Engineering Commons^™

Evaluation Of The Physicochemical Properties And Stability Of Solid Lipid Nanoparticles Designed For The Delivery Of Dexamethasone To Tumors, Melissa Howard

University of Kentucky Doctoral Dissertations

Pre-clinical and clinical trials suggest that pre-treatment with dexamethasone (Dex) may facilitate enhanced uptake of subsequently administered chemotherapeutic agents. To reduce the side effects associated with systemic administration of Dex, solid lipid nanoparticles (SLNs) containing dexamethasone palmitate (Dex-P) were prepared as a means of achieving tumor-targeted drug delivery. These studies were aimed at evaluating the physicochemical properties and both the physiological and storage stability of the SLNs.

SLNs were prepared using nanotemplate engineering technology. Stearyl alcohol (SA) was used as the lipid phase with Brij^® 78 and Polysorbate 60 as surfactants and PEG6000 monostearate as a long-chain PEGylating agent. …

Synthesis And Energy Applications Of Oriented Metal Oxide Nanoporous Films, Qingliu Wu

University of Kentucky Doctoral Dissertations

This dissertation mainly addresses the synthesis of well-ordered mesoporous titania thin films by dip coating with PEO-PPO-PEO triblock copolymer surfactant template P123. Because P123 is composed of poly(ethylene oxide) [PEO] and poly(propylene oxide) [PPO] blocks, concentrations of ingredients are adjusted to tune the films’ wall thickness, pore size and mesophase. Structural changes are consistent with partitioning of species among PEO blocks, PPO blocks, and the PEO/PPO interface. Titanates localize near PEO and increase wall thickness (by 5 nm to 7 nm). Depending on aging temperature, PPG either swells the PPO cores (when it is hydrophobic) or introduces large (>200 …

Enhancements To The Modified Composite Pattern Method Of Structured Light 3d Capture, Charles Joseph Casey

University of Kentucky Doctoral Dissertations

The use of structured light illumination techniques for three-dimensional data acquisition is, in many cases, limited to stationary subjects due to the multiple pattern projections needed for depth analysis. Traditional Composite Pattern (CP) multiplexing utilizes sinusoidal modulation of individual projection patterns to allow numerous patterns to be combined into a single image. However, due to demodulation artifacts, it is often difficult to accurately recover the subject surface contour information. On the other hand, if one were to project an image consisting of many thin, identical stripes onto the surface, one could, by isolating each stripe center, recreate a very accurate …

A Multi-Stage Decision Support Model For Coordinated Sustainable Product And Supply Chain Design, Haritha Metta

University of Kentucky Doctoral Dissertations

In this research, a decision support model for coordinating sustainable product and supply chain design decisions is developed using a multi-stage hierarchical approach. The model evaluates alternate product designs and their corresponding supply chain configurations to identify the best product design and the corresponding supply chain configuration that maximizes the economic, environmental and societal benefits. The model considers a total life-cycle approach and incorporates closed-loop flow among multiple product lifecycles. In the first stage, a mixed integer linear programming model is developed to select for each product design an optimal supply chain configuration that maximizes the profit. In the subsequent …

Development, Validation, And Application Of A Noninvasive Spinal Motion Measurement System, Shaun Kevin Stinton

University of Kentucky Doctoral Dissertations

Spontaneous vertebral fractures are a large and growing health care problem. Biomechanical factors, specifically, abnormal posture or gait‐related spinal motion may interact with age‐weakened bone to induce altered spinal biomechanics that in turn increase the likelihood of vertebral body fracture. This research takes steps towards the goal of reducing the number of vertebral fractures in two phases: 1) Validation of a noninvasive spinal motion measurement system in cadaver torsos and 2) Application of the measurement system in human subjects.

The cadaver study compared vertebral motion at 4 levels (T7,T12,L3,L5) as measured by adhesive skin markers versus motion measured by bone …

Computational Analyses Of The Uptake And Distribution Of Carbon Monoxide (Co) In Human Subjects, Kinnera Chada

University of Kentucky Doctoral Dissertations

Carbon monoxide (CO) is an odorless, colorless, tasteless gas that binds to hemoglobin with high affinity. This property underlies the use of low doses of CO to determine hemoglobin mass (M_Hb) in the fields of clinical and sports medicine. However, hemoglobin bound to CO is unable to transport oxygen and exposure to high CO concentrations is a significant environmental and occupational health concern. These contrasting aspects of CO—clinically useful in low doses but potentially lethal in higher doses—mandates a need for a quantitative understanding of the temporal profiles of the uptake and distribution of CO …

Improving Sli Performance In Optically Challenging Environments, Eric Dedrick

University of Kentucky Doctoral Dissertations

The construction of 3D models of real-world scenes using non-contact methods is an important problem in computer vision. Some of the more successful methods belong to a class of techniques called structured light illumination (SLI). While SLI methods are generally very successful, there are cases where their performance is poor. Examples include scenes with a high dynamic range in albedo or scenes with strong interreflections. These scenes are referred to as optically challenging environments.

The work in this dissertation is aimed at improving SLI performance in optically challenging environments. A new method of high dynamic range imaging (HDRI) based on …

Solution Phase And Membrane Immobilized Iron-Based Free Radical Reactions: Fundamentals And Applications For Water Treatment, Scott Romak Lewis

University of Kentucky Doctoral Dissertations

Membrane-based separation processes have been used extensively for drinking water purification, wastewater treatment, and numerous other applications. Reactive membranes synthesized through functionalization of the membrane pores offer enhanced reactivity due to increased surface area at the polymer-solution interface and low diffusion limitations. Oxidative techniques utilizing free radicals have proven effective for both the destruction of toxic organics and non-environmental applications. Most previous work focuses on reactions in the homogeneous phase; however, the immobilization of reactants in membrane pores offers several advantages. The use of polyanions immobilized in a membrane or chelates in solution prevents ferric hydroxide precipitation at near-neutral pH, …

Studies On Silicon Nmr Characterization And Kinetic Modeling Of The Structural Evolution Of Siloxane-Based Materials And Their Applications In Drug Delivery And Adsorption, Jyotrhirmai Ambati

University of Kentucky Doctoral Dissertations

This dissertation presents studies of the synthetic processes and applications of siloxane-based materials. Kinetic investigations of bridged organoalkoxysilanes that are precursors to organic-inorganic hybrid polysilsesquioxanes are a primary focus. Quick gelation despite extensive cyclization is found during the polymerization of bridged silane precursors except for silanes with certain short bridges. This work is an attempt to characterize and understand some of the distinct features of bridged silanes using experimental characterization, kinetic modeling and simulation. In addition to this, the dissertation shows how the properties of siloxane- materials can be engineered for drug delivery and adsorption.

The phase behavior of polymerizing …

Nanostructured Arrays For Sensing And Energy Storage Applications, Raghu Mangu

University of Kentucky Doctoral Dissertations

Vertically aligned multi walled carbon nanotube (MWCNT) arrays fabricated by xylene pyrolysis in anodized aluminum oxide (AAO) templates without the use of a catalyst, were integrated into a resistive sensor design. The steady state sensitivities as high as 5% and 10% for 100 ppm of NH₃ and NO₂ respectively at a flow rate of 750 sccm were observed. A study was undertaken to elucidate (i) the dependence of sensitivity on the thickness of amorphous carbon layers, (ii) the effect of UV light on gas desorption characteristics and (iii) the dependence of room temperature sensitivity on different NH_{3 …}

The Application Of Discontinuous Galkerin Finite Element Time-Domain Method In The Design, Simulation And Analysis Of Modern Radio Frequency Systems, Bo Zhao

University of Kentucky Doctoral Dissertations

The discontinuous Galerkin finite element time-domain (DGFETD) method has been successfully applied to the solution of the coupled curl Maxwell’s equations. In this dissertation, important extensions to the DGFETD method are provided, including the ability to model lumped circuit elements and the ability to model thin-wire structures within a discrete DGFETD solution. To this end, a hybrid DGFETD/SPICE formulation is proposed for high-frequency circuit simulation, and a hybrid DGFETD/Thin-wire formulation is proposed for modeling thin-wire structures within a three-dimensional problem space. To aid in the efficient modeling of open-region structures, a Complex Frequency Shifted-Perfectly Matched Layer (CFS-PML) absorbing medium is …

High Performance Piezoelectric Materials And Devices For Multilayer Low Temperature Co-Fired Ceramic Based Microfluidic Systems, Wenli Zhang

University of Kentucky Doctoral Dissertations

The incorporation of active piezoelectric elements and fluidic components into micro-electromechanical systems (MEMS) is of great interest for the development of sensors, actuators, and integrated systems used in microfluidics. Low temperature cofired ceramics (LTCC), widely used as electronic packaging materials, offer the possibility of manufacturing highly integrated microfluidic systems with complex 3-D features and various co-firable functional materials in a multilayer module. It would be desirable to integrate high performance lead zirconate titanate (PZT) based ceramics into LTCC-based MEMS using modern thick film and 3-D packaging technologies. The challenges for fabricating functional LTCC/PZT devices are: 1) formulating piezoelectric compositions which …

Steel Beams Strengthened With Ultra High Modulus Cfrp Laminates, Nisal Abheetha Peiris

University of Kentucky Doctoral Dissertations

Advanced composites have become one of the most popular methods of repairing and/or strengthening civil infrastructure in the past couple of decades. While the use of Fiber Reinforced Polymer laminates and sheets for the repair and strengthening of reinforced concrete structures is well established, research on the application of FRP composites to steel structures has been limited. The use of FRP material for the repair and rehabilitation of steel members has numerous benefits over the traditional methods of bolting or welding of steel plates. Carbon FRPs (CFRPs) have been preferred over other FRP material for strengthening of steel structures since …

Partially Halogenated Acenes And Heteroacenes For Organic Electronics, Balaji Purushothaman

University of Kentucky Doctoral Dissertations

Inorganic materials have dominated electronic applications such as photovoltaic cells, thin film transistors (TFTs) and light emitting diodes (LEDs). However developments in the field of organic electronics over the past three decades have enabled the use of organic materials in these devices. While significant improvements have been made to improve their electronic properties there are several road blocks towards commercial application. One of the significant obstacles is the poor charge carrier mobility associated with organic semiconductors processed by well established printing methods. The goal of my research project is to improve the charge carrier mobility of solution cast films of …

Studies Related To Coulombic Fissions Of Charged Droplets And Hygroscopic Behavior Of Mixed Particles, Harry Cook Hunter Iii

University of Kentucky Doctoral Dissertations

This dissertation describes two independent studies related to charged aerosols. The first study examines the role of electrical conductivity on the amounts of charge and mass emitted during the break-up of charged droplets via Coulombic fission. The second study examines the hygroscopic behavior of mixed particles. The results from both studies are presented here in detail along with an in-depth discussion of pertinent literature and applications in modern technologies.

Charged droplets break-up via a process termed Coulombic fission when their charge density reaches a certain level during which they emit a portion of their charge and mass in the form …

Robust Statistical Methods For Non-Normal Quality Assurance Data Analysis In Transportation Projects, Mohammad Moin Uddin

University of Kentucky Doctoral Dissertations

The American Association of Highway and Transportation Officials (AASHTO) and Federal Highway Administration (FHWA) require the use of the statistically based quality assurance (QA) specifications for construction materials. As a result, many of the state highway agencies (SHAs) have implemented the use of a QA specification for highway construction. For these statistically based QA specifications, quality characteristics of most construction materials are assumed normally distributed, however, the normality assumption can be violated in several forms. Distribution of data can be skewed, kurtosis induced, or bimodal. If the process shows evidence of a significant departure from normality, then the quality measures …

Fabrication And Study Of Molecular Devices And Photovoltaic Devices By Metal/Dielectric/Metal Structures, Bing Hu

University of Kentucky Doctoral Dissertations

A new class of electrodes with nanometer-scale contact spacing can be produced at the edge of patterned metal/insulator/metal this film structures. A key challenge is to produce insulator layers with low leakage current and have pristine metal contacts for controlled molecular contacts. Atomic layer deposition of high quality Al₂O₃ thin films onto Au electrodes was enabled by surface modification with a self-assembled monolayer of -OH groups that react with a monolayer of trimethylaluminum gas source. Ar ion milling was then used to expose the edge of the Au/dielectric/Au structure for molecular electrode contacts. The junctions are characterized …

Computer Simulation Of A Hollow-Fiber Bioreactor: Heparan Regulated Growth Factors-Receptors Binding And Dissociation Analysis, Changjiang Zhang

University of Kentucky Doctoral Dissertations

This thesis demonstrates the use of numerical simulation in predicting the behavior of proteins in a flow environment.

A novel convection-diffusion-reaction computational model is first introduced to simulate fibroblast growth factor (FGF-2) binding to its receptor (FGFR) on cell surfaces and regulated by heparan sulfate proteoglycan (HSPG) under flow in a bioreactor. The model includes three parts: (1) the flow of medium using incompressible Navier-Stokes equations; (2) the mass transport of FGF-2 using convection-diffusion equations; and (3) the cell surface binding using chemical kinetics. The model consists of a set of coupled nonlinear partial differential equations (PDEs) for flow and …

Modeling And Quantitative Analysis Of White Matter Fiber Tracts In Diffusion Tensor Imaging, Xuwei Liang

University of Kentucky Doctoral Dissertations

Diffusion tensor imaging (DTI) is a structural magnetic resonance imaging (MRI) technique to record incoherent motion of water molecules and has been used to detect micro structural white matter alterations in clinical studies to explore certain brain disorders. A variety of DTI based techniques for detecting brain disorders and facilitating clinical group analysis have been developed in the past few years. However, there are two crucial issues that have great impacts on the performance of those algorithms. One is that brain neural pathways appear in complicated 3D structures which are inappropriate and inaccurate to be approximated by simple 2D structures, …

Estimation Of Pedestrian Safety At Intersections Using Simulation And Surrogate Safety Measures, Nithin K. Agarwal

University of Kentucky Doctoral Dissertations

With the number of vehicles increasing in the system every day, many statewide policies across the United States aim to increase the use of non- motorized transportation modes. This could have safety implications because the interaction between motorists and non-motorists could increase and potentially increasing pedestrian-vehicle crashes. Few models that predict the number of pedestrian crashes are not sensitive to site-specific conditions or intersection designs that may influence pedestrian crashes. Moreover, traditional statistical modeling techniques rely extensively on the sparsely available pedestrian crash database.

This study focused on overcoming these limitations by developing models that quantify potential interactions between pedestrians …

Single View Modeling And View Synthesis, Miao Liao

University of Kentucky Doctoral Dissertations

This thesis develops new algorithms to produce 3D content from a single camera. Today, amateurs can use hand-held camcorders to capture and display the 3D world in 2D, using mature technologies. However, there is always a strong desire to record and re-explore the 3D world in 3D. To achieve this goal, current approaches usually make use of a camera array, which suffers from tedious setup and calibration processes, as well as lack of portability, limiting its application to lab experiments.

In this thesis, I try to produce the 3D contents using a single camera, making it as simple as shooting …

Resource Allocation And Efficient Routing In Wireless Networks, Jianjun Yang

University of Kentucky Doctoral Dissertations

In wireless networks, devices (nodes) are connected by wireless links. An important issue is to set up high quality (high bandwidth) and efficient routing paths when one node wants to send packets to other nodes. Resource allocation is the foundation to guarantee high quality connections. In addition, it is critical to handle void areas in order to set up detour-free paths. Moreover, fast message broadcasting is essential in mobile wireless networks. Thus, my research includes dynamic channel allocation in wireless mesh networks, geographic routing in Ad Hoc networks, and message broadcasting in vehicular networks.

The quality of connections in a …

Distal Radioulnar Joint Biomechanics And Forearm Muscle Activity, Joseph Scott Bader

University of Kentucky Doctoral Dissertations

Optimal management of fractures, post-traumatic arthritis and instability of the distal radioulnar joint (DRUJ) requires an understanding of the forces existing across this joint as a function of the activities of daily living. However, such knowledge is currently incomplete. The goal of this research was to quantify the loads that occur at the DRUJ during forearm rotation and to determine the effect that individual muscles have on those loads.

Human and cadaver studies were used to analyze the shear (A-P), transverse (M-L) and resultant forces at the DRUJ and to determine the role that 15 individual muscles had on those …

Three Dimensional Modeling And Animation Of Facial Expressions, Alice J. Lin

University of Kentucky Doctoral Dissertations

Facial expression and animation are important aspects of the 3D environment featuring human characters. These animations are frequently used in many kinds of applications and there have been many efforts to increase the realism. Three aspects are still stimulating active research: the detailed subtle facial expressions, the process of rigging a face, and the transfer of an expression from one person to another. This dissertation focuses on the above three aspects.

A system for freely designing and creating detailed, dynamic, and animated facial expressions is developed. The presented pattern functions produce detailed and animated facial expressions. The system produces realistic …

New Accurate Fault Location Algorithm For Parallel Transmission Lines, Pramote Chaiwan

University of Kentucky Doctoral Dissertations

Electric power systems have been in existence for over a century. Electric power transmission line systems play an important role in carrying electrical power to customers everywhere. The number of transmission lines in power systems is increasing as global demand for power has increased. Parallel transmission lines are widely used in the modern transmission system for higher reliability. The parallel lines method has economic and environmental advantages over single circuit. A fault that occurs on a power transmission line will cause long outage time if the fault location is not located as quickly as possible. The faster the fault location …

Advanced Studies On Series Impedance In Waveguides With An Emphasis On Source And Transfer Impedance, Jinghao Liu

University of Kentucky Doctoral Dissertations

Series impedances, including source and transfer impedances, are commonly used to model a variety of noise sources and noise treatment elements in duct systems. Particle velocity is assumed to be constant on the plane where the series impedances are defined. The research reported herein details investigations into measuring source and transfer impedance. Especially, the measurement and prediction of the transfer impedance of micro-perforated panel (MPP) absorbers is considered.

A wave decomposition method for measuring source impedance and source strength was developed that was purely based on acoustic concepts instead of the equivalent circuit analysis. The method developed is a two-load …

The Relationship Between Information Technology And Construction Productivity, Dong Zhai

University of Kentucky Doctoral Dissertations

Over the past decades, information technology has been impacting industries, economics, the way of life and even the culture throughout the world. Productivity has been attracting much attention as an important indicator of economics, and numerous researchers have investigated the relationship between information technology and productivity. Construction is one of the largest industries in the United States, but little research has been conducted to investigate the relationship between information technology and construction productivity.

The major objective of this dissertation is to determine the degree (if any) to which information technology usage, specifically the use of information technology to automate and …

Real-Time 3-D Reconstruction By Means Of Structured Light Illumination, Kai Liu

University of Kentucky Doctoral Dissertations

Structured light illumination (SLI) is the process of projecting a series of light striped patterns such that, when viewed at an angle, a digital camera can reconstruct a 3-D model of a target object's surface. But by relying on a series of time multiplexed patterns, SLI is not typically associated with video applications. For this purpose of acquiring 3-D video, a common SLI technique is to drive the projector/camera pair at very high frame rates such that any object's motion is small over the pattern set. But at these high frame rates, the speed at which the incoming video can …

Laminar-Turbulent Transition For Attached And Separated Flow, Qian Zhang

University of Kentucky Doctoral Dissertations

A major challenge in the design of turbomachinery components for aircraft gas turbine engines is high cycle fatigue failures due to flutter. Of particular concern is the subsonic/transonic stall flutter boundary which occurs at part speed near the stall line. At these operating conditions the incidence angle is large and the relative Mach number is high subsonic or transonic. Viscous effects dominate for high incidence angles.

In order to predict the flutter phenomena, accurate calculation of the steady and unsteady aerodynamic loading on the turbomachinery airfoils is necessary. The development of unsteady aerodynamic models to predict the unsteady forces and …

Extraction And Prediction Of System Properties Using Variable-N-Gram Modeling And Compressive Hashing, Muthulakshmi Muthukumarasamy

University of Kentucky Doctoral Dissertations

In modern computer systems, memory accesses and power management are the two major performance limiting factors. Accesses to main memory are very slow when compared to operations within a processor chip. Hardware write buffers, caches, out-of-order execution, and prefetch logic, are commonly used to reduce the time spent waiting for main memory accesses. Compiler loop interchange and data layout transformations also can help. Unfortunately, large data structures often have access patterns for which none of the standard approaches are useful. Using smaller data structures can significantly improve performance by allowing the data to reside in higher levels of the memory …