Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 6 of 6
Full-Text Articles in Engineering
Investigation Of Coo Ato For Solar Cells And Infrared Sheaths, Manopriya Devisetty Subramanyam
Investigation Of Coo Ato For Solar Cells And Infrared Sheaths, Manopriya Devisetty Subramanyam
USF Tampa Graduate Theses and Dissertations
Solar as an energy source is expected to grow fastest from now to 2050. Increasing the efficiency is usually achieved by increasing the short circuit current density (JSC) and/or the fill factor. Improving the efficiency of solar cells will be an ongoing effort.Structurally solar technologies can be classified into two types, wafer-based and thin-film-based. Wafer solar cells have been used in this study. The anti-reflective layer on top of solar cells has been fabricated by a process called electrospinning to tune the solar cells' top surface with the desired thickness and dimensions of the nanofibers. The nanofibers' dimensions, shape, and …
Fabrication And Characterization Of Polycarbonate Polyurethane (Pcpu) Nanofibers Impregnated With Nanofillers, Hruday Chand Katakam
Fabrication And Characterization Of Polycarbonate Polyurethane (Pcpu) Nanofibers Impregnated With Nanofillers, Hruday Chand Katakam
USF Tampa Graduate Theses and Dissertations
Polycarbonate polyurethane (PCPU) has been studied as a novel polymer impregnated with nanoparticles for improved mechanical, thermal and adhesion properties [4]. This study investigates the synthesis of polycarbonate polyurethane (PCPU) polymeric nanofiber membranes by the process of electrospinning. This study further examines all the parameters associated with electrospinning a novel PCPU polymeric solution impregnated with nanofillers, such as nanoparticles, to produce fiber membranes. Tetrahydrofuran (THF) and N, N dimethylformamide (DMF) are used as solvents to dissolve PCPU polymer. One percent (1%) of nanofillers like silver and silica nanoparticles are added to PCPU polymer solution to investigate the impact on polymer …
Investigation Of Opuntia Ficus-Indica Mucilage Nanofiber Membrane Filtration For Water Systems, Rasudha Muppaneni
Investigation Of Opuntia Ficus-Indica Mucilage Nanofiber Membrane Filtration For Water Systems, Rasudha Muppaneni
USF Tampa Graduate Theses and Dissertations
This work investigates the fabrication, characterization and testing of Opuntia ficus-indica mucilage nanofibers to be utilized in water filtration systems. These mucilage nanofibers are formed using different polymers through a process called electrospinning. The polymers used to promote the formation of nanofibers are poly vinyl alcohol (PVA) and polystyrene (PS). The mucilage is a jelly like substance extracted from the pads of the cactus plant. It is a mixture of proteins, complex polysaccharides and monosaccharaides. It is an inexpensive, non-toxic, biodegradable and biocompatible material which is present in abundance. The mucilage extracted from the pads is mixed with acetic acid …
Fabrication And Comparison Of Electrospun Cobalt Oxide-Antimony Doped Tin Oxide (Coo-Ato) Nanofibers Made With Ps: D-Limonene And Ps: Toluene, Manopriya Devisetty Subramanyam
Fabrication And Comparison Of Electrospun Cobalt Oxide-Antimony Doped Tin Oxide (Coo-Ato) Nanofibers Made With Ps: D-Limonene And Ps: Toluene, Manopriya Devisetty Subramanyam
USF Tampa Graduate Theses and Dissertations
This work investigates the fabrication, process optimization, and characterization of cobalt oxide-antimony doped tin oxide (CoO-ATO) nanofibersusing polystyrene (PS) solutions with toluene orD-limonene as solvents. These nanofibers are produced by anelectrospinning process. Nanofibers are fabricated using polymeric solutions of CoO doped ATO and mixtures of PS: D-limonene and PS:toluene. PSis a base aromatic organic polymer, a non-toxic material, and a versatile catalyst for fiber formation. PSsolutions are made by mixing polystyrene beads and D-limonene or toluene at specific weight percentages. These polymeric solutions of PS: D-limonene and PS:toluene are then mixed with CoO-ATO at various weight percentages. The two solutions …
Exergetic Life Cycle Assessment Of Electrospun Polyvinylidene Fluoride Nanofibers, Salman Ali Abbasi
Exergetic Life Cycle Assessment Of Electrospun Polyvinylidene Fluoride Nanofibers, Salman Ali Abbasi
USF Tampa Graduate Theses and Dissertations
Assessing the sustainability of nanomanufacturing products and processes has been difficult to achieve using conventional approaches mainly due to an inadequate inventory, large process-to-process variation, and a dearth of relevant toxicology data for nanomaterials. Since these issues are long term in nature, it is required to create hybrid methodologies that can work towards filling the existing gaps. Merging thermodynamic techniques such as the exergy analysis with environmental assessments can help make better, more informed choices while providing an opportunity for process improvement by enabling to correctly quantify efficiency loss through the waste stream, and by locating the exact areas for …
Fabricating And Characterizing Physical Properties Of Electrospun Polypeptide-Based Nanofibers, Dhan Bahadur Khadka
Fabricating And Characterizing Physical Properties Of Electrospun Polypeptide-Based Nanofibers, Dhan Bahadur Khadka
USF Tampa Graduate Theses and Dissertations
This dissertation has aimed to fabricate polypeptide based biomaterial and characterize physical properties. Electrospinning is used as a tool for the sample fabrication. Project focused on determining the feasibility of electrospinning of certain synthetic polypeptides and certain elastin-like peptides from aqueous feedstocks and to characterize physical properties of polymer aqueous solution, cast film and spun fibers and fiber mats. The research involves peptide design, polymer electrospinning, fibers crosslinking, determining the extent of crosslinking, fibers protease degradation study, fibers stability and self-organization analysis, structure and composition determination by various spectroscopy and microscopy techniques and characterization of mechanical properties of individual suspended …