Engineering Commons^™

Surface Wetting And Friction Studies Of Nano-Engineered Surfaces On Copper Substrate, Julius Sheldon Morehead

Graduate Theses and Dissertations

Nano-engineered-textures on a material surface can dramatically improve the wetting and non-wetting properties of a surface, and they also show promise to address friction issues that affect surfaces in contact. In this work, aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) was used to produce nano-textures on copper (Cu) substrates. A study was performed to examine the effects of changing the annealing conditions and a-Si thickness on nano-texture formation. The creation of various nano-topographies and chemically modifying them using octafluorocyclobutane (C4F8) was performed to control hydrophilicity, hydrophobicity, and oil affinity of nano-textured surfaces. A video-based contact angle measurement system was used …

Influence Of Recycled Asphalt Shingles On Asphalt Binder Content, Mixture Stiffness, And Laboratory Rutting Performance, Joshua David King

Graduate Theses and Dissertations

Recycled asphalt shingles (RAS) is a technology in which pavement costs can be reduced significantly and pavement properties may be enhanced. Also, incorporating shingles into pavements reduces the impacts of waste shingles in landfills, preserving our environment. However, for this new technology to be practical for implementation, a better understanding of how the ground shingles affect the properties of the asphalt is necessary. The purpose of this research was to examine the effects of recycled asphalt shingles on asphalt binder content, mixture stiffness, and laboratory rutting performance. For this project, shingles were added to hot mix asphalt mixtures at 2.5, …

Removal Of Disinfection By-Product Precursors Using Magnetic Ion Exchange (Miex(R)): The Effects Of Ph And Source Water Variability, Sarah Cousins

Graduate Theses and Dissertations

Disinfection by-products (DBPs) form as an unintended result of drinking water disinfection, from chemical reactions between disinfectants (e.g., free chlorine) and naturally occurring dissolved organic matter (DOM). At present, 11 DBPs are regulated in treated drinking waters due to potential adverse health effects, including four trihalomethanes (THMs). Despite nearly 40 years of DBP research, compliance with DBP regulations remains a challenge for many drinking water treatment plants (DWTPs), including the four DWTPs located on the Beaver Lake Reservoir in Northwest Arkansas. Due to the high net negative surface charge on DOM, anion exchange is one potentially viable method for removing …

The Marked Tree Site: Evaluation Of Geosynthetic Reinforcements In Flexible Pavements, Taylor Mitchell Goldman

Graduate Theses and Dissertations

This document presents findings from a three-year, full-scale, field research project aimed at determining the benefits of using geosynthetic reinforcements to improve the performance of flexible pavements constructed over poor subgrade soils. The test site, known as the Marked Tree site, is an 850-ft (258-m) long segment of low-volume frontage road along Highway 63 in the town of Marked Tree, Arkansas. The site, constructed in 2005, consists of seventeen 50-ft (15.2-m) long flexible pavement test sections with various types of geosynthetic reinforcements (woven and nonwoven geotextiles, and geogrids), which were all positioned at the base-subgrade interface, and two different nominal …

Inventory Models For Intermittent Highly Variable Demand And Policy Parameter Adjustments To Meet Desired Service Level Requirements, Yasin Unlu

Graduate Theses and Dissertations

This dissertation consists of three assays. The first assay examines the robustness of lead time demand models for the continuous review (r;Q) inventory policy. A number of classic distributions as well as distribution selection rules are examined under a wide variety of demand conditions. First, the models are compared to each other by assuming a known demand process and evaluating the errors associated with using a different model. Then, the models are examined using a large sample of simulated demand conditions. Approximation results of inventory performance measures - ready, rate excepted number of backorders and on-hand inventory levels are reported. …

Integrated Planning For Rural Rail Transportation, Jeffrey Cohan Gwaltney

Graduate Theses and Dissertations

Population growth in rural areas has led to new interest in rail transportation. Planning a passenger rail system involves numerous difficult decisions, most representing a trade-off between customer service and cost. In this work, we attempt to integrate many of these planning decisions. We consider strategic decisions such as station location and vehicle procurement, as well as tactical issues that include vehicle scheduling. Our integrated model exploits the linear network structure that best suits many rural American communities, including Northwest Arkansas. Due to the intractability of the integrated rail planning problem, we have developed a customized heuristic approach to solve …

Investigation Of A Floating Load Buck Dc-Dc Switching Converter, Hong Tan

Graduate Theses and Dissertations

A floating load buck DC-DC switching converter was analyzed, simulated, designed and prototyped. The floating load buck converter is first compared to the conventional buck converter. It was found that both the floating load buck converter and conventional buck converter exhibit similar conversion characteristics despite the differences in the placement of their output inductors. A floating load buck converter was designed to be used as a high-voltage off-line light-emitting diodes (LEDs) driver using a Texas Instruments' TPS92001 controller. Finally, the characteristics of this floating load buck converter LED driver were experimentally examined.

Design Of A Low Noise Amplifier For Wireless Sensor Networks, Ting Liu

Graduate Theses and Dissertations

CMOS technology becomes important in Radio Frequency (RF) communication systems which include both a receiver and a transmitter. In a high performance radio receiver, the Low Noise Amplifier (LNA) is the first circuit, and its noise performance dominates the entire receiver. Depending upon the system in which they are used, LNAs can be designed according to various topologies and structures. The LNA needs to have matched input impedance, and at the same time it should amplify the small amplitude input signal without adding too much noise and still have the minimal power consumption. It also needs a good interface with …

Design Of An 866 Mhz On-Chip Frequency Synthesizer, Phaniraj Joshi

Graduate Theses and Dissertations

There is a strong need for stable frequency references with large tuning ranges in today's communication systems. While the crystal oscillators assure good frequency stability, it is not possible to achieve a large frequency range by tuning the passive components attached to them. Frequency synthesizers are usually used for this purpose because of their ability to produce a variety of output frequencies. The Phase Locked Loop (PLL) based frequency synthesizer is the most preferred of all types of synthesizers available because of its additional features like programmability, low noise and low cost as well as high accuracy and stability. The …

Adaptive Intensity Modulated Radiation Therapy Planning Optimization With Changing Tumor Geometry And Biology Enforcing Both Cumulative And Fraction Size Dose Constraints, Behlul Saka

Graduate Theses and Dissertations

Intensity Modulated Radiation Therapy (IMRT) is a modern technique of delivering radiation treatments to cancer patients. In IMRT technology, intensities must be chosen for the many small unit grids into which the beams are divided to produce a desired distribution of dose at points throughout the body with the goal of maximizing dose delivered to the tumor while sparing healthy tissues from excessive radiation and keeping dose homogeneous across the tumor. Although IMRT plans are optimized as a single overall treatment plan, they are delivered over 30-50 treatment sessions (fractions) and both cumulative and per-fraction dose constraints apply. The extended …

Gesn Devices For Short-Wave Infrared Optoelectronics, Benjamin Ryan Conley

Graduate Theses and Dissertations

The electronics industry has a large silicon infrastructure for the manufacture of complementary-metal oxide semiconductor (CMOS) based electronics. The increasing density of Si based circuits has set a pace that is now pushing the physical limits of connectivity between devices over conventional wire based links. This has driven the increasing interest in Si based optoelectronics and to use the groundwork already established by the electronics industry for lower cost optical communications. The greatest limitation to this effort has been the incorporation of a Si based laser, which requires integration of a direct bandgap material within this CMOS process.

The Ge1-xSnx …

Fabrication Of Horizontal Silicon Nanowires Using A Thin Aluminum Film As A Catalyst, Khaja Hafeezuddin Mohammed

Graduate Theses and Dissertations

Silicon nanowires have been the topic of research in recent years for their significant attention from the electronics industry to grow even smaller electronic devices. The semiconductor industry is built on silicon. Silicon nanowires can be the building blocks for future nanoelectronic devices. Various techniques have also been reported in fabricating the silicon nanowires. But most of the techniques reported, grow vertical silicon nanowires. In the semiconductor industry, integrated circuits are designed and fabricated in a horizontal architecture i.e. the device layout is flat compared to the substrate. When vertical silicon nanowires are introduced in the semiconductor industry, a whole …

The Role Of Thermally-Induced Geometrical Changes In Temperature Trending Of Railroad Tapered Roller Bearings, Andrei G. Vaipan

Theses and Dissertations - UTB/UTPA

The understanding of the phenomenon of temperature trending of railroad tapered roller bearings is of paramount importance to the railroad industry. The problem that this poses to the industry is that it leads to false alarms triggered by wayside detectors, which forces the premature removal of defect-free bearings. This thesis provides more insight into this phenomenon and answers questions regarding the importance of key tapered roller bearing components geometry and geometrical changes during temperature trending events. In this study, dynamic experiments conducted in the laboratory have represented the primary method of testing bearing temperature trending. The experimental results are brought …

Location-Aware Traffic Management On Mobile Phones, Sarath Krishna Mandava

Graduate Theses and Dissertations

The growing number of mobile phone users is a primary cause of congestion in cellular networks. Therefore, cellular network providers have turned to expensive and differentiated data plans. Unfortunately, as the number of smartphone users keeps increasing, changing data plans only provides a temporary solution. A more permanent solution is offloading 3G traffic to networks in orthogonal frequency bands. One such plausible network is open Wi-Fi, which is free by definition. As Wi-Fi networks become ubiquitous, there are several areas where there is simultaneous Wi-Fi and 3G coverage. In this thesis, we study the feasibility of offloading 3G traffic to …

Proteome Based Development Of Novel Affinity Tail For Immobilized Metal Affinity Chromatography And Hydrophobic Interaction Chromatography, Neha Tiwari

Graduate Theses and Dissertations

At industrial scale, reducing the step in purification and recovery is desired; this not only decreases the cost but also increases the yield. Hydrophobic Interaction Chromatography (HIC) and Immobilized Metal Affinity Chromatography (IMAC) both are not harsh on biological structure or activity of proteins; also both the techniques are economical and therefore a suitable choice at industrial level. This dissertation comprises of three parts. Purpose for the Part I was to identify and characterize Escherichia coli proteins which display affinity towards both IMAC and Hydrophobic Interaction Chromatography (HIC). Co (II) IMAC was chosen as the primary capture step, followed by …

Development Of A Structured Concrete Thermocline Thermal Energy Storage System, Bradley M. Brown

Graduate Theses and Dissertations

The past couple of decades have shown a concern when considering the way the world obtains its power. The focus has been switching from fossil fuels that have been used for hundreds of years to renewable energy sources, such as the sun. Solar energy is readily and infinitely available for harnessing. One problem with solar energy, though, is its inability to be used during the night time and during cloud covered weather. A solution to this problem is the use of energy storage mechanisms. For solar plants that use solar thermal energy (concentrating solar power plants), thermal energy storage (TES) …

Degradation Of Polystyrene Foam Under Radiant Heat Flux, James Butler

Graduate Theses and Dissertations

As the demand for liquefied natural gas has increased, safety concerns about the performance of transport vessels under fire conditions have been raised. Current codes for the sizing of the pressure relief systems require that the vessels are able to withstand an emmissive heat flux of 108kW/m2 and do not take into account the effects of insulation loss due to thermal decomposition of the insulation materials. To address this possible oversight in the current code models were presented to a working group organized by the Society of International Gas Tanker and Terminal Operators Ltd. focusing on the decomposition rate of …

Improvements On Just-About-Right (Jar) Scales As Product Optimization Tools Using Kano Modeling Concepts, Bangde Li

Graduate Theses and Dissertations

Attribute Kano characteristics are useful in product design to prioritize development efforts. However, attribute Kano characteristics have not been discussed and applied to product optimization when using Just-About-Right (JAR) scales. Product optimizations without identifying attributes Kano characteristics can be misleading. The two objectives in this research were: 1. Determine attribute Kano categories using a modified classic Kano classification methodology. 2. Propose a method to measure attribute performance and identify attribute Kano characteristics to direct product optimization. Two methodologies of attribute Kano classification were investigated. In experiment one, a modified classic Kano methodology was employed to determine attribute Kano categories through …

Water Quality Trends For Section 319 Priority Watersheds In Northwest Arkansas, 1997-2010, Bryan William Bailey

Graduate Theses and Dissertations

Northwest Arkansas contains two Section 319 Priority Watersheds that the Arkansas Natural Resources Commission (ANRC) has identified as being impacted by point and nonpoint sources of pollution (i.e., phosphorus, nitrogen, and sediment), and the Arkansas Water Resources Center (AWRC) has monitored the water quality at several sites within these watersheds. Water-quality data has been collected over the last decade within the Illinois River Watershed (HUC #11110103) and the Upper White River Basin (Beaver Reservoir HUC# 11010001), each watershed containing three sampling sites. The Illinois River Watershed sites are located on the Illinois River, Osage Creek, and Ballard Creek, and the …

Modeling And Characterization Of P-Type Silicon Carbide Gate Turn Off Thyristors, Osama Shihadeh Saadeh

Graduate Theses and Dissertations

Silicon carbide (SiC) power semiconductor devices have emerged in the past decade as the most promising technology for next generation power electronic applications ranging for electric vehicles to grid-connected power routing and conversion interfaces. Several devices have been developed, and even some have been released commercially, including diodes, MOSFETs, JFETs, thyristors, gate turn-off thyristors, and IGBTs. The model development, characterization and experimental validation of SiC p-type Gate Turn-off Thyristors (GTO) is presented in this work. The GTO device in this work is being used as part of a SiC-based solid-state fault current limiter under development at the University of Arkansas' …

Fabrication Of Composite Nanomaterials For Thin Film Amorphous Silicon Solar Cells, Benjamin Seth Newton

Graduate Theses and Dissertations

A material with the precise combination of amorphous silicon and polycrystalline silicon would be able to take advantage of the high absorption capabilities of amorphous silicon and the electron transport capabilities of polycrystalline silicon. Polycrystalline nanostructures in the form of wires can also take advantage of other properties of light absorption, trapping and scattering inherent in nanowire structures. These properties of high absorption and electron transport in one device would lead to advances in the search for highly efficient low cost solar cells and sensors. In this work a thin film material composed of an array of polycrystalline silicon nanostructures …

Development Of Spray Cooling For High Heat Flux Electronics, Jeremy Scott Junghans

Graduate Theses and Dissertations

The thermal demands of modern day electronic systems require innovative thermal solutions. Spray cooling has proven to be able to cool heat fluxes orders of magnitude higher than traditional cooling methodologies. This work includes a comparison of spray cooling to standard thermal management methodologies. Key system parameters and considerations are discussed. The properties of available packaging materials and their effect on the reliability of a spray cooled system are presented. Parameters such as fluid temperature, droplet size, fluid velocity and flow rate all directly impact performance and are detailed in this work. Finally, results from of a wide range of …

Photodetectors And Photovoltaic Devices Based On Semiconductor Nanomaterials, Jiang Wu

Graduate Theses and Dissertations

Photodetectors based various nanostructures and plasmon enhanced solar cells are investigated in this dissertation. The motivation of the dissertation rise is driven by urgent need of both high efficiency photodetectors and solar cells.

First, quantum dot infrared photodetectors have been intensely investigated due to their promise in high performance photodetectors. However, the strain-driven growth of quantum dots has hindered the progress of quantum dot photodetectors. The presence of strain in the device presents complexity in designing as well as defects. Therefore, in this project, new designs of quantum dot photodetector structures are presented to improve the control over detection wavelength. …

Hydroclimatic Forecasting In The Western United States Using Paleoclimate Reconstructions And Data-Driven Models, Christopher Allen Carrier

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis investigated climate variability and their associated hydrologic responses in the western United States. The western United States faces the problem of water scarcity, where the management and mitigation of available water supplies are further complicated by climate variability. Climate variability associated with the phases of oceanic-atmospheric oscillations has been shown to influence streamflow and precipitation, where predictive relationships have led to the possibility of producing long-range forecasts. Based on literature review, four oceanic-atmospheric oscillation indices were identified in having the most prominent influence over the western United States including the El Niño - Southern Oscillation (ENSO), Pacific Decadal …

Spectroscopic Methods Of Process Monitoring For Safeguards Of Used Nuclear Fuel Separations, Jamie Lee Warburton

UNLV Theses, Dissertations, Professional Papers, and Capstones

To support the demonstration of a more proliferation-resistant nuclear fuel processing plant, techniques and instrumentation to allow the real-time, online determination of special nuclear material concentrations in-process must be developed. An ideal materials accountability technique for proliferation resistance should provide nondestructive, realtime, on-line information of metal and ligand concentrations in separations streams without perturbing the process. UV-Visible spectroscopy can be adapted for this precise purpose in solvent extraction-based separations.

The primary goal of this project is to understand fundamental URanium EXtraction (UREX) and Plutonium-URanium EXtraction (PUREX) reprocessing chemistry and corresponding UV-Visible spectroscopy for application in process monitoring for safeguards. By …

Analysis And Design Of An Anisotropic, Compliant Suspension Component, Samantha Jean Salinas

Theses and Dissertations - UTB/UTPA

A steering pad on a train is meant to reduce the force on the wheel while moving along a curve in the rail. A new steering pad was desired with properties tuned for a new suspension system design. An anisotropic, compliant pad was designed for a specific stiffness anisotropy, 20:1. Finite element analysis was performed on various models as a guide to designing a pin with the desired stiffness ratio. A design was chosen for a prototype made of thermoset polyurethane, a similar material to that currently used. Experiments were performed on the prototype pad model to determine vertical and …

An Investigation Into Temperature Trending In Railroad Tapered Roller Bearings Through Vibration Monitoring Techniques, Rafael Kristian Maldonado

Theses and Dissertations - UTB/UTPA

A series of laboratory experiments have been conducted at The University of Texas-Pan American to investigate the cause of bearing “temperature trending.” A combination of theoretical and experimental studies has identified potential sources for the abrupt changes in temperature often seen in railroad bearings. Previous studies suggest the possibility of vibration induced roller misalignment as the root cause for temperature trending. Subsequent research conducted by the UTPA team was designed to provide evidence through vibration monitoring techniques for the proposed hypothesis. To that end, a dynamic bearing tester was used to run four bearings at various speeds and loads experienced …

Application Of The Empirical Mode Decomposition On The Characterization And Forecasting Of The Arrival Data Of An Enterprise Cluster, Linh Bao Ngo

Graduate Theses and Dissertations

Characterization and forecasting are two important processes in capacity planning. While they are closely related, their approaches have been different. In this research, a decomposition method called Empirical Mode Decomposition (EMD) has been applied as a preprocessing tool in order to bridge the input of both characterization and forecasting processes of the job arrivals of an enterprise cluster. Based on the facts that an enterprise cluster follows a standard preset working schedule and that EMD has the capability to extract hidden patterns within a data stream, we have developed a set of procedures that can preprocess the data for characterization …

Subthreshold 3 Phase Mixers, Jesus Angel Torres

Theses and Dissertations - UTB/UTPA

This thesis will discuss subthreshold FET mixers with a focus on conversion loss derivations. To begin understanding the mixers, a look into the FET model is first taken in Chapter II. Then in Chapter III, a single FET device mixer is studied and its conversion loss is found from its small-signal model. The chapter will then include a two FET device mixer and a four device FET mixer. Finally a new type of mixer will be discussed in Chapter IV. The new type of mixer is a 3 phase mixer with the phase angles being 0°, 120°, and 240°. The …

The Evaluation And Analysis Of The Impact Of Variability On The Twelve Workstation Factory, Hernando Garrido

Theses and Dissertations - UTB/UTPA

Presently, there is theory and work examples about factory performance presented in the book ―Optimizing factory Performance‖ by James Ignizio, Ph.D. The theory explains how to determine performance using three fundamental equations by considering the impact and propagation of variability through a 12-Workstation Factory Model, and a number of its variations. The objective of developing a simulation model was to serve as a tool for instructors to illustrate the impact and propagation of variability in the manufacturing industry and to investigate phenomena (i.e., time to reach steady state, impact of variability) in the three dimensions of manufacturing. The validation of …