Engineering Commons^™

Shaping Aam Educational Methods: A Comparison Of Traditional And Compressed Class Schedules In Uas Classes., Collin D. Mcdonald, Daniel Siao, Kevin Corns

National Training Aircraft Symposium (NTAS)

Advanced Air Mobility (AAM) is a paradigm shift in the versatility of the aviation industry. The obvious benefits of this platform will revolutionize a variety of aspects of the industry. One of the aspects in which the Federal Aviation Administration (FAA) has recommended research is the effectiveness of the traditional educational methods. Spurred by the COVID-19 pandemic, online teaching methodologies have become widely accepted in aviation. In addition, the format of traditional, instructor-led courses have also changed. Compressed schedules (accelerated courses) have become an additional option in some programs.

To better understand if there are statistically significant differences in testing …

Assessing The Effectiveness Of Nuclear Security Training And Education In Ghana, Michael Nii Sanka Ansah, Boris Stepanov Pavlovich, Paul Atta Amoah, David Okoh Kpeglo, Simon Adu, Bright Kwame Afornu

International Journal of Nuclear Security

Growing attention is being given to nuclear power across several African countries, including in Ghana. The world is depending on nuclear energy as a reliable and efficient means of energy generation. Ghana as a country is developing nuclear energy; thus, equal attention must be directed toward nuclear safety and security. Ghana is gradually developing interest in and is devoting substantial required resources to educating and training on nuclear security to meet the standards required by international bodies. Institutions such as the Nuclear Safety and Security Centre and the School of Nuclear and Allied Sciences of the Ghana Atomic Energy Commission …

Remote Laboratory For Nuclear Security Education, Anthony R. Galindo, Craig Marianno

International Journal of Nuclear Security

Laboratory experiences for online students are very limited. To fill this gap, educators in the Department of Nuclear Engineering at Texas A&M University developed a series of radiation detection experiments for their remote students. Radiation detection is only one piece of nuclear security. The objective of the current research is to describe the development and execution of three online laboratories that investigate the basic application of physical security sensors that use light, ultrasonics, and heat to detect adversaries. This laboratory complements lecture material from the department’s Nuclear Security System and Design course. Using the Remote Desktop Application, students connect to …

Editor's Forward, James Hutson

International Journal of Emerging and Disruptive Innovation in Education : VISIONARIUM

No abstract provided.

Simulating Function Generators And Oscilloscopes In A Virtual Laboratory Environment, Yiyang Li, Yuzhong Shen, Charles I. Sukenik

Modeling, Simulation and Visualization Student Capstone Conference

This paper discusses the development of a virtual laboratory for simulating electronic instruments commonly used in science and engineering courses, such as function generators and digital storage oscilloscopes. Mathematical equations are used to represent continuous signals and ensure signal integrity, while C# delegates are adopted to enable communication between simulated devices. The approach allows for loose coupling between software components and high cohesion of individual components, and can be applied to other virtual laboratory developments. The virtual laboratory provides a means for students to gain hands-on experience with electronic instruments and improve their understanding of theoretical concepts.

Extracting A Body Of Knowledge As A First Step Towards Defining A United Software Engineering Curriculum Guideline, Anton Kiselev

Doctoral Dissertations and Master's Theses

In general, the computing field is a rapidly changing environment, and as such, software engineering education must be able to adjust quickly to new needs. Industry adapts to technologies as fast as it can, but the critical issue is a need for recent graduates with the necessary expertise and knowledge of new trends, technologies, and practical experience. The industries that employ graduates of computing degree programs aim to hire those who are familiar with the latest technical traits, tools, and methodologies to meet these needs, and the software engineering curriculum needs to respond quickly to these needs. Still, unfortunately, software …

Metascapes | Architectural Quests In The Metaverse, Michail Georgiou, Odysseas Georgiou, Ioulios Georgiou

Architecture and Planning Journal (APJ)

The paper investigates the appropriateness of CAAD software and computational design tools for the creation of metaverse content along with the workflows and limitations involved. In parallel the research aims to assess the validity of architecture design studio research in the context of the metaverse, and its capability to produce results that justify further explorations in such direction.

Integration Of Omnet++ Into A Networking Course In An Electrical Engineering Technology Program, Murat Kuzlu, Brian Emmanuel Tamayo, Salih Sarp, Otilia Popescu, Vukica M. Jovanovic

Engineering Technology Faculty Publications

Networking courses are an integral part of electrical engineering technology programs as the majority of electronics in the modern day are required to communicate with each other. They are also getting more attention in manufacturing engineering technology programs because of the development of emerging technologies in Industry 4.0 arena. From laptops, computers, cellphones, modern day vehicles and smart refrigerators, these devices require a certain level of networking in order to communicate with other devices, whether it be locally, or even across the other side of the world. The objective of networking courses in an electrical engineering program is to demonstrate …

Xr In Aviation Training: Insight From Academia, Industry, And Non-Profit Institutions, Stephanie G. Fussell, Robert L. Thomas, Bejamin Kwasa, James Birdsong, Kurt Reesman, Lori Brow, Joel Scharlat, William T. Ballo

National Training Aircraft Symposium (NTAS)

The COVID-19 pandemic had a profound impact on education and training. Institutions that relied heavily on face-to-face instruction suddenly needed alternative modalities to keep students on course, forcing educators and trainers to employ a variety of educational techniques via technologies that they may not have had experience with. This shift has brought the advantages – and disadvantages – of augmented, mixed, and virtual reality technologies (collectively, extended reality or XR) for education and training into sharp focus. Programs were quickly assembled, and not always with consideration of learning theories. As learning and training were resumed in in-person settings, academics and …

Reality Capture Course Content: Exposing The Next Generation Of Builders To Technology Moving The Industry Forward, Maxwell S. Eisner

Construction Management

This paper discusses the development and execution of lecture and laboratory educational content regarding reality capture technology and workflows. These educational modules were created to cover different use cases for reality capture technology that are currently being used in the construction industry. They also show how reality capture plays a role in the larger virtual design in construction (BIM) process. Importantly, these labs were designed to be completed with the LiDAR scanner on a typical iPhone, which has lowered the barrier to entry for reality capture education and use in industry. While the initial teaching of these courses was done …

Sullivan, Vic, Collection, 1923-1974, Special Collections, Leonard H. Axe Library

Finding Aids

This collection consists of collection of documents and reports on the planning and construction of the Kansas Technology Center; slides of university trips and family; and miscellaneous.

Frank Victor Sullivan was born in Wichita, Kansas in 1931. He became fascinated with airplanes and flying growing up in Wichita, and was a member of the Boy Scouts. He would go on to earn a private pilot’s license. He received his bachelor’s degree from Friends University (Wichita). He met his wife, Mary-Kate Larson, while he was in graduate school at the University of Northern Colorado, in Greeley. After they married, they moved …

The Impact Of Virtual Learning Modalities On The Academic Success Of Students In One Arkansas School District, Diane F. Richards

ATU Theses and Dissertations 2021 - Present

The COVID-19 pandemic changed the way Arkansas public schools’ offered students an education. While moving through this pandemic, many Arkansas schools implemented optional methods of delivery for their students. Some schools tried to maintain face-to-face classes, while others offered completely online classes. Still, others offered a hybrid format where students attended some face-to-face classes and online classes. One Arkansas school district offered all three options. School districts need guidance as to which teaching methods worked well. The long-term effects of the educational impact of COVID-19 are not known at this time. Schools could benefit from a guide with useful strategies …

Climate Justice In Engineering Education, Tyler J. Morgan, Donna Riley, Caroline M. Camfield

Discovery Undergraduate Interdisciplinary Research Internship

The goal of this research is to design a learning module for Purdue first-year engineering (FYE) students to learn climate fundamentals, and the role of engineers in responding to climate justice challenges. There is a lack of climate material within these classes currently, leading to a lack of climate conscious engineers in the future. The project entailed reviewing and synthesizing a wide variety of previous research on climate change education in engineering, including key learning objectives and their assessment. Because one of the key foci of the first-year engineering sequence relates to data analysis and management, we focused our work …

Dialysis Patient Education On The Prevention Of Kidney Disease Prior To Patients Receiving Dialysis: A Retrospective Descriptive Study, Jamie D. Jones

ATU Theses and Dissertations 2021 - Present

Fifty-two adult patients at an outpatient dialysis center in central Arkansas were surveyed regarding the education that was provided by medical professionals related to kidney disease and dialysis during treatment of hypertension and diabetes. The twenty-question survey inquired about demographic information, medical history, and the timing and perceived comprehension of education received. The researcher discovered that the majority of patients did not receive education that identified hypertension and diabetes as contributing factors of kidney disease until after diagnosis of kidney disease. The vast majority of participants reported that education regarding the life implications of dialysis, including fluid and dietary restrictions, …

Steam Explores Project Based Assessments, Erica Luvone, Loretta Radulic, Joe Mondanaro, Nicole Acevedo, Erika Dent, Ann Rhodes

STEM Month

This year, our approach to STEAM explores project based assessments in the disciplines of science and social studies. Students work in groups to produce projects that showcase work and proficiency. These projects are presented, displayed, discussed, and revisited or revised at student discretion.

Steam Report By Siri Ojamaa, Jacqueline Docampo

STEM Month

My name is Siri Ojamaa I am in 5th grade at Theadore Roosevelt school. I live in Weehawken, NJ. I really love Steam and I wanted to tell you about my experience with Steam

Steam Report By Summer Diaz, Summer Diaz

STEM Month

Hi, my name is Summer Diaz. I am 10 years old and a student at Theodore Roosevelt School (TRS) in Weehawken. I am here to talk to you about my process through STEAM. STEAM is a very important and difficult task to do because I have done many projects involving STEAM like my Umbrella Holder that I made when I was 8 in 3rd grade. Which prevents having so much groceries in your hand when it’s raining so you only have to hold one thing. Then my most recent project is Finder which prevents you from losing your lost devices.

3 Stem Projects By Fares Soliman, Fares Soliman

STEM Month

My name is Fares Soliman. I am a fourth grade student from John Hill School Boonton NJ. I created a 3 STEM project. The first project that I made was a doll. I used pink yarn for the dress and brown yarn for the hair. I also used a round wooden ball for the face. The second project that I created was a diorama of a farm. I put some grass, trees, a barn, hay sticks, some animals, a bridge, a fence, some plastic food and corn for the crop. My third project was a diorama of a park. It …

Students Interest And Thoughts On Stem, Chrisitine Girtain

STEM Month

I am Juan Sebastian Bohorquez Mora, I am a sophomore student at Toms River High School North. I am interested in biofuels because I believe they are a good option to replace fossil fuels. I am also interested in duckweed because biofuels are made out of crops, and people need to eat those crops. That’s when duckweed comes in and it can be used as a feedstock for ethanol production which is a biofuel. Bioethanol is a type of biofuel and it is derived from the corn’s starch. Instead of making ethanol from the corn’s starch, we can use duckweed …

Learning's In Stem, Victoria Arms

STEM Month

Can you share something you have learned related to a STEM topic you feel is important?

Answer: A stem topic I feel is important is math because you can learn many equation’s.

Can you explain why that topic is important to you, their families and communities? Answer: The topic that is important to our families and community is important because you can grow smarter and can learn a lot of things.

Mrs.Arms class.

School's Approach To Science, Technology, Engineering, And Math (Stem), Alissa Schonmann, Mark Maire, C. Lionbailey, A. Kramar, Lindsay Vieira

STEM Month

We have a huge emphasis on STEAM in our school district. Our curriculum focuses on student-led hands-on challenges. Students are given problems to solve and they use the Engineering Design Process to come up with creative solutions. Although we like the solutions that students come up with, we emphasize the journey through the entire process. Students understand that even though they have a solution, they can still reflect on how they could improve their work further. We are fortunate enough to have an abundance of technologies in our beautiful STEAM Lab. The STEAM Lab is equipped with VR stations, 3D …

Society Dilemma Of Computer Technology Management In Today's World, Iwasan D. Kejawa Ed.D

School of Computing: Faculty Publications

Abstract - Is it true that some of the inhabitants of the world’s today are still hesitant in using computers? Research has shown that today many people are still against the use of computers. Computer technology management can be said to be obliterated by security problems. Research shows that some people in society feel reluctant or afraid to use computers because of errors and exposure of their privacy and their sophistication, which sometimes are caused by computer hackers and malfunction of the computers. The dilemma of not utilizing computer technology at all or, to its utmost, by certain people in …

Removing The Veil: Shining Light On The Lack Of Inclusivity In Cybersecurity Education For Students With Disabilities, Felicia Hellems, Sajal Bhatia

School of Computer Science & Engineering Faculty Publications

There are currently over one billion people living with some form of disability worldwide. The continuous increase in new technologies in today's society comes with an increased risk in security. A fundamental knowledge of cybersecurity should be a basic right available to all users of technology. A review of literature in the fields of cybersecurity, STEM, and computer science (CS) has revealed existent gaps regarding educational methods for teaching cybersecurity to students with disabilities (SWD's). To date, SWD's are largely left without equitable access to cybersecurity education. Our goal is to identify current educational methods being used to teach SWD's …

Mckee, Ronald R., Collection, 1995-2000, Special Collections, Leonard H. Axe Library

Finding Aids

The Ronald R. McKee Collection consists of textbooks, instructor guides, student guides, and lesson packages relating to industrial arts and technology.

Ronald R. McKee was born January 17, 1942 in Mason City, Washington, and grew up in Green Acres, Washington. He graduated from Central Valley High School in nearby Spokane Valley in 1960. Ronald married Patricia Taylor in 1962 and they had four children. In 1969, McKee earned a B.S. and an M.S. at Eastern Washington College (today Eastern Washington University). In 1970, he earned his Ed.D at Utah State University. He began work at Kansas State College of Pittsburg …

Stem For All Showcase Report, Bruce G. Bukiet, James M. Lipuma

STEM Month

This article and the associated STEM for all showcase submission video (https://www.youtube.com/watch?v=Clps427rdDc) was presented at the NSF 2021 STEM FOR ALL COVID, Equity & Social Justice Conference, May 11-18.

This article provides a description of the development of the STEM in your Home project in the STEM for Success initiative.

Chambers, Gene, Collection, 1952-2013, Special Collections, Leonard H. Axe Library

Finding Aids

The Gene Chambers Collection includes personal and professional papers and documents, including work from his time as a professor at Pittsburg State University and consulting work he did on engineering matters.

Using Scrum To Teach Standards-Based K-12 Computer Science: A Prosepectus For A Master’S Level Methods Class At Buffalo State, Noah M. Pierce

Career & Technical Education Theses

Computer Science has been increasingly prevalent in K-12 education in recent decades. Most Americans believe that Computer Science is as important as other skills taught in school; further, parents are putting pressure on districts to offer Computer Science programs (1.1). To meet this demand, many teacher preparation programs are adding Computer Science Education to their offering of degrees. This thesis investigates Agile and Scrum product development as a potential method of Computer Science instruction, explores the standards relevant to a Computer Science teacher, and offers a prospectus for a new Graduate Level Methods class to prepare Computer Science teachers to …

Improving Student Success And Engagement In Virtual And Hybrid Classrooms., Sydney Fogo

Electronic Theses and Dissertations

The following thesis examines virtual classes from the University of Louisville in the Fall 2020 semester to discover points of weakness relative to keeping students engaged in online courses. Three surveys were taken by a select group of participants over the course of the fall semester in order to collect student opinion on specific classes. Interviews were held with a subset of students from the group of participants and also with professors who taught the study’s participants in the fall of 2020. Their responses and conversations were used to determine possible areas of improvement for virtual classes. This information was …

Effective Gamification Within Educational Virtual Reality Environments, Adrian Pilkington

Honors Theses

With the advent and now widespread use of mobile phones and computers in educational settings, exploring effective and new ways of using technology in the classroom is important for educating the next generation of students. Innovative technology, like Virtual Reality, has started being discussed and researched for its potential benefits in educational settings. This paper presents a brief history of VR, game theory, and examines two VR educational games from the University of Nebraska-Lincoln College of Nursing’s (UNMC) Senior Design teams. The two games will be used to replace lecture-style classes and to go out and educate the community. We …

Powell, William E., Collection, 1912-2011, Special Collections, Leonard H. Axe Library

Finding Aids

A collection of documents, papers, and letters regarding William E. Powell’s research of mining and European immigrants in southeast Kansas.

Dr. William E. Powell received his Bachelor of Science in Geology (major) and Geography (minor) from Oklahoma State University in 1954. He went on to receive his Master of Science in Geology from the University of Arkansas in 1958 and his Doctor of Philosophy in Geography from the University of Nebraska in 1970. While earning his doctorate, Dr. Powell studied French and German. Later in his life he began to learn Italian, striving for complete fluency. He was a professor …