Engineering Commons^™

The Influence Of Aviation Technology On Human Complacency, Aurora Burton

Honors Theses

The thesis covers automation complacency in the aviation industry. The purpose being to provide a foundation of complacency-related accidents to support or dismiss the Federal Aviation Administration’s claim to automation-induced inattention. Complacency factors are outlined in a multitude of fields, creating a background for aviation discussion. To outline the parameters of literature review, behaviors associated with complacency are addressed. Next, a compilation of accident reports is examined and categorized. Specific, impactful accidents relating to complacency are detailed and explained. Summarily, three solutions to human-driven complacency are proposed, evaluated, and analyzed. Including the following: proficiency advancement, technology improvement, and change in …

Av Operation And Energy Efficiency Improved Through The Evaluation And Demonstration Of Av Sensor Technology, Nicholas Brown

Dissertations

The majority of states have passed legislation or have signed an executive order enacting safe testing, development, and deployment of level 4 and level 5 autonomous vehicles (AVs) in accordance with SAE standard J3016, which has led to an increase in the frequency of AV testing. The major driving force behind the push for AVs on public roads appears to be the increases the number of AVs on the road to decrease the chances of fatalities from distracted drivers. There are reports of disengagement from companies, which are required to report them to operate within California. The continuance of disengagements …

Synthesis Of Glucomannan-Xylan Composite Biofilms: Characterization And Applications For Food Packaging, Kholoud Al-Ajlouni

Dissertations

Scientists are most concerned about the need for green alternatives for efficient food packaging polymers to replace petroleum-based packaging products. The waste of corn cobs and the roots of the konjac plant contain hemicellulose, xylan and glucomannan respectively, and can be used to produce biofilms for food packaging.

The aim of these studies is to formulate biofilms from glucomannan-xylan blends that compete with petroleum-based plastic wrap. The biofilms must be strong, smooth, transparent, have a water vapor barrier, have the required mechanical properties and be cheap. Biofilms from glucomannan were stiff, lacked mechanical properties, and absorbed moisture. Therefore, it reacts …

Advancing Winter Weather Adas: Tire Track Identification And Road Snow Coverage Estimation Using Deep Learning And Sensor Integration, Parth Kadav

Masters Theses

No abstract provided.

Nonlinear Finite Element Model For Functionally Graded Porous Circular/Annular Micro-Plates Under Thermal And Mechanical Load, Enrique Nava Munoz

Masters Theses

A nonlinear finite element model for micro circular/annular plates under thermal and mechanical loading is developed using a third order shear deformation theory. In the kinematic assumptions, the change of plate thickness is allowed and no transverse shear strains are considered on the top and bottom surfaces. A power-law distribution is utilized to account for variations of two constituents through the thickness of the plate. Three different types of porosity distributions are considered. The strain gradient effect in micro scale structures is considered using the modified couple stress theory. The dynamic version of the principle of virtual displacements is used …

A Multi-Objective Stochastic Programming Model For Resilient And Sustainable Supply Chains Under Uncertainty, Mohammad H. Majdfaghihi

Dissertations

Supply chain resilience (SCRES) and sustainable supply chain management (SSCM) have garnered significant attention in the field of Supply Chain Management (SCM) science. This heightened interest is largely attributable to the increasing frequency and severity of uncertainty and disruptions in global supply chains. Resilience is a beneficial approach to managing uncertainties and preparing for and mitigating the adverse consequences of Supply Chain (SC) disruptions. Sustainability is a key concept in SCM, driven by governmental regulations and heightened stakeholder and customer concerns for environmental and societal well-being. Studies on SCRES have traditionally focused on preparing for and reacting to disruptions and …

Towards Reliable Hepatocytic Anatomy Segmentation In Laparoscopic Cholecystectomy Using U-Net With Auto-Encoder, Koloud Najem Alkhamaiseh

Dissertations

Despite the advantages of minimally invasive surgeries that depend heavily on vision, the indirect access and lack of the 3D field of view of the area of interest introduce some complications in the desired procedures. Fortunately, the recorded videos from these procedures offer the opportunity for intra-operative and post-operative analyses, to improve future performance and safety.

Deep learning models for surgical video analysis could therefore support visual tasks such as identifying the critical view of safety (CVS) in laparoscopic cholecystectomy (LC), potentially contributing to the reduction of the current rates of bile duct injuries in LC. Most bile duct injuries …

Wideband Parameter Estimation Of Overhead Transmission Lines From Terminal Measurements, Fahad J. Alqahtani

Dissertations

The accurate and efficient determination of electrical parameters of transmission lines is essential when performing computer-aided analyses of power systems, including power-flow, state estimation, short-circuit, transient stability, power quality, and electromagnetic transients.

In this dissertation, a novel technique for wideband parameter estimation of frequency-dependent single-phase, three-phase transposed, and three-phase untransposed overhead lines, is proposed. The proposed technique utilizes terminal measurements of transient voltages and currents and is based on an analytical approach to solve the frequency domain 2-port nodal model of the line for the series impedance and shunt conductance per unit length as a function of the frequency. The …

An Engineering Approach For Evaluating The Lifetime Experience Of Sex Trafficking Victimization, Kimberly Starr Nagulpelli

Dissertations

This research is an original approach that applies industrial engineering and operations research tools to the sociological problem of sex trafficking victimization. Such an approach enables quantitative evaluation of the impacts on an individual’s lifetime by anti-trafficking efforts and public policies.

A fully interconnected, lifetime model for the experience of sex trafficking victimization is defined as the result of a comprehensive review of literature. Beginning with victimization risk, the defined model is an anticipatory tool to understand the incidences and consequences to individuals during their lifetime. This research develops the model further into a Discrete-Time Markov Chain (DTMC) with definitions …

Improving Autonomous Vehicles Operational Performance Using Resilience Engineering, Johan Fanas Rojas

Dissertations

Autonomous vehicles are expected to revolutionize the transportation industry by providing a safer and more efficient means of transportation. However, as autonomous vehicles are deployed on public roads, they are exposed to significant risks, both in terms of safety and system performance. Recent studies have highlighted a range of errors and accidents associated with autonomous vehicles, underscoring the need for a systematic approach to improve their operational resilience. Resilience engineering, a discipline focused on designing and analyzing complex systems to better cope with unexpected events and disruptions, offers a promising framework for addressing these challenges. Despite the potential benefits of …

Investigating Disparities And Safety Equity In Pedestrian Nighttime Crashes In Michigan, Sia Isaria Mwende

Masters Theses

For the past eleven years (2011 - 2021) in Michigan, 76 percent of all fatal pedestrian crashes occurred at night. Over the same period, about 36 percent of pedestrian nighttime crashes were fatal or incapacitating (KA), while only 25 percent of daytime pedestrian crashes were fatal or incapacitating (KA). Previous studies suggest that, overall, poor neighborhoods and racial minorities are associated with more pedestrian crashes. With more fatal and incapacitating pedestrian crashes occurring at night, it is imperative to examine how these crashes are distributed by economic status and racial makeup. Therefore, this study aims to investigate the racial and …

Enabling Energy Efficiency In Connected And Automated Vehicles Through Predictive Control Techniques, Farhang Motallebiaraghi

Dissertations

The transportation sector is a significant contributor to global energy consumption and emissions, necessitating the development of sustainable transportation systems. In this regard, connected and automated vehicles (CAVs) have emerged as a potential solution to transform the transportation industry. By harnessing advanced mapping and location technologies, Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) communication, CAVs offer the promise of improving efficiency, reducing traffic congestion, and enhancing safety and comfort. However, the adoption of CAVs also brings about various challenges, including energy efficiency concerns that need to be addressed to fully realize their potential benefits. This dissertation investigates energy-efficient control techniques for transportation …

Aviation Mentorship Program, Joseph Zynda

Honors Theses

The Aviation COR Mentorship program is a test for efficacy of a mentorship program for Western Michigan University’s College of Aviation. This paper describes what the mentorship program is and the values it is founded on. The description will break down each Core Value (these are renamed to Core Principles in the “Facilitating Improvements” section). The paper then dives into the criteria for being a mentor or mentee and the schedule of the test program. The goals are then outlined for this initial program in a chart. There are five goals for the program to assist students with the transition …

Mental Health In Aviation: A Study Of Aviation Students On Their Perceptions Of The Federal Aviation Administration’S Rules Governing Mental Health, Laila Stein

Honors Theses

This study aims to understand collegiate aviation students, faculty, staff, and flight instructors’ perceptions of the Federal Aviation Administration’s (FAA) regulations governing mental health assistance. It also aims to examine the impact of the perceptions held by students, faculty, staff, and flight instructors regarding their desire to seek mental health assistance. A study at Western Michigan University’s (WMU) College of Aviation (COA) was developed to test the hypothesis that students, faculty, staff, and flight instructors had a restrictive perception of the FAA rules regarding seeking mental health assistance, and that students, faculty, staff, and flight instructors had lower desire to …

Analysis And Mitigation Of Pneumatic Regulator Resonance, Luke Fouch

Honors Theses

Internal resonance in pneumatic regulators can result in heavy leakage, which can lead to less efficient processes. To address this issue, two simulations were developed to simulate pneumatic regulation systems. The first simulation involved deriving a mathematical model of the equations of motion for a regulator and applying it using MATLAB. The second simulation involved developing a Simulink model that incorporated physical regulator properties. To verify the accuracy of both models, physical testing data was used. After verification, the models were modified in various ways to determine the main drivers of resonance in pneumatic systems. Additionally, Finite Element Analysis was …

Conversion Of Biomass To Bio-Fuel Using Fast Pyrolysis With Companion Coal Gasification, Nicholas Hayes

Honors Theses

The objective for this design is to determine the economic benefits of using soybeans to combine biomass pyrolysis with coal pyrolysis processes to reduce the complexity and cost of producing bio-oils. Biomass is produced in multiple industries and is converted to a usable fuel substitute for petroleum. There will be many methods to analyse the pros and cons which will be used for comparison of biomass to bio-oils reactors system which in this case would be soybeans vs coal gasification.

After thorough research, the team selected a fluidized bed reactor as the main equipment for the fast pyrolysis. The reactor …

Api Drying And Packaging Technology Upgrades, Destiny Washington

Honors Theses

Certain classes of active pharmaceutical ingredients (APIs) require higher levels of containment during handling. This project explores upgrades and new technology to improve currently used systems. The upgrades will include containment during drying and packaging while maintaining required ergonomic, industrial health, and GMP requirements. Design of this system and a full economic analysis have been performed for these upgrades.

This project details the profits and costs that are associated with the conversion of the API drying process from a batch process to a semi continuous process using an agitated thin film evaporator. The implementation of the new equipment is expected …

Thermal Control For A Miniaturized Fabry-Perot Interferometer In A Cubesat, Callie Pilkington

Honors Theses

The evaluation of neutral winds is critical in understanding the ever-changing weather and climate of the thermosphere, which can develop into a hostile environment for satellites. To measure these neutral winds, Michigan Aerospace Corporation is developing a 6U CubeSat that utilizes a miniaturized Fabry-Perot interferometer. For ideal operation, the Fabry-Perot interferometer requires a closely maintained thermal environment. These requirements are crucial in obtaining accurate measurements and for sustaining instrument and mission life due to the vast temperature range experienced in the thermosphere. With the solutions outlined in this proposal, the goal is to provide Michigan Aerospace with an optimized configuration …

Air Pre-Heat System Optimization For Flash Dryers, Sophia Louden

Honors Theses

Primient, a leading producer of food and industrial ingredients made from plant-based, renewable sources is the industrial sponsor for this project. The company is currently using Plate & Frame Heat exchangers to heat up a 40% by-weight glycol and water solution that is then used to preheat the incoming ambient air. Glycol is being added to reduce the risks of freezing in the system during the winter season. It is important to highlight that this fact affects the heat transfer properties of the liquid overall. Since air heating is a highly energy-demanding process, an outlet stream of hot water produced …

Design Of A Dynamometer Test Platform For Formula Sae Internal Combustion And Electric Powertrains, Ryan Bare

Honors Theses

This dynamometer project was completed for the Formula SAE team at Western Michigan University and aimed to deliver a functional and safe engine dynamometer test stand. Formula SAE is a student organization that designs and manufactures a new formula style race car from the ground up every year to compete at an international collegiate competition. The purpose of the dynamometer is to allow the team to tune their internal combustion (IC) engine and the newly developed electric powertrain (EV). The engine dynamometer is important to the Formula team as it will allow engine tuning and diagnosis prior to the completion …

High Power Rocket Motor Test Bench, Jonathan Wine

Honors Theses

Static ground testing of rocket motors is used to gather performance data and troubleshoot the propulsion system, allowing propulsion engineers to compare actual characteristics to the designed parameters. It is also used in the development and validation of new propulsion systems and alterations to the fuel and oxidizer mixtures. Test benches are used to continuously collect data throughout the burn of a rocket motor, which allows engineers to plot the thrust as a function of time. This plot, a thrust curve, displays several important pieces of information about a rocket motor. This information is crucial to allow astronautical engineers to …

Optimization Of Material Flow Of Woodshop Through Layout Redesign, Madison Wegner

Honors Theses

A local high-design outdoor site furniture company – Landscape Forms – worked with the senior design team to create alternative layouts for the woodshop within the company. This senior project will offer three categories of alternative layouts: short, mid, and long term. By offering multiple time frame layouts, Landscape Forms will be able to implement changes based on time frame and need. A project plan indicates all tasks required to meet these objectives as well as a timeline for accomplishing this plan. Research including worker movement diagrams, stakeholder interviews incorporating woodshop employees and engineers, a man and machine utilization study, …

Design And Implementation Of Test Stand Upgrades For Investigating Gearset Churning Losses With Baffles, Matthew Martin

Honors Theses

The automotive industry is continually researching ways to decrease energy losses in drivetrain applications. Rotating gear sets in an oil bath suffer frictional losses due to oil churning. The Center for Advanced Vehicle Design and Simulation (CAViDS) consortium has proposed studies to understand and reduce these churning losses. The primary means to reduce these churning losses are to redirect the oil flow using baffles and/or alter the oil viscosity. To perform churning loss optimization under controlled conditions, an existing test stand was upgraded to improve safety, introduce oil temperature control, and allow for the interchange of baffle designs. For safety, …

Veterans Memorial Park In Colon, Mi, Madelyn Landry

Honors Theses

Located in St. Joseph County, MI, the Village of Colon offers a charming small-town feel and a close connection with nature. For this project, our team will be working to create a new design for a small community park located in the downtown area of Colon along the shores of Palmer Lake. The American Legion is seeking to re-imagine the park into a Veterans memorial to celebrate the service of village residents who have served in the armed forces. Elements requested to be incorporated into the memorial include granite stonework with etched displays, flags for each branch of the military, …

On Hydrophobic Deep Eutectic Solvents: Thermo-Physical Properties And Applications In Gas Solubility, Shan Khai Liew

Masters Theses

Carbon dioxide (CO2) has been widely recognized as one of the greenhouse gases (GHGs) in the atmosphere. GHGs cause global warming, which will bring a lot of problems and irreversible changes. To curb CO2 emissions, much effort has been done. There are many technologies available for CO2 capture, such as amine scrubbing, pressure or temperature swing adsorption, membrane separation, and many solvents and absorbents that have been proposed for CO2 capture (e.g., zeolite, silica materials, graphene, activated carbon, etc.) at every stage (pre-combustion, post-combustion, oxy-combustion). However, these materials have their own drawbacks. Hydrophobic deep eutectic solvents (HDES) is a green …

Design, Simulation, Modeling, And Implementation Of Triboelectric Nanogenerator (Teng) Sensors For Automotive Applications, Sam Ali

Dissertations

Triboelectricity is a promising technique for energy harvesting in which mechanical energy converts to electricity for powering small electronic devices. This method of energy harvesting serves as an alternative to traditional battery power sources and can significantly benefit low-power sensing applications by generating unlimited electrical energy. This study focuses on the development of flexible triboelectric nanogenerators (TENG) and energy harvesting devices for various applications in the automotive industry.

The study is organized into four projects. In the first project, various polymeric materials were used to investigate the performance of different TENGs. Four designs (D1, D2, D3, and D4) of flexible …

Improving Future Vehicle Fuel Economy And Operational Design Domain Through Novel Data Pipelines, Kyle James Carow

Masters Theses

Modern automobiles have greatly advanced in recent years, with technological developments that enhance performance, safety, and comfort. However, there is still much room for improvement. Today’s vehicles are heavily reliant on the combustion of fossil fuels, proven to be harmful for the environment on both a local and global scale. In addition, the safety benefits of autonomous vehicles and advanced driver assistance systems are not yet fully realized due to the limited operational design domain of these technologies. In this research, these needs are addressed through the development of two novel data pipelines. In the first study, a novel methodology …

The Musical Water Fountain, Amy Nielsen

Honors Theses

An affordable musical water fountain was designed over the course of one year. The target consumers for this fountain are middle to upper class homeowners. Based on the design parameters and research found on the topic, the fountain presents an aesthetically pleasing light and water show for residential neighborhoods. The design was sought to be competitive on the market with preexisting fountains. Since it must play music and perform a water and light show all in synchronous, there was confidence in the unique features to sell with today’s consumers. SolidWorks was used extensively to design and model the fountain and …

The Collegiate Aviation Student Guide To Success; A Flight Student’S Perspective, Stephan Jansen Van Vuuren

Honors Theses

This thesis aims to guide incoming students on how to make the most of their time in collegiate aviation and how to increase their chances of success. The primary source of information was my own experience as a flight student at Western Michigan University from 2019 to 2022. Entering aviation as a pilot can be extremely difficult given the high barriers to entry; the most common being the money, know-how, and number of flight hours required to work as a professional airline pilot. It is important to make the right choices given the multitude of decisions professional pilots in training …

Regional Airline Pilot Profession Post Colgan 3407, Brett Maas

Honors Theses

Colgan Air Flight 3407 was a devastating aircraft accident that resulted in the loss of 50 lives (Beresnevicius, 2019). Multiple factors played into the accident, such as pilot credentials, pilot experience, weather, and fatigue. As a result of the accident, the regional airline pilot profession was changed entirely. Changes that spurred because of the accident were both regulatory and compensatory in nature. Regulatory changes include the introduction of the Pilot Records Database (online database that stores pilot training histories), increased flight experience requirements to become a First Officer at an air carrier, and the introduction of proactive rest rules with …