Engineering Commons^™

Analysis Of The Interaction Of Two Parallel Surface Cracks, Jeeyeon Hahn

Open Access Dissertations

The objective of this research is to analyze and predict the interaction of surface cracks that occur in parallel planes. Multiple cracks may form in aging aircraft that forms at stress concentrations such as fastener holes and notched components by stress corrosion and fatigue cracking. The lifetime of the structures are significantly affected by the interaction between these cracks. Depending on relative positions and orientations of neighboring cracks, local stress fields and crack driving forces can be affected by the presence of adjacent cracks. Even small subcritical cracks may rapidly grow to a size that will cause failure in service …

Applications Of Femtosecond Coherent Anti-Stokes Raman Scattering In Combustion, Claresta Nicole Dennis

Open Access Dissertations

The dissertation deals with the further development of chirped-probe-pulse femtosecond coherent anti-Stokes Raman spectroscopy (CPP fs-CARS) for applications of gas phase thermometry and extension to methane concentration measurements. The main effort has been to assess the usefulness and robustness of the technique in turbulent combustors of practical interest. A primary aim has been to evaluate the use of CPP fs-CARS for vibrational N₂ thermometry in a highly turbulent environment. It has been suggested that due to the laser beam temporal overlap required for fs-CARS signal generation, the technique would be unsuccessful due to beam propagation retardation effects from density …

Investigation Of Condensed And Early Stage Gas Phase Hypergolic Reactions, Jacob Daniel Dennis

Open Access Dissertations

Traditional hypergolic propellant combinations, such as those used on the space shuttle orbital maneuvering system first flown in 1981, feature hydrazine based fuels and nitrogen tetroxide (NTO) based oxidizers. Despite the long history of hypergolic propellant implementation, the processes that govern hypergolic ignition are not well understood. In order to achieve ignition, condensed phase fuel and oxidizer must undergo simultaneous physical mixing and chemical reaction. This process generates heat, intermediate condensed phase species, and gas phase species, which then may continue to react and generate more heat until ignition is achieved. The process is not well understood because condensed and …

Measurements Of Entropy-Layer Instabilities Over Cone-Ogive-Cylinders At Mach 6, Roger T Greenwood

Open Access Dissertations

Predicting the onset of boundary layer transition is critical in hypersonic flight. To improve transition prediction methods, it is necessary to understand the underlying instability mechanisms that cause transition. Entropy-layer instabilities are of particular interest in the design of blunt reentry vehicles and other blunt supersonic and hypersonic vehicles. Entropy-layer instabilities from outside the boundary layer may enter the boundary layer and have a significant effect on transition. There is little experimental data for entropy-layer instabilities. ^ Experimental measurements of what appear to be entropy-layer instabilities have been made in the Boeing/AFOSR Mach-6 Quiet Tunnel (BAM6QT) using surface pressure transducers …

Measurement Of Combustion Response To Transverse Modes At High Pressure, Matthew Kenneth Wierman

Open Access Dissertations

A two dimensional transverse combustor capable of producing and modulating an unstable flowfield was tested at Purdue. The combustor used an array of coaxial ox-centered shear injector elements. The oxidizer posts were able to be discretely changed in length between tests to investigate different post resonance conditions. A single Study element was placed in the middle of the driven unsteady flowfield so its response could be measured using pressure measurement and high speed imagery. This approach was supported by past testing of the longitudinal Continuously Variable Resonance Combustor and past transverse chambers. Mean flow rates and pressures were fixed across …

Solution To Certain Problems In The Failure Of Composite Structures, Jonathan Goodsell

Open Access Dissertations

The present work contains the solution of two problems in composite structures. In the first, an approximate elasticity solution for prediction of the displacement, stress and strain fields within the m-layer, symmetric and balanced angle-ply composite laminate of finite-width subjected anticlastic bending deformation is developed. The solution is shown to recover classical laminated plate theory predictions at interior regions of the laminate and thereby illustrates the boundary layer character of this interlaminar phenomenon. The results exhibit the anticipated response in congruence with the solutions for uniform axial extension and uniform temperature change, where divergence of the interlaminar shearing stress is …

The Comparison Of Composite Aircraft Field Repair Method (Cafrm) With Traditional Aircraft Repair Technologies, Peng Hao Wang

Open Access Dissertations

In the aviation industry, manufacturers made the transition from aluminum to composite materials for the majority of their primary structures over the last few decades. While the design and manufacturing techniques have consistently evolved, field repair methods were consistently overlooked. In this study, specimens fabricated using some of the common repair methods such as the autoclave repair method, and Double Vacuum Debulk (DVD) repair method were tested against the Composite Aircraft Field Repair Method (CAFRM) proposed by the researcher. Specimens were tested with microscopy, acid digestion, short beam shear, and mode I fracture tests. The researcher was able to determine …

Design, Development, And Testing Of A Conformal Power Control Interface For Thrust Vectoring Aircraft, David Rozovski

Open Access Dissertations

Over the last five years, a new power control inceptor for tiltrotor aircraft, known as the Rotational Throttle Interface (RTI) was designed and built. Prior to the RTI, no tiltrotor inceptor had been able to simultaneously indicate both the direction and magnitude of thrust conformally. The purpose of the RTI is to provide an interface that maps to the intended vehicle response throughout ALL ranges of operation. Doing so is expected to reduce confusion that may have contributed to several tiltrotor accidents

Two tests were conducted with the RTI, one at the NASA Vertical Motion Simulator, and one at Canada's …

Spacecraft Orbit Design In The Circular Restricted Three-Body Problem Using Higher-Dimensional Poincaré Maps, Christopher D. Geisel

Open Access Dissertations

Strategies for designing three-dimensional spacecraft trajectories in a multi-body dynamical environment are investigated using four-dimensional Poincaré maps. Unlike the planar circular restricted three-body problem, where a two-dimensional map provides a simplified view of a portion of the vast and often chaotic design space, the spatial problem requires a four-dimensional map to achieve an equivalent perspective. Such higher-dimensional maps present a visualization challenge. Furthermore, a spacecraft in the spatial problem can exhibit fundamentally more diverse and complex behavior than in the planar problem. A novel approach to four-dimensional-map-based design in the spatial circular restricted three-body problem is developed and applied to …

Scalable Autonomous Operations Of Unmanned Assets, Sunghun Jung

Open Access Dissertations

Although there have been great theoretical advances in the region of Unmanned Aerial Vehicle (UAV) autonomy, applications of those theories into real world are still hesitated due to unexpected disturbances. Most of UAVs which are currently used are mainly, strictly speaking, Remotely Piloted Vehicles (RPA) since most works related with the flight control, sensor data analysis, and decision makings are done by human operators. To increase the degree of autonomy, many researches are focused on developing Unmanned Autonomous Aerial Vehicle (UAAV) which can takeoff, fly to the interested area by avoiding unexpected obstacles, perform various missions with decision makings, come …

Applicability Of Continuum Fracture Mechanics In Atomistic Systems, Shao-Huan Cheng

Open Access Dissertations

By quantitating the amplitude of the unbounded stress, the continuum fracture mechanics defines the stress intensity factor K to characterize the stress and displacement fields in the vicinity of the crack tip, thereby developing the relation between the stress singularity and surface energy (energy release rate G). This G-K relation, assigning physical meaning to the stress intensity factor, makes these two fracture parameters widely used in predicting the onset of crack propagation. However, due to the discrete nature of the atomistic structures without stress singularity, there might be discrepancy between the failure prediction and the reality of nanostructured materials. Defining …

Information Measures For Statistical Orbit Determination, Alinda Kenyana Mashiku

Open Access Dissertations

The current Situational Space Awareness (SSA) is faced with a huge task of tracking the increasing number of space objects. The tracking of space objects requires frequent and accurate monitoring for orbit maintenance and collision avoidance using methods for statistical orbit determination. Statistical orbit determination enables us to obtain estimates of the state and the statistical information of its region of uncertainty given by the probability density function (PDF). As even collision events with very low probability are important, accurate prediction of collisions require the representation of the full PDF of the random orbit state. Through representing the full PDF …