Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Science and Technology Studies

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4831 - 4860 of 5643

Full-Text Articles in Engineering

Impact Of Wind Generator Control Strategies On Flicker Emission In Distribution Networks, Lasantha Meegahapola, Sarath Perera Jan 2012

Impact Of Wind Generator Control Strategies On Flicker Emission In Distribution Networks, Lasantha Meegahapola, Sarath Perera

Faculty of Engineering and Information Sciences - Papers: Part A

Renewable power generators are increasingly being integrated to electricity networks to achieve future renewable energy targets in power generation. In particular, wind power generation has already reported substantial penetration levels in electricity networks. Traditionally, flicker phenomenon is considered to be one of the power quality issues in power distribution networks due to fluctuating consumer loads connected to the network. Large-scale integration of wind power generators may create significant voltage fluctuations in distribution feeders due to stochastic and intermittent nature of the wind resources. This study aims to investigate and characterize the flicker emission under different control strategies for DFIG based …


Estimation In Autoregressive Population Models, Thomas Suesse Jan 2012

Estimation In Autoregressive Population Models, Thomas Suesse

Faculty of Engineering and Information Sciences - Papers: Part A

Autoregressive (AR) models for spatial and social interaction have been proposed by many authors. A sample of units is obtained and the model is applied to this sample. Estimation methods such as the maximum likelihood method (ML) have been employed and investigated in the literature. The main assumption is that a response depends on other responses, when these units interact. Some of those units will be in the sample and some in the non-sample. Therefore the model should apply to the whole population rather to the sample only. Under such a population model, the marginal model for the responses of …


Studying The Impact Of The Corner Propagation Model On Vanet Routing In Urban Environments, Abhinay Mukunthan, Craig Cooper, Farzad Safaei, D. Franklin, Mehran Abolhasan Jan 2012

Studying The Impact Of The Corner Propagation Model On Vanet Routing In Urban Environments, Abhinay Mukunthan, Craig Cooper, Farzad Safaei, D. Franklin, Mehran Abolhasan

Faculty of Engineering and Information Sciences - Papers: Part A

Accurate modelling of the radio channel is often the most difficult aspect of a Vehicular Ad Hoc Network (VANET) simulation due to the large variability present in vehicular terrain. CORNER is a propagation model that calculates path-loss in an urban terrain with a large concentration of buildings, based on the position of the transmitter and receiver on a street map. This paper proposes additions to the CORNER propagation model to take selective multi-path fading into account and investigates the performance of the GPSR routing protocol under the CORNER propagation model in a realistic city environment.


Thermal, Microstructural And Mechanical Coupling Analysis Model For Flatness Change Prediction During Run-Out Table Cooling In Hot Strip Rolling, Xiao-Dong Wang, Fei Li, Zheng-Yi Jiang Jan 2012

Thermal, Microstructural And Mechanical Coupling Analysis Model For Flatness Change Prediction During Run-Out Table Cooling In Hot Strip Rolling, Xiao-Dong Wang, Fei Li, Zheng-Yi Jiang

Faculty of Engineering and Information Sciences - Papers: Part A

Non-uniformity of temperature distribution across strip width direction is the ultimate reason why the flatness defect occurs on the strip after cooling process although the strip is flat at the exit of finishing mill. One thermal, microstructural and mechanical coupling analysis model for predicting flatness change of steel strip during the run-out table cooling process was established using ABAQUS finite element software. K Esaka phase transformation kinetics model was employed to calculate the phase transformation, and coupled with temperature calculation using the user subroutine program HETVAL. Elasto-plasticity constitutive equations of steel material, in which conventional elastic and plastic strains, thermal …


Application Of Multi-Agent System For Preventing Power Interruption In A Large Power System, S R. Islam, Darmawan Sutanto, K M. Muttaqi Jan 2012

Application Of Multi-Agent System For Preventing Power Interruption In A Large Power System, S R. Islam, Darmawan Sutanto, K M. Muttaqi

Faculty of Engineering and Information Sciences - Papers: Part A

This paper presents an emergency control approach for preventing wide spread power interruption using multi-agent system. The proposed control algorithm is based on decentralized architecture of intelligent agents to achieve fast and accurate response when a catastrophic disturbance is identified in the system. By dividing the network into several areas, the voltage instability problem can be localized and countermeasures can be directed to the most affected area by the authorized local agent. This facilitates quick decision making within the system. The effectiveness of the proposed technique has been proved by a simulation of IEEE 57 bus test power system.


Indian Millennials: Are Microchip Implants A More Secure Technology For Identification And Access Control?, Christine Perakslis, Katina Michael Jan 2012

Indian Millennials: Are Microchip Implants A More Secure Technology For Identification And Access Control?, Christine Perakslis, Katina Michael

Faculty of Engineering and Information Sciences - Papers: Part A

This mixed methods study with a sequential explanatory strategy explored qualitatively the statistically significant quantitative findings relative to Indian respondents' perceptions about RFID (radio frequency identification) transponders implanted into the human body. In the first analysis phase of the study, there was a significant chi-square analysis reported (χ2 = 56.64, df = 3, p =.000) relative to the perception of small business owners (N = 453) that implanted chips are a more secure form of identification and/or access control in organizations and the respondents' country of residence. Countries under study included Australia, India, the UK and US. The country contributing …


Characteristics Of Power Quality Disturbance Levels In Australia, Sean Elphick, Vic Smith, Vic Gosbell, Robert Barr Jan 2012

Characteristics Of Power Quality Disturbance Levels In Australia, Sean Elphick, Vic Smith, Vic Gosbell, Robert Barr

Faculty of Engineering and Information Sciences - Papers: Part A

The Australian Long Term Power Quality Survey (LTNPQS) now covers 2,000 sites with a range of different characteristics including strength (related to fault level), line construction and dominant load type. This paper details the latest outcomes of the LTNPQS project in terms of both disturbance levels and reporting methods. A comparison of the differences between voltage, unbalance and harmonic THD levels at strong (close to transformer) and weak (towards the end of LV feeders) sites has been performed and significant differences have been found. A multivariable linear regression study has been undertaken in order to investigate the correlation between site …


A Novel Destination-Based Routing Protocol (Dbrp) In Dtns, Saeid Iranmanesh, Raad Raad, Kwan-Wu Chin Jan 2012

A Novel Destination-Based Routing Protocol (Dbrp) In Dtns, Saeid Iranmanesh, Raad Raad, Kwan-Wu Chin

Faculty of Engineering and Information Sciences - Papers: Part A

In Delay Tolerant Networks (DTNs), the aim of any forwarding/routing protocols is to achieve a high delivery ratio of packets/bundles at the lowest possible bandwidth cost, buffer space and energy. Therefore, finding a protocol which uses less resource to achieve high delivery ratio and low latency is an open research question. This paper proposes a quota-based protocol which confines the number of replicas and forwards them based on the meeting history of nodes. The unique aspect of our protocol is to weight any encounter with the final destination to be much higher than any other node encounter. This aspect of …


Estimation Of Breeding Values For Mean And Dispersion, Their Variance And Correlation Using Double Hierarchical Generalized Linear Models, M Felleki, D Lee, Y Lee, A R. Gilmour, L Ronnegard Jan 2012

Estimation Of Breeding Values For Mean And Dispersion, Their Variance And Correlation Using Double Hierarchical Generalized Linear Models, M Felleki, D Lee, Y Lee, A R. Gilmour, L Ronnegard

Faculty of Engineering and Information Sciences - Papers: Part A

The possibility of breeding for uniform individuals by selecting animals expressing a small response to environment has been studied extensively in animal breeding. Bayesian methods for fitting models with genetic components in the residual variance have been developed for this purpose, but have limitations due to the computational demands. We use the hierarchical (h)-likelihood from the theory of double hierarchical generalized linear models (DHGLM) to derive an estimation algorithm that is computationally feasible for large datasets. Random effects for both the mean and residual variance parts of the model are estimated together with their variance/covariance components. An important feature of …


Sax-Based Decomposition Of Non-Stationary Power Quality Waveforms, M J. Afroni, Darmawan Sutanto, D Stirling Jan 2012

Sax-Based Decomposition Of Non-Stationary Power Quality Waveforms, M J. Afroni, Darmawan Sutanto, D Stirling

Faculty of Engineering and Information Sciences - Papers: Part A

The Hilbert Huang Transform (HHT) is a powerful tool for Power Quality (PQ) classifications. One of the main advantages of the HHT is its ability to analyze non-stationary complex waveforms with very good time resolution. However, like other waveform classification techniques, it has difficulty in resolving the instant of sudden changes in the waveform. To overcome the above problems, SAX (Symbolic Aggregate ApproXimation) method is proposed to convert the signal into symbols which facilitates a pattern detector algorithm to identify the border of the stationary signals within a non-stationary signal. Results from simulations will be provided and discussed. © 2012 …


Towards Modelling Real Time Constraints, Amir Ashamalla, Ghassan Beydoun, Graham Low, Jun Yan Jan 2012

Towards Modelling Real Time Constraints, Amir Ashamalla, Ghassan Beydoun, Graham Low, Jun Yan

Faculty of Engineering and Information Sciences - Papers: Part A

Software agents are highly autonomous, situated and interactive software components. They autonomously sense their environment and respond accordingly. Agents behaviours are often constrained by by real time constraints such as the time in which the agent is expected to respond .i.e. time needed for a task to complete. Failing to meet such a constraint can result in a task being not achieved. This possibly causes an agent or a system to fail, depending on how critical the task is to the agent or system as a whole. Our research aims at identifying and modelling real time constraints in the early …


Sharing Government-Owned Data With The Public: A Cross-Country Analysis Of Open Data Practice In The Middle East, Jazem Mutared Alanazi, Akemi Chatfield Jan 2012

Sharing Government-Owned Data With The Public: A Cross-Country Analysis Of Open Data Practice In The Middle East, Jazem Mutared Alanazi, Akemi Chatfield

Faculty of Engineering and Information Sciences - Papers: Part A

Since 2009, open government policies, open data, and social media use in government have been actively promoted by democratic governments around the world to promote the goals of government transparency, citizen engagement, and collaboration. To date, however, there is a lack of empirical research into open government practice. This knowledge gap has managerial and public policy implications for democratic governments and, importantly, for the governments in the Middle East in which explosive growth has occurred in the number of users of the Internet and social media. This research attempts to reduce this gap by examining the maturity level in open …


Cognitive Processes In Object-Oriented Requirements Engineering Practice: Analogical Reasoning And Mental Modelling, Linda Dawson Jan 2012

Cognitive Processes In Object-Oriented Requirements Engineering Practice: Analogical Reasoning And Mental Modelling, Linda Dawson

Faculty of Engineering and Information Sciences - Papers: Part A

This chapter presents a background in cognitive processes such as problem-solving and analogical reasoning for considering modelling from an object-oriented perspective within the domain of requirements engineering. This chapter then describes a research project and the findings from a set of four cases which examine professional practice from perspective of cognitive modelling for object-oriented requirements engineering. In these studies, it was found that the analysts routinely built models in their minds and refined them before committing them to paper or communicating these models to others. The studies also showed that object-oriented analysts depend on analogical reasoning where they use past …


Very High Data Rate Mb-Ofdm Uwb Systems With Transmit Diversity Techniques, Ngoc Phuc Le, Le Chung Tran, Farzad Safaei Jan 2012

Very High Data Rate Mb-Ofdm Uwb Systems With Transmit Diversity Techniques, Ngoc Phuc Le, Le Chung Tran, Farzad Safaei

Faculty of Engineering and Information Sciences - Papers: Part A

In this paper, the application of space time block codes in a very high data rate multiband-OFDM ultra-wideband (VHDR MB-OFDM UWB) system, where the Modified Dual Carrier Modulation (MDCM) scheme and Low Density Parity Check codes are deployed, is investigated. First, we present a new table-based mapping approach and derive soft-demapping expressions for the MDCM scheme. We then propose a space-time-frequency coded VHDR MB-OFDM UWB system by incorporating space time block codes into the conventional VHDR MB-OFDM UWB system. Numerical simulations of the system supporting a data rate of 1Gbps over the IEEE 802.15.3a channel models are implemented. The simulation …


Robust Distributed Privacy-Preserving Secure Aggregation In Vehicular Communication, Bo Qin, Qianhong Wu, Josep Domingo-Ferrer, Willy Susilo Jan 2012

Robust Distributed Privacy-Preserving Secure Aggregation In Vehicular Communication, Bo Qin, Qianhong Wu, Josep Domingo-Ferrer, Willy Susilo

Faculty of Engineering and Information Sciences - Papers: Part A

Vehicular ad hoc networks (VANETs), formed by computers embedded in vehicles and the traffic infrastructure, are expected to develop in the near future to improve traffic safety and efficiency. To this end, VANETs should be designed to be resistant against various abuses and attacks. In this paper, we first review the existing proposals to provide security, privacy, and data aggregation in vehicle-to-vehicle communication. We then address the fundamental issue of achieving these conflicting properties in a unified solution, having observed that separate efforts cannot fulfill the VANET design objectives. A set of new mechanisms are suggested for efficiently managing identities …


Self-Mixing Interferometry Used For Instrumentations And Measurements(Invited), Silvano Donati, Zhao Wang, Yanguang Yu Jan 2012

Self-Mixing Interferometry Used For Instrumentations And Measurements(Invited), Silvano Donati, Zhao Wang, Yanguang Yu

Faculty of Engineering and Information Sciences - Papers: Part A

This paper reviews the development of a new configuration of interferometry, Self-mixing Interferometry(SMI). SMI is attractive because it doesn't require any optical part external to the laser and can be employed in a variety of measurements, ranging from the traditional measurements related to optical path length like displacements, small-amplitude vibrations, velocity; to sensing of weak optical echoes, like return loss and isolation factor measurements; and also to a special feature for the interaction with the medium, measurements of physical parameters, like laser line width, coherence length, and the alfa factor. Because it is also a coherent detection scheme, the SMI …


The Use Of Transient State Estimation For Voltage Dip/Sag Assessment, A Farzanehrafat, N R. Watson, S Perera Jan 2012

The Use Of Transient State Estimation For Voltage Dip/Sag Assessment, A Farzanehrafat, N R. Watson, S Perera

Faculty of Engineering and Information Sciences - Papers: Part A

Voltage sags are common events on the electric power network caused by network faults and the large load connections. This power quality issue can affect a wide range of electrical equipment malfunctions, interruptions or losses and are of particular concern to industry. A complete knowledge of the source is a prerequisite before any remedial action is taken. On the other hand, it is not feasible to fully monitor voltage sags occurred throughout the network. For this reason state estimation techniques have been extended into power quality issues and called Power Quality State Estimation (PQSE). This paper, introduces the use of …


Wavelet Transform Based De-Noising Method For Self Mixing Interferometry Signals, Yuan Sun, Yanguang Yu, Jiangtao Xi Jan 2012

Wavelet Transform Based De-Noising Method For Self Mixing Interferometry Signals, Yuan Sun, Yanguang Yu, Jiangtao Xi

Faculty of Engineering and Information Sciences - Papers: Part A

Self-mixing interferometry (SMI) signals are observed from a laser diode (LD) with optical feedbacks induced by an external target. SMI signals carry information related to both of the target and parameters of the LDs. However, the noise contained in SMI signals greatly degrades the applications of the SMI systems. This paper proposes a wavelet transform based de-noising method which can effectively eliminate noise while keeping an SMI waveform less changed. The proposed method is verified by both simulations and experiments


Hybrid Frp-Concrete-Steel Double-Skin Tubular Columns: Cyclic Axial Compression Tests, Tao Yu, Yu-Bo Cao, Bing Zhang, J G. Teng Jan 2012

Hybrid Frp-Concrete-Steel Double-Skin Tubular Columns: Cyclic Axial Compression Tests, Tao Yu, Yu-Bo Cao, Bing Zhang, J G. Teng

Faculty of Engineering and Information Sciences - Papers: Part A

Hybrid FRP-concrete-steel double-skin tubular columns (hybrid DSTCs) are a new form of hybrid columns recently developed at The Hong Kong Polytechnic University. A hybrid DSTC consists of an inner steel tube, an outer FRP tube and a concrete infill between the two tubes. Hybrid DSTCs possess many important advantages over existing column forms, including their excellent corrosion resistance and excellent seismic resistance. While a large amount of research has been conducted on the monotonic behavior of this novel form of columns, only a limited amount of work has been conducted on their behavior under cyclic loading. This paper presents the …


Finite Element Analysis Of Debonding Failures In Cfrp-Strengthened Rectangular Steel Tubes Subjected To An End Bearing Load, D Fernando, T Yu, J G. Teng Jan 2012

Finite Element Analysis Of Debonding Failures In Cfrp-Strengthened Rectangular Steel Tubes Subjected To An End Bearing Load, D Fernando, T Yu, J G. Teng

Faculty of Engineering and Information Sciences - Papers: Part A

The end bearing capacity of a rectangular steel tube can be substantially increased through local strengthening by bonding carbon fiber reinforced polymer (CFRP) plates to the webs of the steel tube. Existing studies have revealed that failure of such a strengthened tube generally occurs by debonding of the CFRP plates from the steel tube and the effectiveness of this strengthening method depends significantly on the properties of the adhesive. This paper presents a finite element (FE) study on debonding failures in such CFRP-strengthened rectangular steel tubes subjected to an end bearing load. In the proposed FE model, a bond-slip model …


Experimental Investigation Of A Hydraulically Interconnected Suspension In Vehicle Dynamics And Stability Control, Lifu Wang, Nong Zhang, Haiping Du Jan 2012

Experimental Investigation Of A Hydraulically Interconnected Suspension In Vehicle Dynamics And Stability Control, Lifu Wang, Nong Zhang, Haiping Du

Faculty of Engineering and Information Sciences - Papers: Part A

Mainly motivated by developing cost-effective vehicle anti-roll systems, hydraulically interconnected suspension has been studied in the past decade to replace anti-roll bars. It has been proved theoretically and practically that hydraulic suspensions have superior anti-roll ability over anti-roll bars, and therefore they have achieved commercial success in racing cars and luxury sports utility vehicles (SUVs). However, since vehicle is a highly coupled complex system, it is necessary to investigate/evaluate the hydraulic-suspension-fitted-vehicle's dynamic performance in other aspects, apart from anti-roll ability, such as ride comfort, lateral stability, etc. This paper presents an experimental investigation of a SUV fitted with a hydraulically …


Complementary Techniques For Probing Terahertz Magnetic Excitations In Cu3bi(Seo3)2o2cl, K H. Miller, E Constable, H Berger, D B. Tanner, J Horvat, R A. Lewis Jan 2012

Complementary Techniques For Probing Terahertz Magnetic Excitations In Cu3bi(Seo3)2o2cl, K H. Miller, E Constable, H Berger, D B. Tanner, J Horvat, R A. Lewis

Faculty of Engineering and Information Sciences - Papers: Part A

A low frequency magnetic excitation in Cu3Bi(SeO 3)2O2Cl has been studied through complementary spectroscopic techniques which utilised terahertz radiation from a synchrotron, a mercury arc lamp, and a two-colour photomixing system. The excitation has been studied at temperatures down to 5K and in magnetic fields up to 10T. © 2012 IEEE.


Analysis Of Temperature Field In Liquid-Solid Bimetal Casting Of Laminated Metal Composite, Xingjian Gao, Dongbin Wei, Zhengyi Jiang Jan 2012

Analysis Of Temperature Field In Liquid-Solid Bimetal Casting Of Laminated Metal Composite, Xingjian Gao, Dongbin Wei, Zhengyi Jiang

Faculty of Engineering and Information Sciences - Papers: Part A

In order to improve the low toughness and poor crack resistance of high chromium cast iron (HCCI), the laminated metal composite (LMC) consisting of HCCI and carbon steel has received increasingly attentions in modern industries. Considering that the controllable temperature field at interface of LMC is a key issue in liquid-solid bimetal casting process, a three layered finite element method (FEM) model has been proposed. The influence of parameters including pouring temperature - Tpour, preheating temperature - Tpre and effective volume ratio - VRe on temperature field are discussed. Simulation results show that the temperature at the interface between two …


Non-Uniform Stress Distribution In Frp-Wrapped Circular Concrete Columns Under Uniform Axial Deformation, S Q. Li, J F. Chen, Tao Yu, J G. Teng Jan 2012

Non-Uniform Stress Distribution In Frp-Wrapped Circular Concrete Columns Under Uniform Axial Deformation, S Q. Li, J F. Chen, Tao Yu, J G. Teng

Faculty of Engineering and Information Sciences - Papers: Part A

The confinement of concrete columns using bonded FRP wraps has become a popular retrofit technique. Through extensive research in the last two decades, many stress-strain models have been developed for concrete in FRP-wrapped circular columns. All these models assume that the stress state is axisymmetric in an FRP-wrapped circular concrete column under concentric axial compression. This implies that the FRP wrap is assumed to be axisymmetric in geometry, but in reality such axisymmetry is not realised due to the existence of an overlapping zone. This paper presents a finite element investigation into the stress state in FRP-wrapped circular concrete columns …


Behaviour Of Hybrid Double-Skin Tubular Columns Subjected To Combined Axial Compression And Cyclic Lateral Loading, Bing Zhang, J G. Teng, Tao Yu Jan 2012

Behaviour Of Hybrid Double-Skin Tubular Columns Subjected To Combined Axial Compression And Cyclic Lateral Loading, Bing Zhang, J G. Teng, Tao Yu

Faculty of Engineering and Information Sciences - Papers: Part A

Hybrid FRP-concrete-steel double-skin tubular columns (hybrid DSTCs) are a new form of hybrid columns developed at The Hong Kong Polytechnic University. They consist of an outer tube made of fibre reinforced polymer (FRP) and an inner tube made of steel, with the space between filled with concrete. In these hybrid DSTCs, the three constituent materials are optimally combined to achieve several advantages not available with existing forms of columns, including their superior corrosion and seismic performance. This paper presents the test results of a series of large-scale hybrid DSTCs subjected to combined axial and cyclic lateral loads, with an emphasis …


A Low Cost Soft Mapper For Turbo Equalization With High Order Modulation, Licai Fang, Qinghua Guo, Defeng (David) Huang, Sven Nordholm Jan 2012

A Low Cost Soft Mapper For Turbo Equalization With High Order Modulation, Licai Fang, Qinghua Guo, Defeng (David) Huang, Sven Nordholm

Faculty of Engineering and Information Sciences - Papers: Part A

In an MMSE based turbo equalization system, a soft mapper calculates the symbol mean and variance based on extrinsic Log-Likelihood-Ratios (LLRs) information coming from a Soft-Input Soft-Output (SISO) decoder. In this paper, we investigate the complexity of this module, and in particular, we employ a 3-segment linear approximation approach to calculate the mean and variance of data symbols from LLRs. For FPGA and VLSI implementation, we propose novel piecewise linear functions which map LLR to the mean and variance directly without the use of any two-variable-input multipliers. Simulation results for 16-QAM and 64-QAM show that the no multiplier approach has …


Virtual Worlds And Health: Healthcare Delivery And Simulation Opportunities, David Holloway Jan 2012

Virtual Worlds And Health: Healthcare Delivery And Simulation Opportunities, David Holloway

Faculty of Engineering and Information Sciences - Papers: Part A

With decades of experience in simulation, the health professions are comparatively well versed in virtual environments for training. More broadly, there is a growing body of experience and supporting evidence on the benefits of virtual worlds for professional information sharing, clinical simulation, healthcare delivery, and as a research tool. Virtual worlds have empirically demonstrated outcomes as a simulation tool that increases knowledge and of health professionals, and initial explorations in regard to healthcare delivery show promise. Key challenges for wider adoption of virtual worlds within the health professions include a lack of established standards around privacy, a fragmented approach to …


Key-Based Scrambling For Secure Image Communication, Prashan Premaratne, Malin Premaratne Jan 2012

Key-Based Scrambling For Secure Image Communication, Prashan Premaratne, Malin Premaratne

Faculty of Engineering and Information Sciences - Papers: Part A

Secure image communication is becoming increasingly important due to theft and manipulation of its content. Law enforcement agents may find it increasingly difficult to stay afloat above the ill intentions of hackers. We have been able to develop an image scrambling algorithm that is very simple to implement but almost impossible to breach with a probability less than 5x10− 300. This is possible due to the fact that a user may purchase or acquire rights for an intended image by specifying a 'key' that can form a sequence of numbers 10 to 100 in length. The content provider uses this …


A Sociomaterial Approach To Co-Creating Rfid Value In A Multi-Firm Supply Chain Knowledge Sharing Einvironment: A Longitudinal Case Study, Akemi T. Chatfield, Samuel F. Wamba Jan 2012

A Sociomaterial Approach To Co-Creating Rfid Value In A Multi-Firm Supply Chain Knowledge Sharing Einvironment: A Longitudinal Case Study, Akemi T. Chatfield, Samuel F. Wamba

Faculty of Engineering and Information Sciences - Papers: Part A

Orlikowski and Lacono (2001, p. 132) aptly argue that IT artifacts, particularly distributed network technology applications, including RFID, "do not provide the same material and cultural properties in each local time or context of use." A sociomaterial theory suggests the importance of adopting an integrative approach to study the social and material effects when examining IT benefits realization. While much has been written about the high potential of RFID as a new class of strategic enterprise information systems, the early adopters of RFID and researchers still have to answer the question on how to co-create the business value of RFID …


A Multi-Agent Solution To Distribution System Management By Considering Distributed Generators, Fenghui Ren, Minjie Zhang, Darmawan Sutanto Jan 2012

A Multi-Agent Solution To Distribution System Management By Considering Distributed Generators, Fenghui Ren, Minjie Zhang, Darmawan Sutanto

Faculty of Engineering and Information Sciences - Papers: Part A

A traditional distribution network carries electricity from a central power resource to consumers, and the power dispatch is controlled centrally. Distributed generators (DGs) emerge as an alternative power resource to distribution networks at a smaller and distributed scale, which will bring benefits such as reduced voltage drop and loss. However, because most of high penetration DGs are not utility owned and characterized by high degree of uncertainty such as solar and wind, the distribution network may perform differently from the conventionally expected behaviors. How to dynamically and efficiently manage the power dispatch in a distribution network to balance the supply …