Engineering Commons^™

Environmental Health Impacts Of Small-Scale Gold Mining In East Indonesia: Mercury Pollution And Nature Conservation, Tri Edhi Budhi Soesilo, Nada Ismita Hawa, Nuraeni Nuraeni

Journal of Sustainable Mining

The expansion of small-scale gold mining impacts environmental health and socioeconomic. Research in Bombana District, one of the gold mining centers in eastern Indonesia, was conducted to explore perceptions of the impact of small-scale gold mining on human health and attitudes towards environmental conservation activities related to small-scale gold mining activities. This research uses a quantitative approach with univariate tests to identify respondent characteristics, bivariate tests (Chi-square) to test relationships and frequency differences, and multivariate analysis (regression) to test the direction and magnitude of the relationship. The perception of the impact of small-scale gold mining on human health was not …

Critical Raw Material In Mineral Elements Found In Fly Ashes From The Czech Republic Power Plant, Agnieszka Klupa

Journal of Sustainable Mining

The economic development of EU countries is limited due to limited access to a number of mineral raw materials, which necessitates actions aimed at securing the supply of CRM. For this reason, CRMs constitute elements of particular importance for the EU. The aim of the study was to assess the content of CRMs as a potential source of REY in fly ash resulting from the coal combustion in one of the power plants in the Czech Republic. In the tested ash the main phases are: glassy phase, mullite and quartz. The chemical composition of the tested fly ashes showed dominance …

Induced Oxidation Effects On Physical And Mechanical Properties Of Lignite From Tempoku, Hokkaido, Japan For Sustainable Mining Via Subsurface Cultivation And Gasification Method, Akm Badrul Alam, Noritaka Aramaki, Shuji Tamamura, Akio Ueno, Takuma Murakami, Yoshiaki Fujii, Katsuhiko Kaneko

Journal of Sustainable Mining

The lignite resource has been under consideration for the subsurface cultivation and gasification (SCG) method to produce biomethane from lignite in Hokkaido, Japan. The primary phase of the method entails initiating the oxidative transformation of lignite using an H₂O₂ solution, resulting in the formation of dissolved organic carbon (DOC), a pivotal component. To examine the effects of induced oxidation on lignite's mechanical properties, artificial oxidation tests were conducted to form DOC. While there was a slight decrease in P-wave velocity and density, the uniaxial compression and indirect tensile strengths, as well as stiffness, did not decrease. These …

A Biocompatible Hybrid Approach For The Selection Of Gas Drainage Methods In Coal Mines Based On The Best-Worst Method And Analytic Network Process, Amir Jafarpour, Mehdi Najafi, Ali Dabagh

Journal of Sustainable Mining

Methane drainage is one of the main steps in underground coal mining projects. The operation of methane extraction from coal mines/seams is important from the safety, economic, and technical points of view. Selecting the appropriate method for methane drainage is very difficult, and if the method is not chosen correctly, it will lead to environmental problems. The relationship between different influencing factors, parameters, and methods (and how they affect) is significant in choosing the method of gas drainage. In the current study, a hybrid algorithm is presented based on an Analytic Network Process (ANP) and a method based on the …

Artificial Sociality, Simone Natale, Iliana Depounti

Human-Machine Communication

This article proposes the notion of Artificial Sociality to describe communicative AI technologies that create the impression of social behavior. Existing tools that activate Artificial Sociality include, among others, Large Language Models (LLMs) such as ChatGPT, voice assistants, virtual influencers, socialbots and companion chatbots such as Replika. The article highlights three key issues that are likely to shape present and future debates about these technologies, as well as design practices and regulation efforts: the modelling of human sociality that foregrounds it, the problem of deception and the issue of control from the part of the users. Ethical, social and cultural …

Analysis Of The Key Performance Indicators Between Lithologies On Mine To Crusher, Janine Figueiredo, Vidal Torres, Rodolfo Cruz, Douglas Moreira

Journal of Sustainable Mining

The evolution of the mineral economy requires greater technological developments to find a better use of resources and reserves through the relationships between the characteristics of the rocks and the need to enable the entire mining enterprise. This study focuses on the development of new rock blasting technologies that result in a more optimized fragmentation according to the lithology in the feed of the primary crusher. This methodology is known as Mine to Crusher, through which it becomes possible to minimize costs in the future prospecting of the mine and maximize productivity. For this methodology to be developed, it was …

Analyzing The Influence Of Design And Operating Conditions On Combustion And Emissions In Premixed Turbulent Flames: A Comprehensive Review, Medhat Elkelawy Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Hagar Alm-Eldin Bastawissi, Ibrahim Ali Mousa Eng., Mohamed M. Abdel-Raouf Ibrahim Dr. Eng.

Journal of Engineering Research

Recently, premixed combustion has dominated the field of combustion research worldwide. The current work is a review that addresses the effects of design and operating regimes on the combustion and emission characteristics of premixed turbulent flames. The study accounts for recent developments aimed at overcoming combustor operability issues that influence emissions and flame stability. Various experimental setups have been utilized in investigations, with results pertaining to performance and emissions concerning premixed turbulent flames. Thus, the objective of this paper is to provide a comprehensive review of the effects of swirl vane angles and equivalence fuel-air ratios for tests conducted both …

Building For Safety: Design Considerations For Refuge Areas In Tall Buildings From Quality Management Perspective, Enass. A. Salama, Heba. M. Gaber, Ahmed. M. Selim

Journal of Engineering Research

New El Alamein City is one of the largest urban projects in Egypt, and the largest project on the north coast. Tall buildings (super high-rise buildings) are considered the prevailing trend by architectural designers to obtain the maximum view of the Mediterranean Sea. The provision of safety evacuation in emergencies for these buildings’ occupants is a crucial challenge from the Quality management point of view. In contrast, there are no sufficient architectural design guidelines for the tall buildings provided by the Egyptian code for protecting buildings from fire, especially the design of the refuge areas. This study aims to investigate …

Effect Of Organic Compounds Additives For Biodiesel Fuel Blends On Diesel Engine Vibrations And Noise Characteristics, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi Prof. Dr. Eng., E. A. El Shenawy Prof. Dr., Mahmoud Soliman Eng.

Journal of Engineering Research

The extensive consumption of petroleum fuel directly correlates with both hazardous exhaust emissions affecting human health and contributing to global warming. Initially, biodiesel fuels were proposed as a viable alternative to address these issues. This perspective finds support in numerous published studies that highlight how the significant catalytic effect of nanoparticles allows for their integration into biodiesel blends, resulting in improved combustion characteristics, reduced exhaust emissions, and enhanced performance. This study investigates the impact of additives on biodiesel fuel properties and its effects on engine performance metrics such as brake power, brake thermal efficiency, exhaust gas concentration, engine vibration, and …

Investigation Into The Impact Of Ammonia Hydroxide On Performance And Emissions In Compression Ignition Engines Utilizing Diesel/Biodiesel Blends, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

In recent times, there has been a surge in scientific endeavors aimed at combating global warming. Various methods have been employed to address this issue, including the substitution of fossil fuels with more environmentally sustainable alternatives and the combination of different fuel types. This can be achieved through the integration of innovative injection systems and the simultaneous combustion of alternative fuels alongside fossil fuels, or by modifying fuel injection systems such as in the PCCI, RCCI, or HCCI systems. In a particular research investigation, a blend of ammonia hydroxide and diesel, with volume percentages of 7.5% and 92.5% respectively, was …

Enhancing Diesel Engine Performance By Directly Injecting Blends Of Ammonium Hydroxide And Including Liquid Petroleum Gas As A Partially Premixed Charge, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Mohammed Osama Elsamadony Dr. Eng., Abdallah Salem Abdalhadi

Journal of Engineering Research

Recently, scientists have made significant strides in addressing or mitigating environmental issues. Researchers have adopted various approaches to tackle these issues, such as replacing fossil fuels with more environmentally friendly alternatives or blending multiple fuel types. This can be achieved by either integrating these two trends through the use of new injection systems and simultaneous combustion of alternative fuels with fossil fuels or by modifying fuel injection systems, exemplified by the PCCI, RCCI, or HCCI systems. Consequently, these methods have proven effective in reducing environmental pollutants, enhancing thermal efficiency, and decreasing specific fuel consumption. In this study, ammonia hydroxide and …

Experimental Investigation On Combustion And Emission Characteristics Of Co-Combustion Of Pulverized Biomass With Diesel Fuel In An Industrial Burner, Medhat Elkelawy Prof. Dr, Eng., Hagar Alm-Eldin Bastawissi, Ahmed Abou El-Yazied Prof. Dr., Saad El-Malla Dr. Eng.

Journal of Engineering Research

This study presents the combustion and emission results obtained from a laboratory furnace equipped with a 35 kW industrial burner that utilizes co-combustion of pulverized biomass and diesel fuel. The experiment compared the co-combustion of pulverized biomass and diesel fuel with diesel fuel alone. Three different loading ratios of pulverized biomass from residual beet samples were used. Temperatures were measured at various positions inside the furnace to analyze combustion performance. It was observed that increasing the biomass loading ratios led to higher flame temperatures and improved combustion compared to diesel fuel alone. The concentrations of pollutants such as Co, HC, …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

تقنيات الاضاءة الصناعية وتأثيرها فى الفراغ السكنى على السلوك الانسانى, Samah Kamal Elfeky, Walaa Ahmad Nour, Lobna Abdelfatah Agha

Journal of Engineering Research

* Lighting is considered of main items in daily life begining from natural Lighting to industrial lighting. with all of it's different shapes . it is considerdone of the most important data that point Blank spaces and works to show architectural spaces, aesthetic values through being sharp and weak, ensure borders show texture or hide Features, suggest wideness, narrowness of space as the most beautiful design don't see beautiful without good lighting which designed carefully.Due to diversity of human activities, architictums spaces and it is wideness. Increased dependence on industrial Lighting to strengthen Job of performance, beauty of internal, external …

Exploring Human Aging Proteins Based On Deep Autoencoders And K-Means Clustering, Sondos M. Hammad, Mohamed Talaat Saidahmed, Elsayed A. Sallam, Reda Elbasiony

Journal of Engineering Research

Aging significantly affects human health and the overall economy, yet understanding of the underlying molecular mechanisms remains limited. Among all human genes, almost three hundred and five have been linked to human aging. While certain subsets of these genes or specific aging-related genes have been extensively studied. There has been a lack of comprehensive examination encompassing the entire set of aging-related genes. Here, the main objective is to overcome understanding based on an innovative approach that combines the capabilities of deep learning. Particularly using One-Dimensional Deep AutoEncoder (1D-DAE). Followed by the K-means clustering technique as a means of unsupervised learning. …

Review On Quarrying Methods Suitable For Space Mining Missions, Daniel Chpolianski, Zong-Xian Zhang

Journal of Sustainable Mining

In this review paper, existing mining techniques and technologies are scrutinized for the purpose of superterrestrial use. Different aspects and challenges of a space mining mission are examined in light of the viable iron-nickel quarry operation on M-Type (metallic) asteroids. The research and findings presented in this work cover different disciplines of science and engineering, including Geology, Rock Engineering, Space Exploration, and Explosives Engineering. The particular focus of this study is on the application of shaped charge explosives in military munitions, oil well perforations, tunneling, open-pit mines, and bolder fracturing that could be deployed in asteroid mining missions. The central …

Municipal Waste Management Based On Geomechanical Assessments Of The Landfill Site Slope – A Case Study In Southern Poland, Tomasz Janoszek, Phu Minh Vuong Nguyen, Jacek Grabowski

Journal of Sustainable Mining

Over time, municipal waste landfills tend to go higher and become larger. The stability of the municipal landfill slope is one of the basic geotechnical tasks. This task ensures continuous waste deposition on the landfill surface and safety in its surroundings. With the increasing height and volume of the landfill, it is difficult to estimate the available area of the municipal landfill, where more waste can be safely deposited due to a number of variable factors, such as the geotechnical conditions of the municipal landfill, the morphological composition, age, and degree of compaction and decomposition of the deposited waste.

This …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Advancements In Characterization Of Ancient Potteries From Southeast Asia: A Review Of Analytical Techniques, Chitnarong Sirisathitkul

Makara Journal of Science

Ancient potteries offer valuable information regarding technological advancements, life dynamics, cultural diversity, and trade routes in the past. Earthenware, stoneware, and porcelain from Southeast Asia have been characterized using several analytical techniques, as reviewed in this article. Fluorescent and diffracted X-rays give rise to elemental and phase compositions, respectively. Examination of molecular bonds requires vibrational spectroscopy, which is useful for the identification of organic materials in ancient potteries. With the advent of portable X-ray fluorescence and Raman spectrometry, on-site analysis of archeological ceramics is now possible. For in-depth analysis, synchrotron light sources can provide new insights into artifacts through X-ray …

The Determination Of Pzc And Differential Capacitance Curve Of Platinum-Alkaline Polymer Electrolyte Interfaces, Chen-Xi Liu, Ze-Ping Zou, Mei-Xue Hu, Yu Ding, Yu Gu, Shuai Liu, Wen-Jing Nan, Yi-Chang Ma, Zhao-Bin Chen, Dong-Ping Zhan, Qiu-Gen Zhang, Lin Zhuang, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Alkaline polymer electrolyte (APE) is the core component of modern alkaline hydrogen and oxygen fuel cells, and its single ion conductor nature makes the "electrode/APE" interfaces different from the conventional "electrode/solution" interfaces in terms of ion distribution, electrical double layer structure and polarization behavior. Due to the complexity of the APE and the associated solid-solid interfaces, fundamental investigations are challenging and deeper understanding of the structures and properties of such interfaces is in the infant stage. In this work, we aim to investigate the double layer structure from the aspects of differential capacitance curve and potential of zero charge (PZC) …

Micropatterning And Functionalization Of Single Layer Graphene: Tuning Its Electron Transport Properties, Miao-Miao Cui, Lian-Huan Han, Lan-Ping Zeng, Jia-Yao Guo, Wei-Ying Song, Chuan Liu, Yuan-Fei Wu, Shi-Yi Luo, Yun-Hua Liu, Dong-Ping Zhan

Journal of Electrochemistry

As a promising 2D material, graphene exhibits excellent physical properties including single-atom-scale thickness and remarkably high charge carrier mobility. However, its semi-metallic nature with a zero bandgap poses challenges for its application in high-performance field-effect transistors (FETs). In order to overcome these limitations, various approaches have been explored to modulate graphene's bandgap, including nanoscale confinement, external field induction, doping, and chemical micropatterning. Nevertheless, the stability and controllability still need to be improved. In this study, we propose a feasible method that combines electrochemical bromination and photolithography to precisely tune the electron transport properties of single layer graphene (SLG). Through this …

Coal-Rock Interface Imaging Based On Acoustic Remote Reflection Logging Within Crossing Boreholes Using The Finite Element Method, Xu Hongyang, Zhai Cheng, Xia Jigen, Sun Yong, Dong Xingmeng, Lai Yongshuai, Yu Xu, Xu Jizhao, Cong Yuzhou

Coal Geology & Exploration

The presence of small geological structures is the main cause of coal and gas outbursts, making the precise detection of these structures an urgent need. High-precision detection of coal-rock interfaces is essential for identifying small structures and achieving transparent mining faces. The acoustic remote reflection logging technology, with a large detection range, a high resolution, and imaging capability, can accurately identify coal-rock interfaces. In this context, this study proposed a technique for coal-rock interface detection based on acoustic remote reflection logging within crossing boreholes. Specially, by placing acoustic detectors in crossing boreholes, the array waveforms generated by the coal-rock interfaces …

Positioning Error Compensation Of Drilling Robot Arm For Coal Mine, Liang Chunmiao, Yao Ningping, Yao Yafeng, Peng Tao

Coal Geology & Exploration

At present, the pose of drilling robots is mostly adjusted by manual remote control and manual retest in combination. Full automatic adjustment has not been achieved. Besides, due to the low precision of open-loop control and inadequate automation capability, the accurate hole positioning and automatic construction of hole groups cannot be realized by drilling robots with water exploration and discharge, outburst prevention and punching prevention in coal mines. Herein, the kinematic model of drilling arm was established by analyzing the structure and action of the drilling robot’s drilling arm. Meanwhile, the dip angle factors such as machining error, body deformation …

Development And Application Of An Automatic Online Testing Instrument For The Funnel Viscosity And Density Of Drilling Fluids, Xie Hui, Zheng Liqun, Liu Fulin, Liang Mengjia, Liu Xuan, Cai Jihua, Yang Xianyu, Hou Jiwu

Coal Geology & Exploration

In recent years, the research on the automatic performance testing technology for drilling fluids has achieved significant progress both domestically and internationally. However, automatic drilling fluid testing instruments face challenges, such as high costs, complicated structures, and restricted working environments. Given these challenges, this study developed an automatic online testing instrument for the funnel viscosity and density of drilling fluids. The testing instrument consists of mud pumping, testing, cleaning, and control modules, which are built using a programmable logic controller (PLC), an Internet of things (IoT) module, a pressure sensor, an ultrasonic sensor, a peristaltic mud pump, an electric ball …

High-Accuracy Reconstruction Of Missing Ground-Penetrating Radar Signals Based On Projection Onto Convex Sets In The Curvelet Domain, Wu Qiming, Wang Honghua, Xi Yuhe, Wang Yucheng

Coal Geology & Exploration

Influence by the acquisition environments and instrument performance, missing signals and destructed channels are inevitable in measured ground-penetrating radar (GPR) profiles. They can cause event discontinuity of reflected and diffracted waves generated by targets, severely impairing the accuracy and resolution of subsequent processing and imaging. Hence, by combining the projection onto convex sets (POCS) algorithm extensively used in image processing with the curvelet transform exhibiting high sparsity, this study proposed a high-accuracy reconstruction method for missing GPR signals based on curvelet-domain POCS. Building on the compressive sensing theory, the objective function for missing signal reconstruction based on discrete curvelet transform …

Application Of The Horizontal Seismic Profiling-Based Advance Detection Technology To The Excavation Of Rock Roadways In Coal Mines Using Tunnel Boring Machines, Zhang Sheng, Chen Zhao, Lu Song, Yang Zhanbiao, Ji Panjun, He Fei, Lu Yiqiang, Liu Jiawei

Coal Geology & Exploration

With the gradual application of full-face tunnel boring machines (TBMs) to the excavation of rock roadways in coal mines, there is an increasingly urgent need for the accurate and rapid advance prediction of unfavorable geological structures. This study analyzed the characteristics of active-source seismic wave-based advance detection methods and the applicability of the advance detection technology based on TBM seismic while drilling (TSWD) with TBM rock-breaking vibration as a seismic source. Then, by combining the geological and production conditions of coal mine roadways, this study proposed a horizontal seismic profiling (HSP)-based advance detection method applicable to the excavation of roadways …

Early Warning And Prediction Of Kicks And Lost Circulation Accident During Rescue Drilling Of Mine, Chen Weiming, Wang Jiawen, Fan Dong, Hao Shijun, Zhao Jiangpeng, Qiu Yu

Coal Geology & Exploration

In order to solve the problems such as the difficulty in early warning and prediction of kicks and lost circulation accidents during emergency rescue drilling of mine, a machine learning-based early for warning and prediction model of drilling process was established. Firstly, the accident characterization parameters of the drilling parameters in the early stage of kicks and lost circulation accidents were analyzed. Secondly, the accident characterization parameters were cleaned and processed. On this basis, XGBoost and early warning model was used to carry out the early diagnosis and identification of kicks and lost circulation accidents. Then, the PSO-LSTM accident development …

Operation Process Identification For Intelligent Drill Rig Base On Analytic Hierarchy Process, Zhu Qianxiang, Luo Pengping, Wang Longpeng, Xing Wang, Wang Tianlong

Coal Geology & Exploration

It is very difficult to automatically identify the current process during the intelligent construction of coal mine drill rigs. In response to this, an operation process identification method was proposed, which includes hierarchical modeling of drill rig operation and probability inference of process execution. Firstly, the coupling process among the components of different granularity during the operation of drill rig is described and modeled based on the hierarchical analysis method, which reveals the interactive characteristics between equipment, function and system during the execution of each process. Secondly, Bayesian probabilistic reasoning method is introduced based on the above research to establish …

Analysis On Working Characteristics Of Cam-Roller Impact Mechanism Of Rotary Percussion Drilling Tool, Sun Yangqing, Yi Xianzhong, Wan Jifang, Ma Jianqi, Wu Jiwei, Yi Jun, Yin Guangpin

Coal Geology & Exploration

Rotary percussion drilling tools can effectively improve their rock breaking efficiency in the deep and hard strata, thus having broad application prospects. The cam-roller is the key mechanism to realize the impact action, but the complex and changeable downhole environment leads to serious damage to the mechanism, which in turn affects the efficiency of rock breaking. Based on the test drilling data of rotary impact drilling tools in several wells, the cam-roller dynamics model was established, the working characteristics under different strokes, speeds and drilling pressures were analyzed by Autodyn (explicit dynamics), and the deformation characteristics of the mechanism were …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.