Engineering Commons^™

In Mold Flow Of Long Fibers In Compression Molding Process, Gleb Meirson

Electronic Thesis and Dissertation Repository

Long Fiber Thermoplastics (LFT) are promising new materials with high physical properties and low density. These high properties are obtained by embedding very long fibers (~100 mm) into a thermoplastic matrix. Such a high fiber length dictates the use of a compression molding process for manufacturing as the length of discontinuous fibers in injection molding is limited by pellet length.

LFT composites are of great interest for the automotive industry. These materials are already used in some interior and exterior car parts such as bumpers, seat structures, door module etc. This research is inspired by the desire to manufacture load …

Modelling And Simulation Of The Flexoelectric Effect On A Cantilevered Piezoelectric Nanoplate, Xining Wang

Electronic Thesis and Dissertation Repository

Piezoelectric nanomaterials have attracted increasing attentions due to their distinct electromechanical features, especially the size-dependent properties, which differ greatly from their bulk counterparts.

Due to the large strain gradients presented in nanostructures, the flexoelectricity is believed to be responsible for such size-dependent properties. In this thesis, based on the Kirchhoff plate model and the extended linear piezoelectric theory, a modified continuum mechanics based model is developed to study the size-dependent flexoelectric effect upon the static bending behaviors of a cantilevered piezoelectric nanoplate (PNP). Finite difference method (DFM) is employed to obtain the approximate numerical solutions.

The numerical results indicate that …

Fabrication Of Large Mechanically Flexible Multi-Layered Pdms Optical Devices, Robert S. Green

Electronic Thesis and Dissertation Repository

Mechanically flexible large area polydimethylsiloxane (PDMS) optical devices are fabricated using soft-lithography techniques based on replica moulding. These non-rigid optical devices can be designed as sheets to act as either light concentrators (collectors) or diffusers (illuminators) based on the position and geometry of micro-optical structures (MOSs) embedded within the sheet or imprinted on its surface. The active surface area of the device can range from less than a sq. cm to several sq. m. The performance of the large area optical device is a function of the location and geometry of micro-optical structures, thickness and shape of the flexible waveguide, …

Nanostructured Air Electrodes And Electrochemical Reaction Mechanism Studies For Sodium-Oxygen Batteries, Hossein Yadegari

Electronic Thesis and Dissertation Repository

Alkali metal-O₂ batteries, i.e. Li- and Na-O₂, are considered as the next generation of energy saving technologies with potential application in electric transportation. The high theoretical energy density in these cells is related to the use of high energy alkali metals as negative and oxygen as the positive electrode materials. The performance of alkali metal-O₂ cells is highly dependent on the positive electrode material, where oxygen reduction and evolution reactions take place. Besides, the primary products of oxygen reduction reaction in these cells are typically metal oxides, which are insoluble in nonaqueous electrolytes, resulting in accumulation …

Numerical Studies For Improving Fracture Toughness Resistance Curve Testing Using Single-Edge (Notched) Tension Specimens, Yifan Huang

Electronic Thesis and Dissertation Repository

The fracture toughness resistance curve, i.e. the J-integral resistance curve (J-R curve) or the crack tip opening displacement resistance (CTOD-R) curves, is widely used in the integrity assessment and strain-based design of energy pipelines with respect to planar defects (i.e. cracks). This thesis deals with issues related to the experimental determination of the J(CTOD)-R curves using the newly-developed single-edge (notched) tension (SE(T)) specimens. In the first study, the plastic geometry factor, i.e. the η_pl factor, used to evaluate J in a J-R curve test based on …

Ginseng Polysaccharides Nanoparticles - Synthesis, Characterization, And Biological Activity, Kazi Farida Akhter

Electronic Thesis and Dissertation Repository

North American (NA) ginseng is a widely used medicinal plant. Polysaccharides (PS), the major medicinal fractions derived from NA ginseng root, have been shown several biological activities including anti-carcinogenic, anti-aging, immunostimulatory and antioxidant activity. This work focused on nanoprocessing of ginseng PS for enhancing their immunostimulation. Herein, we have developed a novel microfluidic approach to synthesize ginseng PS nanoparticles (NPs) from NA ginseng root. The microfluidics was found to provide unimodal PS spheres down to 20 nm with very narrow particle size distributions. In addition, the immunostimulating effect was investigated on Murine macrophage cell lines, with the results revealing an …

Catalytic Conversion Of Fructose, Glucose And Industrial Grade Sugar Syrups To 5-Hydroxymethylfurfural, A Platform For Fuels And Chemicals, Sadra Souzanchi

Electronic Thesis and Dissertation Repository

5-hydroxymethylfurfural (HMF) as a versatile and polyfunctional compound derived from dehydration of biomass has attracted increasing attentions in research over the past decades. HMF is an important intermediate and platform chemical, which can be converted into different useful chemicals as well as the promising biofuels. It can be obtained from acid-catalyzed dehydration of different C₆-based carbohydrates such as glucose, fructose, sucrose and cellulose.

In this thesis, a cost-effective process for catalytic conversion of simple sugars (particularly glucose and fructose) and industrial grade sugar syrups to HMF was studied in a novel biphasic continuous-flow tubular reactor using inexpensive heterogeneous …

Studies On Nanocomposite Coating Produced By Laser-Assisted Process To Prevent Silicone Hydrogels From Bio-Fouling, Vishnuvardhana Wuppaladhodi

Electronic Thesis and Dissertation Repository

In this thesis, silver nanoparticles incorporated into polyvinylpyrrolidone (PVP) were deposited on silicone hydrogel to improve the hydrophilicity of the silicone hydrogel and prevent the growth of bacteria. Two different processes were employed to produce Ag nanoparticles: (1) Process-A is a photochemical reduction; (2) Process-B is laser ablation in liquid. Following that, MAPLE process was employed to deposit the Ag-PVP nanocomposites on the surface of silicone hydrogel. A solid-state pulsed laser (Nd:YAG) with a wavelength of 532 nm at a fluence of 50.4 mJ/cm² was used in the MAPLE system to deposit Ag-PVP nanocomposite coating. Our results indicate that …

Silicon Anode Materials For Next Generation Lithium-Ion Batteries, Qizheng Li

Electronic Thesis and Dissertation Repository

Lithium Ion Batteries (LIBs) are a promising green energy storage system with application toward portable electronic devices, electronic vehicles (EVs) and smart grid energy storage. High energy density is one of the most important advantages for LIB, however, improvements toward performance measures, such as energy density, power and rate capability, cycling life, safety and cost, need to meet the different requirements for various applications. It is well known that battery performance is highly dependent on the type of electrode material that is employed. Currently most LIBs are predominantly fabricated using graphite as an anode material. Therefore, finding a qualified candidate …

Application Of Molecular Layer Deposition For Graphite Anodes In Lithium-Ion Batteries And Porous Thin-Film Materials, Craig L. Langford

Electronic Thesis and Dissertation Repository

With climate change occurring because of greenhouse gas emissions, the demand for emission free transportation has led to the development of electric vehicles. Improving the batteries’ cycling stability, capacity and safety have been the leading challenges to compete with gasoline and diesel engines. With advances in thin-film deposition techniques via atomic and molecular layer deposition, ultrathin films can be deposited to control the surface chemistry of the battery’s active materials. This thesis aims to understand two main aspects of molecular layer deposition. First, how it can influence solid electrolyte interface formation on the graphite surface during cycling in a lithium-ion …

Production Of Bio-Based Phenol Formaldehyde Foams, Bing Li

Electronic Thesis and Dissertation Repository

Considering the declining non-renewable fossil resources, there is increasing interest in the development of more environmentally conscious, sustainable and cost-effective substitutes for chemical production. Lignin, a main component in lignocellulosic biomass, has been considered to be a potential substitute for petroleum-based phenol due to its phenolic structure.

This PhD dissertation aimed at producing bio-based phenol formaldehyde (BPF) foams using bio-phenols, including but not limited to, kraft lignin (KL), organosolv lignin (OL), hydrolysis lignin (HL), and bio-crude oil from white birth bark. The challenge of the existing process of producing BPF foams is that a low phenol substitution ratio, generally less …

Kinetics Of Length Scale Dependent Deformation Of Gold Microspheres And Micropillars, A Z M Ariful Islam

Electronic Thesis and Dissertation Repository

In this thesis length and time scale dependence of the operative plastic deformation mechanisms in Au is studied. Uniaxial compression tests were performed at various loading rates on FIB-milled Au micropillars and single-crystalline Au microspheres of diameter ranging from 0.8 to 6.0 µm to investigate the incipient and bulk plasticity events. Constant-load ambient-temperature creep tests were performed on the micropillars to study the time-dependent plasticity at very slow strain rates. Uniaxial compression tests were also performed on coated Au microspheres to study the effect of extrinsic constraint on the deformation mechanisms.

During uniaxial compression, both the Au micropillars and microspheres …

Doped Tio2 Nanowires For Applications In Dye Sensitized Solar Cells And Sacrifical Hydrogen Production, Qasem Alsharari

Electronic Thesis and Dissertation Repository

This thesis explores the synthesis of metal oxide 1-D nanowires using a sol-gel method in supercritical carbon dioxide (sc-CO₂), as an environmental friendly enabling solvent. Porous nanowires were synthesized and their performance was tested in dye sensitized solar cell and sacrifical hydrogen production. Titanium isopropoxide (TIP) was used as a precursor for titania synthesis while copper, bismuth and indium were examined as dopants, respectively. The sol-gel reactions were catalyzed by acetic acid in CO₂ at a temperature of 60 °C and pressure of 5000 psi. It was observed that acetic acid/monomer ratio > 4 produced nanowires while a …

Engineered Quantum Dots For Eva Nanocomposite Films And Tio2 Photocatalysts, Md Abdul Mumin

Electronic Thesis and Dissertation Repository

Light absorbing inorganic nanoparticles in transparent plastics such as poly(ethylene-co-vinyl acetate) (EVA) are of enormous interest in emerging solar materials, including photovoltaic (PV) modules and commercial greenhouse films. Quantum dots (QDs) have the potential to absorb UV light and selectively emit visible light. However, how to stabilize the QDs for long product life spans without "blinking" while enabling their easy integration into polymer systems is lacking. This work examines different approaches for loading mesoporous silica encapsulated QDs into EVA polymer films which can control plant growth in greenhouses or enhance PV panel efficiencies.

Highly luminescent CdS and CdS-ZnS core-shell QDs …

Surface Modification Of Electrode Materials For Lithium-Ion Batteries, Biwei Xiao

Electronic Thesis and Dissertation Repository

The development of lithium-ion batteries (LIBs) has been hampered by the intrinsic limitations of the electrode materials. High-performance LIBs demand electrode materials with fast lithium/electron diffusion rate, stable surface chemistry and high specific capacity. Surface modification by atomic layer deposition (ALD) is an essential method to optimize the performance of the electrode materials. The research in this thesis aims at achieving high-performance LIBs via surface modification and understanding the mechanisms via synchrotron radiation.

Firstly, by applying ALD FePO₄ on LiNi_0.5Mn_1.5O₄ (LNMO), we successfully alleviated the electrolyte decomposition under high voltage by using the electrochemically …

Application Of Treated Oil Sands Drill Cuttings Waste In Micropiles Construction, Moustafa Ahmed Raafat Mohamed Aboutabikh

Electronic Thesis and Dissertation Repository

A micropile is constructed by drilling a hole, placing a steel reinforcing element, grouting it using neat cement. However, cement production consumes energy and generates carbon dioxide. Implementing waste materials in construction applications represents a sustainable solution for many waste management problems. On the other hand, oil sands drill cuttings waste represents one of the most difficult challenges for the oil sands mining sector. Reducing the amount oil sands drill cutting waste sent to landfill offers one of the best solutions for waste management. This thesis presents an innovative solution for application of treated oil sands waste (TOSW) in grout …