Engineering Commons^™

Analysis Of Indentation Loading Of Cortical Bone Using Acoustic Emission Techniques, Ashkan Safari, Ger Reilly, Brendan Mccormack

Conference Papers

In this study, we recorded the number of Acoustic emission (AE) hits and related AE energy during indentation fracture of cortical bone using a PAC PCI-2 card and pico sensor. A threshold value of 43dB was used to filter premature trigger due to background noise. Registered AE hits had more than one count (threshold crossing). Amplifier gain was set at 40dB with a (0.1-1) MHz band pass filter. 8mm cubes of cortical bones were indented in the longitudinal direction at constant crosshead speed of 1 mm min-1 using a large 2D, 50˚ wedge indenter. We hypothesised that signals occurring as …

Bayer Ag V. Housey Pharmaceuticals: Protection For Biotechnological Research Tools Under Section 271(G) Found Wanting, Matthew Barthalow

The University of New Hampshire Law Review

[Excerpt] "Research tools, a subset of biotechnological inventions protected by process patents, are “tools that scientists use in the laboratory, including cell lines, monoclonal antibodies, reagents, animal models, growth factors, combinatorial chemistry and DNA libraries, clones and cloning tools (such as PCR), methods, laboratory equipment and machines.” Many companies base their business models on the ability to find pharmaceutical products using their proprietary drug discovery research tools. Research tools used for drug discovery ‘include bioinformatic methods for identifying the interaction of certain proteins and their association with disease, methods for confirming protein targets, screening assays to identify molecules active against …

Green Engineering And Gate-To Gate Life Cycle Assessments For Pharmaceutical Products, Daniel Fichana

Theses and Dissertations

The research of this thesis focused on the environmental and processing metrics during the development of two different drugs. Previous research in life cycle assessments and green engineering have focused on other products and processes, but only a limited amount of studies have been conducted for pharmaceutical applications. This analysis concerned a gate-to-gate analysis of two distinct pharmaceutical products along with the development of a solvent selection table. The goal of this research was to determine how various processing and environmental metrics were affected by process improvements.

The first drug was the pravastatin, which was made via a fermentation route. …

Ricketts And Steiner Analysis Using Newtom 3g™ Scout Images, James I. Gibson Iii

Loma Linda University Electronic Theses, Dissertations & Projects

NewTom 3G™ scout images have the general appearance of traditional lateral cephalometric radiographs. The purpose of this research was to determine if Ricketts and Steiner analyses could be accomplished on NewTom 3G™ scout images.

This was a retrospective study comparing the use of NewTom 3G™ scans in DICOM (Digital Imaging and Communications in Medicine) format to scout images from 25 consecutive patients of the Loma Linda University School of Dentistry Department of Orthodontics, three of these patients did not meet the inclusion criteria. The DICOM images were used to create controls. The controls and scout images were digitized using QuickCeph™. …

Dynamic Determinants Of Incisal Display, Shawn Paul Pesh

Loma Linda University Electronic Theses, Dissertations & Projects

The principal objective of this study was to use computer aided design (CAD) to better illustrate and quantify the relationship of mandibular arch depth, mandibular arch width, overbite, and overjet in the presence of mandibular dental crowding. To date, there has been no research examining how changes in the mandibular arch limit the orthodontist's ability to control overbite and overjet. Understanding how to effectively manage overbite and overjet are crucial to the clinician's ability to manipulate incisal display. Polyvinyl siloxane impressions of both maxillary and mandibular arches of a Caucasian patient were taken and used to pour dental stone models. …

2005 Scholars And Artists Bibliography, Stephen D. Slane Dr., Michael Schwartz Library, Cleveland State University, Friends Of The Michael Schwartz Library

Scholars and Artists Bibliographies

This bibliography was created for the annual Friends of the Michael Schwartz Library Scholars and Artists Reception, recognizing scholarly and creative achievements of Cleveland State University faculty, staff and emeriti. Dr, Steve Slane was the guest speaker.

Santa Clara Magazine, Volume 47 Number 2, Fall 2005, Santa Clara University

Santa Clara Magazine

6 - THE DRIVE TO CREATE by Elizabeth Kelley Gillogly '93. Albert Hoagland, an adjunct professor at SCU for more than 20 years, helped to build the first disk drive. Now is he working to preserve the history of magnetic disk storage.

10 - UNFINISHED MESSAGE by Toshio Mori. We share an excerpt from a collection of short stories by Mori, whose work highlights the plight of Japanese immigrants in the U.S. during World War II. The book is a part of the California Legacy Series, a partnership between SCU and Heyday Books.

14 - THE FAMILIAR STRANGER By Cynthia …

Application Of Polyelectrolyte Layer-By-Layer Nano-Assembly For Surface Modification, Encapsulation And Controlled Release, Nikhil Anil Pargaonkar

Doctoral Dissertations

In this study, we applied the traditional Electrostatic layer-by-layer (ELBL) assembly procedure to fabricate nanothin films over flat surfaces, and modify particle surfaces to influence the drug particle size, and drug release. The ELBL assembly has previously been applied to fabricate multilayer nano-scale thin films, but its ability to instantaneously influencing particle size is unique. Other unique observations such as influence on drug release as a result of polymer complexation, and thermal changes occurring during layer fabrication are recorded.

The ELBL self-assembly process was applied to produce dexamethasone particles layered with various polyelectrolyte layer combinations. These combinations were further applied …

Detection Of Microcracks During Bone Cutting Using Acoustic Emission Techniques, Ashkan Safari, Ger Reilly, Brendan Mccormack

Conference Papers

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during operative procedures. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occurring with continued loading; microcracking acts as a stimulus for main crack formation and has also been shown to occur during the propagation of the main crack. It has also been reported that Acoustic Emission (AE) is generated due to microcrack formation and crack growth, prior to, and during final fracture in …

An Experimental Technique For Measurement Of Heat Generated During Bone Sawing, Hamid Khalili Parsa, Ger Reilly, Brendan Mccormack

Conference Papers

Orthopaedic bone cutting processes such as osteotomy and hip arthroplasty involve the cutting of one with the aid of various manual and powered cutting instruments including manual and powered bone saws. The extent of surgically induced bone necrosis at the point of the cutting tool and the bone is mainly due to the frictional heat generated by bone cutting. Bone necrosis has an impact on bone regeneration, and the rate of healing of the bone post operation. The threshold temperature for impaired regeneration of bone is in the range of 44°C to 47°C. Overheating also affects the sharpness life of …

Contrast-Detail Analysis Characterizing Diffuse Optical Fluorescence Tomography Image Reconstruction, Scott C. Davis, Brian W. Pogue, Hamid Dehghani, Keith D. Paulsen

Dartmouth Scholarship

Contrast-detail analysis is used to evaluate the imaging performance of diffuse optical fluorescence tomography (DOFT), characterizing spatial resolution limits, signal-to-noise limits, and the trade-off between object contrast and size. Reconstructed images of fluorescence yield from simulated noisy data were used to determine the contrast-to-noise ratio (CNR). A threshold of CNR=3 was used to approximate a lowest acceptable noise level in the image, as a surrogate measure for human detection of objects. For objects 0.5 cm inside the edge of a simulated tissue region, the smallest diameter that met this criteria was approximately 1.7 mm, regardless of contrast level, and test …

Laser And Led Effects On The Proliferation Rate Of Periodontal Ligament Fibroblasts, Allen J. Job

Loma Linda University Electronic Theses, Dissertations & Projects

PURPOSE: To compare the effectiveness of a Gallium Aluminum Arsenide (GaAlAs) diode laser and a light emitting diode (LED) on periodontal ligament fibroblast cell proliferative rates.

METHODS and MATERIALS: PDLF obtained from freshly extracted permanent teeth were cultured under standard conditions until a subconfluent monolayer was present. The next section took 5 days to complete. On day 1, the initial cell concentration of 700 uL/cm² was plated on 96-well assay plates and placed in a CO₂ incubator at 37° C for 24 hours. On day 2, cell counts were first verified using hemocytometry then were irradiated using an …

Sequential Labelling And Acoustic Emission Analysis Of Damage Occurring In Cortical Bone During Indentation Cutting, Ger Reilly, Ashkan Safari, David Taylor, Brendan Mccormack

Conference Papers

When a surgeon uses a wedge shaped blade or an osteotome to cut cortical bone during an operative procedure the bone will fail by a process of microcracking and primary crack propagation. It has previously been observed that crack propagation is dependent on the direction of cutting relative to the main axis of the bone. It has also been observed that microcracks occurring during fracture release acoustic signals that facilitate real-time monitoring of a cutting process. In these novel studies, we labelled damage accumulation during cutting of cortical bone using sequential chelating dyes and we correlated recorded AE signals during …

Santa Clara Magazine, Volume 47 Number 1, Summer 2005, Santa Clara University

Santa Clara Magazine

9 - A MOGUL IN THE MAKING By Larry Sokoloff J.D. '92 While working toward his business degree, SCU sophomore Tyler Dickman runs a multimillion-dollar business based in Florida.

10 - TOP OF THE CLASS: FOUNDATION HONORS INNOVATIVE SCU PROFESSORS By Kim Kooyers. This year's winners of the Louis and Dorina Brutocao Award for Teaching Excellence and the Brutocao Family Foundation Award for Curriculum Innovation are examples of the SCU's outstanding teaching scholars.

14 - A GLOBAL ETHIC: A CONVERSATION WITH HANS KUNG By Rita Beamish '74 Hans Kung, scholar, Roman Catholic priest, and author of some 50 books on …

Flight Physician - July, 2005, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A sixteen page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Organization And Signal Processing Of The Descending Tracts In The Cervical Spinal Cord, Yanmei Tie

Doctoral Dissertations

This dissertation addresses the research for the development of spinal cord-computer interface (SCCI). The main objective of SCCI is to generate voluntary motor control signals for individuals with spinal cord injury (SCI).

In the neuroscience aspect, organization of the fibers in the descending tracts of the dorsolateral funiculus of the cervical spinal cord was investigated in cats. The spinal cord was penetrated with silicon substrate microelectrodes at 400 μm intervals in the medio-lateral direction at the C5/C6 and C6/C7 segmental borders. The stimulus consisted of a 20 ms train of charge-balanced biphasic pulses at 330 Hz. The evoked activities from …

Dynamic Matrix Composition In Engineered Cartilage With Stochastic Supplementation Of Growth Factors, Asit K. Saha, J. (Jagannath) Mazumdar, Sean S. Kohles

Mechanical and Materials Engineering Faculty Publications and Presentations

Dynamic extracellular matrix (ECM) synthesis is explored in a hypothesized engineered cartilage construct. Growth (α) and decay (β) rate parameters are developed from a previous engineered cartilage model. The presented mathematical model was constructed from the parameterized experimental data using a deterministic and stochastic examination of ECM synthesis based on a negative feedback control mechanism. A growth factor supplementation is incorporated in a probabilistic mathematical approach. The growth factor component modified an initial deterministic model through a Gaussian white noise fluctuation. As the primary constituents of ECM, the mathematical tool is intended to characterize the probable steady state distribution of …

2005 - The Tenth Annual Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Tenth Annual Symposium of Student Scholars, held on April 8, 2005. Includes abstracts from the presentations and posters.

Santa Clara Magazine, Volume 46 Number 4, Spring 2005, Santa Clara University

Santa Clara Magazine

8 - 'AN EXTRAORDINARY EVENT' By Elizabeth Kelley Gillogly '93. SCU Music Professor Hans Boepple is a gifted pianist and dedicated teacher.

10 - EMBRACING DIFFERENCES By Adam Breen. Senior Aaron Uchikura spent a summer helping children in Moscow orphanages.

12 - THE KOKO CONNECTION By Victoria Hendel De La O. Senior Tierra Wilson's perseverance landed her a job as a gorilla research assistant and caregiver.

16 - A ROTATION IN ETHICS By Rita Beamish '74. Students learn about the ethics of health care by shadowing doctors and nurses at O'Connor Hospital in San Jose.

Automated Migration Analysis Based On Cell Texture: Method & Reliability, Jianfeng Qin, Thomas W. Chittenden, Ling Gao, Justin D D. Pearlman

Dartmouth Scholarship

Background: In this paper, we present and validate a way to measure automatically the extent of cell migration based on automated examination of a series of digital photographs. It was designed specifically to identify the impact of Second Hand Smoke (SHS) on endothelial cell migration but has broader applications. The analysis has two stages: (1) preprocessing of image texture, and (2) migration analysis.

Results: The output is a graphic overlay that indicates the front lines of cell migration superimposed on each original image, with automated reporting of the distance traversed vs. time. Expert preference compares to manual placement of leading …

Flight Physician - March, 2005, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A twenty page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

What Communities Should Do Pre-Event To Support Public Health Post-Event Assessments, Surveillance And Monitoring, Thomas Lyons Carr Iii

Thomas Lyons (Thom) Carr III Appl.Sc., CEM

[Abstract written March 2008, TLC] Under worst-case planning assumptions used by some major metropolitan areas, a Neighbor-to-Neighbor self-help program model is the primary link between citizens and the professional response personnel of the responsible government agencies.

In the Neighbor-to-Neighbor self-help program model or a Community Emergency Management Plan (CEMP) calls on the citizens in neighborhoods to identify and establish cluster emergency preparedness committees, Cluster Emergency Coordination Centers (CECC) and Community Emergency Response Teams (CERT). Missing from these plans or what is not articulated is how constant Public Health Post-Event Surveillance, Monitoring and Assessments will be done. Given the worst-case planning …

An Investigation Of The Heat Affected Zone In Cortical Bone Sawing, Hamid Khalili Parsa, Ger Reilly, Brendan Mccormack, Andrew Macey

Conference Papers

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone and increased cutting forces (Ark et al, 1997). Overheating in localised areas can cause bone necrosis and have an impact on the rate of healing of the bone post operation and overheating also affects the sharpness life of the blade. A review of the literature indicates that work has …

Design Of A Wireless System For Patient-Hospital Communication And Result Validation In Point Of Care Testing, John Mcgrory, Owen Lynch, Eugene Coyle

Conference Papers

This paper discuses mobile phone (cell phone) and wireless applications for linking patients who manage their healthcare outside the hospital using Point of Care Testing (POCT) to hospital information systems (HIS). Certain medical conditions require patients to manage their healthcare by performing on themselves POC testing and act faithfully on the result. This raises quality control issue, as these POC samples and testing procedures are not independently overseen by professional hospital staff. In hospitals, samples taken by clinicians are validated by hi-tech computerised validation systems to ensure plausibility, before physicians rely on them. Patients in the home must often use …

Robot Assisted Ultrasound Imaged Guided Interstitial Lung Brachytherapy In A Porcine Model, Richard A. Malthaner, Edward Yu, Jerry J. Battista, Chris Blake, Donal Downey, Aaron Fenster

Oncology Presentations

We set out to see if permanent interstitial brachytherapy seeds could be safely and reproducibly inserted thoracoscopicaly with the ZEUS Robotic system and intraoperative ultrasound into in-vivo porcine lungs.

Use Of Calcium Hypochlorite As A Sanitizer For Seeds Used For Sprouting: Task #2; Impact: Improved Alfalfa Decontamination Technologies, Emily Damron, Carrie Klein, Melissa Leach, Jordan Mourot, Tom Murphy, Amy Seamans, Ryan Wilson

Inquiry: The University of Arkansas Undergraduate Research Journal

Consumption of raw or lightly cooked alfalfa sprouts has been a concern of the U.S. Food and Drug Administration (FDA) in recent years due to connections between sprouts and foodborne illnesses. Researchers have identified, contaminated seeds as the primary source of alfalfa sprouts contamination. Contamination of alfalfa seeds can originate in the field, harvesting, storing, or sprouting. Two pathogens of particular concern on alfalfa seeds are Escherichia coli 0157:H7 (E. coli) and Salmonella. These pathogens are capable of producing biofilms that provide protection for individual cells and allow for survival in otherwise hostile environments, including some disinfectant washes. Other factors …

Relación Entre Ambliopía Refractiva Media Y Alta Y Grado De Estereopsis Medida Con El Test De Randot, Luisa Fernanda Figueroa Olarte, Magda Corredor, Lisley Cortés

Ciencia y Tecnología para la Salud Visual y Ocular

Se realizó un estudio descriptivo para determinar el grado de estereopsis por medio del test de Randot en una muestra de pacientes entre 5 y 12 años con ambliopía refractiva media y alta que fueron atendidos en el Instituto de Investigaciones Optométricas IIO de la Universidad de La Salle, además para probar la hipótesis se realizó una revisión retrospectiva de historias de pacientes que asistieron a las unidades de ortóptica y pediatría del I.I.O., entre los años 2002 y 2004. Para fines de la investigación se utilizarán dos herramientas estadísticas: prueba de Hipótesis y Regresión Lineal. Para realizar el contraste …

Influencia De La Prismación En El Postoperatorio De Exotropias Intermitentes En Niños De 2 A 11 Años De Edad, Neida Esperanza Ronderos E., Alfonso Galvis

Ciencia y Tecnología para la Salud Visual y Ocular

Se realizó un estudio prospectivo en niños de 2 a 11 años de edad, examinados en el Departamento de Oftalmología de la Clínica Colsubsidio entre el 1 de abril de 2004 y el 1 de abril de 2005, con exotropias intermitentes primarias entre 20 y 40 dioptrías prismáticas. Como criterio de inclusión se tuvo en cuenta, la edad, el ángulo de la desviación, que no presentaran ambliopía ni síndromes alfabéticos asociados; se excluyeron las exotropias secundarias y pacientes intervenidos con cirugía previamente. El propósito del estudio fue comparar la influencia de la prismación en el preoperatorio y su efecto en …

Citología De Impresión Una Técnica Novedosa Y Sencilla Para El Diagnostico De Alteraciones De La Superficie Ocular, Martha Fabiola Rodríguez A., Patricia Hernández Rodríguez

Ciencia y Tecnología para la Salud Visual y Ocular

El presente artículo es una revisión de la técnica de citología de impresión como herramienta diagnóstica para las alteraciones de la superficie ocular. Se han utilizado un amplio rango de técnicas adaptadas a la citología de impresión de conjuntiva y cornea, como son: diferentes coloraciones para observar las muestras en microscopio óptico, microscopia electrónica, inmunofluorescencia, inmunohistoquimica, reacción en cadena de la polimerasa (PCR) y citometría de flujo. Actualmente, esta técnica es muy utilizada como una alternativa no invasiva para obtener «biopsias» muy delgadas y células epiteliales de la superficie ocular, especialmente porque no presenta efectos colaterales o contraindicaciones. Ha sido …

The Journal Of Undergraduate Research: Volume 03

The Journal of Undergraduate Research

This is the complete issue of the South Dakota State University Journal of Undergraduate Research, Volume 3.