Engineering Commons^™

Fea Methodology For System-Level Redundancy Evaluation: Application To Non-Composite Steel Bridges, Francisco Javier Bonachera Martin

Open Access Dissertations

Currently, all steel bridges with members designated as Fracture Critical Members (FCMs) are required to undergo hands-on inspections every 24 months. A FCM is a primary steel tension member (or portion of) which failure results in collapse or loss of serviceability of a bridge. However, presently, there are no codified procedures used to evaluate system-level redundancy in steel bridges. In this dissertation, finite element analysis (FEA) procedures, techniques and inputs were researched in order to develop bridge models that account for the mechanisms that lead to redundant capacity after the failure of a primary steel member. These mechanisms include partial …

The Effects Of Chloride-Based Deicing Chemicals On Degradation Of Portland Cement Mortars With Alkali Reactive Aggregate, Charles Yicheng Chiu

Open Access Dissertations

The assessment of the influence of deicing chemicals on alkali reactivity of aggregates is still an area of active research, particularly with respect to the combined effects of long-term exposure to deicers, freezing and thawing cycles, and wetting and drying cycles. In order to develop a more comprehensive view of these topics, the present study was conducted in three phases. The focus of the first phase was on studying the effects of the chloride-based deicers on the alkali silica reaction (ASR) using accelerated test methods (i.e. the test was performed at high temperature (80 °C) as per modified ASTM C1260). …

The Association Between Tolerance For Ambiguity And Fear Of Negative Evaluation: A Study Of Engineering Technology Capstone Courses, Sergey I. Dubikovsky

Open Access Dissertations

For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These truly integrative design activities do not have a single “correct” solution. Instead, there is an array of solutions, many of which could be used to achieve the final result. This ambiguity can cause students to experience anxiety during the projects.

This study examined the main topics: • …

Thermomechanical Properties Of Novel Lanthanum Zirconate Based Thermal Barrier Coatings - An Integrated Experimental And Modeling Study, Xingye Guo

Open Access Dissertations

Thermal barrier coatings (TBCs) are refractory materials deposited on gas turbine components, which provide thermal protection for metallic components at operating conditions. The current state-of-art TBC material is yttria-stabilized zirconia (YSZ), whose service temperature is limited to 1200 celsius, due to sintering and phase transition at higher temperatures. In comparison, lanthanum zirconate (La2Zr2O7, LZ) has become a promising candidate material for TBCs due to its lower thermal conductivity and higher phase stability compared to YSZ.

The primary objective of this thesis is to design a novel robust LZ-based TBC system suitable for applications beyond 1200 celsius. Due to LZ’s low …

Interplanetary Mission Design With Applications To Guidance And Optimal Control Of Aero-Assisted Trajectories, Peter J. Edelman

Open Access Dissertations

A method for finding optimal aerogravity-assist tours of the solar system is developed using indirect methods. Two cost functionals are used in the optimization; finding the minimum required maximum lift-to-drag ratio, with and without a convective heating-rate path constraint, and the path which provides the minimum total stagnation point convective heat load. It is found that using present or near-future thermal protection system materials will suffice for certain aerogravity assist trajectories at Mars. Minimum heat load optimal trajectories are found for aerocapture maneuvers at Uranus and Neptune. With a large radius, and short rotational periods, atmospheric rotation must be taken …

Statistical Modeling And Simulation Of Variability And Reliability Of Cmos Technology, Khaled Hassan Md

Open Access Dissertations

The introduction of High-κ Metal Gate transistors led to higher integration density, low leakage current, and faster switching speed. However, this transition in technology roadmap brought about new failure mechanisms such as Positive Bias Temperature Instability and Stress Induced Leakage Current. In addition, the relentless downscaling of devices to keep up with Moore's law has significantly increased the time-zero variability caused by Random Dopant Fluctuation, Mean Gate Length Deviation, and Line Edge Roughness. Because of their possible correlation with time dependent aging effects, the quantification of reliability has become more complex than ever. To that effect, we propose a framework …

Two-Dimensional Electronics And Optoelectronics: From Materials Syntheses To Device Applications, Yexin Deng

Open Access Dissertations

The current research on semiconductor device has pushed the scaling of the devices into sub-10 nanometers (nm) regime. While most of the current devices are made on silicon germanium, and III-V materials, people are looking for new materials for use in novel semiconductor devices: either for use in extremely scaled device in sub-10 or even sub-5 nm devices, or for use in other situations such as flexible electronics or low power and lower cost IoT (Internet of Things) applications.

Two-dimensional (2D) materials have attracted extensive research interests in their physical, chemical and mechanical properties.Since the discovery of graphene, which a …

Gravity-Assist Trajectories To Venus, Mars, And The Ice Giants: Mission Design With Human And Robotic Applications, Kyle M. Hughes

Open Access Dissertations

Gravity-assist trajectories to Uranus and Neptune are found (with the allowance of impulsive maneuvers using chemical propulsion) for launch dates ranging from 2024 to 2038 for Uranus and 2020 to 2070 for Neptune. Solutions are found using a patched conic model with analytical ephemeris via the Satellite Tour Design Program (STOUR), originally developed at the Jet Propulsion Laboratory (JPL). Delivered payload mass is computed for all solutions for select launch vehicles, and attractive solutions are identified as those that deliver a specified amount of payload mass into orbit at the target body in minimum time. The best cases for each …

New Marked Point Process Models For Microscopy Images, Dae Woo Kim

Open Access Dissertations

In developing new materials, the characterization of microstructures is one of the key steps. To characterize the microstructure, many microscope modalities have been devised and improved over decades. With the increase in image resolution in the spatial and time domains, the amount of image data keeps increasing in the fields such as materials science and biomedical engineering. As a result, image processing plays a critical role in this era of science and technology. In materials image analysis, image segmentation and feature detection are considered very important.

The first part of this research aims to resolve the segmentation problem caused by …

Examination And Utilization Of Rare Features In Text Classification Of Injury Narratives, Hsin-Ying Huang

Open Access Dissertations

Thanks to the advances in computing and information technology, analyzing injury surveillance data with statistical machine learning methods has grown in popularity, complexity, and quality over recent years. During that same time, researchers have recognized the limitations of statistical text analysis with limited training data. In response to the two primary challenges for statistical text analysis, dimensionality reduction and sparse data, many studies have focused on improving machine learning algorithms. Less research has been done, though, to examine and improve statistical machine learning methods in text classification from a linguistic perspective.

This study addresses this research gap by examining the …

Evaluating The Performance Of Passive Chilled Beams With Respect To Energy Efficiency And Thermal Comfort, Janghyun Kim

Open Access Dissertations

Existing modeling approaches for passive chilled beams determined from tests on individual chilled beams in a laboratory are not adequate for assessing overall energy usage and occupant comfort within building simulation programs. In addition, design guidelines for passive chilled beam systems are needed for identifying appropriate applications and optimal configurations. This thesis includes (i) extensive experimental studies for characterizing the performance of passive chilled beams, in both laboratory settings and in field studies, (ii) development of passive chilled beam performance prediction models, (iii) integration of these models into building simulation models/tools and (iv) use of building simulation for overall assessment …

Fast Time- And Frequency-Domain Finite-Element Methods For Electromagnetic Analysis, Woochan Lee

Open Access Dissertations

Fast electromagnetic analysis in time and frequency domain is of critical importance to the design of integrated circuits (IC) and other advanced engineering products and systems. Many IC structures constitute a very large scale problem in modeling and simulation, the size of which also continuously grows with the advancement of the processing technology. This results in numerical problems beyond the reach of existing most powerful computational resources. Different from many other engineering problems, the structure of most ICs is special in the sense that its geometry is of Manhattan type and its dielectrics are layered. Hence, it is important to …

Plasmonic Devices Based On Transparent Conducting Oxides For Near Infrared Applications, Kim Jongbum

Open Access Dissertations

In the past decade, there have been many breakthroughs in the field of plasmonics and nanophotonics that have enabled optical devices with unprecedented functionalities. Even though remarkable demonstration of at photonic devices has been reported, constituent materials are limited to the noble metals such as gold (Au) and silver (Ag) due to their abundance of free electrons which enable the support of plasmon resonances in the visible range. With the strong demand for extension of the optical range of plasmonic applications, it is now a necessity to explore and develop alternative materials which can overcome intrinsic issues of noble metals …

Device Design Factors For Enhancing The Functionality Of Chronic Intracortical Microelectrodes, Heui Chang Lee

Open Access Dissertations

Intracortical microelectrodes are devices used in brain-computer interfaces (BCI) to help regain lost motor, sensory, and cognitive functions of individuals with neurological disorders. However, the long-term performance of microelectrode arrays is hampered by a series of inflammatory tissue responses. The consequence of the inflammatory response is the formation of a dense astroglial sheath around the vicinity of the electrode, impeding the electrical conduction between the electrode and neurons. Furthermore, due to the cascade of neuroinflammatory events, the number of neurons is significantly reduced near the electrode, manifested by decrease in signal-to-noise ratio (SNR) and the yield of electrodes. Over time, …

Modifying Burning Rate And Agglomeration Size In Aluminized Composite Solid Propellants Using Mechanically Activated Metals, Hatem Mohamed Belal

Open Access Dissertations

Agglomeration reduction techniques are important field in solid propellant industry, Large agglomeration results in excessive two phase losses. Tailored composite particles has been applied to tailor aluminum particle ignition and combustion. In this research, mechanical activated aluminum magnesium powders are synthesized, tested in both laser ignition using CO2 and propellant. Prepared powders categorized into particle size that suitable for propellant application. Laser ignition tests showed that the prepared powder are more reactive than magnalium which has the same Al:Mg weight ratio. Agglomeration capturing showed that the prepared powder produce much less than neat aluminum or even similar physical mixture of …

Observability And Observer Design For Switched Linear Systems, Scott C. Johnson

Open Access Dissertations

Hybrid vehicles, HVAC systems in new/old buildings, power networks, and the like require safe, robust control that includes switching the mode of operation to meet environmental and performance objectives. Such switched systems consist of a set of continuous-time dynamical behaviors whose sequence of operational modes is driven by an underlying decision process. This thesis investigates feasibility conditions and a methodology for state and mode reconstruction given input-output measurements (not including mode sequence). An application herein considers insulation failures in permanent magnet synchronous machines (PMSMs) used in heavy hybrid vehicles.

Leveraging the feasibility literature for switched linear time-invariant systems, this thesis …

What Broke Where For Distributed And Parallel Applications — A Whodunit Story, Subrata Mitra

Open Access Dissertations

Detection, diagnosis and mitigation of performance problems in today's large-scale distributed and parallel systems is a difficult task. These large distributed and parallel systems are composed of various complex software and hardware components. When the system experiences some performance or correctness problem, developers struggle to understand the root cause of the problem and fix in a timely manner. In my thesis, I address these three components of the performance problems in computer systems. First, we focus on diagnosing performance problems in large-scale parallel applications running on supercomputers. We developed techniques to localize the performance problem for root-cause analysis. Parallel applications, …

Hydrodynamics Of Swimming Microorganisms In Complex Fluids, Gaojin Li

Open Access Dissertations

Swimming motion of microorganisms, such as spermatozoa, plankton, algae and bacteria, etc., ubiquitously occurs in nature. It affects many biological processes, including reproduction, infection and the marine life ecosystem. The hydrodynamic effects are important in microorganism swimming, their nutrient uptake, fertilization, collective motions and formation of colonies. In nature, microorganisms have evolved to use various fascinating ways for locomotion and transport. Different designs are also developed for the locomotion of artificial nano- and microswimmers. In this study, we use several different computational models to investigate the behavior of microswimmers.

Microorganisms typically swim in the low Reynolds number regime, where inertia …

Experimentally Validated 3d Md Model For Afm-Based Tip-Based Nanomanufacturing, Rapeepan Promyoo

Open Access Dissertations

In order to control AFM-based TBN to produce precise nano-geometry efficiently, there is a need to conduct a more focused study of the effects of different parameters, such as feed, speed, and depth of cut on the process performance and outcome. This is achieved by experimentally validating a MD simulation model of nanomachining, and using it to conduct parametric studies to guide AFM-based TBN. A 3D MD model with a larger domain size was developed and used to gain a unique insight into the nanoindentation and nanoscratching processes such as the effect of tip speed (e.g. effect of tip speed …

Impact Of Rfid Information-Sharing Coordination Over A Supply Chain With Reverse Logistics, Juan Jose Nativi Nicolau

Open Access Dissertations

Companies have adopted environmental practices such as reverse logistics over the past few decades. However, studies show that aligning partners inside the green supply chain can be a substantial problem. This lack of coordination can increase overall supply chain cost. Information technology such as Radio Frequency Identification (RFID) has the potential to enable decentralized supply chain coordinate their information. Even though there are research that address RFID on traditional supply chain, few researches address how to coordinate RFID information sharing in a green supply chain. We study, through simulation experiments, two types of RFID information-sharing coordination under different configurations related …

Adaptive Sampling Trust-Region Methods For Derivative-Based And Derivative-Free Simulation Optimization Problems, Sara Shashaani

Open Access Dissertations

We consider unconstrained optimization problems where only “stochastic” estimates of the objective function are observable as replicates from a Monte Carlo simulation oracle. In the first study we assume that the function gradients are directly observable through the Monte Carlo simulation. We propose ASTRO, which is an adaptive sampling based trust-region optimization method where a stochastic local model is constructed, optimized, and updated iteratively. ASTRO is a derivative-based algorithm and provides almost sure convergence to a first-order critical point with good practical performance. In the second study the Monte Carlo simulation is assumed to provide no direct observations of the …

A New Approach To Modeling Aviation Accidents, Arjun Harsha Rao

Open Access Dissertations

General Aviation (GA) is a catchall term for all aircraft operations in the US that are not categorized as commercial operations or military flights. GA aircraft account for almost 97% of the US civil aviation fleet. Unfortunately, GA flights have a much higher fatal accident rate than commercial operations. Recent estimates by the Federal Aviation Administration (FAA) showed that the GA fatal accident rate has remained relatively unchanged between 2010 and 2015, with 1566 fatal accidents accounting for 2650 fatalities. Several research efforts have been directed towards betters understanding the causes of GA accidents. Many of these efforts use National …

Microstructural Evolution During The Homogenization Heat Treatment Of 6xxx And 7xxx Aluminum Alloys, Pikee Priya

Open Access Dissertations

Homogenization heat treatment of as-cast billets is an important step in the processing of aluminum extrusions. Microstructural evolution during homogenization involves elimination of the eutectic morphology by spheroidisation of the interdendritic phases, minimization of the microsegregation across the grains through diffusion, dissolution of the low-melting phases, which enhances the surface finish of the extrusions, and precipitation of nano-sized dispersoids (for Cr-, Zr-, Mn-, Sc-containing alloys), which inhibit grain boundary motion to prevent recrystallization. Post-homogenization cooling reprecipitates some of the phases, changing the flow stress required for subsequent extrusion. These precipitates, however, are deleterious for the mechanical properties of the alloy …

Race, Class And Gender In Engineering Education: A Quantitative Investigation Of First Year Enrollment, Canek Moises Luna Phillips

Open Access Dissertations

Research explanations for the disparity across both race and gender in engineering education has typically relied on a deficit model, whereby women and people of color lack the requisite knowledge or psychological characteristics that Whites and men have to become engineers in sufficient numbers. Instead of using a deficit model approach to explain gender and race disparity, in the three studies conducted for this dissertation, I approach gender and race disparity as the result of processes of segregation linked to the historic and on-going perpetuation of systemic sources of oppression in the United States. In the first study, I investigate …

Characterizing The Effects Of Repetitive Head Trauma In Female Soccer Athletes For Prevention Of Mild Traumatic Brain Injury, Diana Otero Svaldi

Open Access Dissertations

As participation in women’s soccer continues to grow and the longevity of female athletes’ careers continues to increase, prevention of mTBI in women’s soccer has become a major concern for female athletes as the long-term risks associated with a history of mTBI are well documented. Among women’s sports, soccer exhibits the highest concussion rates, on par with those of men’s football at the collegiate level. Head impact monitoring technology has revealed that “concussive hits” occurring directly before symptomatic injury are not predictive of mTBI, suggesting that the cumulative effect of repetitive head impacts experienced by collision sport athletes should be …

Dynamic Holography In Semiconductors And Biomedical Optics, Hao Sun

Open Access Dissertations

Three-dimensional scanning and display are rapidly-advancing new technologies with important commercial drivers such as 3D printing and remote imaging for big data applications. Holography is a natural approach to recording and displaying three-dimensional information because it uses phase-sensitive interferometry to record interference patterns when a reference beam encounters coherent light arriving from an object. The 3D information is contained in the values of wave optics. Holography is a broad field that goes beyond recording and displaying. For instance, holographic optical elements, which take advantage of holographic imaging principles, perform the functions of lenses, gratings or mirrors. Holographic interferometry is also …

Policy Design Tool For Managing Indoor Residential Water Demand In Water-Scarce Regions, Mujahed M. Thneibat

Open Access Dissertations

In view of population growth; climate change; and economic evolution, water resources in numerous parts of the world have reached their natural capacities. Consequently, the ability of many countries to grow; meet the basic needs of inhabitants; and protect the environment will be endangered like never before unless water resources are smartly handled and managed. ^ In the past few decades, many developed and developing countries have suffered from water scarcity, and more are certain to follow. The water security dilemma is much more challenging in developing countries. Water utilities have had to follow regulatory plans to manage demand on …

Fracture Analysis In Biomimetic Bouligand Architectures, Nobphadon Suksanqpanya

Open Access Dissertations

The Bouligand structure, which is found in many biological materials, is a hierarchical architecture that features uniaxial fiber layers assembled periodically into a helicoidal pattern. Many studies have highlighted the high damage-resistant performance of Bouligand structures and its biomimetic materials. One of the outstanding species with the Bouligand structures is the smashing Mantis Shrimp, Odontodactylus Scyllarus, (or stomatopod) due to its capability of generating high speed, high acceleration blows using its raptorial appendage to defeat highly armored preys. The load-bearing part of this appendage, the dactyl club, contains an interior region, which is mainly characterized by the Bouligand structure. This …

Fundamental Studies Of Flame Propagation In Lean-Burn Natural Gas Engines, Zhiyan Wang

Open Access Dissertations

Lean-burn natural gas engines offer enhanced thermal efficiencies and reduced soot and NOx emissions. However, cycle-to-cycle variability in combustion that can result from unreliable ignition, variability in equivalence ratio and quenching is a challenge. Reliability of ignition can be improved by employing a dual-fuel ignition strategy in which a small quantity of diesel fuel is injected to initiate ignition. Computational studies of n-heptane/methane-air mixing layers are performed to provide insight into the fundamental physics of dual-fuel ignition. The results show that the characteristic time required for steady premixed flame propagation has three components: time for autoignition to occur, time for …

Approximate Computing: An Integrated Cross-Layer Framework, Swagath Venkataramani

Open Access Dissertations

A new design approach, called approximate computing (AxC), leverages the flexibility provided by intrinsic application resilience to realize hardware or software implementations that are more efficient in energy or performance. Approximate computing techniques forsake exact (numerical or Boolean) equivalence in the execution of some of the application’s computations, while ensuring that the output quality is acceptable. While early efforts in approximate computing have demonstrated great potential, they consist of ad hoc techniques applied to a very narrow set of applications, leaving in question the applicability of approximate computing in a broader context.

The primary objective of this thesis is to …