Engineering Commons^™

Pseudo-Ductile 3d Printed Fiber Reinforced Polymer Composites, Shreya Vemuganti

Civil Engineering ETDs

The use of fiber-reinforced polymer (FRP) composite materials is continuously growing in civil infrastructure owing to its high strength, low weight, and manufacturing flexibility. However, FRP is characterized by sudden failure and lacks ductility. When used in construction, gradual failure of FRP components is desired to avoid catastrophic structural collapse. Due to its mechanical orthotropy, the behavior of FRP relies significantly on fiber orientation and stacking sequence. In this research proposal, investigations showed that novel multi-angled glass fiber reinforced polymer (GFRP) composites with varying fiber orientation angles, stacking sequence, and thickness of laminas can be designed and fabricated using 3D …

Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield

All Undergraduate Projects

What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …

Hydronic Service Valve Product Development, Mark Hunsaker

Construction Management

Since the inception of modern mechanical and HVAC systems, maintenance and repairs have been prevalent in both contracting and facility operations. The average life of HVAC equipment is fractional compared to the life of buildings as construction technologies improve. Traditionally, the serviceability of heating and cooling equipment has entailed the significant amounts of labor and materials to disruptively drain or freeze hydronic systems in order to cut in means of bypassing the main system, swapping out equipment, or repair. The intent of this project is to explore alternative methods to forgo the aforementioned negative impacts of service and to improve …

Adapting To Extreme Heat: Social, Atmospheric, And Infrastructure Impacts Of Air Conditioning In Megacities - The Case Of New York City, Harold Gamarro

Dissertations and Theses

Extreme heat events are becoming more frequent and intense in most large cities. Built-up surfaces also limit cooling mechanisms, leading to warmer conditions in cities, a phenomenon called the Urban Heat Island (UHI). This presents major challenges to reduce adverse health effects of hot weather, particularly in vulnerable populations like the elderly and low-income communities. Here we explore the overall impacts of increasing air conditioning (AC) system adoption in residences as an adaptive measure to reduce human health risks under heat waves, with New York City (NYC) as a case study. This study uses AC adoption data from the 2017 …

Synthesis & Characterization Of Polymer-Modified Calcium Silicate Hydrate For Wellbore Applications, Jeremy J. Starr

Civil Engineering ETDs

Calcium Silicate Hydrate (C-S-H) acts as the primary binding material that is mainly responsible for the strength and durability of concrete. C-S-H constitutes approximately 67% of hydrated ordinary Portland cement by volume. C-S-H forms with a range of stoichiometric formula dependent on many factors such as CaO/SiO₂ ratio. The continued rise of hydrocarbon exploration in the United States has developed the need for improved wellbore cementing materials. Binders with good bond strength to steel and rock interfaces, low shrinkage, and high cracking strength are sought by the oil and gas industry. The incorporation polymers and nano materials has evolved …

Evaluating Measurement Of Strain Hardening Method For Mechanical Assessment Of Geomembrane Service Life In Msw Landfills, Alaa Alsharaballi

Theses and Dissertations

The increased household production result in more construction of municipal solid waste (MSW) landfills and lagoons. One major part of these engineering projects is high-density polyethylene (HDPE) geomembrane. Geomembrane is an impermeable layer that used along bottom and sides of landfills and lagoons to contain the leachate and to protect the groundwater. Although of their chemicals resistance and high strength, it can be aged under service conditions such as high temperature, ultraviolet (UV) light, and chemicals exposure. These conditions accelerate oxidation of geomembrane and lead to brittle behavior and stress cracking which reduce its service life.

Our objective in this …

Cal Poly Engineering East – Building 20, A Critical Analysis Of Mechanical Needs And Distribution Of Mechanical Resources, Rhea Bae

Construction Management

Older buildings on the Cal Poly campus need renovation, particularly with the heating, ventilation, air-conditioning (addressed as HVAC) systems in the classrooms. The HVAC units within the old buildings are obsolete, inefficient, and are most likely due for replacement. The Engineering East building, also known as Building 20, is an example of a campus building that requires a quality HVAC system. By upgrading the HVAC, the building conditions can be positively enhanced through better cooling and ventilation, allowing students in the labs and classrooms to have a better experience within the building. This paper details the methodology behind installing a …

Ghana Clean Water Initiative – Risk Management, Mason Nolan

Construction Management

In August of 2019 several Cal Poly Students will be traveling to a remote fishing village located off of Lake Volta in Ghana. This project is being completed by Cal Poly's MCAA chapter alongside the NECA chapter. These students will be constructing a community center, a water filtration system, and ice making and refrigeration facilities. The project will rely heavily on solar power as there is no grid in the village the project is taking place in. This project inherently has many risks associated with it and needs a risk management plan to combat these risks. The three ways these …

The Setty Family Foundation 2018 Ashrae Applied Engineering Competition, Joshua Heath

Construction Management

The Setty Family Applied Engineering Challenge tasked my project group with designing a temporary shelter specifically for refugees in Eastern Europe to be used by governments, municipalities, and humanitarian agencies that is cost effective, portable, sustainable, and provides all necessary domestic needs. After months of research and design, we have developed the PolyShelter ; an eight-person structure erected to provide comfortability and safety to those in need. PolyShelter is designed to withstand the harshest of climates, provide exceptional insulation, and incorporate a rainwater collection system sufficient enough to support each unit. PolyShelter proves itself to be an economically viable solution …

Understanding Geopolymerization Process For Enhancement Of Mechanical Properties Of Fly Ash Based-Geopolymer Concrete, Lateef Najeh Assi

Theses and Dissertations

Concrete is a major construction material that is largely made up of cement. Unfortunately, the manufacturing process for the cement currently used to produce concrete releases a great deal of CO2, which endangers the environment. Hence, finding alternatives to ordinary Portland cement is of extreme importance. The intellectual contribution of this dissertation is the development of an improved understanding of the geopolymerization process so that the compressive strength of cement can be maximized while the need for external heating is minimized. The intent is to create a substance to replace commonly used cement without sacrificing other beneficial properties. The first …

An Analysis Of The Benefits In Estimating At Different Pipe Union Labor Rates, A.J. Chamorro

Construction Management

This paper is an analysis of the costs and benefits of estimating at different union labor rates, based on the location of the project and which jurisdiction the project falls in. The basis of the research is a case study of a Bay Area mechanical contractor (Contractor X) which previously estimated at a single labor rate, and recently developed variable estimating. Through that case study, best practices are developed for union pipe trade estimating. The results of the case study show that estimating protocol should be determined on a project by project basis, and company resources and manpower have to …