Engineering Commons^™

Molecular Dynamics Simulations Of The Spontaneous Deformation And Auxetics Behavior During Tensile Test Of A Nematic Liquid Crystal Elastomer Model, Haoran Wang, Nanang Mahardika

Browse all Datasets

Nematic liquid crystal elastomers (LCEs) are advanced materials known for their shape-changing capability in response to external stimuli such as heat, light and electromagnetic fields. This makes them excellent candidates for applications like soft robotics and energy harvesting. While studies on their physical behavior have shed light on the complex nonlinear mechanics of LCEs, investigations through all-atom molecular dynamics (MD) simulations remain an underutilized avenue compared to experimental and theoretical analyses. This limited use is primarily due to the lack of well-established frameworks for conducting high-fidelity atomistic simulations of LCEs. To bridge this gap, we introduce an all-atom MD simulation …

Murine Hearing Abr/Dpoae Assessments In Cmv-Infected Mouse Pups Receiving Peritoneal Antivirals Of Gcv, Quercetin+P188, Or A Combination. Controls Include Infected And Untreated And Non-Infected And Treated. Second Dataset Of Antiviral Assay In A Murine Stria Vascularis (Sv) Monolayer Cell Culture, David Britt, Albert Park

Browse all Datasets

Ganciclovir (GCV) has been shown to be an effective antiviral for the treatment of congenital cytomegalovirus (cCMV) induced sensorineural hearing loss. However, dose-dependent adverse effects (e.g. neutropenia) require strict, burdensome monitoring, limiting GCV use in some patients. Quercetin is a flavonoid with antioxidant properties that has demonstrated antiviral therapy against CMV. Although more benign than GCV, quercetin has limited therapeutic value due to its poor solubility. We previously reported that GCV improves hearing thresholds in a murine model of cCMV. We also noted that solubilizing quercetin with poloxamer 188 (P188) and combining with GCV therapy amplified CMV inhibition in murine …

Study Into The Sensitity Of The G-H Method To Blending Distance, Cory Goates, Doug Hunsaker

Browse all Datasets

A numerical lifting-line method (implemented in an open-source software package) is presented which can accurately estimate the aerodynamics of wings with arbitrary sweep, dihedral, and twist. Previous numerical lifting-line methods have suffered from grid convergence challenges and limitations in accurately modeling the effects of sweep, or have relied on empirical relations for swept-wing parameters and have been limited in their application to typical wing geometries. This work presents novel improvements in accuracy, flexibility, and speed for complex geometries over previous methods. In the current work, thin-airfoil theory is used to correct section lift coefficients for sweep, providing a more general …

Aircraft Input Files For Pylot And Machupx, Jaden Thurgood

Browse all Datasets

This data was used in an attempt at system identification for rudderless aircraft using simulation.

Data From: Computational Fluid Dynamics Benchmark Validation Experiment Of Plenum-To-Plenum Flow Through Vertical Heated Parallel Channels, Austin W. Parker, Barton L. Smith

Browse all Datasets

This research is focused on the thermal mixing region of parallel jets entering an upper plenum. The highly-coupled thermal-fluid physics are relevant to plenum-to-plenum flow in High Temperature Gas Reactors such as thermal striping phenomena. Experimentally measured boundary conditions and system response quantities for use in Computational Fluid Dynamics were tabulated and published for public use.

Transonic Small-Disturbance Theory/Integral Boundary Layer Airfoil Data For The Low-Fidelity Common Research Model, Jeffrey D. Taylor, Douglas Hunsaker

Browse all Datasets

Lift, Drag, and Moment Coefficient data for the Low-Fidelity Common Research Model wing airfoil sections.

Example Take-Home Final Exam Questions From Cee 433: Water Technology & Policy At The University Of Illinois At Urbana-Champaign, Ashlynn Stillwell

All ECSTATIC Materials

The following example questions were part of take-home final exams spanning 2014-2020 in CEE 433: Water Technology & Policy, taught by Dr. Ashlynn S. Stillwell at the University of Illinois at Urbana-Champaign. These questions were part of the take-home final exam, with additional questions not reported here.

Development Of A Low-Cost, Open Source Miniature Rotary Cell Culture System To Simulate Microgravity Within An Irradiated Environment, Elizabeth Vargis, Jr Dennison

Browse all Datasets

A major challenge for astronauts in long-duration space travel is combatting the hazardous spaceflight environment caused by microgravity and increased levels of ionizing radiation. Microgravity damages cellular DNA by increasing the production of harmful reactive oxygen species, while ionizing radiation damages DNA by creating double-stranded DNA (dsDNA) breaks. Cellular damage due to microgravity and radiation has been investigated using ground-based models, but most models consider microgravity and ionizing radiation alone, or asynchronously. Synchronous modeling better mimics spaceflight conditions and can be used to understand the combined effects of microgravity and ionizing radiation. However, commercially available devices to model microgravity and …

Peloton Tracking And Analysis From The 2016 Tour De France, Tadd T. Truscott, Jesse Belden

Browse all Datasets

The work associated with this project is described in a manuscript entitled "How vision governs the collective behavior of cycling pelotons" by Belden et al., along with an electronic supplementary material document. We investigate properties of densely packed groups of bicycle racers, which are known as cycling pelotons. These pelotons exhibit features of collective animal behavior, including emergent behavior from inter-individual interactions. In this data set, we classify global shapes of the peloton, and identify and track individual cyclists to determine the details of network structure. We also investigate motion waves that propagate through the pelotons.

Incorporating Drones In My Classroom: Survey Data From High School Teachers 2018, Tyson Sorensen, Kelsey Hall, Olivia Horning, Joshua Dallin, David Francis

Browse all Datasets

Survey data collected from 69 high school and middle school teachers. Survey gauges intentions of integrating drone curriculum concepts into the classroom.

Dataset includes summary data, raw data and survey instrument.

Genetic Engineering In Agriculture Curricula For Grades 9-12, Tyson Sorensen, Olivia Horning, Kelsey Hall, David Francis, Joshua Dallin

Browse all Datasets

This is a curriculum package that was developed for teachers to be able to integrate genetic engineering and biotechnology concepts, skills, and career applications into their classrooms. This package was developed as part of the LEARN workshop entitled "Genetic Engineering: Workshop for Teachers." This curriculum package includes five full units of instructions with lesson plans, presentation resources, and other resources for teachers. This package is intended for students in grades 9-12.

Each unit is complete with the corresponding slides found in the main Genetic Engineering PowerPoint. Teachers have the liberty to cover the material on an as-needed bases based on …

Sdnet2018: A Concrete Crack Image Dataset For Machine Learning Applications, Marc Maguire, Sattar Dorafshan, Robert J. Thomas

Browse all Datasets

SDNET2018 is an annotated image dataset for training, validation, and benchmarking of artificial intelligence based crack detection algorithms for concrete. SDNET2018 contains over 56,000 images of cracked and non-cracked concrete bridge decks, walls, and pavements. The dataset includes cracks as narrow as 0.06 mm and as wide as 25 mm. The dataset also includes images with a variety of obstructions, including shadows, surface roughness, scaling, edges, holes, and background debris. SDNET2018 will be useful for the continued development of concrete crack detection algorithms based on deep learning convolutional neural networks, which are a subject of continued research in the field …

A Learning Style Comparison Between Synchronous Online And Face-To-Face Engineering Graphics Instruction, Wade H. Goodridge, Oenardi Lawanto, Harry B. Santoso

Engineering Education Faculty Publications

The implementation of a successful engineering program to a synchronous online curriculum is subject to many impacting factors. One such factor, that has not seen much investigation, concerns learning styles. Student learning styles may have a dramatic influence on the success of a synchronous online deliverable engineering graphics curriculum. The immediate objective of this research was to look at the effectiveness of teaching Engineering Graphics with a synchronous online delivery method and to compare it to a more traditional face-to-face delivery method. Using Kolb’s learning style inventory, student learning styles in both educational settings were investigated and analyzed to discover …

Utilizing Electroencephalography Measurements For Comparison Of Task-Specific Neural Efficiencies: Spatial Intelligence Tasks, Benjamin J. Call, Wade Goodridge, Idalis Villanueva, Nicholas Wan, Kerry Jordan

Engineering Education Faculty Publications

Spatial intelligence is often linked to success in engineering education and engineering professions. The use of electroencephalography enables comparative calculation of individuals' neural efficiency as they perform successive tasks requiring spatial ability to derive solutions Neural efficiency here is defined as having less beta activation, and therefore expending fewer neural resources, to perform a task in comparison to other groups or other tasks. For inter-task comparisons of tasks with similar durations, these measurements may enable a comparison of task type difficulty. For intra-participant and inter-participant comparisons, these measurements provide potential insight into the participant's level of spatial ability and different …

Ag Nanoparticles Generated Using Bio-Reduction And –Coating Cause Microbial Killing Without Cell Lysis, Gade A. Adams, Joan E. Mclean, J. Adams, D. W. Britt, Fenann Shen, A. Jacobson, Y. C. Kim

Civil and Environmental Engineering Faculty Publications

Cost-effective “green” methods of producing Ag nanoparticles (NPs) are being examined because of the potential of these NPs as antimicrobials. Ag NPs were generated from Ag ions using extracellular metabolites from a soil-borne Pythium species. The NPs were variable in size, but had one dimension less than 50 nm and were biocoated; aggregation and coating changed with acetone precipitation. They had dose-dependent lethal effects on a soil pseudomonad, Pseudomonas chlororaphis O6, and were about 30-fold more effective than Ag+ ions. A role of reactive oxygen species in cell death was demonstrated by use of fluorescent dyes responsive to superoxide anion …

Differences In Nutrient And Metal Uptake Among Plant Species In Stormwater Bioretention Systems., M. R. Borecki, Ryan Dupont, Joan E. Mclean

Civil and Environmental Engineering Faculty Publications

No abstract provided.

Use Of Galvanic Skin Responses, Salivary Biomarkers, And Self-Reports To Assess Undergraduate Student Performance During A Laboratory Exam Activity, Idalis Villanueva, Maria Valladares, Wade H. Goodridge

Engineering Education Faculty Publications

Typically, self-reports are used in educational research to assess student response and performance to a classroom activity. Yet, addition of biological and physiological measures such as salivary biomarkers and galvanic skin responses are rarely included, limiting the wealth of information that can be obtained to better understand student performance. A laboratory protocol to study undergraduate students' responses to classroom events (e.g., exams) is presented. Participants were asked to complete a representative exam for their degree. Before and after the laboratory exam session, students completed an academic achievement emotions self-report and an interview that paralleled these questions when participants wore a …

Bioenergy From Wastewater-Based Biomass, Ronald C. Sims, Sean K. Bedingfield, Reese Thompson, Judith L. Sims

Biological Engineering Faculty Publications

The U.S. Department of Energy (DOE) has stated that biomass is the only renewable resource that can supplant petroleum-based liquid transportation fuels in the near term. Wastewater is beginning to be viewed as a potential resource that can be exploited for biomass production and conversion to bioenergy. We suggest that using wastewater from municipalities and industries as a resource for cultivating biomass and combining wastewater treatment with the production of biomass for bioenergy would provide benefits to both industries. Two waste-based biomass production systems that currently have large nationwide infrastructures include: (1) wastewater treatment systems that can be used to …

Python Examples For Multiobjective Data Visualization, J. Herman

All ECSTATIC Materials

Example data file and code to plot N-dimensional scatter plot, parallel axis plot, and a matrix of 2-dimensional scatter plots.

A Research Experiences For Undergraduates (Reu) Site Program On Engineering Education Research, Ning Fang, Oenardi Lawanto, Wade H. Goodridge, Idalis Villanueva, Kurt Becker

Engineering Education Faculty Publications

This paper describes a U.S. National Science Foundation-funded Research Experiences for Undergraduates (REU) Site program that aims to provide undergraduate students with experiences in engineering education research (i.e., education research in the context of engineering). This paper provides an overview of the program and briefly describes the common intellectual focus of this REU Site program. Over the past two years, a total of 16 undergraduate students, seven graduate mentors, and five faculty mentors have actively participated in the program. Four important components of the program are described in this paper, including student recruitment and selection, REU seminars, weekly reflections, and …

Experimental Validation Data For Cfd Of Forced Convection On A Vertical Flat Plate, Jeff R. Harris, Blake W. Lance, Barton L. Smith

Mechanical and Aerospace Engineering Faculty Publications

A CFD validation data set for turbulent forced convection on a vertical plate is presented. The design of the apparatus is based on recent validation literature and provides a means to simultaneously measure boundary conditions and system response quantities. All important inflow quantities for RANS CFD are also measured. Data are acquired at two heating conditions and cover the range 40;000 < Rex < 300;000, 357 < Red2 < 813 and 0:02 < Gr/Re2 < 0:232. The data and uncertainties are contained in files in the supplemental material

Dehalococcoides Abundance And Alternate Electron Acceptor Effects On Large, Flow-Through Trichloroethene Dechlorinating Columns, Babur S. Mirza, Darwin L. Sorensen, Ryan Dupont, Joan E. Mclean

Civil and Environmental Engineering Faculty Publications

Trichloroethene (TCE) in groundwater is a major health concern and biostimulation/bioaugmentation-based strategies have been evaluated to achieve complete reductive dechlorination with varying success. Different carbon sources were hypothesized to stimulate different extents of TCE reductive dechlorination. Ecological conditions that developed different dechlorination stages were investigated by quantitating Dehalococcoides 16S rRNA (Dhc) and reductive dehalogenase gene abundance, and by describing biogeochemical properties of laboratory columns in response to this biostimulation. Eight large columns (183 cm × 15.2 cm), packed with aquifer material from Hill AFB, Utah, that were continuously fed TCE for 7.5 years. Duplicate columns were biostimulated with whey or …

Development Of A Decision-Making Methodology To Design A Water Quality Monitoring Network, J. Keum, Jagath J. Kaluarachchi

Civil and Environmental Engineering Faculty Publications

The number of water quality monitoring stations in the USA has decreased over the past few decades. Scarcity of observations can easily produce prediction uncertainty due to unreliable model calibration. An effective water quality monitoring network is important not only for model calibration and water quality prediction but also for resources management. Redundant or improperly located monitoring stations may cause increased monitoring costs without improvement to the understanding of water quality in watersheds. In this work, a decision-making methodology is proposed to design a water quality monitoring network by providing an adequate number of monitoring stations and their approximate locations …

Biostimulation And Bioaugmentation To Enhance Reductive Dechlorination Of Tce In A Long-Term Flow Through Column Study, Joan E. Mclean, Jared Ervin, Jing Zhou, Darwin L. Sorensen, Ryan Dupont

Civil and Environmental Engineering Faculty Publications

Large laboratory columns (15.2 cm diameter, 183 cm long) were fed with groundwater containing trichloroethylene (TCE), were biostimulated and bioaugmented, and were monitored for over 7.5 years. The objective of the study was to observe how the selection of the carbon and energy source, i.e., whey, Newman Zone® standard surfactant emulsified oil and Newman Zone nonionic surfactant emulsified oil, affected the rate and extent of dechlorination. Column effluent was monitored for TCE and its degradation products, redox indicators (nitrate-N, Fe(II), sulfate), and changes in iron mineralogy. Total bacteria and Dehalococcoides mccartyi strains were quantified using q-PCR. Complete dechlorination was only …

Particulate-Matter Emission Estimates From Agricultural Spring-Tillage Operations Using Lidar And Inverse Modeling, Kori D. Moore, Michael D. Wojcik, Randy S. Martin, Christian C. Marchant, D. S. Jones, W. J. Bradford, G. E. Bingham, R L. Pfeiffer, J. H. Prueger, J. L. Hatfield

Civil and Environmental Engineering Faculty Publications

Particulate-matter (PM) emissions from a typical spring agricultural tillage sequence and a strip–till conservation tillage sequence in California’s San Joaquin Valley were estimated to calculate the emissions control efficiency (ηη) of the strip–till conservation management practice (CMP). Filter-based PM samplers, PM-calibrated optical particle counters (OPCs), and a PM-calibrated light detection and ranging (LIDAR) system were used to monitored upwind and downwind PM concentrations during May and June 2008. Emission rates were estimated through inverse modeling coupled with the filter and OPC measurements and through applying a mass balance to the PM concentrations derived from LIDAR data. Sampling irregularities and errors …

Experimental Validation Data For Cfd Of Transient Convection From Forced To Natural With Flow Reversal On A Vertical Flat Plate, Blake W. Lance, Barton L. Smith

Engineering Datasets

Transient convection was investigated experimentally for the purpose of providing Computational Fluid Dynamics (CFD) validation data. A specialized facility for validation experiments called the Rotatable Buoyancy Tunnel was used to acquire thermal and velocity measurements of flow over a smooth, vertical heated plate. The initial condition was forced convection downward with subsequent transition to mixed convection, ending with natural convection upward after a flow reversal. Data acquisition through the transient was repeated for ensemble-averaged results. With simple flow geometry, validation data were acquired at the benchmark level. All boundary conditions (BCs) were measured and their uncertainties quantified. Temperature profiles on …

Experimental Validation Data For Cfd Of Mixed Convection On A Vertical Flat Plate, Blake W. Lance, Jeff R. Harris, Barton L. Smith

Mechanical and Aerospace Engineering Faculty Publications

Model validation for Computational Fluid Dynamics(CFD), where experimental data and model outputs are com-pared, is a key tool for assessing model uncertainty. In this work, mixed convection is studied experimentally for the purpose of providing validation data for CFD models with a high level of completeness. Experiments are performed in a facility built specifically for validation with a vertical, flat,heated wall. Data were acquired for both buoyancy-aided and buoyancy-opposed flows. Measured boundary conditions include as-built geometry, inflow mean and fluctuating velocity profiles, and inflow and wall temperatures. Additionally, room air temperature, pressure, and relative humidity are measured to provide fluid …

Remediation Of Polycyclic Aromatic Hydrocarbons In Soil Using Hemoglobin-Catalytic Mechanism, Guyoung Kang, Kapsung Park, Jaechang Cho, David King Stevens, Namhyun Chung

Civil and Environmental Engineering Faculty Publications

It is suggested in this paper that recalcitrant organopollutants can be degraded efficiently by a hemoglobin-catalytic reaction in the presence of hydrogen peroxide (i.e., H2O2). The catalytic mechanism was studied with 5-aminosalicylic acid (5-ASA) as a compound for oxidation. Various evidence suggests that the catalytic mechanism is very similar to those of horseradish peroxidase and lignin peroxidase. The catalytic intermediates are known to oxidize various chemicals, indicating that the intermediates of hemoglobin can nonspecifically degrade many different types of organopollutants. To prove the hypothesis, an attempt was made to remediate polycyclic aromatic hydrocarbon (PAH)-contaminated field soil. The results showed that …

Can Suspended Fine Sediment Transport In Shallow Lakes Be Predicted Using Mvrvm With Limited Observations?, H. A. Batt Ph.D., David King Stevens

Civil and Environmental Engineering Faculty Publications

The study of sediment transport in water natural bodies is a challenging task. There have been several attempts to describe sediment mathematically using hydraulic characteristics of water bodies. Most researchers who developed empirical formulas to describe sediment transport performed laboratory experiments with assumptions that did not take into account variations of hydraulic parameters and the fine sediment sizes that are part of this phenomenon. Recently, new approaches for studying sediment transport have been developed involving the use of machine-learning algorithms that have proven accuracy and efficiency in predicting sediment transport. A novel machinelearning method, the Multivariate Relevance Vector Machine (MVRVM), …

Experimental Validation Data For Cfd Of Steady And Transient Mixed Convection On A Vertical Flat Plate, Blake W. Lance

Browse all Datasets

Simulations are becoming increasingly popular in science and engineering. One type of simulation is Computation Fluid Dynamics (CFD) that is used when closed forms solutions are impractical. The field of Verification & Validation emerged from the need to assess simulation accuracy as they often contain approximations and calibrations.

Validation involves the comparison of experimental data with simulation outputs and is the focus of this work. Errors in simulation predictions may be assessed in this way. Validation requires highly-detailed data and description to accompany these data, and uncertainties are very important.

The purpose of this work is to provide highly complete …