Engineering Commons^™

A Case Study In Cmos Design Scaling For Analog Applications: The Ringamp Ldo, Steven Corum

Masters Theses

As CMOS process nodes scale to smaller feature sizes, process optimizations are made to achieve improvements in digital circuit performance, such as increasing speed and memory, while decreasing power consumption. Unfortunately for analog design, these optimizations usually come at the expense of poorer transistor performance, such as reduced small signal output resistance and increased channel length modulation. The ring amplifier has been proposed as a digital solution to the analog scaling problem, by configuring digital inverters to function as analog amplifiers through deadzone biasing. As digital inverters naturally scale, the ring amplifier is a promising area of exploration for analog …

Approximate And Sample Entropy Of Center Of Pressure In Unperturbed Tandem Standing: Contribution Of Embedding Dimension And Tolerance, Jayla Mashae Wesley

Masters Theses

Approximate entropy (ApEn) and sample entropy (SampEn) are statistical methods designed to quantify the regularity or predictability of a time series. Although ApEn has been a prominent choice for use, it is currently unclear as to which method and parameter selection combination is optimal for its application in biomechanics. The goal of this thesis was to examine the difference between ApEn and SampEn related to center of pressure (COP) data during standing balance tasks, while also refining tolerance r, to determine entropy optimization. Six participants completed five 30-second, feet together and tandem standing, trials under eyes-open and eyes-closed conditions. Ground …

A Low Power, Rad-Hard, Ecl Standard Cell Library, Zakaraya A. Hamdan

Masters Theses

Space exploration for life both inside and outside of our solar system demand the design and fabrication of robust, reliable electronics that can take measurements, process data, and sustain necessary operations. However, the presence of high radiation and the cold temperature of space poses a challenge to most designers. This thesis presents the design of a radiation-hardened, cold capable emitter coupled logic standard cell library with the intention of being used for space applications. The cells are designed and fabricated in a 90nm silicon germanium BiCMOS process. First, a review of emitter coupled logic is presented. Then, the design methodology …

Load Modeling And Evaluation Of Leds For Hardware Test Bed Application, Jillian M. Ruff

Masters Theses

The lighting industry was revolutionized with the emergence of LED lighting. Over the last 15 years, LED lighting device sales and utilization have grown immensely. The growth and popularity of LEDs is due to improved operation of the device when compared to previous lighting technologies. Efficient performance of the device is critical due to the growth of global energy consumption.

As nonrenewable generation fuel is finite, utilities have begun the transition to renewable energy generation. Generation and distribution systems become inherently complex to comprehend and maintain with incorporation of emerging supply and load technologies. With the unprecedented growth of LED …

A Bulk Driven Transimpedance Cmos Amplifier For Sipm Based Detection, Shahram Hatefi Hesari

Masters Theses

The contribution of this work lies in the development of a bulk driven operational
transconducctance amplifier which can be integrated with other analog circuits and
photodetectors in the same chip for compactness, miniaturization and reducing the
power. Silicon photomultipliers, also known as SiPMs, when coupled with scintillator materials are used in many imaging applications including nuclear detection. This thesis discuss the design of a bulk-driven transimpedance amplifier suitable for detectors where the front end is a SiPM. The amplifier was design and fabricated in a standard standard CMOS process and is suitable for integration with CMOS based SiPMs and commercially …

Development Of Arduino-Based Portable Systems For Electroanalytical Detection, Jiamei Huang

Masters Theses

This work presents the development of a multi-mode electroanalytical detection system based on Arduino microcontroller board. First, a multichannel impedance readout system is designed for alternating current electrokinetics (ACEK) based capacitive sensing. ACEK phenomena on 100μm interdigitated electrodes are observed via fluorescent particles as well as bioparticles, which illustrate the mechanisms of ACEK target enrichment for the capacitive sensing method. I2C multiplexer is applied to allow multiple impedance converters to work together providing continuous AC signals for ACEK capacitive sensing. Second, an electronic nose composed of three modules including a gas sensor array, a circuit for signal acquisition integrated with …

Design And Evaluation Of A Unique Weighted-Sum-Based Anger Camera, Matthew W. Seals

Masters Theses

Anger camera imaging technology has become widely popular for neutron diffraction imaging due to recent shortages in Helium-3 (He-3). Research into neutron diffraction optimized Anger camera by the Oak Ridge National Laboratory (ORNL) detectors group has provided an alternative to He-3 Tube-based detectors with a high-resolution Anger camera. However, the cost of these high-resolution Anger camera technology can make it less attractive than He-3 tubes when a large Field of View (FOV) is desired. Currently, there is a need for a lower-cost alternative to this high-resolution anger camera. Further applications for Anger camera have become of interest with the advent …

Planar Ultra-Wideband Modular Antenna (Puma) Arrays For High-Volume Manufacturing On Organic Laminates And Bga Interfaces, James R. Lacroix

Masters Theses

This work proposes wideband and broadband Planar Ultra-wideband Modular Antenna (PUMA) arrays designed to improve cost and reliability for high production volume commercial and military applications. The designs feature simplified PCB stack-ups with high dielectric constant (Dk) dimensionally stable materials to improve the manufacturing cost and yield. Additionally, the packages use ball grid array (BGA) interconnects, commonly used in digital electronics, for simple solder reflow integration with radio frequency (RF) electronics. While high Dk materials present practical manufacturing benefits, theoretical background will show how and why PUMA arrays lose frequency bandwidth and scan volume with high Dk materials. Further, a …

Partial Discharge Testing And Detection Under Pwm Voltage, John Meadors

Masters Theses

Partial Discharge detection and measurement is an important part of electric insulation design. However, in PWM (pulse width modulation) voltage source converter environments, the noise resulting from switching voltage (rise and fall times of tens of nanoseconds) makes detection and extraction of partial discharge difficult. Unique methods of partial discharge detection are needed to address and decouple the noise from partial discharge measurements. PWM voltage can feature high switching speeds and high dv/dt during voltage switching. These PWM voltage behaviors are not found in traditional utility high voltage applications, and the effects that this type of voltage has on insulation …

Development Of An Encrypted Wireless System For Body Sensor Network Applications, Kendra Anderson

Masters Theses

Wireless body area networks (WBAN), also called wireless body sensor networks (WBSN), consist of a collection of wireless sensor nodes used to monitor and assess various human physiological conditions, which can then be used by healthcare professionals to help them make important healthcare decisions. They can be used to prevent disease, help diagnosis a disease, or manage the symptoms of a disease. An extremely important aspect of WBAN is security to protect a patient's healthcare information, as a hacker could potentially cause fatal harm. Current security measures are implemented in software at the MAC layer and higher, not in the …

Development Of A Point-Of-Use Testing Platform For Detecting Bacteria Infection In Raw Milk, Xin Xia

Masters Theses

The detection and quantification of bacteria are essential to environment and food quality monitoring. Escherichia coli (E. coli) is a common pathogen, also a causative agent of mastitis. Traditional methods usually require samples to be tested in a laboratory. However, sending samples to remote lab increases the cost of time and money spent on delivery. Sometimes, samples can degrade during this long progress and cause inaccuracy. A low cost and reusable sensor is designed to perform on-site quantification. The sensor composed of two layers of asymmetrical mesh electrodes, which is used in coordination magnetic microparticles functionalized with bacterium-specific antibody. Immunological …

Development Of A Converter-Based Testing Platform And Battery Energy Storage System (Bess) Emulator For Microgrid Controller Function Evaluation, Dingrui Li

Masters Theses

The microgrid has attracted increasing research attention in the last two decades. Due to the development of renewable energy resources and power electronics technologies, the future microgrid will trend to be smarter and more complicated. The microgrid controller performs a critical role in the microgrid operation, which will also become more and more sophisticated to support the future microgrid. Before final field deployment and test, the evaluation and testing of the controller is an indispensable step in the controller development, which requires a proper testing platform.

However, existing simulation-based platforms have issues with potential numerical oscillation and may require huge …

Design Of Power Receiving Units For 6.78mhz Wireless Power Transfer Systems, Hoang Phuc Tran Pham

Masters Theses

In the last decade, the wireless power transfer (WPT) technology has been a popular topic in power electronics research and increasingly adopted by consumers. The AirFuel WPT standard utilizes resonant coils to transfer energy at 6.78 MHz, introducing many benefits such as longer charging distance, multi-device charging, and high tolerance of the coil misalignment. However, variations in coil coupling due to the change in receiving coil positions alter the equivalent load reactance, degrading efficiency.

In recent studies, active full-bridge rectifiers are employed on WPT receivers because of their superior efficiency, controllability, and ability to compensate for detuned WPT networks. In …

Flexible Capacitive Pressure Sensors And Triboelectric Energy Harvesters Using Laser-Assisted Patterning Process For Flexible Hybrid Electronic Applications, Valliammai Palaniappan

Masters Theses

This work focuses on the design, fabrication and characterization of novel flexible capacitive pressure sensors and triboelectric energy harvesters using laser-assisted patterning process for flexible hybrid electronic applications. Initially, the capacitive pressure sensor was developed by fabricating a set of polydimethylsiloxanes (PDMS) dielectric films with pyramid shaped micro-structures using a laser-assisted patterning process. The pressure sensor consists of two electrodes (top and bottom) that were fabricated by depositing silver (Ag) on flexible polyethylene terephthalate (PET) using additive screen-printing process. Finally, the pressure sensor was assembled by attaching the top and bottom Ag electrodes to the smooth side of pyramid shaped …

Optimized System For On-Route Charging Of Battery Electric Buses And High-Fidelity Modelling And Simulation Of In-Motion Wireless Power Transfer, Yogesh Bappasaheb Jagdale

Masters Theses

Electrifying cars, buses and trucks is an attractive means to reduce energy use and emissions, because it involves minimal restructuring of the transportation network. Transit buses drive fixed routes, minimizing driver range anxiety by properly sizing energy storage system but the major challenge to fully electrifying transit buses, is the amount of energy they consume in a day of driving. To enable a full day of operation, batteries need to be large, which is expensive and heavy. This work utilizes real-world transit bus data fed to a battery electric drive-train model to co-optimize charger locations, charger power levels, and vehicle …

A Comparative Study On The Stability And Degradation Of Perovskite Solar Cells, Jyotiska Chakraborty

Masters Theses

This study aims to investigate the environmental factors that affect the performance and longterm stability of the perovskite solar cells (PSCs). PSCs are based on organo-metallic halides (perovskites) that act as a light-sensitive compound that produces excitons when placed under the light. However, PSCs have a limited operating lifetime due to the degradation of the perovskite layer. There are many factors like moisture, UV light, and temperature that lead to the degradation of the perovskite layer. From the literature review, it was found that the PSCs do not degrade with the presence of oxygen in a dry and dark environment. …

The Umass Experimental X-Band Radar (Umaxx): An Upgrade Of The Casa Ma-1 To Support Cross-Polarization Measurements, Jezabel Vilardell Sanchez

Masters Theses

Ground-based radars are instruments commonly used to surveil the precipitation climate of the surrounding areas. Weather events are characterized by collecting backscatter data and analyzing computed products such as the Reflectivity Factor, the Doppler Velocity, the Spectrum Width, the Differential Reflectivity, the Co-polar Correlation Coefficient and the Differential Propagation Phase. The ability of the radar to transmit different polarization waves, such as horizontal and vertical polarization, allow for further analysis of the weather given the capability to perform co-polar and cross-polar measurements. The Linear Depolarization Ratio is another computed product based on the difference in power between the co-polarized and …

Energy Efficiency Of Computation In All-Spin Logic: Projections And Fundamental Limits, Zongya Chen

Masters Theses

Built with nanomagnets, a spintronic device called the all-spin logic (ASL) device carries information with only spin currents, resulting in a low power supply--10 mV. This voltage is 100 times smaller than the conventional CMOS devices (usually 0.8~1V). The potential for improved energy efficiency made possible by the low operating voltage of ASL makes it one of the most promising devices among its post-CMOS competitors.

The basic working principles of ASL device are introduced in this thesis and two complementary approaches to studying energy efficiency of computation are applied to a common set of ASL circuits: (1) a circuit simulation …

Distributed Element Designs For A Wireless System, Nicholas Anthony Dipisa

Masters Theses

A prototype binary frequency shift keying (BFSK) RF link operating in the 2.4 GHz ISM band was identified as a need for a potential undergraduate engineering laboratory activity. This system would be used to showcase various RF circuit engineering principles and techniques such as controlled trace impedances, frequency mixing, voltage-controlled oscillators, distributed element filters, and power splitters. This investigation focused on designing a prototype system that put a priority on ease of measurement and circuit tuning to help foster a more hands on approach. Each major circuit element was broken into separate PCBs to increase the modularity of the design …

Vhf Transmitter Development For Wildlife Tracking, Bryan Westra

Masters Theses

Wildlife biologists often use collars with VHF transmitters to gather wildlife data. The purpose of this project is to determine the best approach to designing a wildlife tracking VHF transmitter on a Printed Circuit Board (PCB). A variety of frequency generation methods were considered for the transmitter, including transistor-based crystal oscillators and chip based solutions from the chip manufacturers Analog Devices and Silicon Labs. Prototypes of the feasible options were built and evaluated for cost, power consumption, efficiency, size, frequency range, signal bandwidth, and frequency stability. It was found that the Silicon Labs Si4010 chip was the best solution based …

On-Chip Communication And Security In Fpgas, Shivukumar Basanagouda Patil

Masters Theses

Innovations in Field Programmable Gate Array (FPGA) manufacturing processes and architectural design have led to the development of extremely large FPGAs. There has also been a widespread adaptation of these large FPGAs in cloud infrastructures and data centers to accelerate search and machine learning applications. Two important topics related to FPGAs are addressed in this work: on-chip communication and security. On-chip communication is quickly becoming a bottleneck in to- day’s large multi-million gate FPGAs. Hard Networks-on-Chip (NoC), made of fixed silicon, have been shown to provide low power, high speed, flexible on-chip communication. An iterative algorithm for routing pre-scheduled time-division-multiplexed …

Mgsnn2: A New Eco-Friendly Wide Band Gap Semiconductor, Krystal R. York

Masters Theses

Materials having a wide band gap (above 2 eV) can provide new alternatives for existing light-emitting diodes (LEDs) and other opto-electronic devices. Currently, many such devices are comprised of low-earth-abundant elements, such as gallium and indium, which are harmful to the environment to extract and difficult to recycle. Alternatively, MgSnN2 is an unexplored material comprised of earth abundant elements which benefit from a mature recycling infrastructure. This material has a predicted band gap of 3.43 eV, indicating that it could be a viable substitute for GaN (band gap of 3.4 eV), which is commonly used in LEDs and other device …

Fusion Of Audio And Visual Information For Implementing Improved Speech Recognition System, Vikrant Satish Acharya

Masters Theses

Speech recognition is a very useful technology because of its potential to develop applications, which are suitable for various needs of users. This research is an attempt to enhance the performance of a speech recognition system by combining the visual features (lip movement) with audio features. The results were calculated using utterances of numerals collected from participants inclusive of both male and female genders. Discrete Cosine Transform (DCT) coefficients were used for computing visual features and Mel Frequency Cepstral Coefficients (MFCC) were used for computing audio features. The classification was then carried out using Support Vector Machine (SVM). The results …

Analog Computing Using 1t1r Crossbar Arrays, Yunning Li

Masters Theses

Memristor is a novel passive electronic device and a promising candidate for new generation non-volatile memory and analog computing. Analog computing based on memristors has been explored in this study. Due to the lack of commercial electrical testing instruments for those emerging devices and crossbar arrays, we have designed and built testing circuits to implement analog and parallel computing operations. With the setup developed in this study, we have successfully demonstrated image processing functions utilizing large memristor crossbar arrays. We further designed and experimentally demonstrated the first memristor based field programmable analog array (FPAA), which was successfully configured for audio …

An Analog Cmos Particle Filter, Trevor Watson

Masters Theses

Particle filters are used in a variety of image processing and machine learning applications. Their main use in these applications is to gather information about a system of objects, by using partial or noisy observations collected from sensors. These observations are used to associate points of interest in the observations with objects and maintain this association through a series of observations.

In this paper I will investigate the performance of a particle filter implemented in 130nm analog CMOS hardware. The design goal of the particle filter is low-microwatt power consumption. Using analog hardware, rather than digital ASICs or CPUs I …

High-Current Integrated Battery Chargers For Mobile Applications, Gabriel Alejo Gabian

Masters Theses

Battery charging circuits for mobile applications, such as smart phones and tablets, require both small area and low losses. In addition, to reduce the charging time, high current is needed through the converter. In this work, exploration of the Buck, the 3-Level Buck and the Hybrid Buck converter is performed over the input voltage, the total FET area and the load current. An analytical loss model for each topology is constructed and constrated by experimental results. In addition, packaging and bond wire impact on on-chip losses is analyzed by 3D modeling. Finally, a comparison between the topologies is presented determining …

Design Of An Integrated Silicon Carbide Nonlinear-Carrier Pwm Controller For Boost Converter Applications, Richard Kyle Harris

Masters Theses

Power electronics consisting of a switch mode power supply with feedback control have a great number of applications, including many that require extreme environment capability, such as the aerospace and automotive industries.

Silicon carbide (SiC) is a common material in which power devices are created for use in switch mode power supplies, such as boost converters, giving those power supplies extremely high temperature capabilities. To truly realize the temperature capabilities of SiC in power supplies, an integrated SiC converter has been designed that is also high-temperature capable.

Herein, the properties of SiC integrate circuit (IC) processes are discussed and nonlinear-carrier …

Battery Energy Storage Emulation For Power System Applications, Jessica Danielle Boles

Masters Theses

The concept of energy storage for power systems has received increasingly more attention in recent decades, and the growing penetration of renewable energy sources has only escalated demand for it. Energy storage systems are excellent for balancing generation and load, for suppressing power fluctuations, and for providing other ancillary services to the grid. The Hardware Testbed (HTB) is a novel converter-based grid emulator created for studying the needs associated with high renewable penetration, but the system currently lacks a battery storage emulator. Thus, this work documents the development of a battery energy storage system (BESS) emulator for the HTB.

The …

A Practical Realization Of A Return Map Immune Lorenz Based Chaotic Stream Cipher In Circuitry, Daniel Robert Brown

Masters Theses

Some chaotic systems are advantageously capable of self-synchronizing with a like system through a single shared state. Using a plain text binary message, a single system parameter can be modulated to mask this message and transmit it securely through the single shared state. The most simple implementations of this encryption technique are, however, vulnerable to the return map attack. Using a time-scaling factor to further obfuscate the modulation process, a return map attack immunity is gained. We report on the progress towards a realization of this process in real-time analog circuitry using off-the-shelf components.

A Sub-Threshold Low-Power Integrated Bandpass Filter For Highly-Integrated Spectrum Analyzers, Benjamin David Roehrs

Masters Theses

Low-power analog filter banks provide frequency analysis with minimal space requirements, making them viable solutions for integrated remote audio- and vibration-sensing applications. In order to achieve a balance between the length of deployable service and system performance, a critical requirement of such remote sensor networks is low-power consumption, due to the constraints imposed by on-board battery cells.

In this work, the design and implementation of a sub-threshold complementary metal-oxide semiconductor (CMOS) integrated low-power tunable analog filter channel for Oak Ridge National Laboratory is presented. Project specifications required a tunable, high-order, monolithic bandpass filter channel with small chip area and low …