Engineering Commons^™

Rapid Composter, Shannon Shinozaki, Avin Atencio, Jonathan Fraser, Lukas Kolbl, Russell Occhipinti

Mechanical Engineering

This project was created with the intent of automatically composting equine bio waste to be reused as plant fertilizer. The system consists of four subsystems: power generation and storage, automatic controls, aeration, and structure. Each subsystem may be manufactured independently, then put together. This system will not have access to power outlets, so it was designed to be solar-powered.

Skip The Grid: Restoring Light To The Navajo Nation, Diego Isaias Gonzalez

Construction Management

Skip the Grid is an interdisciplinary service project through California Polytechnic State University, San Luis Obispo (Cal Poly) where students and faculty partnered with sponsors including SOLV Energy and Goal Zero, and facilitation by Heart of America, an educational equity non-profit, to bring solar power to 27 families of school aged children in the Navajo Nation. The Navajo Nation is a historically disadvantaged community which lacks the infrastructure and financial capacity to provide electrical service to about a third of the families living on the reservation. Families in the Red Mesa and Chinle School Districts were the focus for this …

Locking Solar Tracking Bushing, Benjamin James Reed, Andrew Donald Maas, Angel Navarro-Iniguez, John Vincent Bruner

Mechanical Engineering

The contents of this final design review (FDR) outline the progress made by a team of four mechanical engineering students at California Polytechnic State University, San Luis Obispo to solve the problem of torsional galloping in solar tracker panels since the preliminary design review. The project proposed by the sponsor, Christian Friedrich, on behalf of ARaymond is a design for a friction based braking system integrated into a redesigned bushing.

The CDR contains details about the system design, the design justification, the manufacturing plan, and design verification plan. In the system design section, the four manufacturing subsystems (bushing mount, actuation, …

Solar Powered Electric Bicycle, Joseph Kent Debruynkops

Liberal Arts and Engineering Studies

A solar-powered electric bike that is useful for college students.

Solar Solution For Mini-Rover, Michaella Ochotorena, Derick Louie, Jonathan Cederquist, Collin Petersen, Cole Korchek

Mechanical Engineering

This project focuses on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Baker/Koob Final Report: Solar Solution For Mini Mars Rover, Jonathan Cederquist, Cole Korchek, Derick Louie, Michaella Ochotorena, Collin Petersen

Mechanical Engineering

This project focused on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Solid Thermal Storage As An Energy Storage Device In Insulated Solar Electric Cookers: Thermal Modeling And Experiment, Michael Antonio Fernandez

Physics

The use of solid thermal storage (STS) as an energy storage device in insulated solar electric cookers (ISEC) was explored using a thermal simulation before retrofitting an existing cooker without energy storage and testing it under several conditions. STS sizing, material selection, and geometry were examined from both theoretical and practical perspectives and re-examined following experimental results. Characterization of the system’s thermal interfaces and methods to improve their thermal conductivities were investigated resulting in several performance enhancements to the system.

Skip The Grid: Installation Of Solar Powered Refrigeration In The Navajo Nation, Connor T. Avrit

Construction Management

The Skip the Grid project was a project completed with the joint efforts of California Polytechnic State University, San Luis Obispo (Cal Poly) and many other company sponsors including Solv Energy, Dometic, Goal Zero and Heart of America a nonprofit. Skip the Grid’s project goal and outcomes was to improve the quality of life and provide clean sustainable off grid energy to families within the Navajo Nation. The Navajo Nation is located in the Four Corners region of the United States with approximately a third of its residents without the means or circumstances to be tied into grid level power. …

Can The In-House Installation Of Solar Panels Increase Residential Builder’S Profits?, Garrison M. O'Marr

Construction Management

The purpose of this paper is to analyze and determine if the In-house installation of solar panels by Residential Builders will lead to increased profits. Specifically, this pertains to Large Residential Developers that are focused on building single-family home developments with greater than 25 homes. With the demand for solar power in new homes continuously rising year after year, it is smart to find more profitable ways to install these systems, one of which is self-installation performed by the General Contractor. The Methodology of research I used is a combination of primary and secondary research, as well as interviews with …

Skip The Grid: Giving Power To Navajo Nation, Ryan J. Schacherbauer

Construction Management

Skip the Grid is a project organized by Heart of America, a nonprofit, looking to improve the education and overall wellbeing of children and their families. Many residents within Navajo Nation do not have access to continuous power and rely on temporary generators or car battery to obtain any kind of electricity. Heart of America partnered with the Red Mesa School District to identify families that did not have power, which was impacting the children’s ability to complete their online schoolwork. This senior project was comprised of an interdisciplinary team responsible for installing a working solar system on twelve homes …

Living Off The Grid With Renewable Energy: A Case Study, Jake Reid O'Balle

Construction Management

The trend towards green, sustainable living is on the rise and the benefits are continuing to make noise in the world of homeowners. In this project, the benefits of renewable energy and consumer preferences were analyzed and applied to off-grid living in the form of a case study. It was found that the majority of homebuyers are concerned about the environment and wanted an environmentally friendly home but are not willing to pay more in order to achieve these desires. This information spurred the need for a detailed assessment of the feasibility of sustainable off-grid living. After conducting extensive research, …

Performance Loss Rate And Temperature Modeling In Predictive Energy Yield Programs For Utility-Scale Solar Power Plants, Katelynn M. Dinius

Master's Theses

The Gold Tree Solar Farm, designed by REC Solar, has a rated output power of 4.5 MW and began operation in 2018 to provide electricity to Cal Poly’s campus. Gold Tree Solar Farm site terrain consists of rolling hills and uneven slopes. The uneven typography results in interrow shading, requiring a modified tracking control algorithm to maximize power production. Predicting a utility solar field’s lifetime energy yield is a critical step in assessing project feasibility and calculating project revenue. The MATLAB-based predictive power model developed for this field overpredicted power in the middle of the day. The purpose of this …

Solar Decathlon Competition 2021, Khanh My Fleshman, Ashley H. Kim, Ian Grant Maclean, Erich Peter Fenczik Warnock, Carina Michaela Nani Monaco

Mechanical Engineering

This report is intended to outline all relevant background information, decisions, and design direction for our senior project at California Polytechnic State University, San Luis Obispo. We will be designing net-zero, affordable housing to compete in the attached housing division of the 2021 Department of Energy Solar Decathlon. With the increased urgency of climate change and focus on sustainability in construction, the importance of designing a net-zero structure is very apparent. Because there is a great need for affordable and sustainable housing in Watts, CA, we will be tailoring our design to meet this community’s needs. Details of the Solar …

Solar Photovoltaic Iv Curve Tracer, Jonathan W. Skelly

Electrical Engineering

The Solar Photovoltaic Current-Voltage (IV) Curve Tracer, sponsored by Cal Poly Professor Dale Dolan, characterizes solar array current vs. voltage curves for any given temperature and irradiance. The curve tracer is battery powered, and functions autonomously across loading conditions from short circuit to open load on any sub-450-watt solar array. The curve tracer supports separate data logging modes for both single cells and single modules to maximize data accuracy for each. For testing full strings of solar panels, up to 10 IV curves may be stored in persistent EEPROM memory. Stored data may be recalled later for output to a …

Hybrid Ac/Dc House, Vinh Q. Tran, Casey Winans, Erin O'Rourke

Electrical Engineering

The Hybrid AC/DC house is a proof of concept implementing a DC bus in residential power systems. The implementation of the DC bus is motivated by efficiency through a direct path for DC sources and loads. The avoidance of DC-to-AC and AC-to-DC conversions used in typical residential systems especially those with DC sources such as solar panels could experience higher efficiencies through only DC-to-DC conversions between the sources and the loads.

Smud Solar Regatta, Logan Garby, Nam Le, Jacob Singer, Alejandro Carrera, Laura Casas

Mechanical Engineering

The Sacramento Municipal Utility District (SMUD) hosts the Solar Regatta every year in Rancho Seco, CA, a competition which consists of teams building a solar powered boat to compete in three races: the sprint race, endurance race, and slalom race. The Cal Poly Solar Regatta team was informed mid-project by SMUD that the competition has been canceled once again for spring 2021, but the team decided to move forward with the construction of the boat. The previous Cal Poly team from 2019/2020 designed the hull and propulsion system of the boat. The 2020/2021 team worked with the previous team in …

Solar Soiling Mitigation, Claire Desmith

Electrical Engineering

This senior project aims to mitigate performance losses that occur in Photovoltaic (PV) systems due to soiling of the panels. Soiling is the natural occurrence of debris accumulation on panels, depending on local climate conditions. Soiling loss refers to efficiency lost due to dirt and dust accumulation on the panels. The debris reduces system output by shading on a smaller scale. In addition to uniform soiling, corner soiling is observed in framed modules as debris collects in the corners of the modules. While solutions currently exist to clean modules to mitigate soiling losses, these solutions are often expensive and time …

Net-Zero Homes, The Homes Of The Future, Primo Guseppi Facchini

Construction Management

Net-Zero homes are the homes of the future (Holmes, 2018). What makes Net-zero homes unique is they rely on solar power, opposed to all standard housing that relies on the power grid. These homes use solar instead of other forms of energy generating technology because it is more affordable and better for the environment. California has blazed the trail for the rest of the United States and the world to follow with their Net-Zero housing proposition. Starting January 2020 California will require all residential buildings to be net-zero homes. Net-Zero homes are important because it is no secret that our …

Cal Poly Microgrid Fixed Pv Array, Christopher L. Ewert, Justin R. Syracuse, Donald A. Syracuse, Jason M. Kehl

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University of San Luis Obispo would like an adjustable, fixed angle solar panel mount to help educate students on basic solar energy principles. Our team has developed a unique sawhorse design utilizing ideation techniques and design selection tools. The selected design allows for multiple panel adjustability and control of both azimuth and tilt angle. Safety concerns are addressed with action plans to mitigate risk. Concept prototypes to justify gearbox functionality and subsystem cohesion was utilized to reduce manufacturing issues. Manufacturing began in March 2020 and proceed through until the end of the …

Single Axis Solar Panel Tracking Mount Using Stepper Motor And Accelerometer Positional Control, Ezra Pramono

Electrical Engineering

Optimal solar panel systems rotate to track the sun, as solar panels operate at their maximum potential when the panel plane is completely normal to the sun’s rays. These tracking systems often using two axes of movement. This project is to design a system that will allow a solar panel to track the sun using only one rotational axis, which saves energy and uses fewer parts. The system tracks the entire range of the sun's motion and has positional feedback to allow control of the solar panel's angle. The position of the tracking system is controllable via an external computer. …

Design And Development Of Laboratory Single-Axis Pv Module Tracker, Helen A. Rice, Delaney Berger, Avishek Maitra

Electrical Engineering

Solar energy is an integral part of the renewable energy industry. Advanced solar farms actively track solar movement and update solar panel angles to maximize the system’s output power. Cal Poly boasts its own Solar Farm that features a single-axis tracking system. Single-axis tracking aims to get panels as close to perpendicular as possible given the panel arrangements and given the time of year. Single-axis tracking is a more robust measurement and tracking option. Single-axis tracking systems usually only have East-West panel arc movement, following the sun’s rotation. Dual-axis trackers have both East-West and North-South panel arc movements. Dual-axis systems …

Case Study: Google’S Unique Canopy Styled Construction, Ray A. Cuevas

Construction Management

In today’s rapidly changing world, builders are pushing to implement more sustainable practices and incorporate innovative techniques to integrate green practices into their structures. One of the latest examples of this push towards sustainability is seen in Google’s new headquarters, Charleston East located in Mountain View, California. Combining their widely known mission to provide a positive work environment for their employees with their passion to be more environmentally friendly, Google has set out to create a Living Building with LEED Platinum certification. In order to accomplish this Google has collaborated with Bjarke Ingels Group, Heatherwick Studio, and Hathaway Dinwiddie. The …

Proposal For A New Construction Management Emerging Trends Elective Course: Principles Of Solar Construction, Nicholas J. Gairaud

Construction Management

California Polytechnic State University (Cal Poly) prides itself on its learn by doing motto which encourages students to participate in hands-on projects and choose elective courses about topics they are interested in. This project is an outline for an Emerging Trends elective course that aims to fill the gap between what students learn in school and what they see in the field. Over the past decade, the use of on-site solar energy generated has skyrocketed in the commercial and residential sectors. The purpose of this course is to inform students about solar requirements and to lay the groundwork for students …

An Investigation Of Diode Failure, Nicholas James Adams

Physics

Solar electricity can be used to cheaply cook food and charge electronic devices. We investigate the viability of using diodes as heating elements for insulated solar electric cooking (ISEC). In addition, information on designing and constructing ISEC compatible phone chargers and rechargeable LED lighting systems is included.

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

Pv Mppt Water Pump Controller, Jacob R. Lamkin

Electrical Engineering

The intention of this project is to create a low cost way to extract the maximum useful power from a PV module to power a water pump. This approach will yield maximum financial and technical accessibility for end users. The project was successful in powering a water pump from a PV module as desired, and the microcontroller driven control circuitry was capable of finding and maintaining operation at the maximum power point of the PV module. Due to the low performance of the buck converter used in this project, this approach was not as efficient as desired and would require …

Modeling And Testing Powerplant Subsystems Of A Solar Uas, Luke J. Bughman

Master's Theses

In order to accurately conduct the preliminary and detailed design of solar powered Unmanned Aerial Systems (UAS), it is necessary to have a thorough understanding of the systems involved. In particular, it is desirable to have mathematical models and analysis tools describing the energy income and expenditure of the vehicle. Solar energy income models may include available solar irradiance, photovoltaic array power output, and maximum power point tracker efficiency. Energy expenditure models include battery charging and discharging characteristics, propulsion system efficiency, and aerodynamic efficiency. In this thesis, a series of mathematical models were developed that characterize the performance of these …

Solar Shingle Experience: Evaluating Their Value In Today's Market, Kevin R. Church

Construction Management

Solar technology has been on the rise in popularity in recent years and we are starting to see more of it across the US. As the technology and capabilities of photovoltaic (PV) cells advance, there has been an increase in the number of different product designs that incorporate PV cells. Building integrated Photovoltaic (BIPV) products have been some of the most popular introduced to the market. In the last five years, one of these BIPV products, a solar system integrated into the roofing shingles of residential homes has been sensationalized and, according to a California solar installer, that has encouraged …

Viability Of Solar Power On Jobsites, Braden J. Levalley

Construction Management

The use of solar energy has slowly been on the rise over the past few decades, the full potential of solar energy has not been realized in the realm of construction. Solar power in construction has been slow to catch on, as many of the upfront costs associated with solar power has created a feeling that investing in such systems will ultimately not be worth the investment. This paper attempts to address the issues of upfront costs, the willingness for contractors to invest in renewable energy both now and in the future, and will also identify possible uses for solar …

Logistics Of Construction In Agbokpa, Ghana, Fletcher David Podosek

Construction Management

In August of 2019, three Cal Poly CM students will travel to the remote fishing village of Agbokpa in Ghana. Our project is to install a water filtration system that will create potable water for the villagers that currently have to walk miles to obtain clean water. We will be laying nearly 1000 ft of pipe, installing a solar powered pump, and building a water filtration system hours away from any electricity. A project of this type requires a great deal of logistical planning in order to ensure that all aspects of the project is thought of and planned for. …