Engineering Commons^™

Application Of A Finite-Volume Time-Domain Maxwell Equation Solver To Three-Dimensional Objects, Frederick G. Harmon

Theses and Dissertations

Concurrent engineering approaches for the disciplines of computational fluid dynamics (CFD) and electromagnetics (CEM) are necessary for designing future high-performance, low-observable aircraft. A characteristic-based finite-volume time-domain (FVTD) computational algorithm, developed for CFD and now applied to CEM, is implemented to analyze the radar cross section (RCS) of two three-dimensional objects, the ogive and cone-sphere. The FVTD formulation implements a Monotone Upstream-Centered Scheme for Conservation Laws (MUSCL) algorithm for the flux evaluation and a Runge-Kutta multi-stage scheme for the time integration. Developmental FVTD work for the thesis focused on algorithm development to analyze scattering and obtain RCS data for closed-surface perfect …

A Two-Phase Damped-Exponential Model For Speech Synthesis, H. Allan Arb

Theses and Dissertations

It is well known that there is room for improvement in the resultant quality of speech synthesizers in use today. This research focuses on the improvement of speech synthesis by analyzing various models for speech signals. An improvement in synthesis quality will benefit any system incorporating speech synthesis. Many synthesizers in use today use linear predictive coding (LPC) techniques and only use one set of vocal tract parameters per analysis frame or pitch period for pitch-synchronous synthesizers. This work is motivated by the two-phase analysis-synthesis model proposed by Krishnamurthy. In lieu of electroglottograph data for vocal tract model transition point …

Investigation Of Various Shaping Methods For The Development Of A Fully-Monolithic Cmos Constant-Fraction Discriminator, Robert Gentry Jackson

Masters Theses

In this work the design of a constant-fraction discriminator (CFD) fabricated in the Orbit Semiconductor l.2-Jl n-well CMOS process is presented. This timing pick-off circuit is designed for use in the readout electronics of the Lead-Scintillator subsystem of the Pioneering High Eenergy Nuclear Ion eXperiment (PHENIX) Electromagnetic Calorimeter at the Relativistic Heavy Ion Collider (RHIC). The design was driven by stringent requirements including low power consumption, small area, arrayable, low cost and a fully integratable shaping network. Various integratable CFD shaping methods are investigated, and the candidate methods chosen for fabrication were the distributed R-C delay-line shaping, lumped-element R-C shaping …

Experimental Investigation Of Radar Cross Section Spatial Correlation Properties For A Point Scattering Target, John D. Shannon

Theses and Dissertations

This research investigates the spatial correlation of RCS. In pulsed radar systems, probability of detection for partially correlated signals depends on the autocovariance of the target's RCS. The RCS changes pulse to pulse due to spatial and time fluctuations. Spatial fluctuation are due to the motion of all scatterers relative to the radar (i.e. changing aspect angle). Time fluctuations are due to relative motion of scatterers to each other (i.e. wings flexing, engines spinning). Theory developed at AFIT [9] can generate autocovariance estimates from a distribution of scatterers. Theory based autocovariance estimates are compared to static measurement based autocovariance estimates …

Demodulation Of Narrowband Radio Frequency Signals By Aliasing Sampling, Chun-Ching Lin

Dissertations and Theses

The objective of this thesis is to study the demodulation of narrowband radio frequency signals by aliasing sampling in order to reduce the sampling rate. The spectrum can be recreated at the lower frequency position by aliasing sampling. However, if the sampling rate is deviated from the desired one, error will occur. The sensitivity to the frequency error of aliasing sampling is studied.

One main reason of the deviation of the sampling rate is the frequency drifting of the local oscillator. Being able to compensate the oscillator drifting errors inexpensively, automatic frequency control (AFC) loops are important at receivers. Two …

Scheduling And Discrete Event Control Of Flexible Manufacturing Systems Based On Petri Nets, Huanxin Henry Xiong

Dissertations

A flexible manufacturing system (FMS) is a computerized production system that can simultaneously manufacture multiple types of products using various resources such as robots and multi-purpose machines. The central problems associated with design of flexible manufacturing systems are related to process planning, scheduling, coordination control, and monitoring. Many methods exist for scheduling and control of flexible manufacturing systems, although very few methods have addressed the complexity of whole FMS operations. This thesis presents a Petri net based method for deadlock-free scheduling and discrete event control of flexible manufacturing systems. A significant advantage of Petri net based methods is their powerful …

Motion Estimation And Video Coding, Xiaochun Xia

Dissertations

Over the last ten years. research on the analysis of visual motion has come to play a key role in the fields of data compression for visual communication as well as computer vision. Enormous efforts have been made on the design of various motion estimation algorithms.

One of the fundamental tasks in motion estimation is the accurate measurement of 2-D dense motion fields. For this purpose. we devise and present in this dissertation a multiattribute feedback computational framework. In this framework for each pixel in an image. instead of a single image intensity. multiple image attributes are computed as conservation …

Real-Time Implementation Of An Adaptive Control System For A 3-Zone Rapid Thermal Processing Station, David Hur

Theses

In this thesis, the implementation details of a real time adaptive control system for a TI 3-zone RTP station, as well as the simulation and the experimental results are presented. Extensive simulation of the system is performed in order to ensure proper operation of the system. The experimental results are used to verify proper operation of the closed loop control system. Initial experiments were conducted using two thermocouples. Further experiments were conducted using one thermocouple for the purpose of testing the performance of the system using Extended Kalman Filter as the state estimator.

The implementation of the control system is …

Residual Stress Analysis Of Sputtered Tantalum Silicide Thin Film, Young Joo Song

Theses

The influence of different argon pressures on the residual stress, microstructure, and resisitivity of sputtered tantalum silicide thin films has been investigated. TaSi₂ films were deposited onto Si wafers by dc magnetron sputtering. The deposition temperature was assumed to be 300°C. The thickness was about 0.5 μm. The residual stresses in the films deposited at different argon pressures were determined by curvature measurement method. The compressive intrinsic stress of 1033.4MPa was measured at P_Ar = 0.5 mTorr. The intrinsic stress in the films seemed to change from compression to tension as P_Ar increased above 8mTorr. A maximum …

Adaptive Color Correlation Of Knots In Wood Images And Weighted-Value Product Selection Methods In A Machine Vision System, John Robert Goulding

Dissertations and Theses

The biggest obstacle to robust color image processing of wood is in developing a color model that represents all possible defect colors. When the color model is too general or too specific, defect recognition fails because too many or too few non-defect pixels match the model, respectively. Because a color image of wood contains far more clear and clear-grain colored pixels than grain-knot and knot colored pixels, it is beneficial to first statistically identify and remove the clear and clear-grain colors and to use the accumulated data to simultaneously enhance and normalize the remaining grainknot and knot colored pixels. This …

Study Of Stress In Microelectronic Materials By Photoelasticity, Hancheng Liang

Dissertations

The study of stress is playing an important role in microelectronic technology. In comparison with other techniques, the photoelasticity technique has the advantages of having high spatial resolution and high sensitivity. It can be used in qualitative observation in real-time and quantitative determination of stress distribution in the microelectronic materials and devices.

This dissertation presents a systematic study of photoelastic stress analysis in microelectronic materials and devices, ranged from theoretical study to practical system setup, from measurement methods to their applications. At first, based on the detailed survey on the piezo-optic properties of the crystals used in microelectronics, we apply …

Infrared Quarter-Wave Reflection Retarders Designed With High-Spatial-Frequency Dielectric Surface-Relief Gratings On A Gold Substrate At Oblique Incidence, Jian Liu, Rasheed M.A. Azzam

Electrical Engineering Faculty Publications

One- and two-dimensional high-spatial-frequency dielectric surface-relief gratings on a Au substrate are used to design a high-reflectance quarter-wave retarder at 70° angle of incidence and 10.6-μm light wavelength. The equivalent homogeneous anisotropic layer model is used. It is shown that equal and high reflectances (>98.5%) for the p and the spolarizations and quarter-wave retardation can be achieved with two-dimensional ZnS surface-relief gratings. Sensitivities to changes of incidence angle, light wavelength, grating filling factor, and grating layer thickness are considered.

Snow Pack Temperature Sensor, M. Shamshi, Raman Attri, V. Sharma

Raman K. Attri

The study of snow hydrological characteristics plays the major part in forecast of snow-melt, snow run-off water of rivers, potential release of snow avalan'che and climatic changes. Increasing importance of study of snow hydrology has lead to the development of many snow sensors which monitors physical parameter of snow. Design of such snow sensors has been a difficult job because of harsh environmental conditions. This paper present the design considerations and performance characteristics of snowpack temperature profile sensing probe. This probe provides temperature gradient and temperature distributions within the snow-pack, and ground at different depths. The information on temperature distribution …

Determination Of The Refractive Index And Thickness Of Transparent Pellicles By Use Of The Polarization-Independent Absentee-Layer Condition, Y. Cui, R. M.A. Azzam

Electrical Engineering Faculty Publications

The refractive index and the thickness of a transparent pellicle are determined when the pellicle is placed between two vertical crossed polarizers and rotated in the horizontal plane. The transmission axes of the polarizers are neither parallel nor perpendicular to the plane of incidence. The light transmitted through the crossed polarizers reaches a minimum when the pellicle satisfies the absentee-layer condition. The refractive index and the film thickness are obtained from the pellicle orientation angles under such a condition.

Intelligent Dynamic Space Management Systems, Margaret-Rose Madeleine Dabdoub

FIU Electronic Theses and Dissertations

The objective of this work is to design, simulate and synthesize a dynamic space controller system. The concept of space allocation and management can be applied to more than physical space. It may also be taken in the contexts of memory, network or bus management. The management and allocation of any space depends mostly on the twin factors of demand and availability. Time, the size and amount of space available, as well as the number of requests for the spaces, must also be considered. The proposed design has the capability to monitor multiple spaces for vacancies, length of time occupied …

Extended Permutation Filters And Their Application To Edge Enhancement, Russell C. Hardie, Kenneth E. Barner

Electrical and Computer Engineering Faculty Publications

Extended permutation (EP) filters are defined and analyzed. In particular, we focus on extended permutation rank selection (EPRS) filters. These filters are constrained to output an order statistic from an extended observation vector. This extended vector includes N observation samples and K statistics that are functions of the observation samples. The rank permutations from selected samples in this extended observation vector are used as the basis for selecting an order statistic output. We show that by including the sample mean in the extended observation vector, the filters exhibit excellent edge enhancement properties. We also show that several previously defined classes …

Characterization And Fabrication Of A (6h)-Sic As A Piezoresistive Pressure Sensor For High Temperature Applications, Robert Sylvester Okojie

Dissertations

A prototype monolithic 6H-SiC pressure sensor operational up to 350°C, with potential to operate up to 600°C, was batch fabricated and tested. At temperatures higher than 450°C, silicon diaphragms creep under minimal load. To operate beyond 450°C, therefore, the use of 6H-SiC was proposed. However, three key technological issues - fabrication, high temperature metallization, and gage factor characterization - had to be resolved. Since conventional fabrication technology is not applicable to SiC due to its near inert chemistry, photoconductive selectivity techniques to etch the piezoresistors were developed. Techniques to wet etch the cavities in a dark current mode were developed, …

Explicit Congestion Control Algorithms For Available Bit Rate Services In Asynchronous Transfer Mode Networks, Ambalavanar Arulambalam

Dissertations

Congestion control of available bit rate (ABR) services in asynchronous transfer mode (ATM) networks has been the recent focus of the ATM Forum. The focus of this dissertation is to study the impact of queueing disciplines on ABR service congestion control, and to develop an explicit rate control algorithm.

Two queueing disciplines, namely, First-In-First-Out (FIFO) and per-VC (virtual connection) queueing, are examined. Performance in terms of fairness, throughput, cell loss rate, buffer size and network utilization are benchmarked via extensive simulations. Implementation complexity analysis and trade-offs associated with each queueing implementation are addressed. Contrary to the common belief, our investigation …

Design, Process And Performance Simulation Of A 360x360-Element Very High Frame Rate Burst-Image Sensor, Guang Yang

Dissertations

A process was developed for fabrication of 360x360-element Very High Frame Rate (VHFR) burst-image sensor on the bases of one-dimensional (1-D) and two-dimensional (2-D) device and process simulations using SUPREM III, SUPREM IV, PISCES IIB and ISE-TCAD software, and the process data provided by the David Sarnoff Research Center. This process includes SiO₂-Si₃N₄ gate dielectric, four-levels of polysilicon, three-levels of metal, eight implants, and requires twenty-one mask levels. The imagers with a 2-cmx2-cm chip size were fabricated at the David Sarnoff Research Center. The VHFR burst-image sensor is capable of capturing images at frame rates …

A Full Wave Method For Rough Surface Scattering Using Fictitious Current Distributions, Anthony A. Triolo

Dissertations

Rough surface scattering is a current topic of interest in many diverse fields. But, despite its importance, the two most widely used solution methods, the Kirchhoff and first order perturbation methods, are valid only for a restricted range of surface types. There is a large range of surface statistics for which neither of these theories is valid. There are purely numerical solutions to the problem, i.e., the integral equation technique and FDTD method, but these methods require a prohibitively large amount of computer time and storage space for use in practical applications. A full wave method has been introduced by …

The Study Of Sige-Channel Heterojunction Mos Device, Yunchen Qiu

Theses

The advances in the growth of pseudomorphic silicon-germanium epitaxial layer combined with the strong need for high-speed CMOS VLSI circuit have led to increased interest in silicon-based heterojunction MOSFET's transistors. The high-performance heterostructure SiGe MOSFET exhibits higher channel mobility than its bulk Si counterpart. The most critical and challenging process for fabricating a SiGe MOSFET device is that for making a gate oxide with sufficient quality for useful conductivity modulation. PECVD methods was employed to deposit the gate oxide and C-V method was used to investigate the electrical characteristics of the film. For PECVD gate oxide, a film refractive index …

Remote Measurement Calibration In Power System, Xiaofeng Li

Theses

Power system reliability and economy of operation require accurate measurements of current, voltage, real and reactive powers. These measurements are transmitted to a control center of a power system for monitoring, display, and use in power system real-time analysis. The number of measurements is in thousands. Routinely field technicians must calibrate transducers and/or determine other sources of metering errors. Due to the large number of measurements and the time required to check each individual measurement, field calibration procedures are impractical, expensive, and not timely.

There has been a need for a more efficient approach to measurement calibration and identification of …

A Digital Signal Processor Based Optical Position Sensor And Its Application To Flexible Beam Control, Thomas J. Spirock

Theses

A Digital Signal Processor (DSP) based optical position sensor was developed. The sensor system consists of the following components: 1) analog electronics, 2) the DSP based synchronous demodulation software, 3) PC based interface software which samples and saves the data, and 4) PC based control codes for a flexible beam. experiment.

The ability of the system to determine the distance from the optical sensor to the power modulated light source was assessed by the following tests: 1) a stationary drift test to evaluate the system's noise, 2) a short-range test to determine the resolution of the optical sensor over a …

Simple Fast Vector Quantization Of The Line Spectral Frequencies, Jin Zhou

Theses

Speech coding has been of interest to communication specialists for years. A number of technologies for describing and transmitting the speech spectral envelope have been studied. Among them, the Vector Quantization (VQ) of Line Spectral Frequencies (LSF) is receiving more attention because of its good rate-distortion performance. Typically, about 30 bits are assigned to code 10-dimensional LSF vectors with a resulting spectral distortion of less than ldB. However, 30-bit full-search VQ is totally impractical in terms of both computational complexity and memory space. Various standard suboptimal, low-complexity VQ techniques have been used for coding the LSF's in the literature. The …

Low-Frequency Noise In 4h-Silicon Carbide Junction Field Effect Transistors, J. W. Palmour, M. E. Levinshtein, S. L. Rumyantsev, Grigory Simin

Faculty Publications

Low frequency noise in 4H‐silicon carbide junction field effect transistors (JFETs) has been investigated. JFETs with a buried p ⁺ n junction gate were manufactured by CREE Research Inc. Very low noise level has been observed in the JFETs. At 300 K the value of Hooge constant α is as small as α∼10⁻⁵ and the α value can be decreased by an appropriate annealing to α∼2×10⁻⁶. It has been shown that even these extremely low noise values are determined not by the volume noise sources but by the noise at the SiC–SiO₂ interface.

Genetic Algorithms Vs. Simulated Annealing: A Comparison Of Approaches For Solving The Circuit Partitioning Problem, Theodore W. Manikas, James T. Cain

Computer Science and Engineering Research

An important stage in circuit design is placement, where components are assigned to physical locations on a chip. A popular contemporary approach for placement is the use of simulated annealing. While this approach has been shown to produce good placement solutions, recent work in genetic algorithms has produced promising results. The purpose of this study is to determine which approach will result in better placement solutions.

A simplified model of the placement problem, circuit partitioning, was tested on three circuits with both a genetic algorithm and a simulated annealing algorithm. When compared with simulated annealing, the genetic algorithm was found …

Applications Of The Normal-Incidence Rotating-Sample Ellipsometer To High- And Low-Spatial-Frequency Gratings, Y. Cui, R. M.A. Azzam

Electrical Engineering Faculty Publications

The normal-incidence rotating-sample ellipsometer is an instrument that can be used to characterize grating surfaces from the measured ratio ρof complex reflection coefficients r_y/r_x of light polarized perpendicular and parallel to the grating groove direction. Experimental results at different wavelengths for different gratings with spatial frequencies from 150 to 5880 grooves/mm are presented. The groove depth of the 5880-grooves/mm gold-coated grating can be estimated from the measured ρ and rigorous grating theory.

Software Design Control Of An Autonomous Vehicle, Monish Sharma

Honors Capstone Projects and Theses

No abstract provided.

A Crosstalk Correcting Router That Uses Online Noise Simulation To Route High-Speed Multichip Modules, Kenneth J. Mcclellan Jr.

Theses and Dissertations

Existing Multi Chip Module (MCM) auto-routers either ignore crosstalk or use over-simplified crosstalk approximations. Of the routers that do consider crosstalk, very few have the capability to correct crosstalk problems after they occur. This dissertation describes a router that not only has an internal crosstalk model for high speed MCMs which is more accurate than that of other existing routers, but also has the capability to use an online simulator to more accurately determine noise levels. After crosstalk problems occur, the router has the ability to correct these problems. Through memory usage reductions and routing efficiency improvements, this maze router …

On The Adaptive Multi-Stage Detector For Cancellation Of Multiuser Interference In Cdma Wireless Communication Systems, Nadir Sezgin

Dissertations

The classical multiple access techniques such as Frequency Division Multiple Access (FDMA) and Time Division Multiple Access (TDMA) schemes are band limited in terms of their capacity to be used for mobile radio communication. Recent developments in the area of digital signal processing, makes Code Division Multiple Access (CDMA) as a possible solution to the demand of capacity for the mobile radio communication. The capacity of CDMA is limited by multiuser interference, that is the interference from the other users.

The goal of this dissertation is to improve the multiuser CDMA detector with high Bit Error Rate (BER) performance, low …