Engineering Commons^™

Evaluating The Permeability Of Porous Aggregate Concrete Using Electrical Resistivity-Based Measurements, Ariel Miguel Mendez Aragoncillo

Theses and Dissertations

Recycled concrete aggregates (RCA) and lightweight aggregates (LWA) are popular alternative aggregates for concrete. However, due to their highly porous structure, concrete with RCA and LWA shows a different microstructure and higher permeability than conventional concrete. Thus, the existing relationships used to evaluate the permeability and, consequently, the durability of concrete are not applicable in concretes with RCA and LWA. This research examined the permeation properties of recycled aggregate concrete (RAC) and lightweight aggregate concrete (LWAC). The relationships between electrical resistivity-based measurements in RAC and LWAC and their permeation properties were determined and compared to that of normal weight aggregate …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A Sarkar, Hossam Abohamer, Mohammad Oyan

Data

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

A New Generation Of Dense-Graded Asphalt Mixtures With Superior Performance Against Stripping And Moisture Damage, Mostafa Elseifi, Zahid Hossain, Md. T.A. Sarkar, Hossam Abohamer, Mohammad Oyan

Publications

The presence of moisture beneath the pavement surface is a matter of great concerns as it is responsible for significant distresses such as asphalt concrete (AC) stripping, fatigue cracking, rutting, and poor durability of asphalt mixes. The objective of this study was to evaluate and recommend an asphalt mixture design that would provide superior performance against AC stripping and cracking. To achieve this objective, a laboratory test factorial was developed to evaluate the use of nanomaterials, emerging anti-stripping agents, warm-mix asphalt technologies, and adhesion promotors. In the experimental program, the modified Lottman test (AASHTO T 283) and the Indirect Tensile …

Alternative Supplementary Cementitious Materials In Ultra-High Performance Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, Gregory J, Gonzales, William K. Toledo, Judit M. Garcia

Data

Ultra-high performance concrete (UHPC) is an emerging material with remarkable mechanical and durability properties that contains large amounts of cementitious materials. Silica fume is a main supplementary cementitious material (SCM) in UHPC, however, it is more expensive than cement and other SCMs, so it is often substituted with inexpensive class F fly ash. Unfortunately, future availability of fly ash is uncertain as the energy industry moves toward renewable energy. Fly ash shortages create an urgent need to find cost-effective and environmentally-friendly alternatives for fly ash. This study investigated replacing cement, fly ash, and silica fume in UHPC mixtures with ground …

Alternative Supplementary Cementitious Materials In Ultra-High Performance Concrete, Craig Newtson, Seyedsaleh Mousavinezhad, Gregory J. Gonzales, William K. Toledo, Judit M. Garcia

Publications

Ultra-high performance concrete (UHPC) is an emerging material with remarkable mechanical and durability properties that contains large amounts of cementitious materials. Silica fume is a main supplementary cementitious material (SCM) in UHPC, however, it is more expensive than cement and other SCMs, so it is often substituted with inexpensive class F fly ash. Unfortunately, future availability of fly ash is uncertain as the energy industry moves toward renewable energy. Fly ash shortages create an urgent need to find cost-effective and environmentally-friendly alternatives for fly ash. This study investigated replacing cement, fly ash, and silica fume in UHPC mixtures with ground …

Durability Of Concrete Produced With Alternative Supplementary Cementitious Material, Craig Newtson, Brad Weldon, Judit Garcia, Seyedsaleh Mousavinezhad, William Toledo

Data

Historically, Class F fly ash has been chosen as a supplementary cementitious material (SCM) in concrete for its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain because the energy industry has been investing in renewable energy production and removing coal burning generating stations from operation. Consequently, there is a growing need to find new, cost effective and environmentally friendly alternatives to fly ash. This study investigated a locally available natural pozzolan mined from a pumicite deposit near Espanola, NM for its ability to mediate ASR. Concrete and mortar mixtures included SCM contents ranging from …

Durability Of Concrete Produced With Alternative Supplementary Cementitious Material, Craig Newtson, Brad Weldon, Judit Garcia, Seyedsaleh Mousavinezhad, William Toledo

Publications

Historically, Class F fly ash has been chosen as a supplementary cementitious material (SCM) in concrete for its ability to mitigate alkali-silica reaction (ASR). However, future availability of fly ash is uncertain because the energy industry has been investing in renewable energy production and removing coal burning generating stations from operation. Consequently, there is a growing need to find new, cost effective and environmentally friendly alternatives to fly ash. This study investigated a locally available natural pozzolan mined from a pumicite deposit near Espanola, NM for its ability to mediate ASR. Concrete and mortar mixtures included SCM contents ranging from …

Evaluation Of Alternative Sources Of Supplementary Cementitious Materials (Scms) For Concrete Materials In Transportation Infrastructure, Gabriel A. Arce, Miladin Radovic, Zahid Hossain, Marwa Hassan, Sujata Subedi

Data

Fly ash is the most utilized supplementary cementitious material (SCM) in the US. Nonetheless, rapid decline in coal-fired power generation threatens its supply. The objective of this study was to evaluate alternative SCMs for concrete transportation infrastructure in Region 6. SCMs investigated included reclaimed fly ash (RFA), reclaimed ground bottom ash (GBA), metakaolin (MK), and conventional Class F fly ash (FA) as a reference. SCMs were characterized and the fresh and hardened properties of concrete incorporating different dosages (i.e., 10, 20, and 30% cement replacement by mass) of the individual SCMs (i.e., binary systems) and blended SCM systems of RFA-MK …

Evaluation Of Alternative Sources Of Supplementary Cementitious Materials (Scms) For Concrete Materials In Transportation Infrastructure, Gabriel A. Arce, Miladin Radovic, Zahid Hossain, Marwa Hassan, Sujata Subedi

Publications

Fly ash is the most utilized supplementary cementitious material (SCM) in the US. Nonetheless, rapid decline in coal-fired power generation threatens its supply. The objective of this study was to evaluate alternative SCMs for concrete transportation infrastructure in Region 6. SCMs investigated included reclaimed fly ash (RFA), reclaimed ground bottom ash (GBA), metakaolin (MK), and conventional Class F fly ash (FA) as a reference. SCMs were characterized and the fresh and hardened properties of concrete incorporating different dosages (i.e., 10, 20, and 30% cement replacement by mass) of the individual SCMs (i.e., binary systems) and blended SCM systems of RFA-MK …

Evaluation Of Bagasse Ash As Cement And Sand Replacement For The Production Of Engineered Cementitious Composites (Ecc), Gabriel Arce, Marwa Hassan, Sujata Subedi, Ana Rivas, Samantha Hidalgo, Hugo Eguez

Data

The objective of this study was to develop novel Engineered Cementitious Composites (ECC) materials implementing sugarcane bagasse ash (SCBA). To this end, the effects on the mechanical and physical properties of ECC materials of: (1) Louisiana raw SCBA (RBA) as a partial and complete replacement of sand (i.e., class S mixtures); (2) Louisiana post-processed SCBA (PBA) as a partial replacement of cement (i.e., class C mixtures); and (3) Ecuador raw SCBA (EBA) as a partial and complete replacement of sand (i.e., class S-E mixtures) were studied. Sand replacement levels with RBA and EBA evaluated were 25, 50, 75, and 100% …

Evaluation Of Bagasse Ash As Cement And Sand Replacement For The Production Of Engineered Cementitious Composites (Ecc), Gabriel Arce, Marwa Hassan, Sujata Subedi, Ana Rivas, Samantha Hidalgo, Hugo Eguez

Publications

The objective of this study was to develop novel Engineered Cementitious Composites (ECC) materials implementing sugarcane bagasse ash (SCBA). To this end, the effects on the mechanical and physical properties of ECC materials of: (1) Louisiana raw SCBA (RBA) as a partial and complete replacement of sand (i.e., class S mixtures); (2) Louisiana post-processed SCBA (PBA) as a partial replacement of cement (i.e., class C mixtures); and (3) Ecuador raw SCBA (EBA) as a partial and complete replacement of sand (i.e., class S-E mixtures) were studied. Sand replacement levels with RBA and EBA evaluated were 25, 50, 75, and 100% …

About The Influence Of The Organosilicon Hydrophobizer "Gidrofob" On The Properties Of Non-Autoclave Gas Concrete, V.M. Tsoy, S. Hodjayev

Journal of Tashkent Institute of Railway Engineers

The article examines the effect of hydrophobizing additives on the normal density and setting time of the cement paste and the strength of the cement stone. We used an organosilicon additive - "Hydrophobe" as a water-repellent additive. As a result of research, it was found that the introduction of a water repellent agent, depending on its dosage, leads to a significant increase in the setting time and insignificantly affects the strength

Production Of Fire-Resistant Concrete Based On Technogenic Waste, Uzmonjon Turgunaliyevich Yusupov

Journal of Tashkent Institute of Railway Engineers

The article notes that at present, with the development of the construction industry, the need for fire-resistant concrete is also increasing. In increasing the volume of construction, concrete and other components are some of the resources available at the price of finished objects achieved through cost reduction. It is determined that the developed fire- and heat-resistant concrete, prepared according to the technological requirements developed by us and the established standards, will provide the facility with reliable fire safety and longevity

Feasibility Study Of Development Of Ultra-High Performance Concrete (Uhpc) For Highway Bridge Applications In Nebraska, Flavia Ribeiro Furtado De Mendonca, Mostafa Abo El-Khier, George Morcous, Jiong Hu

Nebraska Department of Transportation: Research Reports

Ultra-high performance concrete (UHPC) is a new class of concrete that has superior mechanical, durability, and workability properties that far exceed those of conventional concrete. To achieve these properties, a specific mix design with a very dense internal structure, fiber reinforcement, and low water-to-binder ratio (w/b) is commonly used. The goal of this research is to develop a non-proprietary UHPC mix with constituent materials that are readily available in the state of Nebraska for bridge construction applications. In developing this mix, the particle packing model is used, and an experimental study of the impact of various design parameters on the …

Research Of System Conditions For Formation Of Failure On Mathematical Models By The Results Of The Research Of Reinforced Concrete Bridges, E.T. Yaxshiev, F.Z. Zokirov, A.B. Karimova

Journal of Tashkent Institute of Railway Engineers

Based on the data of field surveys, the results of assessing the state of reinforced concrete span structures of bridges and characteristic defects that occur in the structure during operation are presented. An analysis of the results of inspections and periodic inspections responsible for the operation of artificial structures shows that a significant part of reinforced concrete spans has various types of defects and damage to load-bearing structures. Studies show that defects have a significant impact on the operational properties of reinforced concrete spans, leading both to a limitation of the speed regime of train movements and to the emergence …

Long-Term Durability Of Frp Bond In The Midwest United States For Externally-Strengthened Bridge Components, Sasan Siavashi, Christopher D. Eamon, Abdel A. Makkawy, Hwai-Chung Wu

Civil and Environmental Engineering Faculty Research Publications

In this study, the bond strength of a typical FRP system subjected to long-term natural weathering in the Midwest United States is experimentally investigated, and the rate of degradation is estimated. To do this, the bond strength of an FRP system exposed to over fifteen years of weathering is determined with pull-off testing, and a relationship between strength reduction and exposure time is developed using regression analysis. For unweathered specimens, it was found that the attachment strength of the FRP system was governed by the concrete substrate, while for weathered specimens, the FRP system could detach by either a failure …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Data

Corresponding data set for Tran-SET Project No. 17CLSU08. Abstract of the final report is stated below for reference:

"Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the …

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Publications

Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the corrosion precursors and the corrosion process during damage evolution. Therefore, this work aims to develop and characterize the …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

Mitigation And Evaluation Of Alkali-Silica Reaction (Asr) And Freezing And Thawing In Concrete Transportation Structures, Richard Albert Deschenes Jr.

Graduate Theses and Dissertations

An evaluation of alkali-silica reaction (ASR) and freezing and thawing (F/T) in concrete transportation structures is presented along with mitigation methods for slowing the rate of deterioration in concrete. A combination of field and laboratory testing confirms ASR deterioration is exacerbated by exposure to F/T. Laboratory testing indicates an aggregate previously deemed inert to ASR, caused ASR deterioration in several concrete pavement and transportation structures. Existing standard test methods deem this aggregate safe for use in concrete. A modified test method shows the concrete can deteriorate rapidly when subjected to cycles of conditions promoting ASR and F/T. Several structures containing …

Polyvinyl Alcohol (Pva) Fiber-Reinforced Rubber Concrete And Rubberized Self-Compacting Concrete, Jiaqing Wang

Dissertations, Master's Theses and Master's Reports

This study experimentally investigates the mechanical performance and durability of Polyvinyl Alcohol (PVA) fiber-reinforced rubber concrete and the rubberized self-compacting concrete. The waste rubber particles were introduced as a partial replacement of fine aggregate in the plain concrete. In addition, the waste tire rubbers were pre-treated with alkali surface treatment method to enhance the performance. The PVA fibers were added to the concrete mixes to enhance the post-failure resistance and thus fracture energy. Rubberized fiber concrete samples were prepared with different fine aggregate replacement ratios and the optimum fiber content. At the same time, the rubber particles had been used …

Improving The Laboratory Design Of Asphalt Mixtures To Enhance Asphalt Pavement Durability, Ali Hekmatfar

Open Access Dissertations

Most departments of transportation, including Indiana’s, currently use the Superpave mixture design method to design asphalt mixtures. This method specifies that the optimum asphalt content for a given gradation be selected at 4 percent air voids. During construction, these mixtures are typically compacted to 7-8 percent air voids. If mixtures were designed to be more compactable in the field they could be compacted to the same density as the laboratory mixture design, which would increase pavement durability by decreasing the in-place air voids. The objective of this research was to enhance the asphalt mixture design method in order to increase …

Factors Affecting Asphalt Pavement Density And The Effect On Long Term Pavement Performance, Jonathan Fisher, Clark Graves, Phillip Blankenship, Salman Hakimzadeh-Khoee, R. Michael Anderson

Kentucky Transportation Center Research Report

The Kentucky Transportation Center, the Asphalt Institute, and the Kentucky Transportation Cabinet worked together in order to identify factors that affect asphalt pavement density, and to then evaluate their effect on long term pavement performance.

By determining which variables are most influential to pavement performance (i.e. roller pattern, temperature when rolled, etc.), and then monitoring the attention given to those variables, Kentucky would be able to increase the service life of asphalt roadways by at least 25%, therefore saving as much as $30 million annually on a resurfacing budget of $129.2 million (2007), while still maintaining the current roadway level …

Evaluation Of The Use Of Snowplowable Raised Pavement Markers, Kenneth R. Agent, Eric R. Green

Kentucky Transportation Center Research Report

The objective of this study was to evaluate the effectiveness and durability of snowplowable raised pavement markers (RPM) installed on the RPM system in Kentucky. The durability evaluation dealt with the marker housing.

The data show that continued use of the currently approved snowplowable RPM can be justified if the castings are properly installed on new pavements with a commitment that the pavement will be maintained. An evaluation of centerline rumble strips installations showed that they should be considered on rural, two-lane roads with 12-foot lane widths (having new pavements) and paved shoulders.

Evaluation Of Diamond Grade Reflective Sheeting, Kenneth R. Agent

Kentucky Transportation Center Research Report

The objective of this project was to monitor the performance of the diamond grade sheeting when used on both typical traffic signs and construction signs. The durability, appearance, and reflectivity of the signs were monitored. Diamond grade sheetings used on typical traffic signs were evaluated over a two-year period with construction signs evaluated over an 18-month period.

Diamond grade sheeting was found to provide increased reflectivity compared to high intensity sheeting with no problems noted related to durability or appearance. However, the cost of the diamond grade sheeting would limit its use to situations where brighter, wider-angle reflective sheeting is …

Evaluation Of Stamark Brand Bisymmetric 1.75 Grade Pavement Marking Tape, Kenneth R. Agent

Kentucky Transportation Center Research Report

The objective of this project was to evaluate the performance of Stamark Brand Bisymmetric 1.75 Grade pavement Marking Tape (Series 320) on a large-scale installation on Interstate 24 in McCracken County. The evaluation consisted of periodic inspection of the tape to determine its durability, appearance, and reflectivity.

The tape has demonstrated good performance after two years in service. No durability problems were noted. While the appearance of the tape was not as bright as a typical traffic paint, it was adequate. The tape has maintained a high level of reflectivity. The performance of the material would potentially warrant additional use …

Evaluation Of Flexible Delineator Posts, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The objective of this study was to install a small number of lightweight metal u-channel posts with a round delineator and a small number of commonly used flexible posts and evaluate their performance. Three types of flexible posts were installed. They included two posts manufactured by Carsonite and one manufactured by Safe-Hit.

The results of the limited field tests does not support widespread use of flexible posts. Substantial durability problems were encountered with the flexible posts. Future use of flexible posts should be limited to potential high-hit areas such as gores at urban interchanges. While the durability of the metal …

Long-Term Evaluation Of Durable Lane Delineation Materials, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The objective of this report was to summarize the long-term performance of several types of durable lane delineation materials. Polyester paint was determined to be an effective durable lane material with most use of this material being on asphaltic concrete surfaces having an average daily traffic of under 10,000. Extruded thermoplastic was also determined to be an effective durable lane delineation material with its cost limiting its use to higher volume asphaltic concrete surfaces. Either the hydrocarbon or alkyd thermoplastic formulation could be used but the alkyd formulation was observed to maintain a higher reflectivity. While not classified as a …

Evaluation Of Construction-Zone Pavement Marking Materials, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

The objectives of this study were to evaluate available foil-back and removable tapes as well as one new construction-zone raised pavement marker and to recommend materials that should be included on approved lists for use by the Kentucky Department of Highways. Tapes were placed on transverse test sections and the reflectivity, durability, and appearance were observed.

Tapes to be included on the approved lists for foil-back and removable tapes were recommended. Tapes manufactured by 3M, Flex-0-Lite, and Swarolite were included on the list of acceptable foil-back tapes. Recommended removable tapes were the 3M and Cataphote removable tapes. The Astra Optics …

Evaluation Of Extruded Thermoplastics As Lane Delineation, Kenneth R. Agent, Jerry G. Pigman

Kentucky Transportation Center Research Report

This study involved an evaluation of large-scale installations of both hydrocarbon and alkyd extruded thermoplastics as lane delineation on sections of interstate highways having open-graded surfaces. The objective of the study was to evaluate the performance of thermoplastics as lane delineation and to compare the performance of hydrocarbon versus alkyd formulations.

Data were collected on a periodic basis over an 18-month period. Data collection consisted of daytime observations of the appearance and durability of the thermoplastic material along with reflectivity measurements using a portable retroreflectometer.

The evaluation revealed that both the hydrocarbon and alkyd extruded thermoplastic material maintained their appearance, …