Engineering Commons^™

The Development Of Initial Asphalt Mixture Acceptance Criteria Using The Scb Test And The I-Fit Test, Nathan Delman Parnell

Graduate Theses and Dissertations

Cracking has become the primary asphalt pavement distress in Arkansas. Arkansas along with other states have implemented a test to measure rutting resistance. This paper presents research to implement a cracking resistance test to further modify the Superpave volumetric asphalt mixture design method in Arkansas. The Illinois Flexibility Index Test (I-FIT) was the test chosen to analyze for this research. Two aging methods were tested, a short term oven aging (AASHTO R30 ST) and a long term oven aging (NCAT) method. Six asphalt mixtures were selected to be tested. The mixtures testes were recreated from Arkansas Department of Transportation (ARDOT) …

Understanding Asphalt Concrete Aging Using Nanoindentation, Hasan M. Faisal

Civil Engineering ETDs

Asphalt concrete (AC) is created by mixing liquid asphalt binder with solid aggregates. When asphalt binder is mixed with aggregates, it creates a thin film (about 7-16 microns thick) around the aggregate surface. Fine aggregate (smaller than 0.075 mm size) get entrapped within the binder film or mixed with the binder, and create a phase called mastic. Both asphalt film and mastic play significant roles in aging of asphalt pavement. To this day, tests were performed mainly on the bulk liquid asphalt, but not on the film or mastic. In this study, for the first time, nanoindentation tests were done …

Integration Of A Prototype Wireless Communication System With Micro-Electromechanical Temperature And Humidity Sensor For Concrete Pavement Health Monitoring, Shuo Yang, Keyan Shen, Halil Ceylan, Sunghwan Kim, Daji Qiao, Kasthurirangan Gopalakrishnan

Daji Qiao

In recent years, structural health monitoring and management (SHMM) has become a popular approach and is considered essential for achieving well-performing, long-lasting, sustainable transportation infrastructure systems. Key requirements in ideal SHMM of road infrastructure include long-term, continuous, and real-time monitoring of pavement response and performance under various pavement geometry-materials-loading configurations and environmental conditions. With advancements in wireless technologies, integration of wireless communications into sensing device is considered an alternate and superior solution to existing time- and labor-intensive wired sensing systems in meeting the requirements of an ideal SHMM. This study explored the development and integration of a wireless communications sub-system …

Evaluation Of Mechanical Parameters Of Contaminated Road Base And Railway Ballast, Prajwol Tamrakar

Open Access Theses & Dissertations

This Dissertation comprises two topics in the area of transportation geotechnics that focus on the evaluation of stiffness parameters of contaminated road base and railway ballast. The abstracts of these two studies are provided in the following two paragraphs.

The performance of a flexible pavement depends on the mechanical characteristics of its unbound granular base layer. The mechanical characteristics such as stiffness and deformation resistance depend on many factors such as the material gradation, fines content, moisture content, physical properties of coarse aggregate and more. The base materials are often contaminated by the excessive fines that is caused by improper …

Use Of Recycled Crushed Concrete (Rcc) Fines For Potential Soil Stabilization, Lindeman Mark, Varilek Brandon, Lieska Halsey, Rick Gloe, Maria Olomi

Nebraska Department of Transportation: Research Reports

This study evaluated the use of Recycled Crushed Concrete (RCC) Fines for potential soil stabilization. Soil stabilization is the enhancement of subgrade stability to improve the constructability of successive pavement layers. Use of RCC fines may not only provide less costly alternatives for subgrade stabilization, but their use may also alleviate landfill disposal challenges.

Development Of Semi-Circular Bending (Scb) Fracture Test For Bituminous Mixtures, Gabriel Nsengiyumva

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Granted that most distresses in asphalt (flexible) concrete (AC) pavements are directly related to fracture, it becomes clear that identifying and characterizing fracture properties of AC mixtures is a critical step towards a better pavement design. This thesis examines the testing variables of a reliable and practical semicircular bending (SCB) test for evaluating the fracture characteristics of asphalt concrete mixtures at intermediate service temperature conditions. The first part of this thesis investigates the repeatability of the SCB fracture test method by integrating a statistical-experimental approach to identify testing variables of the SCB test that result in repeatable test results. Toward …

Modeling Pavement Distress Rates Within U.S. Air Force Airfields, Lauren Sahagun

UNLV Theses, Dissertations, Professional Papers, and Capstones

Through the review of Pavement Condition Index (PCI) surveys completed at Air Force installations scattered across the continental United States, pavement engineers at the Air Force Civil Engineer Center propose that the predominant factor contributing to pavement distress development is climate. They suggest that within each pavement distress type (i.e. alligator cracking, rutting, spalling, etc.) a geographic pattern exists that is strongly correlated to the conventional climate zones within the US. Knowledge of these geographic patterns would equip pavement engineers and asset managers with a powerful tool to develop purposeful maintenance strategies specific to each distress type.

The following approach …