Engineering Commons^™

Mining High Impact Combinations Of Conditions From The Medical Expenditure Panel Survey, Arjun Mohan

Masters Theses

The condition of multimorbidity — the presence of two or more medical conditions in an individual — is a growing phenomenon worldwide. In the United States, multimorbid patients represent more than a third of the population and the trend is steadily increasing in an already aging population. There is thus a pressing need to understand the patterns in which multimorbidity occurs, and to better understand the nature of the care that is required to be provided to such patients.

In this thesis, we use data from the Medical Expenditure Panel Survey (MEPS) from the years 2011 to 2015 to identify …

Fungi In Flux | Designing Regenerative Materials And Products With Mycelium, Arvind Bhallamudi

Masters Theses

As the world grapples with the escalating crisis of climate threats and environmental degradation, this research delves into the synergistic potential of design and biology, developing safe and sustainable materials for applications in prototyping, furniture and interior design. Harnessing the power of a unique organism - fungi, the study proposes an accessible, efficient, and resilient material resource system. It utilizes local waste streams and mycelium (the vegetative part of fungi) to grow functional structures. An experimental and small-scale protocol is modeled by testing bio-fabrication and bio-printing methods. The composites' performance qualities and characteristics are evaluated through mechanical testing and a …

A Machine Learning Approach For Predicting Clinical Trial Patient Enrollment In Drug Development Portfolio Demand Planning, Ahmed Shoieb

Masters Theses

One of the biggest challenges the clinical research industry currently faces is the accurate forecasting of patient enrollment (namely if and when a clinical trial will achieve full enrollment), as the stochastic behavior of enrollment can significantly contribute to delays in the development of new drugs, increases in duration and costs of clinical trials, and the over- or under- estimation of clinical supply. This study proposes a Machine Learning model using a Fully Convolutional Network (FCN) that is trained on a dataset of 100,000 patient enrollment data points including patient age, patient gender, patient disease, investigational product, study phase, blinded …

A Study Of The Link Between Poor Quality And Poor Performance Of Various Health Care Indicators, Lamara L. Glass

Masters Theses

Abstract

Purpose of the Research

The purpose of present research investigation is to explore the correlation between poor performance indicators and poor quality in the Health care industry and to present an idea on improving the quality of the outcome in health care services by altering the KPIs.

The Nature of the Problem

The quality of healthcare may be evaluated using a variety of parameters, including safety, efficacy, and person-centeredness. For example, the former relates to the degree of precision with which procedures may produce desired results. External comparisons between different health care facilities, as well as KPIs specified for …

Implementation Of The Plan For Every Part (Pfep) Tool And Additional Methodologies For Operational Improvement., Bernardo Luis Borges Pedroso

Masters Theses

The work focused on the inventory management of Dimplex Thermal Solutions, which had a profoundly overstocked warehouse and was suffering from significant operating expenses, due to the absence of a grounded ordering policy and the need to rent external storage space, respectively.

The main objective of the thesis was to solve the primarily mentioned problems, by constructing a Plan For Every Part (PFEP) tool, followed by the application of an inventory policy and the proposal of a redesigned warehouse layout, to compute ideal stock values and calculate the footprint requirements for Dimplex’s updated inventory levels, respectively. The execution step concerned …

A Two-Phase Multicommodity Flow Approach For Classroom Assignment, Hannah Smith

Masters Theses

A common problem faced by universities is the assignment of courses to campus-hosted spaces. An optimal solution is difficult to reach, given the number of constraints present. Increasing student enrollment across campus leads to a need for a model that optimally assigns courses to spaces that maximizes the total number of courses taught in person. This paper poses a solution to this problem by generating a two-phase model to allocate courses to campus-hosted spaces. The two-phase approach to classroom assignment consists of a minimum-weighted bipartite matching for priority assignment and a multicommodity flow model to assign remaining courses. The optimal …

Systematic Review Of Driver Distraction In The Context Of Advanced Driver Assistance Systems (Adas) & Automated Driving Systems (Ads), Apoorva Pramod Hungund

Masters Theses

Advanced Vehicle Systems promise improved safety and comfort for drivers. Steady advancements in technology are resulting in increasing levels of vehicle automation capabilities, furthering safety benefits. In fact, some of these vehicle automation systems are already deployed and available, but with promised benefits, such systems can potentially change driving behaviors. There is evidence that drivers have increased secondary task engagements while driving with automated vehicle systems, but there is a need for a clearer scientific understanding of any potential correlations between the use of automated vehicle systems and potentially negative driver behaviors.

Therefore, this thesis aims to understand the state …

A Variable Node Optimization Model For Byzantine Fault Tolerant Systems, Ian Robert Fulton

Masters Theses

“Byzantine Fault Tolerance (BFT) has been a major subject of study over the last two decades with increasing societal dependance on secure, correct, and reliable computer systems and online services. This research presents a model for high-level optimization of emerging systems that rely on these BFT algorithms and use a variable numbers of decision nodes. The model highlights the relationship between the security of a system and its efficiency. Two experiments were performed to determine system performance by varying the number of compromised nodes, decision nodes, and total nodes. They examine the probability that a transaction will be compromised based …

State Level Trends In Renewable Energy Procurement Via Solar Installation Versus Green Electricity, Eric Michael Hanson

Masters Theses

“In the past 5 years, consumer options for procuring renewable energy have increased, ranging from rooftop solar installation to utility green pricing to Community Choice Aggregation. These options vary in terms of costs and benefits to the consumer as well as grid integration implications. However, little is known regarding how the presence of a wide range of options for utility-scale renewable procurement affects demand for distributed residential solar installations. In theory, there are three possible relationships, (1) positive correlation, where utility-scale and distributed resources complement each other to increase overall production, (2) negative correlation, where utility-scale and distributed resources are …

Decomposition Approach To Parametric Nonconvex Regression; Nuclear Resonance Analysis, Jordan L. Armstrong

Masters Theses

Parameterized nonconvex regression is a difficult problem for any optimization solver packages, often resulting in approximations and linearizations of the problem in order to be able to arrive a solution, if the problem is even solvable at all. These changes to the initial problem are largely dependent upon having appropriate domain knowledge and still often times result in a sizable gap between the achieved solution and the best true solution. We propose a novel method of decomposing the global problem into small, overlapping windows. Thus, the independent windows are now solvable. Subsequently, we offer a novel, sequential method of parameter …

Robustness Of Supply Chain Synchronization Strategies, Andrew Frere

Masters Theses

Modern manufacturing systems dealing with complex assemblies with large numbers of parts present particular challenges in the realm of supply chain management. Complex assemblies, such as those found in aerospace and automobile manufacturing, require thousands of parts to come together at the right time for final assembly. The large number of parts, often coming from hundreds of suppliers, combined with unreliable delivery times and high cost of many of these components can lead to incredibly high inventory costs and assembly delays. Typically, variable delays in part delivery are compensated for by either keeping a buffer of safety stock or a …

Comparing And Improving The Design Of Physical Activity Data Visualizations, Peter M. Frackleton

Masters Theses

Heart disease is a leading cause of death in the United States, and older adults are at highest risk of being diagnosed with heart disease. Consistent physical exercise is an effective means of deterring onset of heart disease, and physical activity tracking devices can inspire greater activity in older adults. However, physical activity tracking device abandonment is quite common due to limitations on what can be learned from the activity data that is collected. Better data visualization of physical data presents an opportunity to surpass these limitations. In this thesis, a task-based human subject study was performed with three different …

Uht Milk: Supply Chain Based Shelf Life Assessment And Risk Mitigation, Sagar Rameshwar Padghan

Masters Theses

Transportation and storage conditions in the perishable food supply chain play a vital role in product shelf life. This study focuses on UHT milk, a variant of milk that has a shelf life of up to 12 months in ideal conditions. However, poor transportation and storage practices can diminish its shelf life and result in quality losses resulting from milk spoilage. UHT milk literature focuses on chemical and physical analysis of changes in milk. There have been limited number of studies that characterize supply chain effects on the shelf life of milk and other perishable products.

This study analyzes supply …

Periodic Replenish And Recount Policy To Address Record Inaccuracy From Stock Loss, Colton K. Ku

Masters Theses

Inventory record inaccuracy (IRI) often arises in retail environments due to unaccounted stock loss. Theft, misplacement, spoilage, and transaction errors will reduce the true inventory values without changing the inventory record. As previous inventory replenishment policies assume perfect record accuracy, increasing IRI can cause unexpected stockout events, mistimed reorders and replenishment freezes. Solutions to rectifying IRI vary from the use of improved tracking technologies to prevent it initially occurring at all to recounting programs which estimate true inventory value. Unfortunately, in retail environments, high‑tracking technology is unsuitable and continuous counting programs are too costly. To address the limitations of current …

Examining The Empirical Relationship Between Subjective Fatigue And Employee Work Engagement In A Heavy Workload Manufacturing Environment, Prashanth Balasubramanian

Masters Theses

The purpose of this study was to examine the empirical relationship between Subjective Fatigue and Employee work engagement among employees working under heavy workload conditions in Tennessee, USA. The questionnaire was developed by reviewing extant literature and the factors that were chosen were subjected to exploratory factor analysis. Post elimination of the weakly loaded factors, a questionnaire based on the selected factors was designed to measure the subjective levels of fatigue. The data was collected from two manufacturing company sites from East Tennessee and was subjected to analysis using IBM SPSS and SmartPLS softwares. As a part of the SEM …

Identifying Scotomata In Hazard Identification Caused By Ignorance And Overconfidence, Allen Johanson

Masters Theses

The manufacturing and construction industries are two of the most dangerous professions, and employees are frequently exposed to hazards and hazardous conditions which can lead to serious injury or even death. An observed phenomenon, frequently called the Dunning-Kruger Effect states that unskilled people are often unaware of their shortcomings and those with the higher-level skills often underestimate their abilities. This study examines employees’ training, years of experience, and performance to gauge any correlations among these variables in the area of hazard awareness. The goal of this study is to help individuals to recognize blind spots in their knowledge to identify …

Agent-Based Model Of Broadband Adoption In Unserved And Underserved Areas, Ankit Agarwal

Masters Theses

"In the last two decades, demand for broadband internet has far outpaced its availability. The Federal Communications Commission’s (FCC) 2020 Broadband Deployment report suggests that at least 22 million Americans living in rural areas lack access to broadband internet. With the COVID-19 pandemic affecting normal life, there is an overwhelming need to enable unserved and underserved communities to adapt to the “new normal”. To address this challenge, federal and state agencies are funding internet service providers (ISPs) to deploy infrastructure in rural communities. However, policymakers and ISPs need open-source tools to predict take-rates of broadband service and formulate effective strategies …

The Role Of Psychological Reactance In Smart Home Energy Management Systems, Matthew Thomas Heatherly

Masters Theses

“With an ever-growing demand for energy, our increasing consumption is producing more greenhouse gases and other pollutants, impacting climate change. One approach to reducing residential energy consumption is through the use of smart energy management systems. However, automation from smart technology inherently removes a certain amount of control from the user. If loss of control is perceived as a loss of freedom, this may lead users to experience psychological reactance when using these products. A set of experiments was conducted to assess how three features of a message notification from smart home energy management systems may induce reactance in users. …

The Effects Of Rigid Polyurethane Foam As A Confinement Material On Breaching Charge Detonations, Nathan Franz Paerschke-O'Brien

Masters Theses

"The effects of a rigid polyurethane foam used as a confinement material on four types of breaching explosives were tested, focusing on the changes in shockwave peak pressures, detonation load compression forces, and brisance cratering abilities. The Plate Dent testing procedure was modified to incorporate a load cell force sensor, and two air overpressure sensors were included adjacent to the blast to quantify each test result. The testing variables focused on the polyurethane foam cure times and thickness volumes around the breaching explosives to determine the breaching charges' optimal energy output capabilities when confined by the foam material. The rigid …

Optimal Mammography Schedule Estimates Under Varying Disease Burden, Infrastructure Availability, And Other Cause Mortality: A Comparative Analyses Of Six Low- And Middle- Income Countries, Shifali Shifali

Masters Theses

Low-and-middle-income countries (LMICs) have a higher mortality-to-incidence ratio for breast cancer compared to high-income countries (HICs) because of late-stage diagnosis. Mammography screening is recommended for early diagnosis, however, current screening guidelines are only generalized by economic disparities, and are based on extrapolation of data from randomized controlled trials in HICs, which have different disease burdens and all-cause mortality compared to LMICs. Moreover, the infrastructure capacity in LMICs is far below that needed for adopting current screening guidelines. This study analyzes the impact of disease burden, infrastructure availability, and other cause mortality on optimal mammography screening schedules for LMICs. Further, these …

Modeling Of Electrical Grid Systems To Evaluate Sustainable Electricity Generation In Pakistan, Muhammad Mustafa Amjad

Masters Theses

Pakistan has always had a history of severe energy shortfalls, which rose up to an alarming 33% in 2013. This situation was countered by investments in the energy sector through the China Pakistan Economic Corridor (CPEC), which were unfortunately largely based on brown fuels. Although beneficial in the short term, these investments do not bode well for the climate scenario of Pakistan, with various parts of the country already having experienced temperatures rise of 1-3°C. To ensure that the current situation doesn’t exacerbate and is tackled in a timely manner, this research aims to examine how the untapped potential of …

The Promise Of Vr Headsets: Validation Of A Virtual Reality Headset-Based Driving Simulator For Measuring Drivers’ Hazard Anticipation Performance, Ganesh Pai Mangalore

Masters Theses

The objective of the current study is to evaluate the use of virtual reality (VR) headsets to measure driving performance. This is desirable because they are several orders of magnitude less expensive and, if validated, could greatly extend the powers of simulation. Out of several possible measures of performance that could be considered for evaluating VR headsets, the current study specifically examines drivers’ latent hazard anticipation behavior both because it has been linked to crashes and because it has been shown to be significantly poorer in young drivers compared to their experienced counterparts in traditional driving simulators and in open …

Topology Network Optimization Of Facility Planning And Design Problems, Ravi Ratan Raj Monga

Masters Theses

The research attempts to provide a graphical theory-based approach to solve the facility layout problem. Which has generally been approached using Quadratic Assignment Problem (QAP) in the past, an algebraic method. It is a very complex problem and is part of the NP-Hard optimization class, because of the nonlinear quadratic objective function and (0,1) binary variables. The research is divided into three phases which together provide an optimal facility layout, block plan solution consisting of MHS (material handling solution) projected onto the block plan. In phase one, we solve for the position of departments in a facility based on flow …

Advanced Virtual Reality Headset Based Training To Improve Young Drivers’ Latent Hazard Anticipation Ability, Ravi Agrawal

Masters Theses

Driving safety among young novice driver is one of the largest concern in the transportation domain. Many Paper-based or PC- based training program have been developed over the years to train the young novice driver to improve their driving skills (Hazard Anticipation). This training programs does help young novice driver to improve their situational awareness and so the hazard anticipation skills. But, there is one common problem with most of the currently available training programs. They are not very immersive, because such training program mostly provide plain view of the training scenario’s along with some description about the scenario and …

A Computational Simulation Model For Predicting Infectious Disease Spread Using The Evolving Contact Network Algorithm, Buyannemekh Munkhbat

Masters Theses

Commonly used simulation models for predicting outbreaks of re-emerging infectious diseases (EIDs) take an individual-level or a population-level approach to modeling contact dynamics. These approaches are a trade-off between the ability to incorporate individual-level dynamics and computational efficiency. Agent-based network models (ABNM) use an individual-level approach by simulating the entire population and its contact structure, which increases the ability of adding detailed individual-level characteristics. However, as this method is computationally expensive, ABNMs use scaled-down versions of the full population, which are unsuitable for low prevalence diseases as the number of infected cases would become negligible during scaling-down. Compartmental models use …

Forecasting The Cost Of Electricity Generated By Offshore Wind Turbines, Timothy Costa

Masters Theses

To impede the progress of climate change, many policy makers are considering avenues to decarbonize electricity production. In addition to decarbonization, policy makers must consider how the cost of electricity will impact various stakeholders, balancing cost and social benefits. Offshore wind farms have the potential to produce affordable, carbon-free electricity, but they are a relatively new technology. The relative juvenescence of offshore wind lends itself to an uncertain future, regarding production costs. In this thesis, we seek to understand cost drivers behind offshore wind electricity by analyzing historic trends in offshore wind levelized cost of electricity (LCOE) through learning curves, …

The Evacuation Problem In Multi-Story Buildings, Quang Hong Cung

Masters Theses

The pressure from high population density leads to the creation of high-rise structures within urban areas. Consequently, the design of facilities which confront the challenges of emergency evacuation from high-rise buildings become a complex concern. This paper proposes an embedded program which combines a deterministic (GMAFLAD) and stochastic model (M/G/C/C State Dependent Queueing model) into one program, GMAF_MGCC, to solve an evacuation problem. An evacuation problem belongs to Quadratic Assignment Problem (QAP) class which will be formulated as a Quadratic Set Packing model (QSP) including the random flow out of the building and the random pairwise traffic flow among activities. …

Routing Algorithm For The Ground Team In Transmission Line Inspection Using Unmanned Aerial Vehicle, Yu Li

Masters Theses

"With the rapid development of robotics technology, robots are increasingly used to conduct various tasks by utility companies. An unmanned aerial vehicle (UAV) is an efficient robot that can be used to inspect high-voltage transmission lines. UAVs need to stay within a data transmission range from the ground station and periodically land to replace the battery in order to ensure that the power system can support its operation. A routing algorithm must be used in order to guide the motion and deployment of the ground station while using UAV in transmission line inspection. Most existing routing algorithms are dedicated to …

Evaluation And Validation Of Distraction Detection Algorithms On Multiple Data Sources, Shashank Mehrotra

Masters Theses

This study aims to evaluate algorithms designed to detect distracted driving. This includes the comparison of how efficiently they detect the state of distraction and likelihood of a crash. Four algorithms that utilize measures of cumulative glance, past glance behavior, and glance eccentricity were used to understand the distracted state of the driver and were validated on two separate data sources (i.e., simulator and naturalistic data). Additionally, an independent method for distraction detection was designed using data mining methods. This approach utilized measures like steering degree, lane offset, lateral and longitudinal velocity, and acceleration. The results showed a higher likelihood …

The Application Of Usability Engineering Methods To Evaluate And Improve A Clinical Decision Support System, Kristine Desotto

Masters Theses

Delays in the process of diagnosing and treating cancer are common and lead to confusion and undesirable outcomes. Care coordinators are often embedded within the system of care to manage follow-up care. Electronic and real-time reminder systems can be used to support the care coordinator’s work, but electronic health record (EHR) usability is known to be poor. This study, completed in collaboration with the Department of Veterans Affairs (VA) Connecticut Healthcare System, evaluated the Cancer Coordination and Tracking System (CCTS), an EHR-linked, web-based tool for cancer care management.

A set of expert-driven and user-driven usability engineering methods was applied to …