Engineering Commons^™

Integrating Information Into The Engineering Design Process, Michael Fosmire, David Radcliffe

Purdue University Press Books

Engineering design is a fundamental problem-solving model used by the discipline. Effective problem-solving requires the ability to find and incorporate quality information sources. To teach courses in this area effectively, educators need to understand the information needs of engineers and engineering students and their information gathering habits. This book provides essential guidance for engineering faculty and librarians wishing to better integrate information competencies into their curricular offerings. The treatment of the subject matter is pragmatic, accessible, and engaging. Rather than focusing on specific resources or interfaces, the book adopts a process-driven approach that outlasts changing information technologies.

After several chapters …

Ole Miss Engineer 2013-2014

Ole Miss Engineer

No abstract provided.

Motor Protection Lab Experiment Using Sel-710, Ozro Corulli

Electrical Engineering

Advancements in microprocessor based relay technology for power protection applications provide quicker response times and new methods of mitigation. This project develops a lab experiment for Cal Poly class EE444 - Power Systems Laboratory based on the Schweitzer SEL-710 motor protection relay. Learning objectives for this lab include relay setup, programming, and protection schemes for the following conditions: undervoltage, loss of phase, fault, locked rotor, and thermal overload. Today, utility companies across the globe use SEL relays for primary system protection, putting engineers familiar with their operation in high demand.

Computer Self-Efficacy, Cognitive Actions, And Metacognitive Strategies Of High School Students While Engaged In Interactive Learning Modules, Harry Budi Santoso

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to investigate high school students’ computer self-efficacy, cognitive actions, and metacognitive strategies in a self-regulated learning (SRL) framework while utilizing an interactive learning module. The researcher hypothesized that computer self-efficacy is correlated positively with cognitive actions and metacognitive strategies while the students are engaged with interactive learning modules. This research used a mixed-methods approach to answer the research questions. Two research questions guided this research: (1) How is students’ computer self-efficacy related to cognitive actions and metacognitive strategies while using interactive learning modules?; and (2) How do students plan monitor their cognitive actions, and …

Active Learning Using Model-Eliciting Activities And Inquiry-Based Learning Activities In Dynamics, Jeffrey Phillip Georgette

Master's Theses

This thesis focuses on a year-long project of implementing active learning in undergraduate dynamics courses at Cal Poly San Luis Obispo from 2012-2013. The purpose is to increase conceptual understanding of critical dynamics concepts and to repair misconceptions of the students. Conceptual understanding in Dynamics is vital to understanding the big picture, building upon previous knowledge, and better understanding the behavior of engineering systems. Through various hands-on activities, students make predictions, test their conceptions, and solve real world problems. These active learning methods allow students to improve their learning of Dynamics concepts. Education research on active learning is present in …

An Investigation Of The Asit Problem-Solving Method On Middle School Technology Education Student's Ability To Produce Creative Solutions, Jared Aaron Merrill

Theses and Dissertations

This study compared two groups of students being instructed in various methods of problem solving over a two-week period. The control group was instructed using the standard Career and Technology Education (CTE) Introduction curriculum on using brainstorming to solve problems. The treatment group was instructed using a structured problem solving method developed to help focus problem solving on finding a solution that satisfies the conditions. Students were selected from 7th grade students at a suburban middle school in Utah. The independent variable in this study was the type of problem solving instruction received. The dependent variables of interest were the …

The Humanistic Side Of Engineering: Considering Social Science And Humanities Dimensions Of Engineering In Education And Research, Morgan Hynes, Jessica Swenson

Journal of Pre-College Engineering Education Research (J-PEER)

Mathematics and science knowledge/skills are most commonly associated with engineering’s pre-requisite knowledge. Our goals in this paper are to argue for a more systematic inclusion of social science and humanities knowledge in the introduction of engineering to K-12 students. As part of this argument, we present a construct for framing the humanistic side of engineering with illustrative examples of what appealing to the humanistic side of engineering can look like in a classroom setting, and opportunities for research that examines the dynamics the humanistic side of engineering introduces into engineering learning and teaching. The illustrative examples are drawn from interactions …

Secondary Students' Conceptual Understanding Of Engineering As A Field, Devlin B. Montfort, Shane Brown, Victoria Whritenour

Journal of Pre-College Engineering Education Research (J-PEER)

Researchers have long been interested in how to recruit and retain more and more diverse students into engineering programs. One consistent challenge in this research is understanding the impacts of interventions from the point of view of the student, and how their preconceptions may influence that effectiveness. This study investigated how secondary students understand the concept of engineering, including what engineering is and what engineers do. The purpose of this work was to describe students’ conceptions of engineering, and to determine how those perceptions relate to student interest in engineering careers. The investigation was founded on the theoretical framework of …

Validating The Critical Engineering Literacy Test (Celt) With Cognitive Interviews, Margot L. Keimig, Senay Purzer

The Summer Undergraduate Research Fellowship (SURF) Symposium

The CELT learning assessment focuses on the critical thinking skills of engineering students and allows for the improvement of information literacy, one’s ability identifying and implementing important information. With the pairing of cognitive interviewing, the CELT will allow for the identification of errors and will better determine the reasoning in the decisions made by the students taking the test. The CELT test uses multiple choice and open response questions to evaluate the students and the areas where improvements need to be made. Over the course of the year, the students’ information literacy skills will be expanded and then re-evaluated at …

Visualizing Mechanics: Improving Student Learning Through Video Demonstrations, Blake A. Wetherton, Olumide A. Awofeso, Carolyn E. Creighton, Adam F. Potrzebowski, Charles M. Krousgrill, Jeffrey F. Rhoads

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Purdue Mechanics Freeform Classroom (PMFC) is a project that seeks to reform engineering mechanics education by integrating content and technology; enhancing communication between students, their peers, and instructors; accommodating a broader range of learning styles; and facilitating greater depths of understanding. In an attempt to increase the PMFC’s efficacy, a series of demonstration videos has been produced. As demonstrated by the popularity and pervasiveness of websites such as YouTube, short videos have the potential to captivate audiences. As such, these videos have incredible promise in educational contexts. In the PMFC series of videos, entitled Visualizing Mechanics, each imitates the …

Development Of Pneumatic Robot For Outreach, Eshamogbo E. Ojuba, John Lumkes

The Summer Undergraduate Research Fellowship (SURF) Symposium

To encourage the current generation of high school and middle school students to pursue careers in engineering, it is important to have challenging hands-on engineering activities for them. Such activities should be interesting, compelling, and, most importantly, educative. A mini-excavator was built for fluid power outreach, but this tool only demonstrates fluid power, without showing other important aspects of engineering. The tool being developed is able to demonstrate fluid power, as well as other important aspects of engineering, such as controls, electronics, and programming. This tool is an electronically-controlled device that allows the user control a pneumatic circuit, coupled with …

2013 Student Launch Initiative Project With Dielectrophoresis, Amit Patel, Jacob Cranford

Von Braun Symposium Student Posters

No abstract provided.

Engineering Experience Through The Cansat Competition - An Opportunity For Student Development Of An Aerospace System, Trey Mcferrin

Von Braun Symposium Student Posters

No abstract provided.

Lunabotics: A Student Competition For Exploring The Challenges Of Regolith Harvesting In Extraterrestrial Environments, Ethan Hopping, Roberto Dextre

Von Braun Symposium Student Posters

No abstract provided.

Free Your Mind-Unlock Your Inner Creativity, Alyssa Black, William Dow, Stephanie Harrison, Adam Kerbs, Katheleen Mcguire, Phillip Stroch, Jessica Urbano, Bradley Chase, Frank G. Jacobitz, Thomas Schubert

School of Engineering: Faculty Scholarship

Creativity is a major factor in many careers, subjects, and disciplines. Although many people first assume engineering to be a field of study that does not require any creativity, it is actually an essential tool for successful engineers. The mark of a truly accomplished engineer is the ability to problem-solve effectively; in other words, to generate creative solutions. Although the goal as engineers is to become more creative throughout one’s career, is it even possible to gain creativity? Is creativity an innate quality, or a learned one? Since the engineering process demands creativity, we looked into how creativity can be …

Sweet (Small Wind Energy Estimation Tool), Thomas Woolmington, Keith Sunderland

Other resources

Description:

Generic Wind Energy Estimation Model incorporating Turbulence Intensity.

Requirements:

Manufacturer specific wind turbine characteristic

Mean wind speed at a specific height

Site conditions in terms of TI and Surface Roughness

Disclaimer:

This model has been designed as an estimation tool for estimating the wind power yield of a custom turbine for an idealised set of site conditions for a given year.

While the assumptions that are made in this estimation tool are mathematically plausible they should not in any way be interpreted as an alternative to a real world site assessment.

A list of assumptions to which the model …

Bridging The Gap Between Engineering Design And Pk-12 Curriculum Development Through The Use The Stem Education Quality Framework, Margaret Pinnell, James Rowley, Sandi Preiss, Rebecca P. Blust, Rebecca Beach, Suzanne Franco

Mechanical and Aerospace Engineering Faculty Publications

This paper will describe a unique partnership among the Department of Teacher Education and School of Engineering at the University of Dayton (UD) and the Dayton Regional STEM Center (DRSC). This partnership resulted in the development of the STEM Education Quality Framework (SQF), a tool to guide educators in teaching, learning and refining STEM education. The SQF resulted in a variety of educational tools, including a STEM curriculum template, that was implemented in the DRSCs teacher professional development and curriculum development program entitled the STEM Fellow Program. The STEM Fellow program was later modeled in a unique, NSF sponsored six …

The Impacts Of Societal Context On Student Motivation And Engagement, Jonathan Stolk

Jonathan Stolk

Promoting a sense of societal connectedness is critical in today’s engineering educational environment. The NAE’s Grand Challenges for Engineering point to broad human concerns — sustainability, health, vulnerability, and joy of living — and human connectivity as the future of engineering problem solving. Engineering studies, however, are often presented in a completely decontextualized manner, with an emphasis on technical content that is free of any human meaning. As a result, students may have difficulty identifying either personal or societal value in their learning tasks. Through their course design, instructors can help students situate themselves and their engineering learning experiences within …

An Interactive Exploration Of Gender And Engineering: Unpacking The Experience, Debbie Chachra, Lynn Stein, Alisha Sarang-Sieminski, Caitrin Lynch, Yevgeniya Zastavker

Alisha L. Sarang-Sieminski

The engineering student experience is understood to differ for male and female students; gendered interactions affect the development of academic and professional role confidence, as well as engineering identity. The purpose of this session is twofold. First, we aim to introduce participants to concepts of gender schemas, privilege, and identity using a range of interactive activities, including brainstorming and structured discussion. Second, we intend to share information about and obtain feedback on a Gender Discussion Exploration Kit, which the participants will be encouraged to review, use, and share at their home institutions.

Developing A Small-Footprint Bioengineering Program, Alisha Sarang-Sieminski, Debbie Chachra

Alisha L. Sarang-Sieminski

The field of bioengineering is rapidly changing and expanding to include not only more traditional bioengineering applications (e.g. device-focused areas such as prosthetics, imaging) but also more recent sub-fields and technologies(e.g. more biologically-focused areas such as those enabled by tissue engineering and microfluidics). This rapid change, coupled with the intrinsically interdisciplinary nature of bioengineering, presents a unique challenge to the developers of academic programs, as they need to both select relevant content and strike a balance between depth and breadth. We, the architects of the bioengineering program at the undergraduate-only Franklin W. Olin College of Engineering, which enrolled its first …

Issues In Organisation And Management Of Multidisciplinary Group Design Projects, Ken Keating, Claire Brougham, Graham Gavin, Ger Reilly

Conference Papers

No abstract provided.

Defining Characteristics Of An Integrated Stem Curriculum In K-12 Education, Vinson Robert Carter

Graduate Theses and Dissertations

The purpose of the study was to obtain consensus concerning the defining characteristics of integrated STEM (Science, Technology, Engineering, and Mathematics) curriculum. This study utilized a three round modified Delphi study to solicit recommendations from experts of STEM education in order to: 1) create a set of categorical and defining curricular components needed to develop and implement appropriate integrated STEM curriculum; 2) identify the characteristics that set integrated STEM education curriculum apart from single-discipline curricula; 3) discuss the components necessary to gauge whether an initiative, project, or curriculum should be referred to as integrated STEM education; and 4) examine whether …

Why Do Indiana Pre-Service Technology Education Majors Choose The Profession, Traves L. Freeland

Purdue Polytechnic Masters Theses

The purpose of this descriptive study was to look at the factors that influence pre-service technology education majors to choose to become teachers. The pre-service teachers of three Indiana technology education teacher preparatory programs were given an internet survey to collect demographic data and determine what factors influence current pre-service teachers. The results of this study were compared to the results from a study done by Harris (2007). The findings resulted in similar factors that were the most common identified as being influential. Those factors included personal interest or hobbies, high school or middle school teacher, and past experiences in …

Educating The Professional Engineer Of 2020: The Changing Licensure Requirements, Susan L. Murray, Terri M. Lynch-Caris

Engineering Management and Systems Engineering Faculty Research & Creative Works

Engineering education programs would be well served to align their curricula and program outcomes to the Fundamentals of Engineering (FE) Exam and Professional Engineer (PE) Exam specifications. These exams are required steps in the process of becoming a licensed engineer in most states. NCEES (the National Council of Examiners for Engineering and Surveying) is a national nonprofit organization dedicated to advancing professional licensure for engineers and surveyors. It develops, administers, and scores these examinations used for engineering licensure. Starting in 2011, NCEES held survey-creation meetings with diverse teams to develop a draft survey containing the subjects in each discipline and …

An Engineering Physics Introduction To Electronics For Ece Sophomores, Steve Eugene Watkins

Electrical and Computer Engineering Faculty Research & Creative Works

Electronic devices and circuits are fundamental parts of undergraduate curricula in electrical engineering and computer engineering (ECE). A sophomore-level course that gives a balanced treatment of semiconductor device physics and electronic circuit analysis is described. The course topics are semiconductor physics, diodes, transistors, operational amplifiers, and optoelectronics. The course is a prerequisite for upper-level electronics, semiconductor physics, and semiconductor circuit layout curricula. A stronger link between physical principles and device behavior and an improved sequence in electronics instruction are outcomes.

Beyond Jee: Finding Publication Venues To Get Your Message To The ‘Right’ Audience, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

Very few publications exist outlining the different publishing opportunities within engineering education as a discipline. Most researchers think immediately of the Journal of Engineering Education (JEE), and as the primary publication associated with the American Society for Engineering Education it is a logical first thought.

Questions arise with new graduate students and young faculty who are trying to learn the scope of engineering education as a research discipline and need to identify possible publication venues. A broad list of publications has been generated and is maintained by the ASEE Student Division in cooperation with the Center for Engineering Learning and …

Educating For Evidence Based Decisions In Engineering: The View As Librarian And Instructor, Amy S. Van Epps

Libraries Faculty and Staff Scholarship and Research

The First Year Engineering program at Purdue University is regularly reviewed and revised to adapt to the needs of the students, feedback from teaching faculty, and the changing needs of the university curriculum. In the last year, a unifying theme was added to the class to help tie all the different activities together. That theme was “evidence based decision making in engineering”, a perfect fit for introducing and discussing information literacy many times throughout the semester, rather than in a single, isolated session.

As instructor for one section of the class, the author identifies benefits to including this message throughout …

Public Works For Public Learning: A Case Study, Thalia Anagnos, Beckey Carroll, Shannon Weiss, David Heil

Faculty Publications

Large scale and small scale public works projects are important in the smooth operation of every community, yet a majority of the population has little awareness of how these projects work and what their functions are. Few non-engineers understand the engineering challenges of delivering clean water, disposing of our sewage, or changing a traditional intersection into a round-about, a project that seems quite simple on the surface. A consortium of public works engineers, science museums, faculty, and exhibit evaluators were awarded a grant by the National Science Foundation to build an outdoor museum next to a large suspension bridge. The …

Curriculum Exchange: “Make Your Own Earthquake”, Sandra Seale, Thalia Anagnos, Lelli Van Den Einde

Faculty Publications

A consortium of American universities is involved in earthquake engineering practice and research. Each campus of the consortium participates in outreach and education activities for the local schools and the public. One campus of the consortium, which operates earthquake field sites, designed a K-12 activity called “Make Your Own Earthquake” (MYOE). MYOE involves setting up earthquake field equipment (seismic instruments, data loggers, and computers) in a classroom. Children jump for 10 seconds, see their earthquake trace live on a computer screen and then take home a printed copy of their personal earthquake. Software was developed specifically for this activity. MYOE …

Public Works Projects As Vehicles For Engineering Education And Outreach, Shannon Weiss, David Heil, Thalia Anagnos

Faculty Publications

America is built on small and large feats of public works engineering that, although often taken for granted, affect almost every aspect of our daily lives. So how can we celebrate these marvels of utilitarian infrastructure and use them to teach public audiences about the engineering principles, materials, and human innovations that make them possible? This case study will share how one project addressed these questions by leveraging informal learning strategies, multi-agency collaborations, and new media technologies to explain the history and engineering of one of the world’s most recognizable public work sites: the Golden Gate Bridge. This paper will …