Engineering Commons^™

Numerical Investigation Of Heat Generation And Accumulation Contributing To Elevated Temperature In Msw Landfills, Alborz Fathinezhad

LSU Doctoral Dissertations

Landfills are complex geostructures which contains organic and inorganic municipal, and in some cases industrial, wastes and are expected to remain operational for long times. Due to the complex nature of physical, chemical, biological, and thermal reactions that carry on within the depths of a landfill, unexpected incidents such as elevated temperatures could become inevitable. While uncommon to happen, elevated temperatures cause health and environmental issues such as odors, rapid settlements, slope instabilities. In addition, elevated temperatures can negatively impact engineered components in composite bottom liners, cover systems, leachate collection, and gas extraction and recovery systems.

Air intrusion into municipal …

Development Of Reduced Order Models Using Reservoir Simulation And Physics Informed Machine Learning Techniques, Mark V. Behl Jr

LSU Master's Theses

Reservoir simulation is the industry standard for prediction and characterization of processes in the subsurface. However, simulation is computationally expensive and time consuming. This study explores reduced order models (ROMs) as an appropriate alternative. ROMs that use neural networks effectively capture nonlinear dependencies, and only require available operational data as inputs. Neural networks are a black box and difficult to interpret, however. Physics informed neural networks (PINNs) provide a potential solution to these shortcomings, but have not yet been applied extensively in petroleum engineering.

A mature black-oil simulation model from Volve public data release was used to generate training data …

Automated Merging Control Algorithm: A Cooperative Approach For Connected Automated Vehicles In Platoons, Sogand Karbalaieali

LSU Doctoral Dissertations

Transportation systems are being transformed by advanced vehicular connectivity and automation. Human-driven vehicles are being replaced by Connected Automated Vehicles (CAV). The US Department of Transportation’s (DOT) Intelligent Transportation System Joint Program Office (ITS JPO) promotes automated vehicle research which encourages the development and deployment of automated vehicles by infrastructure-based solutions. Advancements in traffic design and operation can offer solutions to the challenges that CAVs face. An example of these challenges is merging on highways where traffic operation could be enhanced by the use of Vehicle to Infrastructure (V2I) communication between the onramp and the mainline vehicles and roadside units …

Mechanistic Modeling Of Nanoparticle-Stabilized Supercritical Co2 Foams And Its Implication In Field-Scale Eor Applications, Doris Patricia Ortiz Maestre

LSU Master's Theses

Previous experimental studies show that nanoparticle-stabilized supercritical CO₂ foams (or, NP CO₂ foams) can be applied as an alternative to surfactant foams, in order to reduce CO₂ mobility in gas injection enhanced oil recovery (EOR). These nanoparticles, if chosen correctly, can be an effective foam stabilizer attached at the fluid interface in a wide range of physicochemical conditions.

By using NP CO₂ foam experiments available in the literature, this study performs two tasks: (i) presenting how a mechanistic foam model can be used to fit experimental data and determine required model parameters, and (ii) investigating the …

The Effects Of Asymmetric Micro Ratchets On Pool Boiling Performance, Lance Austin Brumfield

LSU Doctoral Dissertations

Nucleate boiling is an attractive method for achieving high heat flux at low superheat temperatures. It is frequently used for industrial applications such as heat exchangers and is being considered to cool advanced central processing units (CPU) which produce heat fluxes on the order of 1 MW/m2 and are becoming increasingly less efficient to cool via forced conduction of air. The issue with implementing nucleate boiling as a cooling mechanism lies in the difficulty of quantifying the numerous and complex mechanisms which control the process. A comprehensive nucleate boiling model has yet to be formulated and will be required in …

Numerical Investigation Of Cryopreserved Zebrafish Sperm Cell Activation In Microchannels, Thomas Foster Scherr

LSU Doctoral Dissertations

This aim of this research project is to probe the activation process of zebrafish spermatozoa. Zebrafish are a model species for biological engineering applications, and the cryopreservation of their reproductive cells allows for inexpensive cataloging and maintenance of valuable biological material. Evaluation of cryopreservation protocols for aquatic sperm cells is typically accomplished by motility analysis after subjecting cells to a cryopreservation treatment. In zebrafish sperm cells, motility is initiated when cells come into contact with a hypo-osmotic environment. Subsequent activation analysis is currently done manually and brings with it an inherent difficulty and error. This process is slow and not …

Modeling And Simulation Of Surface Profile Forming Process Of Microlenses And Their Application In Optical Interconnection Devices, Zhengyu Miao

LSU Doctoral Dissertations

Free space micro-optical systems require to integrate microlens array, micromirrors, optical waveguides, beam splitter, etc. on a single substrate. Out-of-plane microlens array fabricated by direct lithography provides pre-alignment during mask fabrication stage and has the advantage of mass manufacturing at low cost. However, this technology requires precise control of the surface profile of microlenses, which is a major technical challenge. The quality control of the surface profile of microlenses limits their applications. In this dissertation, the surface forming process of the out-of-plane microlenses in UV-lithography fabrication was modeled and simulated using a simplified cellular automata model. The microlens array was …

An Intelligent Computational Approach To The Optimization Of Inventory Policies For Single Company, Qinglin Duan

LSU Master's Theses

This study develops and tests a computational approach for determining optimal inventory policies for single company. The computational approach generally comprises of two major components: a meta-heuristic optimizer and an event-driven inventory evaluation module. Meta-heuristic is a powerful search technique, under the intelligent computational paradigm. The approach is capable of determining optimal inventory policy under various demand patterns regardless their distribution for a variety of inventory items. Two prototypes of perishability are considered: (1) sudden deaths due to disasters and (2) outdating due to expirations. Since every theoretical model is specially designed for a certain type of inventory problem while …

Development And Validation Of Biomechanical Models To Quantify Horse Back Forces At The Walk In Three Horse Breeds, Laxmi Raghunandana Kaidapuram

LSU Master's Theses

Therapeutic horseback riding is a common component of physical therapy programs. Quantification of the horse back forces will provide vital information to match therapeutic riders with equine partners. To meet this medical need, a model to quantify the horse back forces from ground reaction forces was developed to test the hypothesis that the forces transferred to a static weight on the horse’s back can be predicted given horse breed and weight. Simultaneous, real time kinetic, kinematic, and back force data on a static weight were collected from 7 adult horses: 3 thoroughbreds, 3 quarter horses, and 1 paso fino. An …

Integrating Demand And Traffic Simulation Modeling To Evaluate Adaptive Evacuation Plans, Thomas Jude Montz, Jr.

LSU Master's Theses

Significant efforts are currently being made by transportation officials to improve the planning and preparation of mass evacuations. The idea of adaptive evacuation plans is an avenue of research that could help improve future evacuation processes. Adaptive evacuation plans stem from the observation that different disaster threat scenarios require different evacuation responses. While adaptive evacuation planning can be generalized to any form of evacuation planning, this project focused on adaptive planning in the context of a hurricane evacuation.

This project was the first to adapt the demand models of Fu, et al, and Cheng, et al, into a regional-scale traffic …

Passenger Car Equivalents Of Trucks Under Lane Restriction And Differential Speed Limit Policies On Four Lane Freeways, John Stanley

LSU Master's Theses

Lane restriction for trucks and differential speed limits for trucks and cars are becoming more common and feasible policies to improve the efficiency and safety of a freeway. It is believed that passenger car equivalents for trucks are impacted by these non typical freeway operating conditions, which are not explicitly addressed by the latest edition of the Highway Capacity Manual. Using simulated and real world data an elevated 18- mile four lane freeway was modeled under the restriction policies. The section which was used as a test bed was simulated under various control variables. Some of the control variables used …

Photocatalytic Reaction In Monolithic Optical Fiber Reactor With Inverse Opal Catalyst, Maoming Ren

LSU Doctoral Dissertations

The development of photocatalytic reactor is essential for the successful application of heterogeneous semiconductor in environmental study, which has been shown to be photoactive and effective to oxidate organic pollutant and photoreduce CO2 to useful compounds. In this dissertation, a monolithic optical fiber reactor (MOFR) coated with inverse opal titania, which uses optical fibers as light-transmitting conductor and support of catalyst, was developed for both photodegradation and photoreduction. 1,2-dichlorobenzene, a volatile organic compound (VOC), was selected as the organic pollutant. This configuration of reactor and catalyst provides a high surface area, enhances mass transfer within the catalyst, manipulates photons transmission …

Experimental And Numerical Study Of Feeding Channel In Proton Exchange Membrane Fuel Cell, Abul Bashar Mahmud Hasan

LSU Master's Theses

The performance of a Proton Exchange Membrane Fuel Cell (PEMFC) using different feeding configurations has been studied, with a focus on the water flooding due to electrochemical reaction. Feeding channel or Bipolar plate in Proton Exchange Fuel Cell is a dominating part. As feeding channel keeps direct contact with the gas diffusion layer, it helps efficiently supplying fuel and air into the gas diffusion layer for efficient production of electricity. Experimental data have been taken at hydrogen flow rates of 20,40,60,80,100 sccm for various bipolar plate arrangements. Three bipolar plates, namely serpentine, straight channel and interdigitated designs, were arranged in …

Simulation And Economic Evaluation Of Coal Gasification With Sets Reforming Process For Power Production, Zachary Hoffman

LSU Master's Theses

Increasing natural gas prices have raised interest in alternate energy resources. Popular belief in the connection between carbon dioxide emissions and global warming has motivated the search for a technique to isolate carbon dioxide from combustion stack gases. Coal gasification with SETS reforming has been proposed as a solution to both of these issues in that it provides an alternate energy source and 100% carbon dioxide sequestration. The purpose of this research is to simulate this process using AspenPlus to perform the rigorous material and energy balances. The results of this simulation are used to carry out a complete economic …

Optimal Operating Strategy For Wells With Downhole Water Sink Completions To Control Water Production And Improve Performance, Ozan Arslan

LSU Doctoral Dissertations

Downhole water sink (DWS) technology is an alternative to conventional limited-entry completions to control water production in wells with bottom water drive. DWS wells comprise two completions: the bottom completion produces water and keeps the top completion open to oil inflow. The system performance depends on careful manipulation of the top and bottom rates to maximize oil productivity and produce oil-free water from the bottom completion. Conventional nodal analysis cannot provide a solution for DWS wells because the critical rates for water coning change with water drainage rate. A reservoir simulator is used to model two-phase flow to the dual …

Mesoscopic Simulation Of Abnormal Grain Growth, Rakesh Kumar Behera

LSU Master's Theses

Grain growth is the process that takes place during annealing of polycrystalline materials; its major feature is a systematic increase in grain size. Two different types of grain growth can be distinguished: the normal and abnormal grain growth. During normal grain growth, the microstructure exhibits a uniform increase in grain size with time and the grain size distribution follows the log-normal distribution with the grain sizes ranging from 0 - 2.2 times the average grain size (R). On the contrary, when the abnormal grain growth is the dominant mechanism, there are certain grains (abnormal grains) in the microstructure that grow …

Bezier Curves For Metamodeling Of Simulation Output, Harish J. Kingre

LSU Master's Theses

Many design optimization problems rely on simulation models to obtain feasible solutions. Even with substantial improvement in the computational capability of computers, the enormous cost of computation needed for simulation makes it impractical to rely on simulation models. The use of metamodels or surrogate approximations in place of actual simulation models makes analysis realistic by reducing computational burden. There are many popular metamodeling techniques such as Polynomial Regression, Multivariate Adaptive Regression Splines, Radial Basis Functions, Kriging and Artificial Neural Networks. This research proposes a new metamodeling technique that uses Bezier curves and patches. The Bezier curve method is based on …

Bayesian Updating Of Simulated Household Travel Survey Data For Small/Medium Metropolitan Areas, Sirisha Murthy Kothuri

LSU Master's Theses

This thesis tests an approach for generating simulated travel survey data that has local characteristics incorporated in it. Travel survey data are generally required for estimating and calibrating travel demand models for a region. The high cost associated with travel surveys puts them beyond the budget of most small/medium MPOs. Therefore simulation of travel survey data provides a viable alternative for these data starved regions to generate data. The simulated data is produced by combining socio-demographic data along with a national survey data set. Updating the simulated data distributions with the distributions obtained by surveying a small sample of local …

Simulation Study And Instability Of Adaptive Control, Zhongshan Wu

LSU Master's Theses

The Minimum-degree Pole Placement algorithm for Self-tuning Regulator design and the Recursive Least-square method and the projection algorithm for plant estimation are studied first in this thesis. Simulation studies for the estimator and controller algorithms are mainly undertaken after describing how to use MATLAB S-function in detail. Not only do Simulation experiments illustrates how and how well the MDPP and RLS algorithms work, but also show how to write and debug MATLAB codes for S-function programs. The robustness of the adaptive control system is intensively discussed subsequently. By using an estimator resistant to the noise contamination, the adaptive control system …