Engineering Commons^™

A Comprehensive Review Of Fischer-Tropsch Synthesis Processes To Produce Sustainable Diesel And Aviation Fuel, Joseph C. Steinagel

Honors College Theses

The greatest threat known to humankind today is global warming. It affects every nation on the planet and the natural order of all living things. Consequently, this ongoing crisis necessitates action to scientifically revolutionize important areas of society, including researching modern adaptations of the transportation industry. In that regard, it has been determined that an effective short-term answer to eliminating carbon emissions is to produce sustainable fuels that run cooperatively with the well-established machines of today. Sustainable aviation fuel (SAF) is one such topic of interest, and the Fischer-Tropsch synthesis process is an effective way of producing SAF. To that …

Exploration Of Characteristic Curve In Fox Float 3 Shock Dampers To Expedite Shock Damp Tuning., Joshua R. Moore

Honors College Theses

The shock absorber is an integral part of a vehicle suspension system and has a strong influence on its performance, especially in the case of motorsports. It is important to study the force versus velocity relationship, commonly known as the characteristic curve of the shock absorber both during compression and rebound. Vendor-supplied characteristics often reflect the behavior of the shock absorber in a particular setting. However, during the installation, the settings inside the shock absorber are adjusted to increase the human comfort level and performance of the vehicle. This may change the characteristic curve of the shock. The available data …

Development And Evaluation Of Blind Spot Detection Safety System Based On 2d-Lidar Technology As An Optimization For Adas Systems, Timothy J. Sutton

Honors College Theses

Distracted driving poses a significant safety hazard and will only exacerbate as the number of modern-day distractions increases. To mitigate this problem, Advanced Driver Assistance Systems (ADAS) features, such as blind spot detection, have been pivotal for the safer operation of vehicles. Towards the same objective, the goal of this research is to utilize 2D LiDAR sensors to create a blind spot detection system that will detect objects and surfaces that are outside of the driver’s field of view. A comparative analysis was conducted by developing a 2D LiDAR-based system utilizing NVIDIA Jetson Orion Nano and Python alongside an ultrasonic-based …

Traffic Light Detection And V2i Communications Of An Autonomous Vehicle With The Traffic Light For An Effective Intersection Navigation Using Mavs Simulation, Mahfuzur Rahman

Theses and Dissertations

Intersection Navigation plays a significant role in autonomous vehicle operation. This paper focuses on enhancing autonomous vehicle intersection navigation through advanced computer vision and Vehicle-to-Infrastructure (V2I) communication systems. The research unfolds in two phases. In the first phase, an approach utilizing YOLOv8s is proposed for precise traffic light detection and recognition, trained on the Small-Scale Traffic Light Dataset (S2TLD). The second phase establishes seamless connectivity between autonomous vehicles and traffic lights in a simulated Mississippi State University Autonomous Vehicle Simulation (MAVS) environment resembling a small city with multiple intersections. This V2I system enables the transmission of Signal Phase and Timing …

Comparison Of Methods For Estimating Instantaneous Turn Radius Of Ackermann Steering Vehicles, Kenneth Gennaro Stutts

Doctoral Dissertations and Master's Theses

The instantaneous turn radius of an Ackermann steering vehicle is the distance to a point in space about which the vehicle will travel in an arc during a turn. There are at least six ways to estimate instantaneous turn radius and each method uses different inputs and has distinct advantages and disadvantages. In this thesis, six different methods will be used to estimate the instantaneous turn radius of a vehicle traveling on a closed circuit. This testing will clarify similarities and differences between the methods. This thesis clarifies which method will be the most appropriate for a given set of …

Building An Application Model For Efficient Ride Booking In Ride-Hailing Industry, Nikunjkumar Butani

Electronic Theses, Projects, and Dissertations

The purpose of this study is to develop an efficient ride booking application in the ride-hailing sector. The objective of the research is to provide users with an easy way to book rides at reasonable prices and convenient times. This project helps to promote the ride-hailing industry by providing guidance for the creation of real-time applications. This project answered three questions. 1. What are the technology and infrastructure requirements for developing a consolidated online application for centralized ride sharing? 2. What are other examples of application aggregators in other industries than transportation and how do they work? 3. What are …

Av Operation And Energy Efficiency Improved Through The Evaluation And Demonstration Of Av Sensor Technology, Nicholas Brown

Dissertations

The majority of states have passed legislation or have signed an executive order enacting safe testing, development, and deployment of level 4 and level 5 autonomous vehicles (AVs) in accordance with SAE standard J3016, which has led to an increase in the frequency of AV testing. The major driving force behind the push for AVs on public roads appears to be the increases the number of AVs on the road to decrease the chances of fatalities from distracted drivers. There are reports of disengagement from companies, which are required to report them to operate within California. The continuance of disengagements …

Additive Manufacturing Of Magnetic Materials For Electric Motor And Generator Applications, Haobo Wang

Doctoral Dissertations

This work details the research into the 3D Printing, also known as Additive Manufacturing (AM), of both impermanent and permanent magnets. This work also details the research in enabling such AM magnets in electrical machine applications, primarily motors and generators. The AM processes of many types of magnets are described in detail. The material properties of such AM magnets are also described. The two main types of AM magnets that are discussed in detail are AM NdFeB, and AM Silicon Steel. The implementation of AM NdFeB as rotor magnets, and the implementation of AM Silicon Steel as rotor and stator …

Experimental Study On The Impact Of Low Thermal Inertia Thermal Barrier Coatings On Ppci-Diffusion Gci Combustion, Kunal Vedpathak

All Theses

The application of thermal barrier coatings (TBCs) has been studied in homogenous charge compression ignition (HCCI), conventional diesel combustion (CDC), and spark ignition (SI). Gasoline compression ignition (GCI) combines the low soot and NOx emissions of HCCI with combustion controllability through fuel stratification. GCI has become an interesting prospect due to the reduction in gasoline consumption due to the electrification and hybridization of the light-duty sector. It can be used as a preferred combustion mode in heavy-duty engines to reduce emissions with minimal modifications. GCI exhibits better combustion efficiency than HCCI. Advances in material technology have combined low thermal conductivity …

Advancing Winter Weather Adas: Tire Track Identification And Road Snow Coverage Estimation Using Deep Learning And Sensor Integration, Parth Kadav

Masters Theses

No abstract provided.

Safe Navigation Of Quadruped Robots Using Density Functions, Andrew Zheng

All Theses

Safe navigation of mission-critical systems is of utmost importance in many modern autonomous applications. Over the past decades, the approach to the problem has consisted of using probabilistic methods, such as sample-based planners, to generate feasible, safe solutions to the navigation problem. However, these methods use iterative safety checks to guarantee the safety of the system, which can become quite complex. The navigation problem can also be solved in feedback form using potential field methods. Navigation function, a class of potential field methods, is an analytical control design to give almost everywhere convergence properties, but under certain topological constraints and …

Experimental Investigation Of Low Thermal Inertia Thermal Barrier Coatings For Spark Ignition Engines, John Gandolfo

All Theses

The application of thermal barrier coatings (TBCs) in spark ignition (SI) engines has historically been avoided due to the knock penalty associated with higher surface temperatures induced by the ceramic layer. However, advances in low thermal inertia coatings (i.e., temperature swing coatings) that combine low thermal conductivity with low volumetric heat capacity can prevent excessively high surface temperatures during the intake stroke and reduce or avoid knock while improving performance and efficiency. This thesis experimentally evaluates the effectiveness of these low thermal inertia coatings in a single-cylinder research engine representative of modern SI engines.

First, four pistons coated with a …

Creation And Validation Of A Novel Bayesian Calibration Method With Griddy Gibbs Sampling, Hannah Stewart

All Theses

Computer models of physical systems are widely used in lieu of, or in tandem with, experimental testing. It is critical to verify the accuracy of computer models through the process of calibration. Typical calibration methods are often computationally expensive and therefore cannot be performed in real time. This thesis presents a novel Bayesian calibration method using a Griddy Gibbs sampling algorithm to improve calibration speeds. This method was verified in two applications: a location-dependent dataset in the heat transfer analysis of an engine piston, and time-dependent tire forces in a drum test. The proposed method was directly compared to a …

Cfrp Delamination Density Propagation Analysis By Magnetostriction Theory, Brandon Eugene Williams

All Dissertations

While Carbon Fiber Reinforced Polymers (CFRPs) have exceptional mechanical properties concerning their overall weight, their failure profile in demanding high-stress environments raises reliability concerns in structural applications. Two crucial limiting factors in CFRP reliability are low-strain material degradation and low fracture toughness. Due to CFRP’s low strain degradation characteristics, a wide variety of interlaminar damage can be sustained without any appreciable change to the physical structure itself. This damage suffered by the energy transfer from high- stress levels appears in the form of microporosity, crazes, microcracks, and delamination in the matrix material before any severe laminate damage is observed. This …

Controlled Manipulation And Transport By Microswimmers In Stokes Flows, Jake Buzhardt

All Dissertations

Remotely actuated microscale swimming robots have the potential to revolutionize many aspects of biomedicine. However, for the longterm goals of this field of research to be achievable, it is necessary to develop modelling, simulation, and control strategies which effectively and efficiently account for not only the motion of individual swimmers, but also the complex interactions of such swimmers with their environment including other nearby swimmers, boundaries, other cargo and passive particles, and the fluid medium itself. The aim of this thesis is to study these problems in simulation from the perspective of controls and dynamical systems, with a particular focus …

Framing Automation Trust: How Initial Information About Automated Driving Systems Influences Swift Trust In Automation And Trust Repair For Human Automation Collaboration, Scott Anthony Mishler

Psychology Theses & Dissertations

The study examines how trust in automation is influenced by initial framing of information before interaction and how later active calibration methods can further influence trust repair or dampening after an automation error in a three-experiment study. As more human drivers begin to use automated driving systems (ADSs) for the first time, their initial understanding of the system can influence their trust leading to a miscalibration of trust. Prior studies have investigated how trust develops through interactions with an automated system, but few have looked at integrating swift trust and framing to calibrate trust before interaction and investigate further active …

Accessible Autonomy: Exploring Inclusive Autonomous Vehicle Design And Interaction For People Who Are Blind And Visually Impaired, Paul D. S. Fink

Electronic Theses and Dissertations

Autonomous vehicles are poised to revolutionize independent travel for millions of people experiencing transportation-limiting visual impairments worldwide. However, the current trajectory of automotive technology is rife with roadblocks to accessible interaction and inclusion for this demographic. Inaccessible (visually dependent) interfaces and lack of information access throughout the trip are surmountable, yet nevertheless critical barriers to this potentially lifechanging technology. To address these challenges, the programmatic dissertation research presented here includes ten studies, three published papers, and three submitted papers in high impact outlets that together address accessibility across the complete trip of transportation. The first paper began with a thorough …

Improved Vehicle-Bridge Interaction Modeling And Automation Of Bridge System Identification Techniques, Omar Abuodeh

All Dissertations

The Federal Highway Administration (FHWA) recognizes the necessity for cost-effective and practical system identification (SI) techniques within structural health monitoring (SHM) frameworks for asset management applications. Indirect health monitoring (IHM), a promising SHM approach, utilizes accelerometer-equipped vehicles to measure bridge modal properties (e.g., natural frequencies, damping ratios, mode shapes) through bridge vibration data to assess the bridge's condition. However, engineers and researchers often encounter noise from road roughness, environmental factors, and vehicular components in collected vehicle signals. This noise contaminates the vehicle signal with spurious modes corresponding to stochastic frequencies, impacting damage monitoring assessments. Thus, an efficient and reliable SI …

Multiphysics Diesel Aftertreatment System Modeling For Reduced Emissions From Hybrid Electric Heavy-Duty Powertrains, Uday Srivastav

All Theses

Hybridization of heavy-duty on-road vehicles presents an opportunity to significantly reduce internal combustion engine emissions in real-world operation. These gains can be realized through the coordination of the electric drive, engine, and aftertreatment systems. Accurate Multiphysics models of all powertrains sub-systems are required to achieve the goal of reduced emissions. This research aims to develop a model of a highly complex diesel engine aftertreatment system. This study focuses on utilizing transient data for calibration and validation of the aftertreatment system and reducing the run time when compared to real-time experiments. The calibration focuses on two physical phenomena, thermal behavior and …

Virtual Prototyping And Validation For Autonomous Assistive Mobility, Amogh Venkataramana Reddy

All Theses

Physical disability in humans is something that no one has control over. It is catastrophic for people to experience it, and sometimes hinders them from enjoying the essence of life. Though disability is something people have no control over, they do have control on how they can go forward and make life beautiful and meaningful. Wheelchairs have helped people with disabilities in mobility, allowing them to move around with the help of others or sometimes on their own. This research will focus on development of an autonomous assistive mobility robot to help the disabled using virtual prototyping tools for development …

Development Of A Soft Robotic Approach For An Intra-Abdominal Wireless Laparoscopic Camera, Hui Liu

Doctoral Dissertations

In Single-Incision Laparoscopic Surgery (SILS), the Magnetic Anchoring and Guidance System (MAGS) arises as a promising technique to provide larger workspaces and field of vision for the laparoscopes, relief space for other instruments, and require fewer incisions. Inspired by MAGS, many concept designs related to fully insertable magnetically driven laparoscopes are developed and tested on the transabdominal operation. However, ignoring the tissue interaction and insertion procedure, most of the designs adopt rigid structures, which not only damage the patients' tissue with excess stress concentration and sliding motion but also require complicated operation for the insertion. Meanwhile, lacking state tracking of …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Solar-Powered Mobility: Charting The Course For A Brighter Future With Solar Vehicles, Ravi Nayak

Electronic Theses, Projects, and Dissertations

Solar-powered vehicles utilize photovoltaic panels to harness solar energy, offering a promising solution to reduce greenhouse gas emissions and promote sustainable transportation. This research project focused on the challenges and limitations of solar-powered vehicles and aims to provide solutions for their widespread adoption. The research questions explored in this study are: (Q1) How do different geographical locations and climate regions affect the feasibility and practicality of solar-powered vehicles due to variations in sunlight availability? (Q2) How has the adoption of solar-powered vehicles contributed to the reduction of greenhouse gas emissions? (Q3) What policies and incentives can promote the adoption of …

Attention And Task Engagement During Automated Driving, James Richard Unverricht

Psychology Theses & Dissertations

Many young drivers suffer fatal crashes each year in the United States at a rate approximately three times greater than more experienced drivers. Automated driving systems may serve to mitigate young drivers high crash rates but remain underexplored in research. This dissertation project examined the effects of levels of automation and interestingness of auditory clips on latent hazard anticipation in young drivers during simulated driving. Participants drove a vehicle at varying levels of vehicle automation (SAE Level 0, 2, or 3) in simulated scenarios, each containing a latent hazard event during which a boring, neutral, or interesting auditory clip was …

Parametric Automobile And Open-Jet Wind Tunnel Models And Their Application To Improved Drag Coefficient Corrections, Matthew Fujs

Electronic Theses and Dissertations

The simulation of automotive wind tunnel flow around a vehicle typically relies on the use of simplified models due to the complex, and often proprietary geometries of real test configurations. Current simplified models achieve a low computational cost in computational fluid dynamics (CFD) but fall short at qualitatively capturing a modern vehicle’s complex geometry due to being overly abstract; other models are more accurate but offer only discrete dimensional configurations. The first part of this thesis describes new parametric models for both vehicles and open-jet wind tunnels which aim to represent widely varying geometries through continuous dimensional variability, while remaining …

Improving Autonomous Vehicles Operational Performance Using Resilience Engineering, Johan Fanas Rojas

Dissertations

Autonomous vehicles are expected to revolutionize the transportation industry by providing a safer and more efficient means of transportation. However, as autonomous vehicles are deployed on public roads, they are exposed to significant risks, both in terms of safety and system performance. Recent studies have highlighted a range of errors and accidents associated with autonomous vehicles, underscoring the need for a systematic approach to improve their operational resilience. Resilience engineering, a discipline focused on designing and analyzing complex systems to better cope with unexpected events and disruptions, offers a promising framework for addressing these challenges. Despite the potential benefits of …

Enabling Energy Efficiency In Connected And Automated Vehicles Through Predictive Control Techniques, Farhang Motallebiaraghi

Dissertations

The transportation sector is a significant contributor to global energy consumption and emissions, necessitating the development of sustainable transportation systems. In this regard, connected and automated vehicles (CAVs) have emerged as a potential solution to transform the transportation industry. By harnessing advanced mapping and location technologies, Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) communication, CAVs offer the promise of improving efficiency, reducing traffic congestion, and enhancing safety and comfort. However, the adoption of CAVs also brings about various challenges, including energy efficiency concerns that need to be addressed to fully realize their potential benefits. This dissertation investigates energy-efficient control techniques for transportation …

Sensor Updates For Bigheaded Carp-Tracking Autonomous Boat, Jordan Kaufmann

Honors College Theses

Bigheaded carp are an invasive species that overpopulate and compete with the native species of Kentucky Lake as well as many other North American aquatic ecosystems. The movement patterns of Bigheaded carp are being studied nationwide by the United States Geological Survey and multiple universities. These studies ultimately seek to control their spread and reduce or reverse the ecosystem destabilization caused by this invasive species. Such studies are currently conducted manually on Kentucky Lake by graduate students affiliated with the Murray State University (MSU) Biology Department and Hancock Biological Station, and these manual studies are an arduous and time-consuming effort. …

Risk Assessments And Modeling Of Driver By Using Risk Potential Theory, Riku Kikuta

Theses and Dissertations

Recently, various self-driving and driving assistance systems such as Advanced Driver Assistance System (ADAS) have been developed with the intent to reduce the number of motor vehicle accidents. While self-driving systems have been proven to reduce traffic accidents, the systems sometimes make other drivers confused because of their mechanical behavior. To avoid confusion and possible error, it is necessary to construct self-driving systems that exhibit human-like behaviors. Risk Potential theory has been used to construct models that successfully represent driver behavior, especially expert behavior. This project uses Risk Potential theory to construct and evaluate a collision avoidance driver model which …

Vanet Applications Under Loss Scenarios & Evolving Wireless Technology, Adil Alsuhaim

All Dissertations

In this work we study the impact of wireless network impairment on the performance of VANET applications such as Cooperative Adaptive Cruise Control (CACC), and other VANET applications that periodically broadcast messages. We also study the future of VANET application in light of the evolution of radio access technologies (RAT) that are used to exchange messages. Previous work in the literature proposed fallback strategies that utilizes on-board sensors to recover in case of wireless network impairment, those methods assume a fixed time headway value, and do not achieve string stability. In this work, we study the string stability of a …