Engineering Commons^™

A Proposed Approach To Iso Compliance And Validation For Metrology Laboratories, J. Lyle Bagley

Engineering Management & Systems Engineering Theses & Dissertations

International competition among metrology laboratories, as well as their customers, has intensified the incentive to seek either accreditation to ISO Guide 25 or ISO 9000 quality system registration for the laboratory. The debate continues as to which is more beneficial to the laboratory and its customers once the decision is made to pursue one or the other. This study addresses the advantages and limitations of each, and how best to prepare for complying with ISO standards. The literature was reviewed and ISO certification experts were questioned about these issues. The results were combined with new applications of existing operations research …

Minimizing Post-Production Weight Growth In Tanks Using A Decision Analysis Model, Michael F. Cochrane

Engineering Management & Systems Engineering Theses & Dissertations

Post-production weight growth of tanks is an historic problem for the military. Tanks are difficult to transport because of their weight, and post-production modifications tend to cause this weight to increase over the lifecycle of the tank. In this thesis, a computer model is constructed which uses influence diagrams to model tank weight growth as a probabilistic process. Historical weight data for the MI Abrams tank program is used to derive probabilities for the model. The model is used to predict tank weight growth over both the short and long term with the goal of understanding more about how and …

High-Order Finite-Difference Schemes And Their Application To Computational Acoustics, Joe Leo Manthey

Mathematics & Statistics Theses & Dissertations

The primary focus of this study is upon the numerical stability of high-order finite-difference schemes and their application to duct acoustics. Since acoustic waves are known to be non-dissipative and non-dispersive, high-order schemes are favored for their low dissipation and low dispersion relative to the low-order schemes. The primary obstacle to the the development of explicit high-order finite-difference schemes is the construction of boundary closures which simultaneously maintain the formal order of accuracy and the numerical stability of the overall scheme. In this thesis a hybrid seven-point, fourth-order stencil for computing spatial derivatives is presented and the time stability is …

The Study Of Wave-Blocking And Current Effects On Nonlinear Interactions Of Shallow-Water Waves Using Advanced Boussinesq Models, Qin Chen

Civil & Environmental Engineering Theses & Dissertations

The first part of this work focuses on the derivation of enhanced Boussinesq-type equations for the combined motion of waves and currents in shallow water areas.

The strategy proposed in this work is to couple two known methods which are the sponge layer concept suitable for short waves and Sommerfeld radiation condition for currents. This coupling method provides satisfactory non-reflective boundaries for the simulation of fully coupled wave/current motion as demonstrated by the numerical experiments. We verify the model against the well known solutions based on the existing theories and good agreement has been observed. The numerical results confirm the …

A Synthesized Methodology For Eliciting Expert Judgment For Addressing Uncertainty In Decision Analysis, Richard W. Monroe

Engineering Management & Systems Engineering Theses & Dissertations

This dissertation describes the development, refinement, and demonstration of an expert judgment elicitation methodology. The methodology has been developed by synthesizing the literature across several social science and scientific fields. The foremost consideration in the methodology development has been to incorporate elements that are based on reasonable expectations for the human capabilities of the user, the expert in this case.

Many methodologies exist for eliciting assessments for uncertain events. These are frequently elicited in probability form. This methodology differs by incorporating a qualitative element as a beginning step for the elicitation process. The qualitative assessment is a more reasonable way …

Computer-Aided Design Of Coupler-Driven Watt I And Tolerance Synthesis For Four-Bar Linkages, Haitao Li

Mechanical & Aerospace Engineering Theses & Dissertations

Theory to rectify circuit defects in rocker-crank and double-rocker at the synthesis level is described based on the angular joint displacements. It complements the crank-rocker and double-crank circuit rectification to complete the circuit rectification of four-bar linkages. The procedure utilizes the algebraic method where special points followed by a line construction procedure are employed to validate the range of the critical angle that can identify the circuit defects as a function of the design positions prior to the completion of the linkage.

A complete procedure of the rectified synthesis of the coupler-driven Watt I six-bar linkage to pass through the …

Reverse Engineering Of Aircraft Wing Data Using A Partial Differential Equation Surface Model, Jacalyn M. Huband

Mathematics & Statistics Theses & Dissertations

Reverse engineering is a multi-step process used in industry to determine a production representation of an existing physical object. This representation is in the form of mathematical equations that are compatible with computer-aided design and computer-aided manufacturing (CAD/CAM) equipment. The four basic steps to the reverse engineering process are data acquisition, data separation, surface or curve fitting, and CAD/CAM production. The surface fitting step determines the design representation of the object, and thus is critical to the success or failure of the reverse engineering process. Although surface fitting methods described in the literature are used to model a variety of …

The Detoxification Of Petroleum Contaminated Coastal Plain Sandy Soil Using An Amended Vermicomposting Approach, John Charles Kraemer

Health Services Research Dissertations

This study explores the feasibility of utilizing an amended vermicomposting treatment approach for detoxifying petroleum hydrocarbon contaminated sandy soil. The bench-scale testing of gasoline and diesel contaminated soil using three test soil vessels and one control soil vessel was performed in a laboratory setting for a six week time period. The control soil received no treatment other than distilled water to maintain soil moisture. Treatment 1 consisted of direct application of liquid municipal biologic sludge on a weekly basis. Treatment 2 consisted of the addition of 30 Eisenia foetida earthworms and distilled water. Treatment 3 consisted of direct application of …

Single Row Routing: Theoretical And Experimental Performance Evaluation, And New Heuristic Development, David A. Hysom

Computer Science Theses & Dissertations

The Single Row Routing Problem (SRRP) is an abstraction arising from real-world multilayer routing concerns. While NP-Complete, development of efficient SRRP routing heuristics are of vital concern to VLSI design. Previously, researchers have introduced various heuristics for SRRP; however, a comprehensive examination of SRRP behavior has been lacking.

We are particularly concerned with the street-congestion minimization constraint, which is agreed to be the constraint of greatest interest to industry. Several theorems stating lower bounds on street congestion are known. We show that these bounds are not tight in general, and argue they may be in error by at least 50% …

A Sociotechnical Systems Analysis Of The Approval Process For A Complex Public Works Proposal, James C. Pyne

Engineering Management & Systems Engineering Theses & Dissertations

This research applied sociotechnical systems theory to explore the process used by two elected bodies to decide upon adoption of a complex technical engineering proposal. The research used a modified sociotechnical systems conceptual framework that was developed by Pava (1983) for application to non-traditional work settings. Pava applied the conceptual framework to what he termed non-routine office work which is characterized by non-linear conversion flow, multiple, concurrent conversion processes and vocational separatism (Pava, 1983).

The research was designed as a multiple case study of two town councils each undertaking a decision process to approve or reject a public works proposal …

Aerodynamic Gradient-Based Optimization Using Computational Fluid Dynamics And Discrete Sensitivities For Practical Problems, Mohagna Jayendrarai Pandya

Mechanical & Aerospace Engineering Theses & Dissertations

A gradient-based shape optimization methodology based on quasi-analytical sensitivities has been developed for practical three-dimensional aerodynamic applications. The flow analysis has been rendered by a fully implicit, finite-volume formulation of the Euler and Thin Layer Navier-Stokes (TLNS) equations. The flow equations and aerodynamic sensitivity equation have been solved using an alternating-direction-implicit (ADI) algorithm for memory efficiency. A wing geometry model based on space-surface and planform parameterization has been utilized. The present methodology and its components have been tested via several comparisons.

Initially, the inviscid flow analysis for a wing has been compared with those obtained using an unfactored, Preconditioned Conjugate …

Three-Dimensional Aerodynamic Design Optimization Using Discrete Sensitivity Analysis And Parallel Computing, Amidu Olawale Oloso

Mechanical & Aerospace Engineering Theses & Dissertations

A hybrid automatic differentiation/incremental iterative method was implemented in the general purpose advanced computational fluid dynamics code (CFL3D Version 4.1) to yield a new code (CFL3D.ADII) that is capable of computing consistently discrete first order sensitivity derivatives for complex geometries. With the exception of unsteady problems, the new code retains all the useful features and capabilities of the original CFL3D flow analysis code. The superiority of the new code over a carefully applied method of finite-differences is demonstrated.

A coarse grain, scalable, distributed-memory, parallel version of CFL3D.ADII was developed based on "derivative stripmining". In this data-parallel approach, an identical copy …

Development Of A Method For Determining The Relative Manufacturing Complexity Of Advanced Engineering Materials, Shardul Y. Pandya

Engineering Management & Systems Engineering Theses & Dissertations

The immediate adaptation of newly developed materials--with unique and highly desirable properties--is hampered by several factors, including: (1) high material cost and limited availability, (2) lack of information on them, including prior experience in their design and manufacture, immature manufacturing processes and general uncertainty in their behavior patterns, (3) unique handling issues, such as excessive manual labor, high process temperatures, toxicity, disposal problems, limited working lives, and low damage tolerance

Therefore, in spite of their significant benefits, potential users tend to shy away from the widespread use of new materials, instead preferring conventional and tested materials forms.

This dissertation is …

Input Design For Systems Under Identification Using Indirect And Direct Methods, Marco P. Schoen

Mechanical & Aerospace Engineering Theses & Dissertations

The motivation for system identification can be manifold. In this work, the provocation to identify unknown system characteristics is derived from the control engineering point of view. That is, one intends to design a control strategy based on the identified system properties. The used system identification methods are the Open-Loop Kalman filter System Identification method (OKID) and the Closed-Loop System Identification method (CLID). It is shown that the quantitative largest error of the system identification is given by its model representation, that is the attempt to describe a system with model parameters which poses a linear relationship with the input/output …

Reflection High-Energy Electron-Diffraction Study Of Melting And Solidification Of Pb On Graphite, Z. H. Zhang, P. Kulatunga, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The melting and solidification of Pb thin films on pyrolytic graphite are investigated in situ by reflection high-energy electron diffraction. Thin films with thicknesses of 4-150 monolayers are investigated. The surface morphology of the thin films were studied by scanning electron microscopy. Superheating of the Pb thin films by 4±2 to 12±2 K is observed from diffraction intensity measurements. Upon cooling the substrate, the Pb on graphite is seen to supercool by ∼69±4 K.

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics On Cu(100), J. Cao, Y. Gao, R. J. D. Miller, Hani E. Elsayed-Ali, D. A. Mantell

Electrical & Computer Engineering Faculty Publications

The energy dependence of the relaxation of photoexcited electrons in copper was measured using femtosecond time-resolved photoemission spectroscopy to within 0.3 eV above the Fermi level. By performing lifetime measurements under different surface conditions, several surface dynamical processes were investigated. In particular, an anomalous long lifetime feature, which cannot be explained with Fermi-liquid theory, was observed in the lifetime-energy curve. This feature was found originating from the photoexcitation of the strongly localized Cu 3d electrons. ©1997 American Physical Society

Turbulence Modeling Of The Toroidal Wall Heat Load Due To Shear Flows Over Cavities In The Neutral Gas Blanket Divertor Regime, George Vahala, Linda L. Vahala, Joseph Morrison

Electrical & Computer Engineering Faculty Publications

Heat loads to the target plate in reactor tokamaks are estimated to be orders of magnitude higher than those that can be withstood by known materials. In regimes of plasma detachment, there is strong evidence that plasma recombination occurs near the divertor plate, leading to a cold neutral gas blanket. Because of the strong coupling between the plasma and the neutrals within the divertor region, there is significant neutral flows along field lines up to Mach 1.2 and Reynolds numbers over 1000. The effects of three dimensional (3D) neutral turbulence within the gas blanket on heat deposition to the toroidal …

The Effects Of Human-Computer Communication Mode, Task Complexity, And Desire For Control On Performance And Discourse Organization In An Adaptive Task, Cristina Bubb-Lewis

Psychology Theses & Dissertations

The present study examined how different communication patterns affected task performance with an adaptive interface. A Wizard-of-Oz simulation (Gould, Conti, & Hovanyecz, 1983) was used to create the impression of a talking and listening computer that acted as a teammate to help participants interact with a computer application.

Four levels of communication mode were used which differed in the level of restriction placed on human-computer communication. In addition, participants completed two sets of tasks (simple and complex). Further, a personality trait, Desire for Control (DC), was measured and participants were split into high and low groups for analysis. Dependent measures …

An Investigation On The Effect Of Aging And Fatigue Damage On The Mechanical Properties Of A Graphite/Bismaleimide Composite, William M. Johnston Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

This investigation utilizes the open hole tension (OHT) specimen loaded in tension-tension fatigue under isothermal, fixed frequency conditions. A range of load levels and temperature levels where chosen to assess performance. These loads and temperatures ranged from relatively benign conditions (low stress, room temperature) up through aggressive conditions (high stress, high temperature). Measurements of stiffness, damage accumulation, residual strength, weight loss, and glass transition temperature (Tg) were made. Results from this work will help explain the roles of aging, load and fatigue in the performance of elevated temperature OHT specimens as well as provide insights to the individual and synergistic …

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …

Kramers-Kronig Anomalous Dispersion On Single-Mode Fiber-Optic Couplers And Tapers, Arnel C. Lavarias

Electrical & Computer Engineering Theses & Dissertations

The Kramers-Kronig relations couple the real and imaginary part of the dielectric constant of a medium, namely the refractive index n(ω) and the extinction coefficient κ(ω). Changes in n(ω) due to normal and anomalous dispersion (Kramers-Kronig effect) are investigated for the first time using fiber optic couplers and tapers. Kramers-Kronig effect is induced by evanescent wave absorption in these devices. Couplers and tapers have oscillatory spectral outputs that are highly sensitive to the refractive index of the surrounding medium. Theoretical modeling of the Kramers-Kronig effect on couplers and tapers shows two distinct effects. First, the spectral outputs of these devices …

Diamond For Fiber-Optic Raman Spectroscopy, Jianli Zheng

Electrical & Computer Engineering Theses & Dissertations

Raman spectroscopy is a powerful technique for molecular structural studies and concentration measurement. Being a single beam technique, the Raman intensity depends on the optical power of the excitation source, optical alignment of the system, detector response as well as species concentration. To eliminate the unwanted variations in the system and get the concentration information of the species, intensity referencing is necessary. The existing referencing methods either use a constant Raman band of the sample, or add a chemically inert material with known concentration into the sample. Unfortunately, the former method is not always applicable and the latter is not …

Microwave Plasma Chemical Vapor Deposited Diamond Tips For Scanning Tunneling Microscopy, Sacharia Albin, Jianli Zheng, John B. Cooper, Weihai Fu, Arnel C. Lavarias

Electrical & Computer Engineering Faculty Publications

Diamond microparticles were grown on etched tungsten wires using a microwave plasma-assisted chemical vapor deposition process. The apexes on cubo-octahedral particles bound by {100} and {111} facets were effectively used as tunneling tips for scanning tunneling microscopy. The atomically resolved surface image of highly oriented pyrolytic graphite was acquired. Tunneling characteristics revealed a higher electron emission from the diamond tips than that from the platinum–iridium tips. The same diamond tips were used to produce surface indentation and its image. © 1997 American Institute of Physics.

Optical And Electrical Properties Of Cualse² Thin Films Obtained By Selenization Of Cu/Al/Cu... Al/Cu Layers Sequentially Deposited, J. C. Bernède, S. Marsillac, C. El Moctar, A. Conan

Electrical & Computer Engineering Faculty Publications

Optical and electrical properties of CuAlSe₂ thin films obtained by selenization of Cu/Al/Cu...Al/Cu layers sequentially deposited have been investigated. It is shown that the expected energy gap (2.67 eV) is measured for well crystallized films, whereas a slightly higher value is measured for films not so well crystallized. Raman diffusion also shows differences between well and poorly crystallized films with peaks corresponding to the reference powder for the former samples. A p-type conductivity is found whatever the crystalline quality of the samples. The conductivity of the films depends also strongly on their crystalline properties. When the films are badly …

Cualse² Thin Films Obtained By Chalcogenization, S. Marsillac, K. Benchouk, C. El Moctar, J. C. Bernède, J. Pouzet, A Khellil, M. Jamali

Electrical & Computer Engineering Faculty Publications

CuAlSe₂ thin films have been synthesized by chalcogenization of thin Cu and Al layers sequentially deposited by evaporation under vacuum. It is shown that CuAlSe₂ films are obtained with some Cu₂-_δSe and Se phases present at the surface. These surface phases are suppressed by annealing under vacuum and by chemical etching in a KCN solution. At the end of the process, the XRD spectrum demonstrates that textured CuAlSe₂ films have been obtained with preferential orientation of the crystallites along the (112) direction. The gap of the films is 2.7 eV as expected. The …

Assessment Methods For Virtual Laboratories In Civil Engineering Technology, Carol L. Considine, Vernon W. Lewis Jr.

Engineering Technology Faculty Publications

Old Dominion University has developed an extensive distance learning system that includes 40 remote sites. A majority of the sites are located at community colleges. There are 30 sites in Virginia, three sites in North Carolina, one site in Washington State and one site in Arizona. In addition, there are four sites at Higher Education Centers in Virginia and one site at a local industrial facility. The Civil Engineering Technology curriculum requires three laboratory courses, which are a challenge in the distance learning environment because of the lack of laboratory equipment and computers at the broadcast sites. The three courses …

Lyceum: A Multi-Protocol Digital Library Gateway, Ming-Hokng Maa, Michael L. Nelson, Sandra L. Esler

Computer Science Faculty Publications

Lyceum is a prototype scalable query gateway that provides a logically central interface to multi-protocol and physically distributed, digital libraries of scientific and technical information. Lyceum processes queries to multiple syntactically distinct search engines used by various distributed information servers from a single logically central interface without modification of the remote search engines. A working prototype (http://www.larc.nasa.gov/lyceum/) demonstrates the capabilities, potentials, and advantages of this type of meta-search engine by providing access to over 50 servers covering over 20 disciplines.