Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 18 of 18
Full-Text Articles in Engineering
The Monopole Antenna With A Small Number Of Radials, S. H. Durrani
The Monopole Antenna With A Small Number Of Radials, S. H. Durrani
Electrical and Computer Engineering ETDs
This paper reports a study of an antenna system consisting of a vertical monopole and a small number of insulated horizontal radials lying lightly on the ground.
The monopole antenna has long been popular for medium frequency broadcasting because of its inherent simplicity and economy. Although quarter-wavelength resonant structures were used in the early days, it was shown by Ballantine (1924) that for a given power, the strongest field strength at the radio horizon was produced by an antenna about 0.6 wavelength long. This ignored the sky wave and was based on the assumption of a perfectly conducting (and reflecting) …
Hypersonic Plasma Thermionic Generator, Andre R. Leblanc
Hypersonic Plasma Thermionic Generator, Andre R. Leblanc
Electrical and Computer Engineering ETDs
The Langmuir two-probe system is extended to cover the case of electron emission from one of the probes. The contact potential difference between the two probes is also included as part of the equations. One of the probes, known as the emitter, operates at sufficiently high temperatures such that electron emission occurs, while the other probe, known as the collector, operates at low enough temperatures such that its electron emission can be neglected.
Linear Side-Loaded Transmission-Line Antennas, Robert W. Kulterman
Linear Side-Loaded Transmission-Line Antennas, Robert W. Kulterman
Electrical and Computer Engineering ETDs
A need has arisen in recent years for a mobile transmitting antenna capable of radiating large amounts of power as efficiently as possible in the frequency range from 10 to 40 kc. Several mechanical and electrical problems are encountered in building and operating such an antenna.
Unm Snail Programming Manual, Paul Edward Presson
Unm Snail Programming Manual, Paul Edward Presson
Electrical and Computer Engineering ETDs
The purpose of this thesis is to provide an introduction at the high school level to the principles of programming digital computers and to serve as a programming manual for the UNM SNAIL. The thesis is self-contained; that is, it may be read without reference material to provide a general background knowledge of computer programming.
Electromagnetic Radiation In Magneto-Ionic Media For Vlf And Vhf Spectra, Kenneth R. Cook
Electromagnetic Radiation In Magneto-Ionic Media For Vlf And Vhf Spectra, Kenneth R. Cook
Electrical and Computer Engineering ETDs
The interaction of electromagnetic fields and magneto-ionic media has received considerable attention in the last few years. In rather general terms, the investigation of these phenomena can be categorized into two basic classes. In one class of investigation the primary interest is the dynamic nature of the plasma when subjected to specialized forms of electromagnetic fields. This branch of science has various nomenclatures such as hydromagnetics, magnetohydrodynamics, plasma physics and numerous others implying the use of high density ionized gases interacting with electromagnetic fields. Controlled fusion processes for transforming energy states is an example of this branch of electromagnetics and …
Some Design Criteria For Open-Ended Microwave Cavities, Richard O. Gilmer
Some Design Criteria For Open-Ended Microwave Cavities, Richard O. Gilmer
Electrical and Computer Engineering ETDs
Primarily this paper describes the electromagnetic problems involved in determining a proper waveguide size for the TE11N cavity and its terminations. Also, one chapter is devoted to construction techniques used in the construction of open-ended sampling cavities. The approach one may use for aerodynamic improvements of the cavities is discussed, but no conclusions can be drawn about the design's validity since no experimental tests were taken.
This paper will describe the design, construction, and testing of a microwave cavity, the end plates which are replaced by terminations which allow up to 93% of the cross-sectional area of the terminations …
An Automatic Standard Cell Comparator, D. W. Braudaway
An Automatic Standard Cell Comparator, D. W. Braudaway
Electrical and Computer Engineering ETDs
No abstract provided.
Conduction Phenomena Of Reduced Titanium Dioxide With An Oxide Surface Layer, Richard Bechtel
Conduction Phenomena Of Reduced Titanium Dioxide With An Oxide Surface Layer, Richard Bechtel
Electrical and Computer Engineering ETDs
No abstract provided.
Counter Circuits Using Gaseous Discharge Tubes And Rectifiers, Robert Creveling
Counter Circuits Using Gaseous Discharge Tubes And Rectifiers, Robert Creveling
Electrical and Computer Engineering ETDs
This thesis pertains to an electric circuit consisting of gaseous discharge tubes and rectifiers arranged to comprise a counting or integrating device for electric impulses impressed on the system. The ideas presented herewith are wholly those of the author and were submitted in the form of a patent application via the New Mexico School of Mines in June 1950. The basic idea for such a circuit was conceived on November 14, 1949.
Linear Time Base Precision And The Compound Sweep Concept, William W. Steger
Linear Time Base Precision And The Compound Sweep Concept, William W. Steger
Electrical and Computer Engineering ETDs
This paper is a monograph on general precision criteria for feedback linear time base circuits. The linearity and stability performance of these devices is evaluated in terms of deviation from an ideal ramp function.
In its entirety, the paper attempts to provide a complete reference for the most commonly encountered aspects of time base precision. Attention is centered on what could be called the "low frequency" case, which most often is valid in applications requiring a high precision time base.
The subject is developed in a number of progressive, cumulative stages. The end products at each stage of the analysis …
A Prototype Transmitter For A Microwave Refractometer, John C. Jordan
A Prototype Transmitter For A Microwave Refractometer, John C. Jordan
Electrical and Computer Engineering ETDs
A study of the design, development and fabrication details of a transmitter for a microwave refractometer is presented. Atmospheric, radio frequency, refractive index is to be measured rapidly and directly up to altitudes of the order of 200,000 feet. Requirements for the transmitter with regard to its weight, volume and environment are indeed stringent since it is proposed to package the transmitter in a ogive configuration and elevate it to these altitudes utilizing a rocket propulsion system.
Complementary Transistor Memory Circuit And Logic Applications, Lee M. Bossart
Complementary Transistor Memory Circuit And Logic Applications, Lee M. Bossart
Electrical and Computer Engineering ETDs
No abstract provided.
An Approach To Azimuth Angle Refraction Corrections, Wallis R. Cramond
An Approach To Azimuth Angle Refraction Corrections, Wallis R. Cramond
Electrical and Computer Engineering ETDs
In the past, analyses of tropospheric reactions of electromagnetic waves propagating in the atmosphere have been based on spherically symmetric medium. However, this applies only to ray bending in a vertical plane (elevation angles). Numerous methods have been developed to correct for elevation angle errors. In 1961, the presentation of a new method for use in a nonsymmetric atmosphere revived interest in horizontal (azimuth angle) bending. In order to use this method to test significance of azimuth angle errors, the spacial distribution of index of refraction must be known.
The primary objective of this paper is to propose a model …
A Theory Of Self-Evaluating Discrete Communication Systems, Samuel D. Sterns
A Theory Of Self-Evaluating Discrete Communication Systems, Samuel D. Sterns
Electrical and Computer Engineering ETDs
No abstract provided.
Radar Back-Scatter Theories For Near-Vertical Incidence And Their Application To An Estimate Of The Lunar Surface Roughness, Harbhajan S. Hayre
Radar Back-Scatter Theories For Near-Vertical Incidence And Their Application To An Estimate Of The Lunar Surface Roughness, Harbhajan S. Hayre
Electrical and Computer Engineering ETDs
This work, after the critical examination of the theoretical background on back-scattering from rough surfaces, offers a new approach to its theory. Various back-scatter theories, as well as the statistical models of terrain and moon assumed therein, are critically reviewed and correlated. A new approach which uses a simple statistical model is then presented for the description of scattering of electromagnetic waves from a rough surface. The statistics of a rough surface are discussed in terms of certain parameters which can be easily associated the surface features, and a new expression for the back-scattering radar cross section per unit area …
A System For Recording Electromagnetic Atmospheric Noise In 30-50 Cps Region, James F. White
A System For Recording Electromagnetic Atmospheric Noise In 30-50 Cps Region, James F. White
Electrical and Computer Engineering ETDs
The electromagnetic noise spectrum extends from below 1 cps to above 3,000 mcs. Within this spectrum many phenomena of atmospheric noise have been observed. Those atmospherics which occur in the audio frequency region of the spectrum have been given not only descriptive but also subjective names by many different investigators. As a result, it is often difficult to determine from the literature what aspect of the noise phenomenon is being considered. In addition, references to low frequencies involved in certain experiments are vague. A brief history of atmospherics research is presented here in order to explain the terminology, to show …
A Study Of Gamma-Ray Photoconductivity In Organic Dielectric Materials, Stanley E. Harrison
A Study Of Gamma-Ray Photoconductivity In Organic Dielectric Materials, Stanley E. Harrison
Electrical and Computer Engineering ETDs
The gamma-ray photoconductivities of polyethylene, polystyrene, polyvinylchloride, polypropylene, Teflon, Nylon, Kel-F, and three thermosetting resins denoted as Epoxy 1478-1, 1478-3, and 1478-22 have been measured. The measurements were made at steady-state gamma-ray intensities ranging from 1.0rad(H2O)/min to 3.0 x 105 rads(H2o)/min and at controlled temperatures ranging from 90 degrees Fahrenheit to 140 degrees Fahrenheit. Conductivity changes resulting from the steady-state gamma-ray exposures were measured continuously throughout the exposure and after the exposure. The exposure period was of sufficient duration to allow all samples to achieve an equilibrium conductivity value.
A Qualitative Study On An Exploding Wire Fuse, W.D. Lacoss
A Qualitative Study On An Exploding Wire Fuse, W.D. Lacoss
Electrical and Computer Engineering ETDs
This study was undertaken in an effort to develop basic concepts of normal operating fuse criteria that will apply to capacitor energy storage systems. To develop ideas germane to normal fuse operating limits, it was necessary to consider certain principles that preceded this development: (1) A review had to be made of some of the experimental work on the exploding wire phenomenon to indicate a possible application as a fuse; (2) A typical circuit requiring such a fuse had to be described schematically and analyzed to show the dependency between the circuit parameters and the necessary conditions for obtaining fusing …