Engineering Commons^™

Influence Of Photoreactor Design Parameters On The Performance Of Ultraviolet Light-Induced Degradation Of Per-And Polyfluoroalkyl Substances By Bismuth Oxy Hydroxy Phosphate And Hexagonal Boron Nitride Photocatalystsinfluence Of Photoreactor Design Parameters On The Performance Of Ultraviolet Light-Induced Degradation Of Per-And Polyfluoroalkyl Substances By Bismuth Oxy Hydroxy Phosphate And Hexagonal Boron Nitride Photocatalysts, Mojtaba Qanbarzadeh

All Dissertations

The main objective of this study is to evaluate the practical applicability of heterogeneous photocatalysis technology powered by ultraviolet (UV) photons for the degradation of per and -polyfluoroalkyl substances (PFAS) in contaminated groundwater samples. For this purpose, bismuth oxyhydroxy phosphate (BOHP) and hexagonal boron nitride (hBN) were utilized as the main photocatalysts in slurry photodegradation systems. BOHP (Bi₃O(OH)(PO₄)₂) is a wide bandgap semiconductor with high activity for degrading long-chain perfluorocarboxylic acids (PFCAs) in mild operational conditions. Boron nitride (BN) is another wide bandgap semiconductor material that was used in this study due to its …

Feasibility Of Using High-Alkali Natural Pozzolans And Reclaimed Fly Ash As Alternative Supplementary Cementitious Materials In Concrete, Weiqi Wang

All Dissertations

Due to the shortage of supplementary cementitious materials (SCMs) in the concrete industry, it is necessary to seek a new alternative. This study evaluates the feasibility of high-alkali SCMs, which were not recommended previously due to potentially exacerbating alkali-silica reaction (ASR) in concrete. The study addresses theSCMs’ ASR mitigation performance, evaluated by ASTM C1567, C1293, and AASHTO T380. Other concrete durability tests, including ASTM C596 drying shrinkage test, ASTM C1012 sulfate resistance test, and ASTM C1202 rapid chloride ions penetration test, were also conducted in this study. The ASTM C311 strength activity index test, thermal gravimetric analysis (TGA), and ASTM …

Effect Of Latex Modified Concrete Overlays With Reduced Surface Preparation On The Load Distribution And Flexural Strength Of Channel Girders, Samuel Dodd

All Theses

This thesis investigates the use of a Latex Modified Concrete (LMC) overlay to increase the strength of prestressed channel girders and enhance their ability to distribute load. The research conducted in this thesis involved material testing of several different LMC mixes and flexural testing of an LMC overlay and girder system. The material testing was used to determine a reasonable LMC mix design and surface preparation method to be used for the overlay. Based on material testing it was concluded that a rapid-set mix and pressure washing of the girder surfaces were a reasonable mix design and surface preparation for …

Nanobubble Technology For The Removal Of Mib And Geosmin From Drinking Water, Meryem Soyluoglu

All Dissertations

The presence of taste and odor (T&O) compounds in drinking water has been historically a major challenge for water utilities. They are difficult to remove using conventional water treatment processes, a combination of coagulation, flocculation, sedimentation, filtration, and chlorination. However, activated carbon (AC) adsorption, advanced oxidation processes, and biofiltration can be effective. The seasonal nature of T&O events makes it difficult to justify installing dedicated treatment technologies. Additionally, incorporating these technologies into existing water treatment plants can be expensive and require significant upgrades. Therefore, water utilities are always interested in exploring new approaches to minimize the occurrence and removal of …

Development Of Scope Of Services For Procurement Of Professional Consultant Services On Transportation Projects – A Study Of South Carolina Department Of Transportation, Ajay Jadhav

All Dissertations

Project Scoping Process (PSP) is one of the significant steps that starts at the very beginning of the project life cycle. During project initiation phase, project scoping is kicked off which includes documenting a list of project-specific goals, deliverables, tasks, costs, and deadlines. The scoping phase duration depends on the project complexity and involves various stakeholders, establishing team, confirming the project purpose and need, initiating the environmental revie process, determining the level of environmental documentation and permit requirements, conducting survey, identifying project risks and tools to mitigate them, and evaluating public involvement strategies. A well-defined PSP is therefore essential for …

Improved Vehicle-Bridge Interaction Modeling And Automation Of Bridge System Identification Techniques, Omar Abuodeh

All Dissertations

The Federal Highway Administration (FHWA) recognizes the necessity for cost-effective and practical system identification (SI) techniques within structural health monitoring (SHM) frameworks for asset management applications. Indirect health monitoring (IHM), a promising SHM approach, utilizes accelerometer-equipped vehicles to measure bridge modal properties (e.g., natural frequencies, damping ratios, mode shapes) through bridge vibration data to assess the bridge's condition. However, engineers and researchers often encounter noise from road roughness, environmental factors, and vehicular components in collected vehicle signals. This noise contaminates the vehicle signal with spurious modes corresponding to stochastic frequencies, impacting damage monitoring assessments. Thus, an efficient and reliable SI …

Generative Neural Network-Based Defense Methods Against Cyberattacks For Connected And Autonomous Vehicles, M Sabbir Salek

All Dissertations

The rapid advancement of communication and artificial intelligence technologies is propelling the development of connected and autonomous vehicles (CAVs), revolutionizing the transportation landscape. However, increased connectivity and automation also present heightened potential for cyber threats. Recently, the emergence of generative neural networks (NNs) has unveiled a myriad of opportunities for complementing CAV applications, including generative NN-based cybersecurity measures to protect the CAVs in a transportation cyber-physical system (TCPS) from known and unknown cyberattacks. The goal of this dissertation is to explore the utility of the generative NNs for devising cyberattack detection and mitigation strategies for CAVs. To this end, the …

High-Energy Storm Events And Their Impacts On Carbon Storage In Tidal Wetlands Of South Carolina, Gavin Gleasman

All Dissertations

Atmospheric carbon dioxide (CO₂) concentrations have been increasing at an accelerating rate for the past two centuries, profoundly impacting global climate change. Atmospheric CO₂ concentrations are influenced by the global carbon cycle through physical and biogeochemical pathways. Tidal wetland environments play a vital role in the global carbon cycle by offsetting atmospheric CO₂ concentrations through their natural physiochemical processes of high autotrophic productivity, allochthonous organic matter deposition, anoxic soils, and continuous accretion which promotes carbon sequestration with long-term storage at the land-ocean margin. The Intergovernmental Panel on Climate Change (IPCC) and United States Global Change Research …

Evaluating The Feasibility Of Using Strain Measured During Sinusoidal Rate Pumping Tests To Characterize An Aquifer, Riley Blais

All Theses

Pumping tests with sinusoidal variation in pumping rate have been proposed as a method for improving aquifer characterization. These tests can interrogate a larger aquifer volume than slug tests and they can be more sensitive to small variations in drawdown. Current methods of using sinusoidal variations of rate are based on measuring pressure signals from the reservoir or aquifer, which requires access to monitoring wells. An alternative approach has been developed that measures the strain in the vadose zone instead of pressure in the reservoir. An instrument has been developed at Clemson University that can measure small strains using optical …

Experimental Investigation Of The Long-Term Bending Deflection And Creep Performance Of Cross-Laminated Timber (Clt), Aaron Desantis

All Theses

Rising popularity in mass timber construction for residential and commercial projects has escalated the need to develop and increase understanding of mass timber products both from a strength and serviceability perspective. For cross-laminated timber (CLT) there is a significant lack of research on the creep characteristics also known as long-term deflection behavior. Creep is particularly important for products such as CLT that are used for floors with longer spans. Full-scale creep testing was conducted using 5-ply CLT panels over the course of 6 months in a controlled environment under dry service condition. Testing resulted in average final deflections 1.73 times …

Effect Of Transverse Post-Tensioning On Moment Distribution Between Channel Girders, William Eubanks

All Theses

This thesis investigates the strength of prestressed concrete channel girders used

in bridges in South Carolina and how to improve their load distribution. The specimens

are 30 feet in length, 33 inches wide and 17 inches deep. South Carolina has 377 bridges

containing prestressed concrete channel girders and many of these bridges received a

poor load rating in a recent load rating project conducted by the South Carolina

Department of Transportation (SCDOT). The research included flexural testing of seven

individual channel girders and load distribution tests of three transversely post-tensioned

channel girders. Individual flexural testing was done to determine the …

Impact Of Granular Activated Carbon On In-Situ Reductive Dechlorination Of Chlorinated Solvents, Reagan Gregory

All Theses

Treatment of chlorinated solvent-contaminated aquifers with in-situ activated carbon offers a simple yet cost-effective treatment opportunity, yet the interactions between activated carbon and the chlorinated solvents and their daughter products are not well understood.

The objective of this research is to demonstrate the impacts of in situ activated carbon on complete reductive dechlorination of chlorinated solvents in contaminated aquifer material with mixed dehalogenating cultures. This research seeks to characterize the sorption of trichloroethene and its daughter products cis-dichloroethene, vinyl chloride, and ethene to granular activated carbon and how that sorption relates to the removal of trichloroethene from contaminated material in …

Understanding The Hydromechanical Effects Of Extreme Events To Improve The Performance Of Infrastructure Foundations, Siddharth Marathe

All Dissertations

Extreme hydroclimatic events like heavy rainfall, flooding, and prolonged drought can potentially cause the failure of infrastructure foundations, leading to socio-economic losses. The objective of this dissertation is to understand the deformation and bearing capacity behavior of drilled shafts subjected to extreme hydroclimatic events, including heavy rainfall, prolonged drought, and earthquake. The Finite Element Method (FEM) results show that during rainfall, the drilled shaft settled caused by a decrease in the porewater pressure in the sand leading to a decrease in the axial bearing capacity. The axial force variation from an experimental investigation showed good agreement with the FEM. The …

The Potential Of Iron Electrodes In Electrochemical Cells For The Stabilization Of Synthetic Urine, Skyler Voisin

All Theses

Source separation and urine treatment present the opportunity to significantly reduce influent concentrations of nitrogen and phosphorus in wastewater treatment plants and to capture those minerals for reuse. This study aims to use electrochemical cells with a sacrificial iron electrode to produce hydrogen peroxide in situ for the stabilization of urea while dissolving ferrous iron ions to promote the precipitation of phosphate into compounds such as vivianite (Fe₃ (PO₄)₂ ∙ 8 H₂O), a precipitate with potential uses in agriculture and manufacturing. Synthetic urine samples were treated as anolyte, then were given time to form …

Vibration Fatigue Of Leaded Solder Joint Interconnects For Pcb Electronics, John Crowder

All Theses

With the increasing prevalence of electronic equipment worldwide, there is also a decrease in the size of the components on their printed circuit boards (PCBs), leading to an increase in the density of these components. A significant amount of failure in electronic equipment is vibration fatigue of solder joints and their attachments. However, the complexity of these PCBs and their components has made finite element modeling (FEM) more complex, adding considerable time to create and analyze a model.

This paper aims to provide a literature review for the vibration fatigue of leaded solder components, create a test setup, and validate …

The Extent Of Drone Education Being Taught In Asc Schools To 4-Year Construction Students, Cheran Teja Dumpati

All Theses

The technology of Unmanned Aircraft Systems (UAS) is growing rapidly in many fields and has become one of the skills in demand in the industry. Universities are one of the primary sources of teaching drone technology with a career-oriented approach. The goal of this study is to investigate the content of the drone curriculum being taught in Associated Schools of Construction (ASC) schools. This includes the topics covered, practical training offered, and the key deliverables taught. This information serves as a foundation for the schools that are looking forward to start drone courses in their department. The research found that …

Investigation Into The Load Transfer Mechanism Of Trees To Develop An Innovative Foundation Configuration Using 3d Finite Element Modeling, Kaleb Boland

All Theses

This study was inspired by a tree’s reliance on its root system that enables it to withstand a natural disaster, such as an extreme hydroclimatic event or hurricane. This curiosity has led to an investigation into what makes this possible, developing a new and innovative foundation configuration for infrastructure systems, and a new possible construction material and method. This study provides results on a material that does not have conventional testing procedures or standards: a tree root. The trees studied are common to the upstate of South Carolina, which are Pine, Sweetgum, and White Oak. According to the results, on …

Design Of Bamboo Reinforced Concrete Beams Considering Variability In Tensile Strength Of Bamboo, Bibek Bhardwaj, Michael Stoner, Weichiang Pang

Publications

In recent years, the price of steel has soared, making steel reinforcement in concrete structures unaffordable for households in low-income countries. Seismic activities in low-income households, particularly those in developing countries, pose a significant threat to life and property to unreinforced concrete structures. The application of bamboo as an alternative to steel in reinforced concrete is still in its early stages of development. Unlike steel, bamboo is a natural material, and its structural properties vary greatly based on species, location, age, and geometric properties. Thus, the design of bamboo-reinforced concrete involves more uncertainties than steel-reinforced concrete. This research investigates the …

Improvement Of A Low-Cost Diy Wave Gauge, Matthew F. Virden, Nigel A. Temple, Bret M. Webb, Eric L. Sparks

The Journal of Extension

The impacts of waves on shorelines and nearshore ecosystems has highlighted the need for extension and other environmental professionals to have access to accurate and affordable wave measurements. The development of a low-cost DIY wave gauge improved the accessibility of these measurements; however, the original design was limited in battery life. Here, an improved version of the low-cost DIY wave gauge, the DIY Feather Wave Gauge, is presented with the same performance, longer battery life, smaller design, and cheaper cost along with tutorials, parts lists, and other resources. This new gauge has been used to improve shoreline management recommendations.

Computational Modeling Of Patterned Membranes And Spacers For Improved Hydrodynamics And Fouling Reduction In Reverse Osmosis Water Treatment Processes, Zuo Zhou

All Dissertations

My research goal is to discover ways to improve the hydrodynamics of reverse osmosis (RO) membrane systems through creative membrane surface patterning and spacer designs. Since concentration polarization (CP) usually promotes membrane fouling, improving hydrodynamics would result in reduced fouling and better membrane performance. With computational fluid dynamics (CFD), we can explore dozens or even hundreds of models with different geometries and boundary conditions. Through plotting their velocity profile, streamlines, shear stress, pressure profile, concentration profile, and so on, we can determine which design would lead to the best performance.

At first, patterned membranes were evaluated and compared with flat …

Explainable Physics-Informed Deep Learning For Rainfall-Runoff Modeling And Uncertainty Assessment Across The Continental United States, Sadegh Sadeghi Tabas

All Dissertations

Hydrologic models provide a comprehensive tool to calibrate streamflow response to environmental variables. Various hydrologic modeling approaches, ranging from physically based to conceptual to entirely data-driven models, have been widely used for hydrologic simulation. During the recent years, however, Deep Learning (DL), a new generation of Machine Learning (ML), has transformed hydrologic simulation research to a new direction. DL methods have recently proposed for rainfall-runoff modeling that complement both distributed and conceptual hydrologic models, particularly in a catchment where data to support a process-based model is scared and limited.

This dissertation investigated the applicability of two advanced probabilistic physics-informed DL …

Force Coefficients And Wind Loads For Wide Flange Section And Retrofitted Pipe Racks, Sovanroth Ou

All Theses

While relatively rare, the failures of steel structures occasionally occur due to extreme wind events such as hurricanes and tornadoes. The American Society of Civil Engineers (ASCE) provides well-defined guidelines for determining wind loads for regular buildings; nonetheless, the actual wind loads for complex open-frame steel structures are not as clearly understood by practicing engineers. Pipe bridges and pipe racks are open-frame structures, commonly used in many petrochemical plants. Over the years, additional pipes are often added to existing pipe racks or pipe bridges to accommodate changes in the operation needs of the petrochemical plant. The objectives of this study …

Development And Evaluation Of Machine Learning Models For Fugitive Methane Detection And Intensity Prediction, Jacquan Pollard

All Theses

The environmental impacts of global warming driven by fugitive methane (CH4) emissions have catalyzed significant research initiatives in developing novel technologies that enable proactive and rapid detection of CH4 emissions. This study evaluated the performance of data-driven machine learning (ML) models using support vector machines (SVM) to detect the presence of trace CH4 emissions and the corresponding intensity amongst various meteorological conditions. The author used simulation data comprising various meteorological parameters such as temperature, relative humidity, wind speed, water vapor, pressure, precipitation rate, and a parameter possessing trace concentrations of CH4 emissions. The novelty of the SVM models developed in …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Evaluating The Effect Of Palmitic Acid Concentration On Growth And Inhibition Of Syntrophomonas Sp., Clancy Kerr

All Theses

Various industries produce fats, oils, and greases (FOG). These hydrophobic compounds cause issues in municipal wastewater collection and treatment systems. Anaerobic co-digestion is an effective way to treat FOG and presents an opportunity to produce more significant quantities of biogas. However, many microorganisms are sensitive to the degradation products like long-chain fatty acids (LCFAs). Palmitic acid is the most prevalent LCFA in anaerobic co-digestion of FOG and wastewater. Sytrophomonas is a β-oxidizer able to break down palmitic acid. Palmitic acid is known to feed and inhibit Syntrophomonas growth and methanogenesis. The objectives of this investigation are: To determine if Syntrophomonas …

Quantum Artificial Intelligence Supported Autonomous Truck Platooning, Pronab Kumar Biswas

All Theses

Truck platooning can potentially increase the operational efficiency of freight movement on U.S. corridors, improving commercial productivity and economic vibrancy. Predicting each leader vehicle trajectory in the autonomous truck platoon using Artificial Intelligence (AI) can enhance platoon efficiency and safety. Reliance on classical AI may not be efficient for this purpose as it will increase the computational burden for each truck in the platoon. However, Quantum Artificial Intelligence (AI) can be used in this scenario to enhance learning efficiency, learning capacity, and run-time improvements. This study developed and evaluated a Long Short-Term Memory Networks (LSTM) model and a hybrid quantum-classical …

Systematic Literature Review Of Roof Systems On Energy Efficiency Of A Building To Support An Ideal Study Framework, Ayushi Raj Dua

All Theses

A sustainable building envelope is a crucial element to build energy efficient structures that contribute towards sustainable communities. The demand for sustainable building envelopes has grown in response to a growing emphasis on sustainable living. The roofing system is an important component of a sustainable building envelope because it influences the building's energy consumption and indoor comfort levels. The current study focuses on roofing systems and associated solar reflectance and albedo values to document the impact on energy efficiency via cooling/heating energy usage, dollar savings and temperature (ambient and surface) reductions due to the roofing systems. Additionally, the study focuses …

Fatigue Performance Of Flexural Retrofits For Precast Slab Bridges, Ian Stewart

All Theses

This thesis discusses flexural and cyclic load testing of two potential retrofits for pre-cast slab bridges. These slabs came from South Carolina Department of Transportation (SCDOT) decommissioned bridges as a part of an ongoing project with SCDOT. The first is a Carbon Fiber Reinforced Plate (CFRP) retrofit where four CFRP plates were adhesively bonded to the bottom of a slab. The second is a steel plate that was mechanically attached to the bottom of a slab using bolted connections. The bolts were cast into grouted holes in the slab. To better understand the failure mode of these retrofits and their …

Impacts Of Preferential Flow On Tc-99and Np-237 Vadose Transport In Soils At The Savannah River Site, Josh Parris

All Theses

Since the 1950s, the United States has produced approximately 90,000 metric tons of spent nuclear fuel (SNF) (Office of Nuclear Energy, 2022); however, no long-term storage solutions are available. Technecium-99 and neptunium-237, two fission products found in SNF, readily form highly mobile species in oxidizing conditions (Hu, 2008; Bondietti, 1979) and have respective half-lives of 2.13 x 10⁵ and 2.14 x10⁶ years (Hu, 2010). Considering these characteristics, ⁹⁹Tc and ²³⁷Np are two risk-driving isotopes found in SNF storage. The process of macropore-facilitated preferential flow, transport through cracks within a soil matrix, has been recognized to increase …

Assessing Key Factors Influencing Fire-Induced Spalling Of Concrete Using Explainable Artificial Intelligence (Xai), Mohammad Khaled Gazi Albashiti

All Theses

This thesis adopts eXplainable Artificial Intelligence (XAI) to identify the key factors influencing the fire-induced spalling of concrete and to extract new insights into the fire-induced spalling phenomenon. In this pursuit, an XAI model was developed, validated, and then augmented with two explainability measures, namely, Shapley Additive exPlanations (SHAP) and Local Interpretable Model-Agnostic Explanations (LIME). The proposed XAI model not only can predict the fire-induced spalling with high accuracy (i.e., >92 %) but can also articulate the reasoning behind its predictions (as in, the proposed model can specify the rationale for each prediction instance); thus, providing us with valuable insights …