Engineering Commons^™

A Guide To Fifty Years Of Research At Montana Tech: Part 3-Decontamination Of Ratioactively Contaminated Steel By Melt Refining/Slagging Processing, Larry G. Twidwell, Samuel A. Worcester

Metallurgy

This presentation includes a discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering. The discussion is focused on Decontamination of Radioactively Contaminated Steel by Melt Refining/Slagging. This presentation is based on the research of Master of Science graduate students, industrial and academic colleagues, at the Montana College of Mineral Science and Technology (which morphed to Montana Tech [1977], then to Montana Tech of The University of Montana [2000], then to Montana Technological University [2019]). The referenced work of each of the graduate students in this presentation is gratefully acknowledged. The following summary presentation …

High-Pressure Slurry Ablation For Improving Separation Of Copper/Molybdenum And Flotation Of Gold Tailings, Mitchell Harvey

Graduate Theses & Non-Theses

Disa Technologies’ High-Pressure Slurry Ablation (HPSA) is a patented particle attrition technology for the comminution and selective liberation of minerals. Two slurry streams are pumped at high pressure through opposing nozzles and collisions between solid particles suspended in the slurry streams cause breakage of the feed material. HPSA was evaluated for improving the rougher flotation of molybdenite from Cu-Mo bulk concentrate and gold-bearing pyrite from gold tailings.

Copper/molybdenum samples were provided by Montana Resources in Butte, Montana. A two-factor factorial design of experiments was used to identify HPSA operating conditions which gave the highest increase in flotation performance. Variables were …

Optimization Of Porosity In Cold Spray Produced Copper And Zinc Coatings, Cameron Hughes

Graduate Theses & Non-Theses

Since its invention in 1981, the cold spray (CS) additive manufacturing (AM) process has been studied and optimized to produce well-adhered, dense material coatings. CS can operate at a wide range of temperatures if the feed material remains in a solid state. Copper and zinc were studied to characterize and understand the effects of heating element voltage, travel speed, and standoff distance on deposit porosity, grain size, microhardness, and coating thickness. Samples were sprayed on 3.2 mm x 25 mm x 150 mm 6061 aluminum substrates. Sections were taken from the middle of the samples to represent steady-state conditions. Sample …

Predicting The Damage Behavior And Fracture Propagation In A 3d-Printed Synthetic Rock Material With The Distinct Element Method (Pfc3d) And Hybrid Finite-Discrete Element Method (Irazu3d), Frankie Johnston

Graduate Theses & Non-Theses

The ability to monitor and predict the evolution of rock damage and fracture is key for creating reliable and sustainable civil infrastructure. Rock crack propagation is a complex process that is dependent on material properties such as tensile strength, compressive strength, density, elastic modulus, Poisson's ratio, friction coefficient, cohesion, and specimen conditions such as preexisting microcracks, particle size distribution, and mineral distribution. In conjunction with the 56th US Rock Mechanics/Geomechanics Symposium, researchers primarily at Purdue University organized the Damage Mechanics Challenge to determine the current state and future direction of the rock modeling community’s ability to simulate rock crack formation. …

A Guide To Fifty Years Of Research At Montana Tech: Part 2 The Treatment Of Electroplating And Electromachining Metal Hydroxide Sludge For The Recovery Of Metal Values [See Also Part 1), Larry G. Twidwell

Metallurgy

ABSTRACT and FORWARD

The treatment and recovery of metal species from hydrometallurgical solutions and wastewater solids has been and continues to be an important research topic. This presentation includes a guide to the literature with a summary discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering during the 1984-2001 period. A previous presentation (Part 1) focused on the removal of arsenic, selenium, and other species by hydrometallurgical processes and the formation of environmentally stable disposable products. This guide is available at the reference presented above.

This following presentation (Part 2) is based on …

A Guide To Fifty Years Of Research At Montana Tech: Part 1-The Treatment Of Arsenic, Selenium, Thallium, Metal Bearing Solutions And Waste Solids, Larry G. Twidwell

Metallurgy

ABSTRACT and FORWARD

The removal of arsenic, selenium, and metal species from hydrometallurgical solutions and wastewaters has been and continues to be an important research topic. This presentation includes a discussion of the research conducted at Montana Tech in the Department of Metallurgical and Materials Engineering during the past fifty years. The discussion is focused on removal of arsenic by co-precipitation with Fe(III) and Fe(II), co-precipitation with Fe(III) and Al(III), reduction using elemental iron; the removal of selenium by elemental iron and catalysed iron; and the removal of cadmium, copper, nickel, zinc by co-precipitation with Fe(III) and Al(III).

This presentation …

Timeline - History Of The Metallurgy / Mineral Processing Programs (1900-2022), Jerome Downey, Larry G. Twidwell

Metallurgy

No abstract provided.

History Of The Metallurgy / Mineral Processing Programs (1900-2022), Jerome Downey, Larry G. Twidwell

Metallurgy

No abstract provided.

Treatment Of Arsenic-Bearing Minerals And Fixation Of Recovered Arsenic Products: An Updated Review, Larry G. Twidwell

Metallurgy

Mineral processing and extractive metallurgical operations have created and are creating appreciable arsenic bearing wastewater and waste solid products that have to be handled, treated for recycle, or treated for environmentally safe disposal. At present there are intense research and operational activities being conducted to provide the best viable processing procedures to ensure that the mineral processing and extractive metallurgical industries are profitable and environmentally secure. The focus of this presentation is on the element arsenic, even though many other deleterious elements may also be present in ores and concentrates. Numerous base metal resources contain arsenic bearing minerals, especially resources …

Simplified Cost Models For Underground Mine Evaluation A Handbook For Quick Prefeasibility Cost Estimates - Revised Edition, Thomas W. Camm, Scott A. Stebbins

Mining Engineering

This handbook provides simplified cost models for evaluating underground mines. Regression analysis is used to generate capital and operating cost equations for each model in the form Y = AXB, where Y is the cost estimated and X is the assumed production capacity in tonnes per day. A and B are constants determined by the regression analysis. Equations are developed for operating costs in five subcategories: equipment operation, supplies, hourly labor, administration, and sundries. Subcategories for capital costs are: equipment purchase, preproduction underground excavation, surface facilities, engineering & management, contingency, and working capital. Cost models are developed for eight underground …

Correlations Of Subsurface Geotechnical And Geophysical Parameters In Central Montana, David Barrick

Graduate Theses & Non-Theses

This paper summarizes the results of a suite of tests performed in conjunction with a site investigation for the replacement of six timber bridges in Central Montana and four investigative geotechnical boreholes from a nearby ranch. The sites at the six timber bridges consist of Cretaceous sedimentary rocks (shale with stratified sandstone), overlain by thin layers of residual clays or Quaternary alluvium. The geology at the nearby ranch consists of either Quaternary vuggy travertine or Quaternary alluvium/colluvium deposits overlying residual shale of the Mississippian Heath Formation. In total, 49 samples were collected ranging from three Quaternary travertine HQ core samples, …

Investigation Of The Structure, Chemistry And Functional Performance Of Novel Biochars, Julie Elizabeth Muretta

Graduate Theses & Non-Theses

Biochars are a class of carbonaceous materials possessing high degrees of structural and chemical disorder in both organic and inorganic constituent phases. Despite this disorder, and in some cases because of this disorder, biochars have shown strong performance in adsorbing and even sequestering contaminants from soil, surface water and air. Biochar is the carbonaceous, solid product of heating carbonaceous feedstock in an oxygen-limited environment above 250°C, usually sourced from inexpensive, locally available agricultural and forestry wastes which can otherwise be difficult and expensive to dispose of. Biochar possesses attractive functional properties like high specific surface area, high micropore volume, and …

A Study Of The Integration Of Environment, Social, And Governance Policy In The Mining Industry, Ryan Isto

Graduate Theses & Non-Theses

In a push to reach more responsible and sustainable business practices, extractive resource industries like the mining and oil industry have faced increasing pressures to update their policies to reflect the global trend of improving environmental and social responsibility. Industries have adopted numerous corporate social responsibility (CSR) frameworks to shape policies to improve sustainability, mitigate risk, and increase marketability. A CSR that has become increasingly relevant within the mining industry is the use of environmental, social, and governance (ESG) to influence sustainability policy. Mining companies have adopted ESG as a method to influence their corporate policy to manage public relations, …

The Tempering Response Of Cpm® 3v Tool Steel Investigated Through Tensile Testing And Microstructural Observations, Stephen A.C. Hanson

Graduate Theses & Non-Theses

Heat treatment, tensile testing failure analysis, and microstructural evaluation of the Crucible Industries tool steel CPM® 3V was undertaken to investigate CPM® 3V’s tempering response for the following samples: As-Hardened (no tempering); tempered at 450°C, 550°C, 650°C, and 700°C; and As-Received (annealed). CPM® 3V tool steel is manufactured by Crucible Industries using their proprietary Crucible Particle Metallurgy (CPM®) technology. This material was heat-treated at four different tempering temperatures and was evaluated for tensile properties according to ASTM E8. A TMS landmark tensile fixture was used to establish the ultimate tensile strength and the yield strength of the material for the …

Synthesis And Stabilization Of Gold Nanoparticles From Chloride And Cyanide Systems, Kathryn Ariela Bozer

Graduate Theses & Non-Theses

Generating gold nanoparticles (AuNPs) from gold chloride solution by precipitating with compounds can be difficult due to the potentially required high temperatures. Tin chloride can be used to overcome this dilemma. The process that is known to make Purple of Cassius is a method where gold chloride and tin chloride solutions are mixed to form AuNPs and tin oxide precipitate. However, it is modified by adding hydrazine to resolubilize the tin oxide and provide a more stable solution for the AuNPs. A three-factor central composite experimentally designed model was created using Design Expert incorporating pH, temperature, and gold concentration as …

In-Situ Generation Of Hydrocarbons From Kerogen Using Electromagnetic Radiation, Forrest Green

Graduate Theses & Non-Theses

From using surface seeps to modern day exploitation of hydrocarbon source rocks, the petroleum industry is awaiting the next big innovation, accelerated kerogen conversion. In the industry’s history, electromagnetic radiation (EMR) has been used for exploration and now it will be taken to the extreme by determining an effective and efficient method to synthetically generate readily available hydrocarbons. The study starts with examining and defining what kerogen is and its importance as a source material. A strong understanding of what kerogen is, and an analysis of other in-situ projects presents an opportunity to study the finer details of kerogen’s conversion …

Treatment Of Mine Tailings Through Two Methods Of Calcite Precipitation: (I) Using Natural Mineral Trona, (Ii) Microbially Induced Calcite Precipitation Via Denitrification, Nathaniel Small

Graduate Theses & Non-Theses

Mine tailings not only pose environmental risks such as dust emission and acid mine drainage but also present geotechnical risks in cases of tailings dam failures which could lead to loss of human life and severe damages to infrastructure. In-situ cementation of tailings has the potential to reduce the risks associated with such failures as well as the related environmental problems. Over the years, different methods of chemically and microbially induced cementation of tailings have been examined many of which have shown promising results on a laboratory scale and some even on a ϐield scale. In this paper, a new …

Increasing Hydrogen Production In Electrolysis With A Magnetic Field, Laurie Battle

Graduate Theses & Non-Theses

Hydrogen is an important energy carrier that has no carbon emissions when energy is extracted and also can be used as energy storage to increase the practicality of many renewable energy sources. The prominent methods of hydrogen production make use of fossil fuels, resulting in carbon emissions. Electrolysis is a lesser used technology for hydrogen production in which electricity splits water molecules into oxygen and hydrogen gases. If the electricity is sourced from renewable energies, this process releases little to no carbon and the resulting hydrogen is termed “green hydrogen.” While electrolysis and fossil fuel methods have comparable efficiencies of …

Investigating The Possibility Of Using Smelted Water-Cooled Copper Slag Regolith As A Terrestrial Based Lunar Regolith Simulant, Scott A. Morley

Graduate Theses & Non-Theses

There is a need for a stable, efficient, and cost-effective option of a terrestrial lunar regolith simulant that can be easily made and at a lower cost to the consumer. A lunar regolith is the layer of unconsolidated rocky material covering bedrock that is on planets. All simulants fabricated for the moon, are based off three types of lunar regolith areas. The first is the lunar highlands which are the high areas of the moon, these areas are anthracitic. The second is lunar mare which is the meteoroid bombarded areas of the moon that look like dark grey areas from …

Characterizing Hydrostratigraphic Communication Of The Semi-Consolidated Sediment Aquifers Of The Flathead Valley In Northwestern Montana Through Hydrogeophysical Surveys, Elizabeth Katherine Breitmeyer

Graduate Theses & Non-Theses

To accurately forecast the cascading effects of increased stress to a hydrologic system, characterization of the continuity and permeability of the primary confining layer (PCL) separating the shallow and deep intermontane alluvial aquifers is required. Geophysical methods provide a faster cost-effective alternative to drilling to acquire additional information on the changes of hydrostratigraphy with depth. Geoelectric resistivity models recovered through inversion of TEM central loop sounding data to delineate changes in geoelectric properties with depth, providing information on the depth, thickness and resistivity of the hydrostratigraphy. Comparison of geoelectric resistivity models with well completion report lithologies yield information about the …

Fabrication And Characterization Of Manganese Oxide Surfaces From Polymer-Based Fiber Precursors, Molly C. Brockway

Graduate Theses & Non-Theses

Supercapacitors are an energy storage technologycombining properties of both capacitors and batteries to deliver high power and energydensities. Supercapacitors store charge through electrostatic and faradaic interactions between the electrode and ionic electrolyte. By improving the physical structure of electrodes, the interfacial area where energy storage occurs can be increased and electrochemical performance improved. New, fibrous, manganese oxide web-based structures tested for use as a supercapacitor electrode were fabricated by electrospinning and direct calcinationof metal salt-containing polymer fibers, and the effects of fabrication parameters on electrochemical performance were investigated. Data show that high polymer concentrations and low oxide precursor concentrations during …

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #7 [Covering Former Hawthorne School And Aware Early Headstart], Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #6 [Covering Small World Daycare], Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #5 [Covering Mcglone Heights And Skating Rink], Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #4 [Covering Butte Central Elementary & Middle School, Butte Central High School, Butte High School/Annex, East Middle School, Jeremy Bullock Soccer Fields, Webster Garfield School, & Whittier Elementary], Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #3 [Covering Emerson Elementary, Headstart (Former Lincoln School), Headstart (Former Monroe School), & Margaret Leary Elementary], Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #2 (Covering Highland View Christian School, Hillcrest Elementary, Kennedy Elementary, Silver Bow Montessori, & West Elementary), Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Final 2021 Residential Metals Abatement Program (Rmap) School Soil Sampling Field Sampling Plan (Fsp) Submittal #1 (Covering Ramsay Elementary School), Pioneer Technical Services, Inc.

Silver Bow Creek/Butte Area Superfund Site

No abstract provided.

Inhomogeneous Composite Design For High Energy Impact Resistance Through Computational Design, Physical Testing And Analysis, And Mathematical Modeling, Trenin Bayless

Graduate Theses & Non-Theses

Research in the development of impact resistant materials has been an expanding field for the better part of a hundred years. The development of a light penetration resistant and man-portable system that can resist extreme quantities of kinetic energy has been a subject of substantial study. In particular, the use of composite materials, polymers, ceramics, and metals has been critical to the development of the field. With the advent of complex computational programs for defining material properties, it has become possible to use simulations as a starting point for the development of next generation armored systems. To that end, it …

Can Laboratory Results From New Methods Of Measuring Proppant Conductivity Be Used To Better Model Hydraulic Fractures In Reservoir Simulation?, Kofi Dabo

Graduate Theses & Non-Theses

Proppants are a key part of hydraulic fracturing, a technique in oil production that allows the production of hydrocarbons from low permeability reservoirs. The hydraulic fracturing process intends to create new fractures in the rock as well as increase the size, extent, and connectivity of existing fractures. The American Petroleum Institute (API) developed two testing procedures for measuring conductivity of proppants in a laboratory setting, namely; the Short-Term Proppant Conductivity Testing Procedure (API PR 61, 1989) and Long-Term Proppant Conductivity Testing Method (API PR 19D, 2008). However, testing methods produced inconsistent results, with a significant coefficient of variance of ±80% …