Engineering Commons^™

Introduction To Volume 4, Issue 1 (December 2022), Brent Jesiek

Journal of International Engineering Education

This editorial introduces this new issue of JIEE, featuring three papers that cover a wide variety of perspectives and topics. The first two papers originated in our late 2020 call for manuscripts addressing how the COVID-19 pandemic has impacted international engineering education. These papers once again underscore how the pandemic has spurred innovations in global program design. We close with a third paper that presents a wide-ranging review and synthesis of prior scholarship in the area of global engineering ethics.

Putting The Coronavirus To Work: Developing A Global Engineering Program During A Pandemic, Cynthia S. Chalupa

Journal of International Engineering Education

In the aftermath of COVID-19 shutdowns at campuses across the U.S. in the spring of 2020, student enrollments have fallen and budgets have been severely constrained. To counteract the current and long-term repercussions of the pandemic on institutions of higher education, administrators have called for innovative program development and strategic transformation. In the past, many engineering and world languages departments may have considered the task of creating a collaborative degree program insurmountable or undesirable despite existing models that are successful (e.g. University of Rhode Island’s IEP program). In the era of COVID-19, however, innovative programs combining language with disciplines outside …

Coronacredits: Program Innovations To Aid Student Completion Of Disrupted Fieldwork Abroad Due To The Covid-19 Pandemic, Benning W. Tieke, Marcela Pino Alcaraz, Melissa Armstrong

Journal of International Engineering Education

The Spring 2020 semester provided unique challenges for global experiences of all types to meet the intended learning objectives for students due to the COVID-19 pandemic disruption. This was especially true for experiential language and cultural immersion programs where engineering students were in the midst of their fieldwork experience abroad. The COVID-19 disruption presented unique challenges to recreate language and cultural understanding within international engineering fieldwork experiences in the US. This article outlines the response to the COVID-19 pandemic by the Interdisciplinary Global Programs (IGP) at Northern Arizona University (NAU). The IGP response was an innovative interdisciplinary and cross-institutional collaboration …

Global Engineering Ethics: What? Why? How? And When?, Rockwell F. Clancy Iii, Qin Zhu

Journal of International Engineering Education

Even though engineering programs, accreditation bodies, and multinational corporations have become increasingly interested in introducing global dimensions into professional engineering practice, little work in the existing literature provides an overview of questions fundamental to global engineering ethics, such as what global engineering ethics is, why it should be taught, how it should be taught, and when it should be introduced. This paper describes the what, why, how, and when of global engineering ethics – a form adopted from a 1996 article by Charles Harris, Michael Davis, Michael Pritchard, and Michael Rabins, which has influenced the development of engineering ethics for …

30 Años De Transformación Regional. Soacha, Jesús Enrique Pabón Quintero, Claudia Sofía González Sánchez, Catalina Ramírez Machado, Edwar Javier Prieto Suárez, Eduar Alonso Ceballos Bernal, Yury Julieth Garzón Rodríguez, Diana Karina López Carreño, Micher Alexander González Monroy, Yudy Amparo Narváez Vallejo, Dilia Inés Molina Cubillos, Rubén Dario Rodríguez Useche

Institucional

El presente libro contiene simplificadamente, la reseña histórica de la Universidad de Cundinamarca, Extensión Soacha, la cual hace referencia desde su nacimiento hasta los avances, transformaciones e impactos que ha generado no solo en el municipio de Soacha, sino municipios como Sibaté, Funza, Mosquera y la misma capital del País, Bogotá. Incluye además la oferta académica y la contribución e implementación del Modelo Educativo Digital Transmoderno - MEDIT en la Extensión. De igual manera cuenta con los capítulos relacionados con la Ciencia, Tecnología e Innovación del programa de Ciencias del Deporte y la Educación Física desde el MEDIT; el cual …

Xr In Aviation Training: Insight From Academia, Industry, And Non-Profit Institutions, Stephanie G. Fussell, Robert L. Thomas, Bejamin Kwasa, James Birdsong, Kurt Reesman, Lori Brow, Joel Scharlat, William T. Ballo

National Training Aircraft Symposium (NTAS)

The COVID-19 pandemic had a profound impact on education and training. Institutions that relied heavily on face-to-face instruction suddenly needed alternative modalities to keep students on course, forcing educators and trainers to employ a variety of educational techniques via technologies that they may not have had experience with. This shift has brought the advantages – and disadvantages – of augmented, mixed, and virtual reality technologies (collectively, extended reality or XR) for education and training into sharp focus. Programs were quickly assembled, and not always with consideration of learning theories. As learning and training were resumed in in-person settings, academics and …

Evaluating System Usability, Workload Suitability, And User Experience Of Game-Based Virtual Reality In Spaceflight Education And Training, Lana Laskey, Joseph Keebler

National Training Aircraft Symposium (NTAS)

Game-based instruction and immersive virtual reality are enhanced pedagogical methods beneficial in training environments involving complex disciplines, ranging from medical applications to construction engineering technology. This study investigated the use of game-based virtual reality (GBVR) when applied to the complex discipline of spaceflight education and training. As modern society places increasing demand on space-based amenities, the need for proficient satellite operators will also increase, requiring more accessible and more advanced training options. Spaceflight training scenarios, immersed in the GBVR environment, were developed and deployed to university student participants. Multiple validated scales were used to measure the GBVR system regarding three …

Creating The Next Generation Of Aviation Professionals: Creating Diversity In The Next Generation, Jason T. Lorenzon

National Training Aircraft Symposium (NTAS)

Covid-19, mandatory retirement age, the 1500 Hour ATP rule and lack of future aviation professionals has lead to a global industry crisis. With the boom of the 1990’s, 9/11, the Great Recession, Covid-19, the lack of younger individuals dedicating themselves to the study of aviation has led to a current crisis of a lack of aviation professionals ready to serve the industry currently and in the future. Lorenzon will trace how the work force shortage started well over twenty years ago. Boeing and Airbus both predict that over 2.2 million new workers including over 600000 pilots will be needed. Yet …

4-H Summer Of Stem: A Practical Approach To Increasing Workforce Readiness, Vernelle Mitchell-Hawkins, Jessica Mellon

The Journal of Extension

4-H Summer of STEM is a workforce readiness program for high school youth. The goals of the program are to increase students’ interest in STEM careers, improve college and workforce readiness, and connect youth to businesses and industries in the local community. Selected youth receive hands-on development of workforce readiness skills, are paired with a STEM mentor for job shadowing, and participate in college campus visits. Preliminary findings show that participants reported having a positive relationship between participation in 4-H youth development programs and career skills. This article introduces the 4-H Summer of STEM and offers suggestions for implementation.

A Model For Equity-Oriented Prek-12 Engineering, Christine M. Cunningham, Gregory J. Kelly

Journal of Pre-College Engineering Education Research (J-PEER)

In this paper, we address the societally important issue of developing a more equitable approach to preK-12 engineering education. Our primary emphasis is on K-8 grades—a time when first impressions of engineering may be developed. Calls for increased participation by all students, including those who have been historically marginalized, motivate the need for theoretically grounded ways of developing and assessing educational programs. This paper draws from sociocultural learning theory and applies four theoretical and empirical analyses to derive design principles for equity that can inform curriculum, instruction, and assessment of preK-12 engineering education programs. We present a model for equity-oriented …

Making In Media Education: An Activity-Oriented Approach To Digital Literacy, Thomas Knaus

Journal of Media Literacy Education

Why is maker education a suitable approach for giving learners the 21st century skills they need to cope with the digital transformation? This article provides an answer and represents a defense of maker education in the field of educational science. Taking a human-media-machine interaction model as the basis for discussion, this article highlights the growing importance of digital technology as well as technological principles for human communication and interaction. Communication technology and the influence of technology on culture and society require a broad understanding of media literacy in the sense of digital literacy. By broadening the theoretical basis of media …

Indicadores De Sustentabilidad Vba Mesmis, Geovanny Andres Martinez Jimenez

Ciencias Administrativas, Económicas y Contables

El presente libro se ha diseñado con el propósito de que el lector tenga una experiencia satisfactoria al momento de emplear los indicadores VBA MESMIS. Por tanto, el documento se estructura de manera minuciosa en dos apartados; el primero que trata acerca de los criterios de diagnóstico, en el que se plantea un ejemplo con información de tres unidades productivas, con el fin de i) desarrollar los indicadores correspondientes a los criterios; ii) conocer el nivel de desempeño de los indicadores; iii) realizar un análisis general y proponer recomendaciones para el fortalecimiento de la sustentabilidad de las unidades productivas; en …

Perceived Factors Contributing To The Subjective Wellbeing Of Undergraduate Engineering Students: An Exploratory Study, Muhammad Asghar, Angela Minichiello, Assad Iqbal

Engineering Education Student Research

Engineering education is perceived to be a tough field of study with detrimental effects on the mental health of undergraduate engineering students. High levels of anxiety and depression are reported among this population. Overall, mental health research is often biased toward looking at mental health from a deficit perspective and investigating mental health as a negative phenomenon. This trend also persists in engineering education research. The purpose of this exploratory study, therefore, is to investigate the condition of subjective wellbeing (SWB) of undergraduate engineering students to understand the factors that they perceive as positively contributing to their overall wellbeing in …

2022 - The Third Annual Fall Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Fall 2022 Symposium of Student Scholars, held on November 17, 2022. Includes abstracts from the presentations and posters.

Afit By The Numbers, Fy2022, Air Force Institute Of Technology

AFIT Documents

No abstract provided.

Reality Capture Course Content: Exposing The Next Generation Of Builders To Technology Moving The Industry Forward, Maxwell S. Eisner

Construction Management

This paper discusses the development and execution of lecture and laboratory educational content regarding reality capture technology and workflows. These educational modules were created to cover different use cases for reality capture technology that are currently being used in the construction industry. They also show how reality capture plays a role in the larger virtual design in construction (BIM) process. Importantly, these labs were designed to be completed with the LiDAR scanner on a typical iPhone, which has lowered the barrier to entry for reality capture education and use in industry. While the initial teaching of these courses was done …

Instructional Systems Design And The Diffusion And Adoption Of Technology: (Volume 1), Miguel Ramlatchan (Author & Editor), Mark Parsons (Author), Meghan Soldani (Author), Josie Joswick Mendoza (Author), Maria Satre (Author), Brittany Spitz (Author), Jasmine Bundy (Author), Amanda Kline (Author)

Distance Learning Faculty & Staff Books

Instructional designers, instructional systems designers, and other educational technologists are, by their nature, innovators. These professionals apply and extend the applied science of learning, systems, communication, and instructional design theory to help students learn. Technology in some capacity is used to make the connections between subject matter experts, teachers, instructors, and their learners. It is common for instructional designers to seek new tools, techniques, and innovations for the improvement of learning, access, quality, and student satisfaction. However, the adoption and diffusion of new educational technology and innovation is a complex process that depends on many variables. Understanding these processes and …

Designing And Cnc Machine Valve Sub-Plates And Quick Mounts For Hydraulic Power Training Systems, Connor Maxam

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Connor Maxam on November 22, 2022.

Print3d, A Service-Learning Project For Improving Visually Impaired Accessibility Through Educational 3d Printing, Oscar R. Lozano

Journal of Pre-College Engineering Education Research (J-PEER)

Well-executed service-learning projects are a high-value educational element. However, these projects commonly focus on overused topics and unbalanced executions which can produce the opposite effect to that desired when working with groups of people with functional diversity. PRINT3D is a service-learning project aimed at improving accessibility for people with visual disabilities while helping primary and secondary school students learn basic engineering skills through 3D design and printing. Under the support of the European Erasmus+ Programme, this project brought together nongovernmental organizations, teacher professional development centers, business enterprises, and educational centers to collaborate for two school years. The project activities aimed …

Journal Of Roleplaying Studies And Steam (Jrpssteam) Vol. 1 [2022], Issue 1., Cristo Leon, James Lipuma, Ricardo Morales-Carbajal, Miguel A. Bastarrachea-Magnani, Alain Arriaga, Christian Miguel Rudich De La Rosa, Edgar Meritano, Mauricio Rangel

Journal of Roleplaying Studies and STEAM

Volumen completo del Journal of Roleplaying Studies and STEAM (JRPSSTEAM) Vol. 1 [2022], Issue 1.

Instructional Message Design: Theory, Research, And Practice (Volume 2), Miguel Ramlatchan, Elisa L. Shaffer, Marissa A. Jimenez, Spyridoula Tsouganatou, Yolanda Montague, Maria Satre, Brittney Heath, Bradley Sanders, Jim Shifflett, Meghan Soldani, Shuree Altantsetseg, Melissa Hatfield, Casey Kohler

Distance Learning Faculty & Staff Books

Message design is all around us, from the presentations we see in meetings and classes, to the instructions that come with our latest tech gadgets, to multi-million-dollar training simulations. In short, instructional message design is the real-world application of instructional and learning theories to design the tools and technologies used to communicate and effectively convey information. This field of study pulls from many applied sciences including cognitive psychology, industrial design, graphic design, instructional design, information technology, and human performance technology to name just a few. In this book we visit several foundational theories that guide our research, look at different …

Science, Technology, Engineering, And Mathematics (Stem) Project-Based Learning (Pbl) Education: A New Mexico Case Study For Equity And Inclusion, Kimberly A. Scheerer

Teacher Education, Educational Leadership & Policy ETDs

This research addresses how student participation in Science, Technology, Engineering, and Mathematics (STEM) project-based learning (PBL) education activities encourages underrepresented minority student achievement in STEM career field trajectories. Seven New Mexico high school counselors and 12 STEM organization personnel were interviewed during this study. Their responses represent the nuanced professional voices where New Mexico public education intersects with STEM student interest and cultural influence.

For students, STEM PBL can foster deep integration across educational disciplines and enhance STEM career trajectory interest and readiness. STEM education converged with PBL methodologies has the ability to leverage community support while broadening student networks. …

Ethics In Engineering Education: Is Abet Enough?, Alyssa Delouise

The Journal of Purdue Undergraduate Research

No abstract provided.

Online Proctoring’S Impact On Students And Student Privacy, Tessca Almeida

The Journal of Purdue Undergraduate Research

No abstract provided.

11th International Conference On Business, Technology And Innovation 2022, University For Business And Technology - Ubt

UBT International Conference

Welcome to IC – UBT 2022

UBT Annual International Conference is the 11th international interdisciplinary peer reviewed conference which publishes works of the scientists as well as practitioners in the area where UBT is active in Education, Research and Development. The UBT aims to implement an integrated strategy to establish itself as an internationally competitive, research-intensive university, committed to the transfer of knowledge and the provision of a world-class education to the most talented students from all background. The main perspective of the conference is to connect the scientists and practitioners from different disciplines in the same place and make …

Design Artifacts As Externalized Mental Models Of Children’S Science Concept Development, Christine Mcgrail

Doctoral Dissertations

The Next Generation Science Standards (NGSS) calls for the integration of the practices of science and engineering across all science disciplines beginning in the early elementary grades. Science and engineering education research has determined that engineering design is a productive means for promoting understanding of science concepts. However, design artifacts created during engineering design problem-solving have not received sufficient attention for their potential to embody children’s science understanding. The aim of this study was to examine how conceptual development of the concepts of force and motion was instantiated in design artifacts by early elementary age children engaged in engineering design. …

فاعلية نظام مساعد للتنقل باستخدام وحدة إظهار حسية من وجهة نظر المكفوفين لدى عينة من الطلبة المكفوفين في جامعة دمشق. Impact Of A Mobility Assistant System Using A Sensory Display From The Perspective Of The Blind Among A Sample Of Blind Students At Damascus University, حسن أبو النور, ماهر العلاوي

Association of Arab Universities Journal for Education and Psychology

تهدف هذه الدراسة إلى معرفة مدى فاعلية نظام مساعد للمكفوفين في كشف العوائق المحيطة بهم، وكذلك قياس مدى تكيفهم معه، والتعرف على آرائهم حول تصميمه، لدى عينة من طلبة جامعة دمشق المكفوفين، والمقيمين في المدينة الجامعية. تكونت عينة الدراسة من(32) طالباً، وطالبة، منهم (17) طالباً و(15) طالبةً. قام الباحث بتصميم نظام مساعدة الكترونية، لمساعدة المكفوفين في الكشف المكاني للعوائق، حيث قام الباحث بتدريب أفراد العينة بشكل كافٍ على نظام المساعدة. كما تمّ تصميم أداة للتعرف على مدى فاعلية نظام المساعدة للمكفوفين في التنقل، باستخدام وحدة الإظهار, واستخرج الخصائص السيكومترية للصدق، والثبات. وأسفرت الدراسة عن نتائج، من أهمها: وجود مستوى كبير …

Student Perceptions Of Meaningful Learning, Behaviors Towards Learning Experiences, And Academic Performance In Aeronautical Courses: A Quantitative Research Study, Andrea Lynn Smith

Doctoral Dissertations and Projects

Current literature on the predictive correlation between a student’s perceived course value and their end-of-course results utilizing the Course Valuing Inventory (Nehari & Bender, 1978) has not been studied in aeronautics education. While research investigating various attributes of academic success exists, quantitative studies specifically addressing predictive variables of course success related to end-of-course grades in aeronautics education do not exist. Given the results of quantitative data, aeronautics academia can strategically implement specific variables into course planning and designing to create academic content that appeals to aeronautic students. The purpose of this quantitative, predictive correlational study is to examine the predictive …

The Rock 2022, School Of Engineering And Computer Science

The Rock

No abstract provided.

Santa Clara Magazine, Volume 63 Number 2, Fall 2022 [Print Issue 62:2], Santa Clara University

Santa Clara Magazine

14 - AFTER THE CANNONBALL What does it mean to wrestle with your own human limitations and vulnerability as you follow the footsteps of a saint? Hung Pham, S.J.

18 - GROWING When I was little, there seemed to be this nondescript era of life, a foggy “someday,” when becoming an adult just happened. Nikhita Panjnani ’24.

20 - HOW IT STARTED, HOW IT'S GOING For decades, the internet has shaped the way we communicate, but two years of being extremely online hit fast forward on its real-world impact. Matt Morgan.

26 - NURTURING NATURE A story in two stories: …