Engineering Commons^™

Additively-Manufactured Hybrid Rocket Consumable Structure For Cubesat Propulsion, Britany L. Chamberlain

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Three-dimensional, additive printing has emerged as an exciting new technology for the design and manufacture of small spacecraft systems. Using 3-D printed thermoplastic materials, hybrid rocket fuel grains can be printed with nearly any cross-sectional shape, and embedded cavities are easily achieved. Applying this technology to print fuel materials directly into a CubeSat frame results in an efficient, cost-effective alternative to existing CubeSat propulsion systems. Different 3-D printed materials and geometries were evaluated for their performance as propellants and as structural elements. Prototype "thrust columns" with embedded fuel ports were printed from a combination of acrylonitrile utadiene styrene (ABS) and …

Micro-Nozzle Simulation And Test For An Electrothermal Plasma Thruster, Tyler J. Croteau

Master's Theses

With an increased demand in Cube Satellite (CubeSat) development for low cost science and exploration missions, a push for the development of micro-propulsion technology has emerged, which seeks to increase CubeSat capabilities for novel mission concepts. One type of micro-propulsion system currently under development, known as Pocket Rocket, is an electrothermal plasma micro-thruster.

Pocket Rocket uses a capacitively coupled plasma, generated by radio-frequency, in order to provide neutral gas heating via ion-neutral collisions within a gas discharge tube. When compared to a cold-gas thruster of similar size, this gas heating mechanism allows Pocket Rocket to increase the exit thermal velocity …

Systems And Methods For Noise Mitigation For Hybrid And Electric Aircraft, Lenny Gartenberg, Richard P. Anderson, Borja Martos

Publications

A system and method of noise mitigation for hybrid and electric aircraft, the aircraft having a controllable pitch propeller or rotor(s) with a plurality of blades. The propeller or rotor(s) are driven by a drive system to provide thrust for the aircraft, and the blades of the propeller or rotor(s) are further movable about pivot axis to vary a pitch thereof. A controller on-board the aircraft is operable to cause rotation or movement of the blades of the propeller or rotor(s) about their pivot axis to alter and/or focus at least one aspect of the propeller generated noise to reduce …

Analytical Modeling Of Heat Deposition In Propellant For Spacecraft Utilizing Nuclear Thermal Propulsion, Alexander Aueron

Von Braun Symposium Student Posters

No abstract provided.

Reducing Hazards Of Propulsive Secondary Payloads By Implementing A Post Launch Pressurization System, Mckynzie Perry

Von Braun Symposium Student Posters

No abstract provided.

Liquid Jet Penetration And Breakup In A Free Supersonic Gas Jet, Hansen Jones

LSU Master's Theses

In the testing of today’s rocket engines, both on large scale vertical test stands and smaller subscale horizontal component testing stands, it is extremely important to be able to accurately quantify and mitigate the thermal and acoustic loads the engines will generate on test stand infrastructure. Due to the large number of parameters that must be considered for many cases, development of a multi-phase computational code is under way to properly analyze and design water spray cooling systems used at NASA’s Stennis Space Center (SSC) and across other NASA centers. As such, a small-scale experiment has been conducted at Louisiana …

Reconstruction Of The 3d Temperature And Species Concentration Spatial Distribution Of A Jet Engine Exhaust Plume Using An Infrared Fourier Transform Spectrometer Hyperspectral Imager, Mason D. Paulec

Theses and Dissertations

The measurement of combustion byproducts is useful for determining pollution of any fuel burning application, efficiency of combustion, and determining detectability of aircraft exhausts. Both intrusive and non-intrusive techniques have been utilized to measure these quantities. For the majority of the non-intrusive techniques, the absorption and emission spectra of the gases are utilized for measurements. For this research, the use of the Telops Infrared Fourier Transform Spectrometer (IFTS) Hyperspectral Imager (HSI) was explored within the scope of combustion diagnostic methods, as an option for remote measurements of a jet turbine to determine concentration of species and temperature of the combustion …

Floating Active Baffles, System And Method Of Slosh Damping Comprising The Same, Dae Won Kim, Rudy L. Baum, Vijay Santhanam, Balaji Sivasubramanian, Sathya Gangadharan

Publications

This disclosure provides a system for damping slosh of a liquid within a tank, a baffle for use in the system, and a method of damping slosh using the system. The system includes a plurality of baffles. Each baffle has a body configured to substantially float upon the liquid. Each baffle also has an activation material received along at least a portion of the body. The activation material is magnetically reactive provided in a quantity sufficient to enable the body to be manipulated in the presence of a magnetic field (M). The system further includes an actuator configured to pro­vide …

Investigation Of A Pressure Wave Supercharger For An Industrial Diesel Engine, Brian A. Beasley

Theses and Dissertations

Internal combustion engines suffer from decreased performance as altitude is in- creased. This performance decrease can be overcome by increasing the pressure in the engine's intake manifold. Typically, this is accomplished with a turbocharger or supercharger. However, mechanical compression devices such as these suffer from decrease compression efficiency as the size of the device decreases. The size of the compression device scales with the amount of mass ow through the device, and the amount of mass ow is proportional to the size of the engine. This means a small turbocharger for a small engine is less efficient than a larger …

Application Of Spectral Solution And Neural Network Techniques In Plasma Modeling For Electric Propulsion, Joseph R. Whitman

Theses and Dissertations

A solver for Poisson's equation was developed using the Radix-2 FFT method first invented by Carl Friedrich Gauss. Its performance was characterized using simulated data and identical boundary conditions to those found in a Hall Effect Thruster. The characterization showed errors below machine-zero with noise-free data, and above 20% noise-to-signal strength, the error increased linearly with the noise. This solver can be implemented into AFRL's plasma simulator, the Thermophysics Universal Research Framework (TURF) and used to quickly and accurately compute the electric field based on charge distributions. The validity of a machine learning approach and data-based complex system modeling approach …

Clean-Fuel E-Vtol Air Mobility Vehicles For Unmanned And Manned Operations, Larry D. Mccarroll, Brian Morrison, Bruce J. Holmes D.E., Faiaa, Fraes, Henry Vu

National Training Aircraft Symposium (NTAS)

Imagine for a moment, having your very own safe, affordable, clean-fuel, point-to-any point vehicle for travel in the 21st-century 3-dimensional airspace system. Your ultra-reliable e-VTOL allows commuters to leave behind the constraints of hub-and-spoke airports, and the congestion of interstates, turnpikes and freeways. Facilitating Inter- and Intra-urban travel, such as downtown-to-airport, or metropolis-to-metropolis, or home-to-work. Perfect for dense urban environments worldwide. And all while offering the clean power of hydrogen for zero-emission travel.

This vision for efficient, clean, delay-free mobility has been talked about for decades, but always waived aside as some kind of futurist vision. This future requires tackling …

Experimental Evaluation Of A Krypton Propellant Arrangement In A T-100-3 Hall-Effect Thruster, Adam Patel, Javier Cortina Fernandez, Justin Chow, Osvaldo Alejandro Martin, Alexey Shashurin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Stationary Hall thrusters are electric, moderate-specific impulse propulsion systems developed in Russia. These devices manipulate electric and magnetic fields to expel ionized gas (plasma) components, resulting in thrust. The success of Hall-effect engines in USSR satellite-transfer missions quickly sparked western interest in the design. Extensive government and academic study commenced shortly after the dissolution of the Soviet Union, when the technology was made available to the United States. The common SPT-100 model was the primary subject of such studies. Unfortunately, limited literature exists for rare and uncommon Hall thruster models. The T-100-3 stationary plasma thruster suffers from this gap; few …

Experiments Of Propeller-Induced Flow Effects On A Low-Reynolds-Number Wing, Gavin K. Ananda, Robert Deters, Michael S. Selig

Publications

Novel findings are discussed in this paper that will be especially beneficial to designers and modelers of small-scale unmanned air vehicles and high-altitude long-endurance vehicles that both operate at low Reynolds numbers (Re = 50,000-300,000). Propeller-induced Oow effects in both tractor and pusher configurations on a recta ngular wing using the Wortmann FX 63-137 airfoil (a common low-Reynolds-number high-lift airfoil) are presented in this paper . Significant performance benefits can be found for a wing in the tractor configuration. Experiments, including trip tests and upper-surface oil Dow visualization, show and verify that the propeller slipstream induces early transition to turbulent …

Fuel Flow Reduction Impact Analysis Of Drag Reducing Film Applied To Aircraft Wings, Damon Resnick, Chris Donlan, Nimish Sakalle, Cody Pinkerman

SMU Data Science Review

In this paper, we present an analysis of flight data in order to determine whether the application of the Edge Aerodynamix Conformal Vortex Generator (CVG), applied to the wings of aircraft, reduces fuel flow during cruising conditions of flight. The CVG is a special treatment and film applied to the wings of an aircraft to protect the wings and reduce the non-laminar flow of air around the wings during flight. It is thought that by reducing the non-laminar flow or vortices around and directly behind the wings that an aircraft will move more smoothly through the air and provide a …

Thermal Modelling And Validation Of Heat Profiles In An Rf Plasma Micro-Thruster, Alec Sean Henken

Master's Theses

The need and demand for propulsion devices on nanosatellites has grown over the last decade due to interest in expanding nanosatellite mission abilities, such as attitude control, station-keeping, and collision avoidance. One potential micro-propulsion device suitable for nanosatellites is an electrothermal plasma thruster called Pocket Rocket. Pocket Rocket is a low-power, low-cost propulsion platform specifically designed for use in nanosatellites such as CubeSats. Due to difficulties associated with integrating propulsion devices onto spacecraft such as volume constraints and heat dissipation limitations, a characterization of the heat generation and heat transfer properties of Pocket Rocket is necessary. Several heat-transfer models of …

Electrode Geometry Effects In An Electrothermal Plasma Microthruster, Harrison Raymond King

Master's Theses

Nanosatellites, such as Cubesats, are a rapidly growing sector of the space industry. Their popularity stems from their low development cost, short development cycle, and the widespread availability of COTS subsystems. Budget-conscious spacecraft designers are working to expand the range of missions that can be accomplished with nanosatellites, and a key area of development fueling this expansion is the creation of micropropulsion systems. One such system, originally developed at the Australian National University (ANU), is an electrothermal plasma thruster known as Pocket Rocket (PR). This device heats neutral propellant gas by exposing it to a Capacitively Coupled Plasma (CCP), then …

Development Of Digital Diary For Enhanced Parental School Involvement In Tanzania, Sekione R. Jeremiah, Joel S. Mtebe Phd

The African Journal of Information Systems

The study examined the use of digital diary as a tool for enhancing parental school involvement in Tanzania. The development of the digital diary followed eXtreme Programming agile method where 87 parents and 6 teachers from St. Florence school were involved. Parents and teachers were given six months to use the tool before testing for its effectiveness using data from 7 teachers and 156 parents through semi-structured interviews and questionnaires respectively. The study found that the majority of respondents (84.4% of parents and 96.7% of teachers) indicated that the digital diary was useful tool as enabled them to track children’s …

Propulsive Battery Packs Sizing For Aviation Applications, Tianyuan Zhao

Doctoral Dissertations and Master's Theses

This thesis derives analytical methods for sizing the propulsive battery packs for designing an electric-driven aircraft. Lithium-Ion (Li-Ion) battery is the primary choice of battery cell chemistry in this thesis research due to its superior specific energy and market availability. The characteristics of Lithium-Ion battery cells are first determined and studied using experimental test results and manufacturers published data. Based on the design requirement to the battery system, the battery sizing will fall into one of the two sizing categories. The first category is power sizing, which requires the battery’s ability to deliver full power demanded by the electric motor. …

Depot For Martian And Extraterrestrial Transport Resupply (Demetr), Emily Beckman, Ethan Vogel, Caleb Peck, Nicholas Patterson

Chancellor’s Honors Program Projects

No abstract provided.

Algal Biofuel: The Future Of Green Jet Fuel In Air Transportation, Rajee Olaganathan

Publications

The aviation industry is one of the major contributors for the greenhouse gases. As air travel has become inevitable in this modern era, and fossil fuel usage is not sustainable, it is essential to produce renewable fuel and commercialize it to reduce the greenhouse gas emissions. In order to produce an alternate aviation biofuel a lot of industrial and academic collaborations have been developed worldwide. The main concern of this collaborative research is to produce aviation biofuel from renewable resources with low environmental impacts, and which is sustainable at an economically viable price. This mini-review briefly discusses the biotechnological approaches …

Laser Ablation Synthesis Of Energetic Graphitic Coated Aluminum Nanoparticles, Camille E. Bergin

EURēCA: Exhibition of Undergraduate Research and Creative Achievement

This poster presents a research initiative in collaboration with the US Army Research Lab (ARL) to synthesize carbon-coated aluminum (Al) nanoparticles (NPs) as energetic materials via laser ablation in organic solutions. Nanomaterials have gained widespread attention recently from an array of scientists and engineers for their desired physical and chemical properties believed to be a product of their high ratio of surface area to volume, thus making them favorable for a wide variety of applications. Specifically, here Al NPs are favored for their energetic characteristics and usually employed as solid-state propellants. However, it is challenging and unsafe to preserve pristine …

Pseudo Linear Hall Effect Thruster Characterization Through Potential, Magnetic, And Optical Measurements, Braeden A. Sheets

Theses and Dissertations

Electric propulsion systems are a more mass efficient method for providing a change in velocity, ΔV, to on-orbit spacecraft, than their chemical counterparts. In comparison, electric systems generally have a much higher specific impulse, Isp, than chemical systems. One option within the realm of electric propulsion is Hall Effect Thrusters, which have moderately high specific impulse values. From their advent in the 1960s, Hall Effect Thrusters have been used for orbit station keeping, attitude control, and orbit transfer. Although the discharge cavity is conventionally circular, pseudo-linear or racetrack shaped cavities have been developed. Even though Hall thrusters have decades of …

Design, Buildup, And Testing Of A Radial Rotating Detonation Engine For A Compact Auxiliary Power Unit, Riley Huff

Theses and Dissertations

Current power generators consume a large portion of the aircrafts usable volume and they are also extremely heavy for the amount of power that they can produce. Therefore, a need for compact, lightweight Auxiliary Power Units (APU) with high power density has arisen. A novel solution to this problem comes in the form of coupling a Rotating Detonation Engine (RDE) with a turbine generator. A new type of RDE referred to as the Radial Rotating Detonation Engine (RRDE) has been developed to fill this need. This project marks the first radial ow RDE successfully operated in the United States, and …

Characterization And Analysis Of Plasma Instabilities In A 600 W Permanent Magnet Hall Thruster, Samuel D. Wright

Theses and Dissertations

Electric propulsion is an important technology for the future of space operations and exploration. Within the range of electric propulsion devices, Hall Effect Thrusters provide a balance of thrust and specific impulse well-suited for many Earth-centric missions. Hall Effect Thrusters have been studied since their development in the 1960s and have been flown on hundreds of spacecraft, but the intimate details of the plasma behavior within the thruster exhaust plume are still not well understood. Furthering this knowledge may be key to improving thruster design to yield better performance and longer lifetimes. To this end, experiments were conducted to measure …

Analysis Of Additively Manufactured Injectors For Rotating Detonation Engines, Michael C. Waters

Theses and Dissertations

This research represents an experimental and computational analysis of additively manufactured injectors for Rotating Detonation Engines (RDEs) for use in rocket propulsion. This research was based on the manufacture and testing of existing injector element designs using additive techniques. The designs were modeled from geometries gathered from Sutton and Biblarz Elements of Rocket Propulsion [23]. The goal of this research was to characterize the viscous losses of each design based on the discharge coefficient. The designs were computationally simulated to gain insight to the flow characteristics using multiple sets of conditions for surface roughness and inlet pressure. The results were …

Internet Enabled Remote Driving Of A Combat Hybrid Electric Power System For Duty Cycle Measurement, Jarrett Goodell, Marc Compere, Wilford Smith, Mark Brudnak, Mike Pozolo, Et Al.

Marc Compere

This paper describes a human-in-the-loop motion-based simulator interfaced to hybrid-electric power system hardware, both of which were used to measure the duty cycle of a combat vehicle in a virtual simulation environment. The project discussed is a greatly expanded follow-on to the experiment published in [1,7]. This paper is written in the context of [1,7] and therefore highlights the enhancements. The most prominent of these enhancements is the integration (in real-time) of the Power & Energy System Integration Lab (P&E SIL) with a motion base simulator by means of a “long haul” connection over the Internet (a geographical distance of …

An Airplane-Helicopter Hybrid Called Racer Is A New Convertiplane Design From Airbus, Nihad E. Daidzic

Aviation Department Publications

Airbus recently unveiled an airplane-hybrid design named Rapid and Cost Efficient Rotorcraft (RACER)...I'll explore the aerodynamics that make such a design possible.

Unmanned Aerial Systems: Research, Development, Education & Training At Embry-Riddle Aeronautical University, Michael P. Hickey

Publications

With technological breakthroughs in miniaturized aircraft-related components, including but not limited to communications, computer systems and sensors, state-of-the-art unmanned aerial systems (UAS) have become a reality. This fast-growing industry is anticipating and responding to a myriad of societal applications that will provide new and more cost-effective solutions that previous technologies could not, or will replace activities that involved humans in flight with associated risks.

Embry-Riddle Aeronautical University has a long history of aviation-related research and education, and is heavily engaged in UAS activities. This document provides a summary of these activities, and is divided into two parts. The first part …

Take-Off Characteristics For Naca 4612 Aerofoil In A Twin-Wing Configuration With Optimum Angles Of Attack, Elena Vishnevskaya, Kenneth L. Witcher, Ian R. Mcandrew

Publications

Unmanned Aerial Vehicles are used generally at low levels and speeds. The research reported in this article investigates the possible use of twin-wing designs for higher altitudes with a focus on the possible lift capable for either short runways or high payloads. The wing aerofoil and unique Angles of Attack, AoA, are set 5o on the upper wing and 10o on the lower. There is a positive upper wing stagger of 50% of the chord length at height separation of 1 chord. These parameters have been established from previous research and this research investigates how they generate lift at take-off …

Investigation Of The Onset Of Cavitation In Additively Manufactured Venturis, Erik Korzon

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.