Engineering Commons^™

Considerations For The Design Optimization Of Floating Offshore Wind Turbine Blades, Evan M. Gaertner

Doctoral Dissertations

Floating offshore wind turbines are an immature technology with relatively high costs and risk associated with deployment. Of the few floating wind turbine prototypes and demonstration projects deployed in real metocean conditions, all have used standard turbines design for onshore or offshore fixed bottom conditions. This neglects the unique unsteady aerodynamics brought on by floating support structure motion. While the floating platform has been designed and optimized for a given rotor, the global system is suboptimal due to the rotor operating in conditions outside of which it was design for. If the potential offered by floating wind turbines is to …

Instructional Case Studies In The Field Of Windfarm Optimization, N. Francesco Baker

Theses and Dissertations

Wind farm layout optimization is a multidisciplinary undertaking, requiring students and researchers to integrate many skillsets in order to optimize turbine placement. There is currently a lack of useful benchmarking exercises for participants in the field to compare the efficacy of their methods. This work details the construction and completion of a set of four case studies meant to satisfy this need, with the hope of providing some insight into useful layout optimization approaches. These case studies are intended to also serve as instructive introductory exercises with which newcomers researching wind energy may incrementally practice and increase their abilities.The first …

Machine Learning Based Applications For Data Visualization, Modeling, Control, And Optimization For Chemical And Biological Systems, Yan Ma

LSU Doctoral Dissertations

This dissertation report covers Yan Ma’s Ph.D. research with applicational studies of machine learning in manufacturing and biological systems. The research work mainly focuses on reaction modeling, optimization, and control using a deep learning-based approaches, and the work mainly concentrates on deep reinforcement learning (DRL). Yan Ma’s research also involves with data mining with bioinformatics. Large-scale data obtained in RNA-seq is analyzed using non-linear dimensionality reduction with Principal Component Analysis (PCA), t-Distributed Stochastic Neighbor Embedding (t-SNE), and Uniform Manifold Approximation and Projection (UMAP), followed by clustering analysis using k-Means and Hierarchical Density-Based Spatial Clustering with Noise (HDBSCAN). This report focuses …

Spacecraft Trajectory Optimization Suite (Stops): Design And Optimization Of Multiple Gravity-Assist Low-Thrust (Mgalt) Trajectories Using Modern Optimization Techniques, Michael G. Malloy

Master's Theses

The information presented in the thesis is a continuation of the Spacecraft Trajectory Optimization Suite (STOpS). This suite was originally designed and developed by Timothy Fitzgerald and further developed by Shane Sheehan, both graduate students at California Polytechnic State University, San Luis Obispo. Spacecraft utilizing low-thrust transfers are becoming more and more common due to their efficiency on interplanetary trajectories, and as such, finding the most optimal trajectory between two planets is something of interest. The version of STOpS presented in this thesis uses Multiple Gravity-Assist Low-Thrust (MGALT) trajectories paired with the island model paradigm to accomplish this goal. The …

ℓ-Ctp: Utilizing Multiple Agents To Find Efficient Routes In Disrupted Networks, Andrew Alseth

Graduate Theses and Dissertations

Recent hurricane seasons have demonstrated the need for more effective methods of coping with flooding of roadways. A key complaint of logistics managers is the lack of knowledge when developing routes for vehicles attempting to navigate through areas which may be flooded. In particular, it can be difficult to re-route large vehicles upon encountering a flooded roadway. We utilize the Canadian Traveller’s Problem (CTP) to construct an online framework for utilizing multiple vehicles to discover low-cost paths through networks with failed edges unknown to one or more agents a priori. This thesis demonstrates the following results: first, we develop the …

Bullwhip Effect Of A Closed Leep Supply Chain With And Without Information Sharing Of Customer Demand, Jui-Hsin Hsu

Theses and Dissertations

In recent years, companies have become interested in a closed-loop supply chain that is concerned with the recovery pipeline. The expenses of a company can be influenced by large inventories and backlogs due to the bullwhip effect in the supply chain. Previous literature has shown that the bullwhip effect can be decreased by a reverse supply chain. This paper develops a closed-loop supply chain including seven echelons for recovery of end-of-life products. The model considers the order-up-to inventory policy and the exponential smoothing forecasting with a trend method in the system to assist in determining the ordering quantities. The best …

Interplanetary Trajectory Optimization With Automated Fly-By Sequences, Emily Ann Doughty

Master's Theses

Critical aspects of spacecraft missions, such as component organization, control algorithms, and trajectories, can be optimized using a variety of algorithms or solvers. Each solver has intrinsic strengths and weaknesses when applied to a given optimization problem. One way to mitigate limitations is to combine different solvers in an island model that allows these algorithms to share solutions. The program Spacecraft Trajectory Optimization Suite (STOpS) is an island model suite of heterogeneous and homogeneous Evolutionary Algorithms (EA) that analyze interplanetary trajectories for multiple gravity assist (MGA) missions. One limitation of STOpS and other spacecraft trajectory optimization programs (GMAT and Pygmo/Pagmo) …

B-Plane Targeting With The Spacecraft Trajectory Optimization Suite, Jared Graef

Master's Theses

In interplanetary trajectory applications, it is common to design arrival trajectories based on B-plane target values. This targeting scheme, B-plane targeting, allows for specific target orbits to be obtained during mission design. A primary objective of this work was to implement B-plane targeting into the Spacecraft Trajectory Optimization Suite (STOpS). This work was based on the previous versions of STOpS done by Fitzgerald and Sheehan, however STOpS was redeveloped from MATLAB to python. This updated version of STOpS implements 3-dimensional computation, departure and arrival orbital phase modeling with patched conics, B-plane targeting, and a trajectory correction maneuver. The optimization process …

Optimizing The Performance Of Multi-Threaded Linear Algebra Libraries Based On Task Granularity, Shahrzad Shirzad

LSU Doctoral Dissertations

Linear algebra libraries play a very important role in many HPC applications. As larger datasets are created everyday, it also becomes crucial for the multi-threaded linear algebra libraries to utilize the compute resources properly. Moving toward exascale computing, the current programming models would not be able to fully take advantage of the advances in memory hierarchies, computer architectures, and networks. Asynchronous Many-Task(AMT) Runtime systems would be the solution to help the developers to manage the available parallelism. In this Dissertation we propose an adaptive solution to improve the performance of a linear algebra library based on a set of compile-time …

Solving Process Planning And Scheduling Problems Using The Concept Of Maximum Weighted Independent Set, Kai Sun

Dissertations - ALL

Process planning and scheduling (PPS) is an essential and practical topic but a very intractable problem in manufacturing systems. Many research studies use iterative methods to solve such problems; however, they cannot achieve satisfactory results in both quality and computational speed. Other studies formulate scheduling problems as a graph coloring problem (GCP) or its extensions, but these formulations are limited to certain types of scheduling problems. In this dissertation, we propose a novel approach to formulate a general type of the PPS problem with resource allocation and process planning integrated towards a typical objective, minimizing the makespan. The PPS problem …

Characterization And Optimization Of An Image Charge Detector For The Measurement Of Martian Dust, Jace Rozsa

Theses and Dissertations

Image charge detector (ICD) technology has existed for decades. However, not until recently has an ICD been proposed for use in space exploration, specifically for studying the characteristics of the dust on Mars. Characterizing the dust on Mars is crucial for designing equipment to aid manned missions. It also improves our understanding of Mars' climate and weather systems. An ICD utilizing printed circuit board (PCB) electrodes, coupled with a custom differential amplifier, is best suited for this type of measurement because of its light weight, simplicity, and noise performance. The noise floor of our particular amplifier is measured to be …

Investigation Of Isotruss® Structures In Compression Using Numerical, Dimensional, And Optimization Methods, Hanna Belle Opdahl

Theses and Dissertations

The purpose of this research is to investigate the structural efficiency of 8-node IsoTruss structures subject to uniaxial compression using numerical, dimensional, and optimization methods. The structures analyzed herein are based on graphite/epoxy specimens that were designed for light-weight space applications, and are approximately 10 ft. (3 m) long and 0.3 lb. (0.14 kg). The principal failure modes considered are material failure, global buckling, local buckling at the bay level, and longitudinal strut buckling. Studies were performed with the following objectives: to correlate finite element predictions with experimental and analytical methods; to derive analytical expressions to predict bay-level buckling; to …

Modeling And Optimization Algorithm For Sic-Based Three-Phase Motor Drive System, Ren Ren

Doctoral Dissertations

More electric aircraft (MEA) and electrified aircraft propulsion (EAP) becomes the important topics in the area of transportation electrifications, expecting remarkable environmental and economic benefits. However, they bring the urgent challenges for the power electronics design since the new power architecture in the electrified aircraft requires many benchmark designs and comparisons. Also, a large number of power electronics converter designs with different specifications and system-level configurations need to be conducted in MEA and EAP, which demands huge design efforts and costs. Moreover, the long debugging and testing process increases the time to market because of gaps between the paper design …

Optimization Of Aileron Spanwise Size And Shape To Minimize Induced Drag In Roll With Correlating Adverse Yaw, Joshua R. Brincklow

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Most modern aircraft make use of modifying the main wing in flight to begin a roll. In many cases, this is done with a discrete control surface known as an aileron. The lift, drag, and moments for the wing are affected in part by the location and size of the ailerons along the length of the wing. The lift, drag, and moments can be found using a lifting-line theory that considers the circulation in airflow from many small sections of the wing. To minimize the drag due to lift on the wing, the ailerons must be optimized for the best …

Optimization Of Indentation For The Material Characterization Of Soft Pva-Cryogels, Md. Mansur Ul Mulk

Electronic Thesis and Dissertation Repository

Over the past few years a variety of clinical procedures aiming at tissue repair and other relevant therapies have been under active investigation [12,32]. Success of procedures aimed at soft tissue repair depend on the combined response of biochemical and biomechanical properties of the organs neighbouring the tissue [53]. Using human or animal cadaveric tissue for this purpose is very challenging due to issues pertaining to biodegradability and infection or biohazard risk factors [135,205].As such, tissue mimicking materials (e.g. Polyvinyl Alcohol Cryo-gel (PVA-C)) have been investigated to satisfy the need for the said clinical applications. Advantages of using tissue-mimicking materials …

Improved Fermentation Design And Screening Devices For Biobutanol Production, Garret Christopher Munch

Electronic Thesis and Dissertation Repository

A worldwide increase in demand for renewable fuels has revived interest in fermentatively produced butanol. However, butanol fermentation suffers from low product yields and productivity. The work presented in this thesis addresses part of these research and development needs at three levels: innovative fermentation process design; genetic manipulation for strain enhancement; and the development of a new tool for anaerobic process characterization and optimization.

Product yield could be increased through traditional fermentation engineering. Co-fermentation of butyric acid with glycerol increased the butanol yield from 0.45 mol/mol (mols C in butanol / mol C in substrates) to 0.51 mol/mol. In building …

Development Of A 3d Computational Vocal Fold Model Optimization Tool, Austin C. Vaterlaus

Theses and Dissertations

One of the primary objectives of voice research is to better understand the biomechanics of voice production and how changes in properties of the vocal folds (VFs) affect voice ability and quality. Synthetic VF models provide a way to observe how changes in geometry and material property affect voice biomechanics. This thesis seeks to evaluate an approach of using a genetic algorithm to design synthetic VF models in three ways: first, through the development of a computationally cost-effective 3D vocal fold model; second, by creating and optimizing a variation of this model; and third, by validating the approach. To reduce …

Robust Real-Time Model Predictive Control For High Degree Of Freedom Soft Robots, Phillip Edmond Hyatt

Theses and Dissertations

This dissertation is focused on the modeling and robust model-based control of high degree-of-freedom (DoF) systems. While most of the contributions are applicable to any difficult-to-model system, this dissertation focuses specifically on applications to large-scale soft robots because their many joints and pressures constitute a high-DoF system and their inherit softness makes them difficult to model accurately. First a joint-angle estimation and kinematic calibration method for soft robots is developed which is shown to decrease the pose prediction error at the end of a 1.5 m robot arm by about 85\%. A novel dynamic modelling approach which can be evaluated …

Optimization Of Union College’S Microgrid To Meet All Load With A Least-Cost, Low-Carbon Energy Mix, Caitlin Mcmahon

Honors Theses

A microgrid is a localized electric grid that generates some or all of the power used to meet its load. Union College currently has a microgrid that meets 70 percent of the campus’ load and is connected to the main grid. It is made up of a cogeneration plant as well as solar photovoltaic panels and wind turbines, which are renewable energy sources. The goal of this project is to determine the least cost, low-carbon energy mix that meets 100 percent of the campus’ load. The issue with solar and wind power is that they are variable based on time …

Comparative Analysis Of Simulation Models Of The Production Of Ethylbenzene, Osariemen Imafidon

Honors Theses

Process Engineering is all about making sure a raw material can become the desired product with as little variation as possible, while achieving the customer's specifications. Many equipment used for chemical processes cannot be physically inspected during operation at steady state, hence, the need for simulation software. The objective of this study was to compare the results of three different simulation packages to evaluate their efficacy within process design.

This study focused on the economic analysis of the production of Ethylbenzene using various models. The base case variables were inputted into each model to simulate the calculations for a fully …

Optimization And Simulation Models To Improve Access To Organ Transplantation In The United States., Fatemeh Karami

Electronic Theses and Dissertations

Organ allocation in the U.S. is administrated by the United Network of Organ Sharing (UNOS). UNOS’s mission is to ensure fair and equitable allocation of organs as stated in the Code of Federal Regulations, which reads "neither place of residence nor place of listing shall be a major determinant of access to transplant". Despite the regulations, there has been endless controversy surrounding the disparity in access to organ transplants. In this context, the primary research goal in this dissertation was to reduce geographic disparity in access to transplants in the U.S., with a focus on heart and kidney transplants. To …

Locating Emergency Shelters While Incorporating Spatial Factors, Justin Taylor

Graduate Theses and Dissertations

In the immediate response phase of a natural disaster, local governments and nonprofit agencies often establish shelters for affected populations. Decisions regarding at which locations to open shelters are made ad hoc based on available building inventory, and may result in high travel impedance to reach shelters and congestion. This thesis presents a shelter location optimization model based on the two-step floating catchment area (2SFCA) method. The 2SFCA method creates a shelter accessibility score for each areal unit (e.g., census block group) which represents the ability for persons in the unit to access shelter capacity with low travel impedance, relative …

Curriculum Optimization Via Activity-On-Node Network Modeling, Caroline Rhomberg

Industrial Engineering Undergraduate Honors Theses

University degree plans must be carefully planned so that they allow students the best chance of succeeding. Although for the better, with the advancement of technology and its incorporation into the classroom, it can be argued that the complexity and difficulty of some long-established engineering core classes has changed. With this trend certain combinations of engineering courses have become unfavorable in terms of course withdrawal and fail rates stemming from the interaction of course challenges. A wealth of data has been collected on this topic and will be utilized in this project. As one can imagine, the probability of success …

Nonpoint Source Pollution Control Using A Multi-Objective Optimization Tool For Best Management Practices Selection And Spatial Placement In The Lower Bear River Watershed, Utah, Ali A. Salha

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation presents a set of approaches to help address water quality problems related to total phosphorus loads in water bodies. Water quality degradation is caused by many nonpoint sources such as agricultural runoff, fertilizers applications, and bank erosion. Three studies present methodologies for water quality protection from degradation in watersheds. The first study demonstrates the application of a watershed simulation tool that can quantify flows in the watershed, the amount of released pollutants and identify the areas contributing to the pollutants’ release in the watershed. The second study presents a simple combination tool that can pair potential management practices …

Efficient Elevator Algorithm, Sean M. Toll, Owen Barbour, Carl Edwards, Daniel Nichols, Austin Day

Chancellor’s Honors Program Projects

No abstract provided.

Three-Level Converters For Low Voltage Active Front End Motor Drives, Marzieh Karami

Theses and Dissertations

Electric drives with Active Front End (AFE) converters can provide benefits such as lower harmonic current injections to the grid, smaller size filters, lower THD values and cost saving for injection of power to the grid in brake situations. SiC-MOSFET based two-level converters can be a promising topology for Active Front End (AFE) application in electric drives. The possibility of high switching frequency will make the grid filters smaller. Grid filters are used for EMC and power quality issues. However, there are practical limitations for increasing the switching frequency such as dead time in the gating signals, sampling requirements, and …

Target Control Of Networked Systems, Isaac S. Klickstein

Mechanical Engineering ETDs

The control of complex networks is an emerging field yet it has already garnered interest from across the scientific disciplines, from robotics to sociology. It has quickly been noticed that many of the classical techniques from controls engineering, while applicable, are not as illuminating as they were for single systems of relatively small dimension. Instead, properties borrowed from graph theory provide equivalent but more practical conditions to guarantee controllability, reachability, observability, and other typical properties of interest to the controls engineer when dealing with large networked systems. This manuscript covers three topics investigated in detail by the author: (i) the …

Optimal Relay Location In A Microgrid Using Optimization Techniques, Benjamin J. Reimer

Electrical and Computer Engineering ETDs

This thesis paper proposes an optimal relay placement approach for microgrids. The algorithm separately calculates the System Average Interruption Frequency Index (SAIFI) of a microgrid in both grid-connected and islanded microgrid modes. The objective is to find the optimal relay locations such that the microgrid overall SAIFI is minimized. The power electronics interfaces associated with distributed energy resources may be classified as grid following or grid forming. As opposed to grid-following distributed energy resources (DERs) such as typical solar inverters, grid-forming inverters can control the microgrid voltage and frequency at the point of their interconnection. Therefore, these DERs can facilitate …

Optimization Of Vehicle To Grid System In A Power System With Unit Commitment, Charles Uko

Theses and Dissertations

This thesis provides a comprehensive overview and analysis of the benefits of using plug-in electric vehicles (PEVs) in solving the unit commitment problem. PEVs are becoming more attractive and a rapid replacement of conventional fuel vehicles due to their environmental-friendly operation. Through collective control by an aggregator, PEVs batteries can also provide ancillary services such as load leveling and frequency regulation to improve the quality of power supplied in the power grid and reduce the cost of power generation. This study presents the modeling, simulation, and analysis of a vehicle-to-grid (V2G) system connected to a smart power grid. The model …

Golng Off The Grid: Optimizing Solar Renewable Energy Systems At Remote Locations To Minimize Logistics Requirements, Increase Sustainability, And Strengthen Energy Assurance, Nathanael J. Thomsen

Theses and Dissertations

Grid-based electrical infrastructure is unavailable at many remote locations including developing nation communities, isolated construction sites, and military contingency bases. Powering these locations with diesel generators requires regular fuel resupply, resulting in increased costs, environmental impacts, and burdensome logistics—making generators an obstacle for energy resiliency and sustainability. This research examines using solar renewable energy systems to replace generators at remote locations and presents a multi-objective optimization model that minimizes logistics variables. Replacing a single deployed generator would save over 500,000 gal of fuel annually, eliminating the need for 100 fuel tanker deliveries.