Engineering Commons^™

Brunet: Disruption-Tolerant Tcp And Decentralized Wi-Fi For Small Systems Of Vehicles, Nicholas Brunet

Master's Theses

Reliable wireless communication is essential for small systems of vehicles. However, for small-scale robotics projects where communication is not the primary goal, programmers frequently choose to use TCP with Wi-Fi because of their familiarity with the sockets API and the widespread availability of Wi-Fi hardware. However, neither of these technologies are suitable in their default configurations for highly mobile vehicles that experience frequent, extended disruptions. BRUNET (BRUNET Really Useful NETwork) provides a two-tier software solution that enhances the communication capabilities for Linux-based systems. An ad-hoc Wi-Fi network permits decentralized peer-to-peer and multi-hop connectivity without the need for dedicated network infrastructure. …

Autonomous Shipwreck Detection & Mapping, William Ard

LSU Master's Theses

This thesis presents the development and testing of Bruce, a low-cost hybrid Remote Operated Vehicle (ROV) / Autonomous Underwater Vehicle (AUV) system for the optical survey of marine archaeological sites, as well as a novel sonar image augmentation strategy for semantic segmentation of shipwrecks. This approach takes side-scan sonar and bathymetry data collected using an EdgeTech 2205 AUV sensor integrated with an Harris Iver3, and generates augmented image data to be used for the semantic segmentation of shipwrecks. It is shown that, due to the feature enhancement capabilities of the proposed shipwreck detection strategy, correctly identified areas have a 15% …

Underwater Robot Path Planning In An Intermittent Communication System, Hunter Gallant

Dartmouth College Master’s Theses

Sunflower, a novel cross-medium localization system between an aerial drone and an underwater robot, has not yet been implemented in a multi-robot exploration system. This project’s aim was to simulate various configurations of multi-robot systems, and to create an algorithm, called AdjustPath, to improve exploration and avoid inter- robot collisions. With three, five, seven, and ten simulated underwater robots, there was significant improvement when the AdjustPath algorithm was used. Knowing this, future hardware using the Sunflower system could use this proposed algorithm to increase efficiency and avoid more collisions.

Implementation Of Static Rfid Landmarks In Slam For Planogram Compliance, Brennan L. Drake

Honors College Theses

Autonomous robotic systems are becoming increasingly prevalent in everyday life and exhibit robust solutions in a wide range of applications. They face many obstacles with the foremost of which being SLAM, or Simultaneous Localization and Mapping, that encompasses both creation of the map of an unknown environment and localization of the robot in said environment. In this experiment, researchers propose the use of RFID tags in a semi-dynamic commercial environment to provide concrete landmarks for localization and mapping in pursuit of increased locational certainty. With this obtained, the ultimate goal of the research is to construct a robotics platform for …

Parallel Real Time Rrt*: An Rrt* Based Path Planning Process, David Yackzan

Theses and Dissertations--Mechanical Engineering

This thesis presents a new parallelized real-time path planning process. This process is an extension of the Real-Time Rapidly Exploring Random Trees* (RT-RRT*) algorithm developed by Naderi et al in 2015 [1]. The RT-RRT* algorithm was demonstrated on a simulated two-dimensional dynamic environment while finding paths to a varying target state. We demonstrate that the original algorithm is incapable of running at a sufficient rate for control of a 7-degree-of-freedom (7-DoF) robotic arm while maintaining a path planning tree in 7 dimensions. This limitation is due to the complexity of maintaining a tree in a high-dimensional space and the network …

Neuromorphic Computing Applications In Robotics, Noah Zins

Dissertations, Master's Theses and Master's Reports

Deep learning achieves remarkable success through training using massively labeled datasets. However, the high demands on the datasets impede the feasibility of deep learning in edge computing scenarios and suffer from the data scarcity issue. Rather than relying on labeled data, animals learn by interacting with their surroundings and memorizing the relationships between events and objects. This learning paradigm is referred to as associative learning. The successful implementation of associative learning imitates self-learning schemes analogous to animals which resolve the challenges of deep learning. Current state-of-the-art implementations of associative memory are limited to simulations with small-scale and offline paradigms. Thus, …

Human Tracking Function For Robotic Dog, Andrew Sharkey

Williams Honors College, Honors Research Projects

With the increase the increase in automation and humans and robots working side by side, there is a need for a more organic way of controlling robots. The goal of this project is to create a control system for Boston dynamics robotic dog Spot that implements human tracking image software to follow humans using computer vision as well as using hand tracking image software to allow for control input through hand gestures.

Evaluation Of Lidar Uncertainty And Applications Towards Slam In Off-Road Environments, Zachary D. Jeffries

Dissertations, Master's Theses and Master's Reports

Safe and robust operation of autonomous ground vehicles in all types of conditions and environment necessitates complex perception systems and unique, innovative solutions. This work addresses automotive lidar and maximizing the performance of a simultaneous localization and mapping stack. An exploratory experiment and an open benchmarking experiment are both presented. Additionally, a popular SLAM application is extended to use the type of information gained from lidar characterization, demonstrating the performance gains and necessity to tightly couple perception software and sensor hardware. The first exploratory experiment collects data from child-sized, low-reflectance targets over a range from 15 m to 35 m. …

Initiating Change In Care: Socially Assistive Robots, Sooraj Sushama

Theses and Dissertations

Socially assistive robots (SAR) are autonomous machines equipped with sensors and software that allow them to interact socially with humans. SAR robots are commonly used in healthcare settings to provide patients with non-clinical support, such as conversation and emotional companionship. SARs can also deliver reminders, monitor vital signs, and provide educational information about health conditions or medications. Researchers have studied SAR applications in detail. Additionally, there has been prior research on SAR where users' sociodemographic factors and technology acceptance were studied. But even though the backbone of SAR is an advanced technology, no known research has been done on users' …

Incorporating Novel Sensors For Reading Human Health State And Motion Intent Into Real-Time Computing Systems, Adam Sawyer

Masters Theses

"Integrating sensors that read states of the human body into everyday life is an increasing desire, especially with the rise of deep learning which requires vast stores of data to make predictions. This work explores integrating these sensors into the human experience through two methods and recording the results. The first of these methods integrates a MXene based field-effect transistor sensor for the 2019-nCov spike protein with a mobile app. This allows the user to read how saturated their breath is with Covid-19. The second method integrates 3D-printed pressure sensors, and a motion capture system, into a glove to read …

Space Force Design Project, Emily Greene, Ashton Orosa, Julia Patek, Nathan Doty

Williams Honors College, Honors Research Projects

The objective of our research project is to develop a lab testbed composed of a curved surface to represent a spacecraft hull, a mobile robot equipped with repair tools, and a robotic arm equipped with a laser 3D scanner. This project is part of a larger grant to the University of Akron from Space Force and Air Research Labs. The lab testbed developed in this project will be used to assist in creating and testing a software and algorithm to inspect and repair spacecraft while in orbit. The project will involve researching spacecraft hulls to create an accurate simulation bed, …

Motion Planning In Artificial And Natural Vector Fields, Bernardo Martinez Rocamora Junior

Graduate Theses, Dissertations, and Problem Reports

This dissertation advances the field of autonomous vehicle motion planning in various challenging environments, ranging from flows and planetary atmospheres to cluttered real-world scenarios. By addressing the challenge of navigating environmental flows, this work introduces the Flow-Aware Fast Marching Tree algorithm (FlowFMT*). This algorithm optimizes motion planning for unmanned vehicles, such as UAVs and AUVs, navigating in tridimensional static flows. By considering reachability constraints caused by vehicle and flow dynamics, flow-aware neighborhood sets are found and used to reduce the number of calls to the cost function. The method computes feasible and optimal trajectories from start to goal in challenging …

Enabling The Human Perception Of A Working Camera In Web Conferences Via Its Movement, Anish Shrestha

LSU Master's Theses

In recent years, video conferencing has seen a significant increase in its usage due to the COVID-19 pandemic. When casting user’s video to other participants, the videoconference applications (e.g. Zoom, FaceTime, Skype, etc.) mainly leverage 1) webcam’s LED-light indicator, 2) user’s video feedback in the software and 3) the software’s video on/off icons to remind the user whether the camera is being used. However, these methods all impose the responsibility on the user itself to check the camera status, and there have been numerous cases reported when users expose their privacy inadvertently due to not realizing that their camera is …

Developing A Miniature Smart Boat For Marine Research, Michael Isaac Eirinberg

Computer Engineering

This project examines the development of a smart boat which could serve as a possible marine research apparatus. The smart boat consists of a miniature vessel containing a low-cost microcontroller to live stream a camera feed, GPS telemetry, and compass data through its own WiFi access point. The smart boat also has the potential for autonomous navigation. My project captivated the interest of several members of California Polytechnic State University, San Luis Obispo’s (Cal Poly SLO) Marine Science Department faculty, who proposed a variety of fascinating and valuable smart boat applications.

Mars Rover Mechanical Arm & Turret, Kendall C. Chappell, Kyle D. Peterson, Rodrigo Gonzalez, Sam Cole

Mechanical Engineering

The Rover Mechanical Arm and Turret (RAT) team was originally tasked with designing and building a mechanical arm to attach to the Exo Mars rover: a project headed by Cal Poly professor, Rich Murray. The rover will be the 3rd in a series of rovers sponsored by Murray. Through ideation, comparison studies, research, and prototyping, the RAT team determined a design capable of fulfilling the sponsor’s specifications. The concept design is lightweight, durable, and capable of 4 degrees of freedom. With two links and a mechanical claw, the rover arm has the capability to retrieve small rock samples from Mars's …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Model Based Force Estimation And Stiffness Control For Continuum Robots, Vincent A. Aloi

Doctoral Dissertations

Continuum Robots are bio-inspired structures that mimic the motion of snakes, elephant trunks, octopus tentacles, etc. With good design, these robots can be naturally compliant and miniaturizable, which makes Continuum Robots ideal for traversing narrow complex environments. Their flexible design, however, prevents us from using traditional methods for controlling and estimating loading on rigid link robots.

In the first thrust of this research, we provided a novel stiffness control law that alters the behavior of an end effector during contact. This controller is applicable to any continuum robot where a method for sensing or estimating tip forces and pose exists. …

Learning Robot Motion From Creative Human Demonstration, Charles C. Dietzel

Theses and Dissertations

This thesis presents a learning from demonstration framework that enables a robot to learn and perform creative motions from human demonstrations in real-time. In order to satisfy all of the functional requirements for the framework, the developed technique is comprised of two modular components, which integrate together to provide the desired functionality. The first component, called Dancing from Demonstration (DfD), is a kinesthetic learning from demonstration technique. This technique is capable of playing back newly learned motions in real-time, as well as combining multiple learned motions together in a configurable way, either to reduce trajectory error or to generate entirely …

A Water-Surface Self-Leveling Landing Platform For Small-Scale Uavs, Mbidi Santos

Electronic Theses and Dissertations

Because many of the most widely used UAVs, such as the Vertical Take-Off and Landing (VTOL), cannot land securely on sloped or fast-changing surfaces, there is a need to design better deployment and landing stations. This document proposes an approach to design a water-surface self-leveling landing platform by implementing the best concept to be used as a safe ground for UAVs to land and deploy on open waters. After conceptualizing multiple design ideas, these options were laid out in a decision matrix with four criteria: degrees of freedom, mechanical complexity, manufacturing, and cost. The chosen concept was the spherical parallel …

Developing Reactive Distributed Aerial Robotics Platforms For Real-Time Contaminant Mapping, Joshua Ashley

Theses and Dissertations--Electrical and Computer Engineering

The focus of this research is to design a sensor data aggregation system and centralized sensor-driven trajectory planning algorithm for fixed-wing aircraft to optimally assist atmospheric simulators in mapping the local environment in real-time. The proposed application of this work is to be used in the event of a hazardous contaminant leak into the atmosphere as a fleet of sensing unmanned aerial vehicles (UAVs) could provide valuable information for evacuation measures. The data aggregation system was designed using a state-of-the-art networking protocol and radio with DigiMesh and a process/data management system in the ROS2 DDS. This system was tested to …

Factors Influencing The Effectiveness Of Managing Human–Robot Teams, Theodore B. Terry

Walden Dissertations and Doctoral Studies

Certain factors can influence the capabilities of a robot–human team by affecting their social and behavioral dynamics in a work environment. But these factors were not known due to the progressive nature of human–robot partnerships and a lack of peer-reviewed literature on the topic. This e-Delphi study aimed to identify and understand these unknown influential factors based on the participants’ insights. The overarching research question asked about the need to determine factors that might influence the effectiveness of managing human-robot teams. The basis for the conceptual framework for this study was the theory of communication used in organizational management. Twelve …

A Human-Embodied Drone For Dexterous Aerial Manipulation, Dongbin Kim

UNLV Theses, Dissertations, Professional Papers, and Capstones

Current drones perform a wide variety of tasks in surveillance, photography, agriculture, package delivery, etc. However, these tasks are performed passively without the use of human interaction. Aerial manipulation shifts this paradigm and implements drones with robotic arms that allow interaction with the environment rather than simply sensing it. For example, in construction, aerial manipulation in conjunction with human interaction could allow operators to perform several tasks, such as hosing decks, drill into surfaces, and sealing cracks via a drone. This integration with drones will henceforth be known as dexterous aerial manipulation.

Our recent work integrated the worker’s experience into …

Collaborative Human-Machine Interfaces For Mobile Manipulators., Shamsudeen Olawale Abubakar

Electronic Theses and Dissertations

The use of mobile manipulators in service industries as both agents in physical Human Robot Interaction (pHRI) and for social interactions has been on the increase in recent times due to necessities like compensating for workforce shortages and enabling safer and more efficient operations amongst other reasons. Collaborative robots, or co-bots, are robots that are developed for use with human interaction through direct contact or close proximity in a shared space with the human users. The work presented in this dissertation focuses on the design, implementation and analysis of components for the next-generation collaborative human machine interfaces (CHMI) needed for …

Factors Influencing Service Robot Adoption: A Comparative Analysis Of Hotel-Specific Service Robot Acceptance Models, Ying Dong

UNLV Theses, Dissertations, Professional Papers, and Capstones

The market for service robots is expected to expand significantly owing to the increasing relevance of service automation under the outbreak of the COVID-19 pandemic. Despite the growing managerial interest in robotic applications in the hotel industry, current robotic research has been mostly conceptual with limited robot data on hand. In light of this issue, this paper will conduct a comparative analysis of hotel-specific service robot acceptance models between the Service Robot Acceptance Model (sRAM) and the Service Robot Integration Willingness (SRIW) framework. By identifying key elements of each service robot acceptance model, this paper puts an emphasis on investigating …

Learning State-Dependent Sensor Measurement Models To Improve Robot Localization Accuracy, Troi André Williams

USF Tampa Graduate Theses and Dissertations

This dissertation proposes a novel method called state-dependent sensor measurement models (SDSMMs). Such models dynamically predict the state-dependent bias and uncertainty of sensor measurements, ultimately improving fundamental robot tasks such as localization. In our first investigation, we introduced the state-dependent sensor measurement model framework, described their properties, stated the input and output of these models, and described how to train them. We also explained how to integrate such models with an Extended Kalman Filter and a Particle Filter, two popular robot state estimation algorithms. We validated the proposed framework through a series of localization tasks. The results showed that our …

Data-Driven Learning For Robot Physical Intelligence, Leidi Zhao

Dissertations

The physical intelligence, which emphasizes physical capabilities such as dexterous manipulation and dynamic mobility, is essential for robots to physically coexist with humans. Much research on robot physical intelligence has achieved success on hyper robot motor capabilities, but mostly through heavily case-specific engineering. Meanwhile, in terms of robot acquiring skills in a ubiquitous manner, robot learning from human demonstration (LfD) has achieved great progress, but still has limitations handling dynamic skills and compound actions. In this dissertation, a composite learning scheme which goes beyond LfD and integrates robot learning from human definition, demonstration, and evaluation is proposed. This method tackles …

Motion And Emotion Estimation For Robotic Autism Intervention., Jacob M Berdichevsky

Electronic Theses and Dissertations

Robots have recently emerged as a novel approach to treating autism spectrum disorder (ASD). A robot can be programmed to interact with children with ASD in order to reinforce positive social skills in a non-threatening environment. In prior work, robots were employed in interaction sessions with ASD children, but their sensory and learning abilities were limited, while a human therapist was heavily involved in “puppeteering” the robot. The objective of this work is to create the next-generation autism robot that includes several new interactive and decision-making capabilities that are not found in prior technology. Two of the main features that …

Snr: Software Library For Introductory Robotics, Spencer F. Shaw

Master's Theses

This thesis introduces "SNR," a Python library for programming robotic systems in the context of introductory robotics courses. Greater demand for roboticists has pressured educational institutions to expand robotics curricula. Students are now more likely to take robotics courses earlier and with less prior programming experience. Students may be attempting to simultaneously learn a systems programming language, a library API, and robotics concepts. SNR is written purely in Python to present familiar semantics, eliminating one of these learning curves. Industry standard robotics libraries such as ROS often require additional build tools and configuration languages. Students in introductory courses frequently lack …

Object Manipulation With Modular Planar Tensegrity Robots, Maxine Perroni-Scharf

Dartmouth College Undergraduate Theses

This thesis explores the creation of a novel two-dimensional tensegrity-based mod- ular system. When individual planar modules are linked together, they form a larger tensegrity robot that can be used to achieve non-prehensile manipulation. The first half of this dissertation focuses on the study of preexisting types of tensegrity mod- ules and proposes different possible structures and arrangements of modules. The second half describes the construction and actuation of a modular 2D robot com- posed of planar three-bar tensegrity structures. We conclude that tensegrity modules are suitably adapted to object manipulation and propose a future extension of the modular 2D …

A Study Of Deep Reinforcement Learning In Autonomous Racing Using Deepracer Car, Mukesh Ghimire

Honors Theses

Reinforcement learning is thought to be a promising branch of machine learning that has the potential to help us develop an Artificial General Intelligence (AGI) machine. Among the machine learning algorithms, primarily, supervised, semi supervised, unsupervised and reinforcement learning, reinforcement learning is different in a sense that it explores the environment without prior knowledge, and determines the optimal action. This study attempts to understand the concept behind reinforcement learning, the mathematics behind it and see it in action by deploying the trained model in Amazon's DeepRacer car. DeepRacer, a 1/18^th scaled autonomous car, is the agent which is trained …