numerically computed and compared. For the holographic grating, a profiled beam may be interpreted as an angular misalignment or Bragg-angle mismatch problem. The case of Bragg-wavelength mismatch is also investigated for …

Development Of A Curved Layer Lom Process For Monolithic Ceramics And Ceramic Matrix Composites, Donald A. Klosterman, Richard P. Chartoff, Nora R. Osborne, George A. Graves, Allan Lightman, Gyoowan Han, Akos Bezewredi, Stan Rodrigues, Sung Pak, Gary Kalmanovich, Leon Dodin, Song Tu

Chemical and Materials Engineering Faculty Publications

A novel rapid prototyping technology incorporating a curved layer building style was developed. The new process, based on Laminated Object Manufacturing (LOM), was designed for efficient fabrication of curved layer structures made from ceramics and fiber reinforced composites. A new LOM machine was created, referred to as Curved Layer LOM. This new machine uses ceramic tapes and fiber prepregs as feedstocks and fabricates curved structures on a curved-layer by curved-layer basis. The output of the process is a three dimensional "green" ceramic that is capable of being processed to a seamless, fully dense ceramic using traditional techniques. A detailed description …

Electro-Hydrodynamic Pumped Hydraulic Actuation With Application To Active Vibration Control, Ahmad Reza Kashani, Sung Kang, Kevin P. Hallinan

Mechanical and Aerospace Engineering Faculty Publications

A new type of actuation device has been conceptualized that meets the needs of both large displacement, force and bandwidth within a package more compact than currently available magnetostrictive and stack-type piezoelectric actuators of similar rating. This concept relies on micro-scale electrohydrodynamic (EHD) pumping of a dielectric liquid within small channels. Configured as an actuator, the EHD pump(s) would be used to move fluid between two reservoirs—each having a compliant membrane that interfaces to the world to provide the means to achieve vibration cancellation or micro actuation.

Ordinarily limited to generating flow in macroscale applications, the EHD pump, when operating …