Engineering Commons^™

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Increasing The Impact Of Utah State University’S Extension Water Check Program With 5-Second Metering, Mahmud Aveek, David E. Rosenberg, Camilo Bastidas, Jeffery S. Horsburgh, Belize A. Lane, Kelly Kopp, Peter Mayer, Joe Fazio

Reports

Study Goal – Increase the volume of water saved by the Utah State University (USU) Extension landscape Water Check program because outdoor water use is the largest component of residential use with the largest opportunity to reduce use. We used 5-second water use data collected with Flume Smart Home Water Monitoring devices (Figure 1) at residential homes before and after a Water Check (Box 1; Figure 2) to answer four questions:

1. How much water did households save?

2. Which Water Check recommendations did participants implement?

3. Why did participants implement some recommendations and not others?

4. How to further reduce landscape water use?

Increasing The Impact Of Utah State University's Extension Water Check Program With 5-Second Metering, Mahmud Aveek, David E. Rosenberg, Camilo Bastidas, Jeffery S. Horsburgh, Belize A. Lane, Kelly Kopp, Peter Mayer, Joe Fazio

Reports

Study Goal – Increase the volume of water saved by the Utah State University (USU) Extension landscape Water Check program because outdoor water use is the largest component of residential use with the largest opportunity to reduce use. We used 5-second water use data collected with Flume Smart Home Water Monitoring devices (Figure 1) at residential homes before and after a Water Check (Box 1; Figure 2) to answer four questions:

1. How much water did households save?
2. Which Water Check recommendations did participants implement?
3. Why did participants implement some recommendations and not others?
4. How to further reduce landscape water use?

Supporting The Delivery Of Information Management And Bim In Ireland: Learnings From Selected International Regions, Alan Hore, Ciaran Mcnally, Adekunle Qudus Adeleke, Wahib Saif

Reports

The Executive Summary introduction the report recommendations for Build Digital with respect to information management and the use of BIM as a critical vehicle of innovation to unlock improved project outcomes in construction.

How Can Visual Programing Be Used To Aid The Development Of A Structural Scheme Design Process Utilising Geometric Data Within An Architectural Revit Model?, Ed Carthy, Kieran Lakhera O'Shea

Reports

The early-stage structural scheme design of a building is a complex task requiring the collection of multiple information categories such as geometry, loading and materials. The collection and review of this information is traditionally conducted in a 2D environment. This is inefficient, time-consuming, and tedious. This paper provides a review of how structural engineers’ understanding and implementation of BIM has evolved significantly in recent years, validated by extant literature in areas such as BIM automation, visual programming, and structural optimisation in the structural engineering sector. Structural engineers are growing more aware that BIM provides a vast repository of data to …

Dlr Covid-19 Mobility Review: Evaluation And Review Of The Phase 1 Covid-19 Mobility And Public Realm Works Undertaken By Dún Laoghaire Rathdown County Council, Sarah Rock Dr., Dave O'Connor, Lorraine D'Arcy Dr., Odran Reid

Reports

Evaluation and Review of the Phase 1 Covid-19 Mobility and Public Realm Works undertaken by Dún Laoghaire- Rathdown County Council.

Interim findings, June 2021.

Report On The Methodological Framework Of New Pedagogical Approaches – Scenarios Of Future Engneering Education, Bente Nørgaard, Claus Spliid, Una Beagon, Klara Kövesi, Brad Tabas, Riitta Lehtinen, Jenni Koponen, Johannes Spaas

Reports

This report summarises the methodology used to create scenarios as part of the innovative teaching pedagogies proposed in the A-STEP 2030 (Attracting diverSe Talent to the Engineering Professions of 2030) project. This project is an EU Erasmus+ project funded under call number 2018-1-FR01-KA203- 047854. The report begins by describing the overall project and the organisation of the learning and teaching activity. The scenarios were co-created with student participants and academic staff in the learning and teaching activity - A-STEP 2030 Summer School which was held in August 2021. The specific scenarios created by participants are described in this report and …

The A-Step 2030 Summer School, Una Beagon, Johannes Spaas, Klara Kövesi, Brad Tabas, Bente Nørgaard, Claus Spliid, Riitta Lehtinen, Jenni Koponen

Reports

This report outlines the design and evaluation of the Learning and Teaching Activity which forms part of the A-STEP 2030 (Attracting diverSe Talent to the Engineering Professions of 2030) project. This project is an EU Erasmus+ project funded under call number 2018-1-FR01-KA203-047854. The document begins by explaining the purpose and aims of the overall research project and more specifically, the background to the design of the Learning and Teaching Activity. The report provides a detailed description of the organisation of the learning and teaching activity and a summary of the feedback received from participants. Exemplars of the future scenarios co-created …

A Critical Analysis Of The Application Of Visual Programming To Increase Efficiency In Bim Object Metadata Delivery Workflows During The Delivery Phase Of An Asset, Kieran Lakhera O'Shea, Davitt Lamon

Reports

Uniclass 2015 data generally seems to be overlooked in favour of the more valuable COBie data when discussion begins about BIM model metadata and, at present, few studies are devoted to it and its delivery through automated methodologies. Classification is a key part of the BIM process – without the ability to distinguish one object from another a BIM model lacks the definition required for implementing downstream applications such as functional simulations, compliance checking and other automated technologies. The use of classification data is, of course, not the only way of identifying objects but it is currently the only standardised …

Disaster Analysis Using Satellite Image Data With Knowledge Transfer And Semi-Supervised Learning Techniques, Palavi Jain

Reports

With the increase in frequency of disasters and crisis situations like floods, earthquake and hurricanes, the requirement to handle the situation efficiently through disaster response and humanitarian relief has increased. Disasters are mostly unpredictable in nature with respect to their impact on people and property. Moreover, the dynamic and varied nature of disasters makes it difficult to predict their impact accurately for advanced preparation of responses [104]. It is also notable that the economical loss due to natural disasters has increased in recent years, and it, along with the pure humanitarian need, is one of the reasons to research innovative …

Trades And Apprenticeship Survey 2020: Focus On Wet Trades, Roisin Murphy

Reports

CIF commissioned the Trades and Apprenticeship Survey 2020 – Focus on Wet Trades report to investigate the causes and implications of the low numbers entering wet trades (Bricklaying, floor and wall tiling, Painting and Decorating and Plastering). The objective for commissioning expert research was to fully understand whether the current model is appropriate for the sector or simply requires a new approach.

The research, carried out by Dr. Róisín Murphy, undertook a multi-stakeholder analysis, to determine the causes and challenges facing wet trades and apprenticeship in Ireland.

The report proposes six recommendations and addresses an Apprenticeship model review, Education and …

Economic Analysis Of Productivity In The Irish Construction Sector, Kpmg, Fac, Róisín Murphy Dr, Avril Behan

Reports

Important strides to enhance productivity in the construction sector have been taken by both industry and Government in recent years. However, a collaborative, sectoral wide strategy to drive further increases in productivity is required, with the coordinated participation of all stakeholders across the full life cycle of a project. This report, commissioned by the Department of Public Expenditure and Reform (DPER), produced by KPMG and Future Analytics Consulting Ltd. (FAC) and peer reviewed by TU Dublin, aims to understand and address the reasons for low levels of productivity in the Irish construction sector and identify specific recommendations and actions that …

Air Quality Modelling For Ireland, Aoife Donnelly, Bruce Misstear, Brian Broderick

Reports

Air pollution is the primary environmental cause of premature death in the EU (European Commission, 2013) and the most problematic pollutants across Europe have consistently been oxides of nitrogen (e.g. nitrogen dioxide (NO₂)), particulate matter (e.g. PM₁₀, PM_2.5) and ozone (O₃). While measurements form an important aspect of air quality assessment, on their own they are unlikely to be sufficient to provide an accurate spatial and temporal description of the pollutant concentrations for exposure assessment and moreover they cannot provide information regarding future air quality. Annex XVI of 2008/50/EC requires member states …

Report From The Stem 2026 Workshop On Assessment, Evaluation, And Accreditation, Rebecca Bates, Angela Arnold, Cary Komoto, Peggy Brickman, R. Alan Cheville, Elizabeth Longley, Jose Mestre, Mihaela Sabin, James Warnock

Reports

A gathering of science, technology, engineering, and math (STEM) higher education stakeholders met in November 2018 to consider the relationship between innovation in education and assessment. When we talk about assessment in higher education, it is inextricably linked to both evaluation and accreditation, so all three were considered. The first question we asked was can we build a nation of learners? This starts with considering the student, first and foremost. As educators, this is a foundation of our exploration and makes our values transparent. As educators, how do we know we are having an impact? As members and implementers of …

Engineering Skills Requirements For Sustainable Development And Achieving The Sdgs - Outcomes Of Focus Groups Held In Ireland, France, Denmark And Finland As Part Of A-Step 2030 Project Activity 1: Task 2, Una Beagon, Brian Bowe

Reports

No abstract provided.

The Heat Is On: The Capacities Required For The Establishment And Sustainability Of Community-Owned Renewable Energy District Heating Systems In Ireland, Gerard Doyle

Reports

International reviews of countries’ progress at tackling climate change show that Ireland is making small levels of progress on tackling issues associated with climate change. This paper will examine a theoretical framework, referred to as capacity analysis, to explain the capacities that need to be in place for the successful implementation of community-owned renewable energy district heating initiatives. The theoretical framework employed here is based on the ‘conceptual framework’ developed by Pringle which consists of four categories of capacity. The research methodology involves a case study with cases from Austria, Northern Ireland, the Republic of Ireland, Wales and Scotland. The …

Intellectual Output 1 (I01): Skillsfocus 2030: A Model Of Skills And Attributes Needed For Engineers To Achieve The Sdgs, Una Beagon, Brian Bowe, Klara Kövesi, Christiane Gillet, Brad Tabas, Bente Nørgaard, Claus Spliid, Riitta Lehtinen

Reports

No abstract provided.

Report On The Future Role Of Engineers In Society And The Skills And Competences Engineering Will Require, Brad Tabas, Una Beagon, Klara Kövesi

Reports

This literature review outlines the current state of the art knowledge in relation to the influence of diversity, attractiveness of the engineering profession and the skills and competencies required of engineers to achieve the SDGs. We aim to answer the overall research question: How do engineering educators develop new learning and teaching approaches (methods) that will attract a diverse group of students (and mature learners) whilst achieving the SDGs in 2030? The main objective of the A-STEP 2030 project is to create an attractive and fascinating learning environment to encourage young people with diverse backgrounds to engage in engineering studies …

Simple Parameterized Models For Predicting Mobility, Burial And Re-Exposure Of Underwater Munitions. Serdp Final Report Mr-2224, Carl Friedrichs, Sarah E. Rennie, Alan Brandt

Reports

A compilation of 761 observations of scour-induced burial and 406 observations of initiation of motion of UXO-like objects are presented. The main factors that increase the scour-induced burial-to-diameter ratio (B/D) under (i) currents and (ii) waves are the (i) Shields parameter (S) and (ii) Keulegan-Carpenter number. For cylinders under waves, B/D additionally increases as the current component parallel to wave orbitals decreases, as S increases, and as the angle between wave orbitals and a cylinder’s axis increases. Cylinders bury most, then spheres, and conical frustums bury least. Simple models dependent on these variables explain 85% of observed variance in B/D. …

Capacity Enhancement And Flexible Operation Of Unified Power Quality Conditioner In Smart And Microgrid Network, Shafiuzzaman Khan Khadem, Malabika Basu, Michael Conlon

Reports

This paper presents a new approach to design Unified Power Quality Conditioner (UPQC), termed as distributed UPQC (D-UPQC), for smart or microgrid network where capacity enhancement and flexible operation of UPQC are the important issues. This paper shows the possibility of capacity enhancement and operational flexibility of UPQC through a coordinated control of existing resources. This UPQC consists of a single unit series active power filter (APFse) and multiple shunt APF (APFsh) units in a distributed (parallel) mode. These units can be connected with a common/separate dc linked capacitor(s). The requirement of capacity enhancement arises from the flexibility to cope …

Engineered Nanomaterials And Human Health: Part 1. Preparation, Functionalization And Characterization (Iupac Technical Report), Vladimir Gubala, Linda J. Johnston, Harald Friedrich Krug, Colin J. Moore, Christopher K. Ober, Michael Schwenk, Michel R. Vert

Reports

Research on engineered nanomaterials (ENM) has progressed rapidly from the very early stages of studying their unique, size-dependent physicochemical properties and commercial exploration to the development of products that influence our everyday lives. We have previously reviewed various methods for synthesis, surface functionalization, and analytical characterization of ENM in a publication titled 'Engineered Nanomaterials: Preparation, Functionalization and Characterization'. In this second, inter-linked document, we first provide an overview of important applications of ENM in products relevant to human healthcare and consumer goods, such as food, textiles, and cosmetics. We then highlight the challenges for the design and development of new …

Engineered Nanomaterials And Human Health: Part 2. Applications And Nanotoxicology (Iupac Technical Report) (Review), Vladimir Gubala, Linda J. Johnston, Harald Friedrich Krug, Colin J. Moore, Christopher K. Ober, Michael Schwenk, Michel R. Vert

Reports

Research on engineered nanomaterials (ENM) has progressed rapidly from the very early stages of studying their unique, size-dependent physicochemical properties and commercial exploration to the development of products that influence our everyday lives. We have previously reviewed various methods for synthesis, surface functionalization, and analytical characterization of ENM in a publication titled 'Engineered Nanomaterials: Preparation, Functionalization and Characterization'. In this second, inter-linked document, we first provide an overview of important applications of ENM in products relevant to human healthcare and consumer goods, such as food, textiles, and cosmetics. We then highlight the challenges for the design and development of new …

Trades And Apprenticeships Skills Survey: The Employers Perspective, Eoghan Ó Murchadha, Roisin Murphy

Reports

The construction sector in Ireland has gone through a period of extremes in the last decade, from an exceptionally high growth to deep and prolonged recession. The backdrop to this report, however, is one of favourable economic and industry conditions. Economic growth is positive, exchequer balances are improving, unemployment continues to decline and sentiment within the construction industry is strong across most sub-sectors.

The construction labour market however, remains in a state of disequilibrium. The severe recession had devastating consequences on construction firms in Ireland resulting in company closures, redundancy and mass emigration. At the same time the number of …

Progress Report Norfolk, Virginia, Federal Flood Risk Management Study, Jian Shen, Rico Wang, Mac Sisson

Reports

The City of Norfolk and Norfolk District, U.S. Army Corps of Engineers (USACE), are partnering to conduct a Flood Risk Management Study (FRMS) to determine the Federal interest and feasibility of alternatives to mitigate coastal flooding risk in the City. The FRMS is in the Feasibility Study (FS) phase in which alternatives are proposed and developed to conceptual/preliminary design level, benefit/cost analyses are conducted, and environmental studies are completed to comply with the National Environmental Policy Act (NEPA). The magnitude of the feasibility study will require an Environmental Impact Statement (EIS).

A component of the FS/EIS is the analysis of …

Building Information Modelling In Ireland 2017, Barry Mcauley, Alan Hore, Roger West

Reports

BIM is perhaps the most topical issue in construction throughout the world at present, as it is associated with solving so many of the present concerns in our industry.

Our lack of housing, shortage of skilled workers, poor document management, overrunning project budgets and sustainability challenges are just a few of the challenges that BIM promises to assist in solving.

The increasing importance of “digitisation” to modern construction and engineering businesses is becoming more apparent as more and more clients are explicitly asking for BIM in the design and delivery of new facilities and infrastructure.

This report provides a snapshot …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

An Introduction To Defining Cost Estimates For Mechanical And Electrical Services Using The Nrm1, Charles Mitchell

Reports

Determining an accurate value for the supply and installation of mechanical and electrical services is a difficult task due to the level of specialisation and variance within this sector of the industry. The level of specialised knowledge and the ever changing technology has prevented the Quantity Surveyor from taking a firm hold on the cost estimation of these services. Cost estimates have previously been prepared by consultant services engineers or based on costs provided by these consultants.

However, employers nowadays require more cost certainty in the estimates of costs. As a direct result the New Rules of Measurement 1 (NRM1) …