Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Anemometry (1)
- CORRUGATED AIRFOIL (1)
- Carbon Fiber (1)
- Carbon Materials (1)
- Channel flow (1)
-
- Configurators (1)
- Containment (1)
- CubeLabs Modules (1)
- DRAGONFLY (1)
- Environmental Conditioning (1)
- High-Temperature (1)
- Hot-wire (1)
- Inflatable Wings (1)
- Inner-peak value (1)
- International Space Station (1)
- LOW REYNOLDS NUMBER (1)
- Long Term Storage (1)
- MICRO AIR VEHICLES (MAV’s) (1)
- Mass customization (1)
- Microfabrication (1)
- Microfluidics (1)
- Microgravity (1)
- Microstructures (1)
- NanoRacks Platform (1)
- Nanoindentation (1)
- Nanoindentation; Interfacial thickness; Polymer interfaces; Finite element method (1)
- Optimization (1)
- PITCH AND PLUNGE (1)
- Packing (1)
- Perch Landing; Micro Aerial Vehicle; Neighboring Optimal Control; Wing Rotation; Unsteady Aerodynamics (1)
Articles 1 - 10 of 10
Full-Text Articles in Engineering
High Speed Continuous Thermal Curing Microfabrication System, Franklin Dibartolomeo
High Speed Continuous Thermal Curing Microfabrication System, Franklin Dibartolomeo
University of Kentucky Master's Theses
Rapid creation of devices with microscale features is a vital step in the commercialization of a wide variety of technologies, such as microfluidics, fuel cells and self-healing materials. The current standard for creating many of these microstructured devices utilizes the inexpensive, flexible material poly-dimethylsiloxane (PDMS) to replicate microstructured molds. This process is inexpensive and fast for small batches of devices, but lacks scalability and the ability to produce large surface-area materials. The novel fabrication process presented in this paper uses a cylindrical mold with microscale surface patterns to cure liquid PDMS prepolymer into continuous microstructured films. Results show that this …
An Investigation Of The Reynolds Number Dependence Of The Near-Wall Peak In Canonical Wall Bounded Turbulent Channel Flow, Bahareh Estejab
An Investigation Of The Reynolds Number Dependence Of The Near-Wall Peak In Canonical Wall Bounded Turbulent Channel Flow, Bahareh Estejab
University of Kentucky Master's Theses
An experimental investigation into fully developed high aspect ratio channels was undertaken. A review of the literature reveals that there is a need for accurate measurement of the inner peak value of streamwise turbulence intensity despite the large number of studies already completed. The scattered data on this subject could be attributed either to insufficient channel size (aspect ratio or length) or to hot-wire spatial filtering.
A new, high quality, channel flow facility was designed and constructed, considering the most recent geometric limitation provided in the literature. To obtain accurate results, data were acquired using hot-wire probes with constant viscous-scale …
Perch Landing Maneuvers And Control For A Rotating-Wing Mav, Jonathan Louis Lubbers
Perch Landing Maneuvers And Control For A Rotating-Wing Mav, Jonathan Louis Lubbers
University of Kentucky Master's Theses
This thesis addresses flight control of the perch landing maneuver for micro-aerial vehicles. A longitudinal flight model is constructed for a pigeon-sized aircraft. In addition to a standard elevator control surface, wing-rotation also considered as a non-standard actuator for increasing low-speed aerodynamic braking. Optimal state and control trajectories for the perch landing maneuver are computed using commercial software. A neighboring optimal control law is then developed and implemented in a set of flight simulations. Simulations are run with both a quasisteady and an unsteady aerodynamic model. The effectiveness of wing rotation and of the neighboring optimal control law is discussed, …
Modeling And Optimization To Evaluate Sustainability Performance Of Customizable Product Service Systems, Ken Harsha Tilakaratne Wijekoon
Modeling And Optimization To Evaluate Sustainability Performance Of Customizable Product Service Systems, Ken Harsha Tilakaratne Wijekoon
University of Kentucky Master's Theses
The aim of this thesis is to present a new methodology to evaluate and optimize sustainability of customizable product-service systems while ensuring economic, environmental and societal constraints are also satisfied. Activities across the total product lifecycle are considered to develop a model that evaluates closed-loop flow, while being monitored through the growth, maturity and decline stages of the product to provide a comprehensive analysis. A novel method to evaluate the customer satisfaction is also presented. The research considers a modular product where customization can be achieved by selecting from alternatives while ensuring the compatibility between these alternatives. A manufacturer will …
Mechanical Characterizations Of Environmentally Conditioned Shape Memory Polymers For Reconfigurable Aerospace Structures, Jared T. Fulcher
Mechanical Characterizations Of Environmentally Conditioned Shape Memory Polymers For Reconfigurable Aerospace Structures, Jared T. Fulcher
University of Kentucky Master's Theses
Shape memory polymers (SMPs) have been candidate materials for morphing applications. However, the SMPs have not been fully tested to work in relevant environments required for Air Force missions. In this study, an epoxy-based SMP was separately exposed to moisture, lubricating oil and UV radiation, which are simulated service environments designed to be reflective of anticipated performance requirements. The thermomechanical properties and shape memory effects were studied by using novel high-temperature nanoindentation technique. Results show that environmental conditions have affected the glass transition temperature and mechanical properties of the SMPs. In most cases, the conditioned SMPs exhibited higher elastic moduli …
Initial Design, Manufacture, And Testing Of A Cubelab Module Frame For Biological Payloads Aboard The International Space Station, Twyman Samuel Clements
Initial Design, Manufacture, And Testing Of A Cubelab Module Frame For Biological Payloads Aboard The International Space Station, Twyman Samuel Clements
University of Kentucky Master's Theses
This thesis investigates the design of a CubeLab Module frame to facilitate biological research aboard the International Space Station (ISS). With the National Laboratory designation of the ISS by the United States Congress the barriers for use of the facility have been lowered for commercial and academic entities, allowing greater volume and diversity in the research that can be done. Researchers in biology and other areas could benefit from development and adoption of a plug-and-play payload containment system for use in the microgravity/space environment of the ISS. This research includes design and analysis of such a system. It also includes …
Constrained Volume Packing Of Deployable Wings For Unmanned Aircraft, Turner John Harris
Constrained Volume Packing Of Deployable Wings For Unmanned Aircraft, Turner John Harris
University of Kentucky Master's Theses
UAVs are becoming an accepted tool for sensing. The benefits of deployable wings allow smaller transportation enclosures such as soldier back packs up to large rocket launched extraterrestrial UAVs. The packing of soft inflatable wings and Hybrid inflatable with rigid section wings is being studied at the University of Kentucky. Rigid wings are volume limited while inflatable wings are mass limited. The expected optimal wing design is a hybrid approach. Previous wing designs have been packed into different configurations in an attempt to determine the optimal stowed configurations. A comparison of rigid, hybrid, and inflatable wings will be presented. Also …
Evaluation Of Mechanical Proerties And Effective Thickness Of The Interfaces By Finite Element Analysis, Sesha Spandana Pulla
Evaluation Of Mechanical Proerties And Effective Thickness Of The Interfaces By Finite Element Analysis, Sesha Spandana Pulla
University of Kentucky Master's Theses
The nanoindentation technique has been used to identify the interfaces between dissimilar materials and subsequently to evaluate the physical and mechanical properties across the interfaces. The interfaces could represent the interface (transition face) between oxidized and unoxidized polymers, the interface between rigid fiber and polymer matrix, or other similar situations. It is proposed to use a nanoindenter equipped with small spherical tip to indent across the interfaces of dissimilar materials. The proposed method has been validated by conducting a large number of virtual experiments through 3-dimensional finite element simulations, by varying the properties of the two dissimilar materials, including various …
Experimental Flow Visualization For Corrugated Airfoils At Low Reynolds Number Including Development Of A Pitch And Plunge Fixture, Jeremy Ryan Sparks
Experimental Flow Visualization For Corrugated Airfoils At Low Reynolds Number Including Development Of A Pitch And Plunge Fixture, Jeremy Ryan Sparks
University of Kentucky Master's Theses
Micro Air Vehicles (MAV’s) have small size and extreme maneuverability which makes them ideal for surveillance. Propulsion mechanisms include propellers, rotors, and flapping airfoils. Flapping motions, along with biologically-inspired wing profiles, are of interest due to their use of natural physics. Corrugated airfoil structures appears to have poor aerodynamic performance at higher Reynolds numbers, but serve well at Re<10,000. Understanding flow structures around corrugated profiles and comparing them to a standard airfoil will aid in understanding how these corrugated profiles perform well and have been adopted by some of nature’s most acrobatic flyers. Motivation for this investigation is to compare static flow visualizations of corrugated profiles to a standard National Advisory Committee for Aeronautics (NACA) airfoil from low to high angles of attack and further observe flow structure development of a pitching and plunging flat plate at a Re<10,000 and a Strouhal number relevant to natural fliers. The static visualization was conducted at Re=1,000 with a NACA 0012 airfoil and two corrugated models. The Pitch and Plunge Fixture (PPF) developed was constructed by simplifying flapping wings as a two degree of freedom motion in plunge (translation) and pitch (rotation). Results obtained from the PPF were compared with a numerical simulation.
Bench-Scale, Multifilament Spinning Conditions Effect On The Structure And Properties Of Polyacrylonitrile Precursor Fiber, Elizabeth Ashley Morris
Bench-Scale, Multifilament Spinning Conditions Effect On The Structure And Properties Of Polyacrylonitrile Precursor Fiber, Elizabeth Ashley Morris
University of Kentucky Master's Theses
Due to its unique characteristics, carbon fiber is one of the leading materials for light weight, high strength and stiffness applications in composite materials. The development of carbon fibers approaching theoretical strengths and stiffness is a continuing process which has led to improved mechanical and physical properties over the recent years. Improvements in carbon fiber properties are directly dependent on the quality of the precursor fiber. Research and development of PAN precursor fiber requires extensive experimentation to determine how processing conditions affect the structure and properties of the precursor fibers. Therefore, it is the goal of this thesis to analyze …