Engineering Commons^™

Using Afm-Ir To Study Nanoscopic Phase Behavior Of Polymer Blends And Photovoltaic Bulk Heterojunctions, Nathaniel L. Prine

Dissertations

Conjugated polymers (CPs) and polymer blends harbor the potential for high-performance organic solar cells (OSCs) due to their short energy payback time, low cost, solution processability, lightweight attributes, and flexibility. However, OSCs suffer from poor thermal stability compared to their inorganic equivalents. This study explores the thermal instability of OSCs, focusing on phase separation of the photoactive layer under heat, resulting in morphology changes and degradation of power conversion efficiency (PCE). Utilizing atomic-force microscopy coupled with infrared spectroscopy (AFM-IR) and differential scanning calorimetry (DSC), we delve into thermal stability-morphology relationships to devise strategies to improve OSC blend durability under thermal …

Measuring Of Thermal Conductivity And Heat Capacity Of Different Papers And Heat-Sealing Process Of Papers With A Polymer Layer, Amenah Khalaf

Electronic Theses and Dissertations

Packaging is an important and safe way to protect our food and other things through transportation, but the use of plastic based packaging is causing issues with plastic pollution. To replace plastic packaging with a paper-based option that has a barrier coating, good heat sealing will be needed to be a drop-in replacement. While much as been studied on the heat sealing of polymer layers, little has been reported around the heat sealing of paper that has a polymeric barrier coating.

Experiments were conducted to characterize the thermal conductivity and heat capacity of paper as a function of press pressure …

Chemical And Polymer Characterization Of The Potential Modes Of Degradation Of An Injectable Nucleus Pulposus Replacement Device, Antonio G. Abbondandolo

Theses and Dissertations

HYDRAFIL™ is a poly(vinyl alcohol)/poly(ethylene glycol)-based hydrogel nucleus pulposus replacement device that is injected in situ and has demonstrated efficacy in lowering the prevalence and pain associated with back. In this work, we developed a method to analyze HYDRAFIL™ polymer composition using (TGA) and characterized intermolecular bonding interactions within the hydrogel through (FTIR). To function as a permanent implant for nucleus pulposus replacement, HYDRAFIL™ must be stable when exposed to a multitude of degradation pathways, namely, thermal, chemical, and mechanical. We subjected HYDRAFIL™ to accelerated thermal and chemical degradation pathways and described compositional, physical and chemical property changes using a …

Effect Of Environmental And Ultraviolet Degradation On The Albedo Of Polyethylene Sheet Materials For Improved Energy Harvesting By Bifacial Photovoltaic Power Plants, William A. Jang, Roxy H. Jackson-Gain

Materials Engineering

Solar energy farms typically utilize monofacial photovoltaic (mPV) cells in their arrays to capture direct sunlight to produce renewable energy. However, the efficiency of these farms can be increased by 2 – 6% through the implementation of bifacial photovoltaic cells (bPV). These bPV cells function by capturing incident ultraviolet (UV) light energy that is reflected off the surface to increase its overall energy production. The amount of UV energy that is reflected is dependent on the albedo value of surface, which is a measure of energy reflectance. In this study, samples of unreinforced polyethylene (PE), scrim-reinforced polyethylene (SR-PE), and woven …

Additive Manufacturing Of Binary And Ternary Shape Memory Polyester Blends As A Pathway Towards High Entropy Polymer Systems., Luis Eduardo Lares Carrillo

Open Access Theses & Dissertations

The purpose of this work is to incorporate additive manufacturing technology (AM) in the development of shape memory polymer blends. Two polyester blend systems were developed, one binary and the other ternary. The binary blend consisted of polycaprolactone (PCL) and thermoplastic polyurethane (TPU) and the ternary blend was composed of PCL, TPU and polylactic acid (PLA). Test specimens were fabricated with the AM technology of fused filament fabrication (FFF). Several tests were performed to characterize the mechanical and shape memory properties. A dynamic mechanical analyzer (DMA) was first used to establish the shape recovery temperature. Tensile testing was carried out …

Beeswax Wraps As An Alternative To Single-Use Plastics, Sarah Skiver

Williams Honors College, Honors Research Projects

The project goal was to compare the food storage efficacy of sustainable beeswax wraps verses the single-use plastic methods of resealable plastic sandwich bags and plastic cling wrap. The goal was also to test the reusability of the beeswax wraps, as it is a key advantage of beeswax wraps that is advertised. The project purpose was to explore sustainable and eco-friendly alternatives to single use plastics, which are harmful to the environment in both their production and their disposal. Food spoilage was compared in beeswax wrap, plastic sandwich bags, and plastic cling wrap, and spoilage was also observed in a …

Effects Of Polymer Side-Group Size On Interfacial Mechanics Of Graphene-Polymer Nanocomposites, Grace Brokaw

All Theses

Graphene-reinforced polymer nanocomposites possess excellent mechanical, thermal, and electrical properties, which make them promising candidates for various applications. Favorable interfacial interactions and mechanics between graphene sheets and polymer matrices are often essential to achieve superior mechanical properties. Nevertheless, it remains largely elusive how molecular features of polymer systems, particularly the side-group size of polymer chains, affect the interfacial mechanics between graphene sheets and polymer matrices, primarily due to challenges in well controlling these features in experiments. On the other hand, exploring their roles in the mechanical properties of graphene-polymer nanocomposites is very expensive to study with all-atomistic molecular dynamics (MD) …

Functional Bottlebrush Polymer Additives For Thin Films And Coatings, Travis S. Laws

Doctoral Dissertations

Bottlebrush polymers are a class of highly branched polymers consisting of polymeric side chains that are densely grafted to a linear backbone. Their highly branched architecture results in surface enrichment across a broad range of materials. The goal of my research has been centered around the design of functional bottlebrush polymers and their use as surface active additives in blend films and coatings.

In the first chapter, we examine the segregation behavior of polystyrene bottlebrushes that are blended with linear polystyrene. We systematically vary the lengths of the bottlebrush backbone (Nb), side-chain (Nsc), and the linear matrix (Nm) in order …

Characterization Of 3d Stereolithography (Sla) Printed Polymer For Autonomous-Flow Microfluidic Devices, Michelle Gamboa

Open Access Theses & Dissertations

3D Stereolithography (SLA) printing is a high-throughput, precise and reproducible manufacturing platform which makes it a desirable technique to develop microfluidic devices for bioanalytical applications. However, limited information exists regarding the physical, chemical, and biological properties of the polymer resins used in 3D SLA printing. This project demonstrates the characterization of a commercially available 3D SLA printed resin polymer used to develop an autonomous-flow (self-driven) microfluidic device. In this investigation, time-dependent materials characterization was done on the Formlabs clear V4 resin to observe changes in mechanical and surface properties. The clear, printed polymer was analyzed with attenuated total reflectance (ATR), …

Characterization Of Thermal Gelation Properties In Bioresorbable Thermally Activated Hydrogel Polymers For Hernia Surgery Applications, Alexander Mayfield

All Theses

Hydrogel adhesives are a new class of materials with excellent biocompatibility, which makes them very attractive for biomaterial applications. It has been previously shown that Tetronic T1107, a four-arm poly (propylene oxide)-poly (ethylene oxide) (PPO-PEO) block copolymer, is useful as a chemical crosslinking thermo-responsive hydrogel for bioadhesive applications. The end groups of this polymer are modified with acrylate and N-hydroxysuccinimide (NHS) functional groups. The acrylate end group gives the polymer cohesive properties with long-range chemical crosslinking using dithiothreitol (DTT), while the NHS end group gives the polymer adhesive properties through bonding with amines found in organic tissue. It was found …

3d Printed Multicomponent Polymer Based Materials Via Hybrid Filaments: Fabrication And Characterization, Erik Antonio

All Dissertations

Additive manufacturing, also known as 3D printing, promises a manufacturing revolution for both industry and academic circles. One of the most widely used method of 3D printing is Fused Deposition Modeling (FDM) or Fused Filament Fabrication (FFF), which requires a thermoplastic filament to be directed towards a heating block and then deposited via extrusion layer by layer to produce a finished part. However, there are significant issues with this technology, mainly a limitation on the materials available for use and mechanical property deficiencies when compared to traditional manufacturing. These issues are brought about by the temperature limited nature of the …

Additive Manufacturing Of Sub-Micron Features And Mechanical Linkages, David K. Limberg

Doctoral Dissertations

In recent years material constraints have become the limiting factor in several fields, including batteries, robotics, and medicine, and these needs have prompted the development of materials with programmable properties. To this end, much effort has been dedicated to designing metamaterials that have unprecedented optical, mechanical, and thermal properties, along with systems for additive manufacturing to build their complex structures with high precision and throughput. The field of additive manufacturing has proved to be a platform for innovation across many industries yet is still limited with regards to feature sizes, print rates, and diversity of materials. Mechanical devices like linkages …

Electromechanical Fatigue Properties Of Dielectric Elastomer Stretch Sensors Under Orthopaedic Loading Conditions, Andrea Karen Persons

Theses and Dissertations

Fatigue testing of stretch sensors often focuses on high amplitude, low-cycle fatigue (LCF) behavior; however, when used for orthopaedic, athletic, or ergonomic assessments, stretch sensors are subjected to low amplitude, high-cycle fatigue (HCF) conditions. As an added layer of complexity, the fatigue testing of stretch sensors is not only focused on the life of the material comprising the sensor, but also on the reliability of the signal produced during the extension and relaxation of the sensor. Research into the development of a smart sock that can be used to measure the range of motion (ROM) of the ankle joint during …

Cmos Compatible Carbonization Of Polymer For Elctrochemical Sensors, Mohammad Aminul Haque

Doctoral Dissertations

Carbon-based electrodes that are integrable with CMOS readout electrodes possess great potential in a wide range of cutting-edge applications. The primary scientific contribution is the development of a processing sequence which can be implemented on CMOS chips to fabricate pyrolyzed carbon microelectrodes from 3D printed polymer microstructures to develop lab-on-CMOS monolithic electrochemical sensor systems. Specifically, optimized processing conditions to convert 3D printed polymer micro- and nano-structures to carbonized electrodes have been explored in order to obtain sensing electrodes for lab-on- CMOS electrochemical systems. Processing conditions have been identified, including a sequel of oxidative and inert atmosphere anneals to form pyrolyzed …

Evaluation Of Accelerated Testing Methods To Predict The Effects Of Chemical Exposure On Mechanical Properties Of Polyester Composites In Municipal Wastewater Service, Roberto A. Garcia

Theses and Dissertations

Composite Access Products (CAP) is a company that is determined to replace traditional steel manhole covers with fiber reinforced polymer alternatives that have similar performance while also introducing several advantages. CAP can achieve this by manufacturing the polymer manhole covers using high-speed, high pressure compressing molding to produce lightweight, long-lasting, corrosive resistant covers. CAP’s composite covers have been approved for use by TXDOT in roadway zones. Despite this, they must now undergo more testing and verification for use in environments with highly corrosive elements such as sewage environments and waste processing plants. In these situations, the polymer manhole covers will …

Analysis Of The Self-Heating Effect On Unfilled Poly(Methyl Methacrylate) Due To Cyclic Behavior, Muhammed R. Kose

All Theses

Poly(methyl methacrylate, (PMMA) has been implemented as part of the supporting structure in complete hip and knee replacements since the 1950s. Known as bone cement while in the body, PMMA is known to undergo compressive and tensile stresses that wear down the bio-compatible barrier and cause pieces to come loose inside the human body. These pieces are then attacked by the body’s own nervous system, leading to inflammation, and eventually necessitating replacement. It has been documented that under cyclic loading PMMA can reach temperatures that start to degrade its tensile capabilities. In this study the potential cause of self-heating was …

Graphene Oxide-Thermoplastic Nanocomposites: Fabrication And Properties, Seyedeh Mastooreh Seyedi Ghezghapan

All Dissertations

Polymer nanocomposites are used for a wide variety of applications. These nanocomposites can have a number of important characteristics depending on the nature of the nanomaterial, its size, volume fraction, its distribution, and interactions within the host polymer. Mechanical strength, thermal and electrical conductivity are some of these materials' most focused and studied features. Besides the positive influences of the reinforcements, nanomaterials also might have some adverse impacts on the polymer matrix. These issues could arise from the aggregation of the fillers and the poor interfacial interactions of the components. Several approaches are introduced to modify the nanofillers and enhance …

Sustainable Polylactic Acid Foam Development Through Solid-State Processing, Philip Onffroy

Honors Theses

Plastics play a vital role in global materials industries, but they contribute to environmental and ecological toxicity effects that accelerate climate change. One important category of plastic material is polymer foams, which have widespread applications in insulation, packaging, and storage. Current bio-based plastic foams that originate from natural, non-petroleum feedstocks are potential solutions but do not yet have adequate properties to supplant petrochemical-based plastic foams. This project aims to generate, test, and analyze bio-based polylactic acid (PLA) polymer foams developed through methods involving solid-state processing such as solid-state shear pulverization (SSSP) and cryogenic milling. SSSP has previously been shown to …

Oxidative Aging And Fracture Behavior Of Polymers And Composites: Theory, Modeling And Experiments, Shabnam Konica

Dissertations, Master's Theses and Master's Reports

Polymers and their composites (PMC) have emerged as effective alternative materials in structural, aerospace, and automotive industries due to their lightweight and tunable properties compared to metals. However, these materials tend to degrade during their operations in extreme environments. In this work, two extreme conditions are considered: - i) high-temperature oxidative degradation of polymers and polymer-based composites ii) Fracture and damage of polymer-based composites under thermo-mechanical loading.

Polymer oxidation starts when oxygen from the ambient diffuses into the bulk material and initiates chemical reactions to develop a coarse, brittle oxide layer on the exposed surface. The oxidative degradation process is …

Wetting Transition On 3d-Printed Surfaces, Isabelle Moryan

Williams Honors College, Honors Research Projects

Taking the previous research conducted, this project aims to further the study and research of the wettability of surfaces. Surface features and types are important factors to their wettability. The geometric properties of a surface can make it more hydrophobic and hydrophilic. Extreme cases of hydrophobic and hydrophilic surfaces lead to water repulsion or water absorption, even under extreme conditions. The goal of this project is to gain further insight on how fabricated 3D-printed featured surfaces and examine the wetting transition on these surfaces. In particular, cylindrical pillars will be studied with varied pillar spacing, height and diameter. In addition, …

Geotextile Design And Performance For Dewatering Of Rare Earth Element Sludge Produced From Acid Mine Drainage, Cory J. Nasiadka

Graduate Theses, Dissertations, and Problem Reports

Acid Mine Drainage (AMD) is an environmental legacy of mining operations that forms when sulfide minerals within the earth are exposed to water and oxygen and has significant harmful effects on the environment when left untreated. Researchers at West Virginia University found large concentrations of REE/CMs (Rare Earth Elements and Critical Minerals) in AMD treatment sludge. REE/CM consist of a group of 17 elements that are crucial to the production of advanced technologies. Due to an extremely low domestic supply of REE/CM in the United States, domestic sources and production of REE/CM are being investigated. This research investigates geotextile design …

Mimicking The Namib Desert Beetle With Hydrophilic And Hydrophobic Surfaces, Tyler Bracewell

Williams Honors College, Honors Research Projects

The Namib Desert beetle, Stenocara gracilipes, condenses fog that rolls in off the west coast of Namibia to provide itself with the water it needs for the day. By lifting its abdomen into the air to collect the water vapor, it condenses on hydrophilic bumps that are about 500μm in diameter and are spaced apart about 500-1500μm. Once the water reaches a critical size, the droplet rolls off the hydrophilic bump and onto the flat hydrophobic surface of the elytra. Since the beetle is angled with its abdomen in the air, the water rolls down to its mouth. A …

Amine-Functionalized Interpenetrating Polymer Networks For Co2 Capture, James Wills

Williams Honors College, Honors Research Projects

The research performed looked to advance the studies of vacuum swing absorption of Carbon Dioxide to help combat global climate change issues. The focus of the project was to create an anime-polymer sorbent that will weakly absorb and desorb CO2. The sorbent must be durable and be able to withstand multiple uses. The creation of a porous polymer matrix aided in the amines' ability to absorb CO2. Created samples underwent several qualitative and quantitative tests to determine their usefulness as an industrial sorbent. Infrared spectroscopy was used to study the effectiveness of the amine sorbents. Studying the changes in the …

Plasma Treatment Of High-Density Polyethylene, Linear Low-Density Polyethylene, And Polyvinyl Chloride Geomembranes By Air And Oxygen, Merve Koca Uyar

USF Tampa Graduate Theses and Dissertations

High-density polyethylene (HDPE), linear low-density polyethylene (LLDPE), and polyvinyl chloride (PVC) geomembranes were treated with air and oxygen plasma. The purpose of air and oxygen plasma treatment of geomembrane surface is to increase the surface wettability of these materials, thereby increasing adhesive properties. Increasing adhesive properties enables a surface to be coated with a desired material with antibacterial, antioxidant, and UV resistant characteristics, without changing bulk material properties. To protect the geomembranes from oxidation degradation, UV degradation and biological degradation, it is important to increase the antibacterial, antioxidant, and UV resistant properties of geomembrane. Before and after the plasma treatments …

Inhomogeneous Composite Design For High Energy Impact Resistance Through Computational Design, Physical Testing And Analysis, And Mathematical Modeling, Trenin Bayless

Graduate Theses & Non-Theses

Research in the development of impact resistant materials has been an expanding field for the better part of a hundred years. The development of a light penetration resistant and man-portable system that can resist extreme quantities of kinetic energy has been a subject of substantial study. In particular, the use of composite materials, polymers, ceramics, and metals has been critical to the development of the field. With the advent of complex computational programs for defining material properties, it has become possible to use simulations as a starting point for the development of next generation armored systems. To that end, it …

Stretching The Applications Of Biomass: Development Of Lignin Based Thermoplastic Elastomers And Composite Materials, Anthony Stephen Bova

Doctoral Dissertations

Bio-based plastics and composites have seen increased industry adoption in recent years due to growing demand for materials with a low carbon footprint. The use of lignin as a feedstock for polymers has seen growing interest as the concept of an integrated cellulosic biorefinery gains traction and advances the need to use all components of separated biomass for value-added applications. Historically, use of lignin in thermoplastic and elastomeric copolymers and blends has been bottlenecked by the inability to introduce lignin content above 30 weight percent due to difficulties with interfacial adhesion of lignin with other soft segments. Efforts to overcome …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Enhancement Of Electrospun Nanofiber Properties Via Automated Track Post-Draw Processing, David Anthony Brennan

Theses and Dissertations

Electrospinning is an alternative manufacturing method, capable of producing fibers with nanoscale diameters from a wide range of different polymers in a process which is relatively simple and inexpensive in comparison to other forms of nanofiber production. This has made electrospinning the subject a great deal of research as a method of producing nanofibers for various high-performance applications. However, electrospun nanofiber tensile strength is weak in comparison to conventional fibers of the same material, preventing widespread use and marketization. This disparity in mechanical strength is attributed to poor polymer chain alignment in individual fibers, caused by the absence of a …

An Investigation Of Cross-Links On Crystallization And Degradation In A Novel, Photocross-Linkable Poly (Lactic Acid) System, Nicholas Baksh

USF Tampa Graduate Theses and Dissertations

Polymeric molecular structure consists of repeating units bonded together. Mechanicalproperties can be altered without affecting chemical makeup by altering the number of these units. Small molecules can be introduced and/or polymers can be modified to form bonds between molecular chains. Cross-linking, as this is called, also introduces mechanical variation with minimal effects on chemical composition. Lastly, polymer chains reorient themselves in response to intermolecular forces. This temperature dependent response is known as crystallization. Although chemistry is unaltered, mechanical properties can depend highly on the percent of the sample that is crystallized.

Cross-linking is known to enhance the mechanical properties of …

Multi-Level Analysis Of Atomic Layer Deposition Barrier Coatings On Additively Manufactured Plastics For High Vacuum Applications, Nupur Bihari

Dissertations, Master's Theses and Master's Reports

While hardware innovations in micro/nano electronics and photonics are heavily patented, the rise of the open-source movement has significantly shifted focus to the importance of obtaining low-cost, functional and easily modifiable research equipment. This thesis provides a foundation of open source development of equipment to aid in the micro/nano electronics and photonics fields.

First, the massive acceptance of the open source Arduino microcontroller has aided in the development of control systems with a wide variety of uses. Here it is used for the development of an open-source dual axis gimbal system. This system is used to characterize optoelectronic properties of …