Engineering Commons^™

Efficiency Study Of A Hybrid Ac/Dc House, Eunice Dominique Solomon Santiago

Master's Theses

With the proliferation of residential-scale renewable energy sources and DC loads, it has become attractive to use residential DC electrical system that could offer benefits over the legacy residential AC electrical system. The Hybrid AC/DC house provides a sustainable alternative to preexisting residential electrical system by having both AC and DC buses. The DC bus facilitates the connection from DC sources to DC loads, whereas the AC bus interfaces AC sources to AC loads. The study develops the equations to calculate losses based on a model consisting of four main components: Multiple-Input Single-Output (MISO) converter, AC-DC converter, inverter, and DC-DC …

Bi-Directional Dc-Dc Converter, John W. Hamlin, Oscar Ambriz, Luis Onofre

Electrical Engineering

This project was developed with the purpose of creating an efficient energy management system for the DC House project, with a centralized 12V battery system fed by a 48V Multiple Input Single Output Source (MISO). The energy management system will consist of a bidirectional DC-DC converter. During the day when the renewable sources produce enough energy to fulfill the load’s energy demand, the converter will make use of the excess energy by taking a 48V DC input and stepping it down to a 12V DC output in order to charge a 12V 100 Ah battery. When renewable sources can no …

Cascaded Linear Regulator With Positive Voltage Tracking Switching Regulator, Brandon K. Nghe

Master's Theses

This thesis presents the design, simulation, and hardware implementation of a proposed method for improving efficiency of voltage regulator. Typically, voltage regulator used for noise-sensitive and low-power applications involves the use of a linear regulator due to its high power-supply rejection ratio properties. However, the efficiency of a linear regulator depends heavily on the difference between its input voltage and output voltage. A larger voltage difference across the linear regulator results in higher losses. Therefore, reducing the voltage difference is the key in increasing regulator’s efficiency. In this thesis, a pre switching regulator stage with positive voltage tracking cascaded to …

Optical And Electrical Analysis Of Zno/Znte Micropillar Solar Cells, Sadia Binte Sohid

Master’s Theses

The prime focus of the energy-research community in recent times has been replacing fossil fuels with renewable energy. Therefore, photovoltaic research areas are rapidly expanding in this era. The purpose of this work is to compare three different structural ZnO/ZnTe solar cell types (planar, axial micropillar and radial micropillar). The best optical and electrical performance has been obtained by the radial junction (core-shell) ZnO/ZnTe micropillar solar cell due to its pillar structure and radial junction. The unique advantage of the radial junction micropillar is that the angle of the incident light and the carrier collection is orthogonal. Therefore, the pillar …

Comparative Study Of Power Semiconductor Devices In A Multilevel Cascaded H-Bridge Inverter, Kenneth Mordi

Graduate Theses and Dissertations

This thesis compares the performance of a nine-level transformerless cascaded H-bridge (CHB) inverter with integrated battery energy storage system (BESS) using SiC power MOSFETs and Si IGBTs. Two crucial performance drivers for inverter applications are power loss and efficiency. Both of these are investigated in this thesis. Power devices with similar voltage and current ratings are used in the same inverter topology, and the performance of each device is analyzed with respect to switching frequency and operating temperature. The loss measurements and characteristics within the inverter are discussed. The Saber® simulation software was used for the comparisons. The power MOSFET …

Analysis Of Improved Multiphase Buck Converter, Usamah Riaz Ahmad, Scott Wu

Electrical Engineering

While the number of transistors per microprocessor is rapidly increasing, the power requirements of converters are getting more and more important. The amount of current is increasing, while at the same time the output voltage is steadily decreasing. Today’s boards are exceeding 100A, while the buck converters have their output voltage below 1 V. Due to these new power requirements, multiphase buck converters are becoming more popular. In addition, this topology is usually used with voltage regulator modules (VRM).

The TPS40090EVM-002 board was used as the original multiphase buck with an input voltage of 12 V and output voltage of …

A Study Of The Sensitivity Of Energy Conversion Efficiency To Load Variation In Class-E Resonant Power Inverter, Richard Samuel Jennings

Electrical & Computer Engineering Theses & Dissertations

In this thesis the sensitivity of energy conversion efficiency (ECE) and output power of a class-E resonant inverter under variable resistive and inductive load assignments is examined for wireless power transfer (WPT) applications. By performing simulation and mathematical analysis, it was found that the on-resistance of the switching device has minor effect on the design’s efficiency. Additional comparisons between the simulation and mathematical analysis show reasonable output power and ECE load variation performance for the design, but with unique load impedances where zero voltage switching (ZVS) and zero derivative switching (ZDS) are achieved. These comparisons also expose inaccurate mathematical assumptions. …

Modeling And Test Of The Efficiency Of Electronic Speed Controllers For Brushless Dc Motors, Clayton R. Green

Master's Theses

Small electric uninhabited aerial vehicles (UAV) represent a rapidly expanding market requiring optimization in both efficiency and weight; efficiency is critical during cruise or loiter where the vehicle operates at part power for up to 99% of the mission time. Of the four components (battery, motor, propeller, and electronic speed controller (ESC)) of the electric propulsion system used in small UAVs, the ESC has no accepted performance model and almost no published performance data. To collect performance data, instrumentation was developed to measure electrical power in and out of the ESC using the two wattmeter method and current sense resistors; …

Design And Evaluation Of An L-Band Current-Mode Class-D Power Amplifier Integrated Circuit, Michael J. Shusta

Masters Theses

Power amplifiers (PAs) convert energy from DC to high frequencies in all radio and microwave transmitter systems be they wireless base stations, handsets, radars, heaters, and so on. PAs are the dominant consumers of energy in these systems and, therefore, the dominant sources of system cost and inefficiency. Research has focused on efficient solid-state PA circuit topologies and their optimization since the 1960s. The 2000s saw the current-mode class-D (CMCD) topology, potentially suitable for today's wireless communications systems, show promise in the UHF frequency band. This thesis describes the design and testing of a high-efficiency CMCD amplifier with an integrated …

Design And Fabrication Of An Eddy Current Brake Dynamometer For Efficiency Determination Of Electric Wheelchair Motors, Wesley Brin

Browse all Theses and Dissertations

Electric wheelchairs have a considerable impact on improving the quality of life for the millions of disabled persons around the world. These modern pieces of technology offer freedom and mobility for disabled persons to interact with the world outside of their homes. The goal of this project is to assist in advancements of conventional electric wheelchairs. This includes replacing the heavy, bulky, and inefficient lead acid batteries and worm gear drive systems with lithium-ion batteries and wheel hub motors in order to decrease weight and size, and increase efficiency. This master thesis research is focused on designing, fabricating, and testing …

Parametric Study Of Efficiency Measures For Home Energy Conservation In Las Vegas, Nevada, Todd M. France

UNLV Theses, Dissertations, Professional Papers, and Capstones

Pulte Homes, a production home builder and community developer partnering with the U.S. Department of Energy's Building America program, has collaborated with the Center for Energy Research at the University of Nevada, Las Vegas and NV Energy, the local electric utility, on an energy conservation project in the Las Vegas Valley.

This study entails four model homes at a new development in the Summerlin community of Las Vegas, Nevada, named Villa Trieste. The home models, ranging in floor plan area from 1,487 to 1,777 square feet, have been constructed under the Environments for Living program and are LEED (Leadership in …